* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from: 9f586700ec4ceac97fd47cd799878a8847342ffa
* g10/keyserver.c (keyserver_import_fprint_ntds): New.
* g10/getkey.c (get_pubkey_byname): Detect an attempt to search by
fingerprint in no_local mode.
--
See the man page. For testing use
gpg --auto-key-locate local,wkd,keyserver --locate-external-key \
FINGERPRINT
with at least one LDAP keyserver given in dirmngr.conf. On Windows
"ntds" may be used instead or in addtion to "keyserver".
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Print a SOURCE status.
* g10/options.h (opts): New field expl_import_self_sigs_only.
* g10/import.c (parse_import_options): Set it.
* g10/keyserver.c (keyserver_get_chunk): Add special options for LDAP.
--
I can be assumed that configured LDAP servers are somehow curated and
not affected by rogue key signatures as the HKP servers are. Thus we
can allow the import of key signature from LDAP keyservers by default.
GnuPG-bug-id: 5387
--
The tpm2d patches introduced a new --edit-key command: keytotpm. Add
a descriptive entry explaining what it does and how it works.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* g10/gpg.c (oForceSignKey,opts): New option "--force-sign-key".
(main): Set it.
* g10/options.h (opt): New flag flags.force_sign_key.
* g10/keyedit.c (sign_uids): Use new flag.
--
GnuPG-bug-id: 4584
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* dirmngr/ldap-parse-uri.c (ldap_parse_uri): Support a new gpgNtds
extension.
* dirmngr/ks-engine-ldap.c (my_ldap_connect): Do ldap_init always with
hostname - which is NULL and thus the same if not given. Fix minor
error in error code handling.
--
Note that "gpgNtds" is per RFC-4512 case insensitive and has not yet
been officially regisetered. Thus for correctness the OID can be
used:
1.3.6.1.4.1.11591.2.5 LDAP URL extensions
1.3.6.1.4.1.11591.2.5.1 gpgNtds=1 (auth. with current user)
Note that the value must be 1; all other values won't enable AD
authentication and are resevered for future use.
This has been cherry-picked from the 2.2 branch,
commit 55f46b33df08e8e0ea520ade5f73b321bc01d705
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* g10/gpg.c (oPrintPKARecords): Remove.
(opts): Remove --print-pka-records.
(main): Remove "pka-lookups","pka-trust-increase" and other PKA stuff.
* g10/options.h (EXPORT_DANE_FORMAT): Remove.
(VERIFY_PKA_LOOKUPS, VERIFY_PKA_TRUST_INCREASE): Remove.
(KEYSERVER_HONOR_PKA_RECORD): Remove.
* g10/packet.h (pka_info_t): Remove.
(PKT_signature): Remove flags.pka_tried and pka_info.
* g10/parse-packet.c (register_known_notation): Remove
"pka-address@gnupg.org".
* g10/pkclist.c (check_signatures_trust): Remove PKA stuff.
* g10/call-dirmngr.c (gpg_dirmngr_get_pka): Remove.
* g10/export.c (parse_export_options): Remove "export-pka".
(do_export): Adjust for this.
(write_keyblock_to_output): Ditto.
(do_export_stream): Ditto.
(print_pka_or_dane_records): Rename to ...
(print_dane_records): this and remove two args. Remove PKA printing.
* g10/free-packet.c (free_seckey_enc, cp_pka_info): Adjust for removed
pka_info field.
* g10/getkey.c (get_pubkey_byname): Make AKL_PKA a dummy.
* g10/keyserver.c: Remove "honor-pka-record".
(keyserver_import_pka): Remove.
* g10/mainproc.c (get_pka_address): Remove.
(pka_uri_from_sig): Remove.
(check_sig_and_print): Remove code for PKA.
--
PKA (Public Key Association) was a DNS based key discovery method
which looked up fingerprint by mail addresses in the DNS. This goes
back to the conference where DKIM was suggested to show that we
already had a better method for this available with PGP/MIME. PKA was
was later superseded by an experimental DANE method and is today not
anymore relevant. It is anyway doubtful whether PKA was ever widely
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Add parameters for batch generation of ECC keys.
--
There are parameters required for batch generation of ECC keys which
weren't mentioned in the documentation.
Signed-off-by: Jens Meißner <meissner@b1-systems.de>
* g10/gpg.c (parse_list_options): Add "sort-sigs".
(main): Make it the default.
* g10/options.h (LIST_SORT_SIGS): New.
* g10/keylist.c (cmp_signodes): New.
(list_keyblock_print): Sort signatures and factor signature printing
code out to ...
(list_signature_print): new.
--
In particular together with --full-timestamps this makes it easier to
see the history of key signatures and their revocations. The
self-signatures are also printed first. To disable this
--list-options no-sort-sigs
can be used.
Also don't print the annoying "no recocation reason specified"
message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_BULK): New.
* g10/import.c (parse_import_options): Add "bulk-import".
* g10/call-keyboxd.c (in_transaction): New var.
(gpg_keyboxd_deinit_session_data): Run a commit if in bulk import
mode.
(create_new_context): Run a begin transaction if in bulk import mode.
--
Initial tests with this option are not very promising. Importing
about 3000 real world keys with --use-keyboxd and full logging took:
real 33m31.724s
user 19m54.265s
sys 2m49.662s
With bulk-import this saves a mere 12%:
real 29m36.542s
user 19m3.391s
sys 2m46.728s
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid. Delay setting of homedir until the new
chuid is done.
* sm/gpgsm.c (main): Delay setting of homedir until the new chuid is
done.
* tools/gpg-card.c (oChUid): New.
(opts): Add --chuid.
(changeuser): New helper var.
(main): Implement --chuid.
* tools/gpg-connect-agent.c (oChUid): New.
(opts): Add --chuid.
(main): Implement --chuid.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Add failsafe check for PK.
Pass KEYBLOCK down do check_signatures_trust. Protect existsing error
ocde in case the signature expired.
* g10/pkclist.c (is_in_sender_list): New.
(check_signatures_trust): Add args keyblock and pk. Add new uid based
checking code.
* g10/test-stubs.c, g10/gpgv.c: Adjust stubs.
--
GnuPG-bug-id: 4735
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well
as long key ID.
* doc/gpg.texi: document that --trusted-key can accept a fingerprint.
--
GnuPG-bug-id: 4855
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Fixed uses or return and kept the old string to avoid breaking
translations.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_KEY_BLOCK): New.
* g10/gpg.c (oIncludeKeyBlock): New.
(opts): New option --include-key-block.
(main): Implement.
* g10/options.h (opt): New flag include_key_block.
* g10/parse-packet.c (dump_sig_subpkt): Support SIGSUBPKT_KEY_BLOCK.
(parse_one_sig_subpkt): Ditto.
(can_handle_critical): Ditto.
* g10/sign.c (mk_sig_subpkt_key_block): New.
(write_signature_packets): Call it for data signatures.
--
This patch adds support for a to be proposed OpenPGP ferature:
Introduce the Key Block subpacket to align OpenPGP with CMS.
This new subpacket may be used similar to the CertificateSet of
CMS (RFC-5652) and thus allows to start encrypted communication
after having received a signed message. In practice a stripped down
version of the key should be including having only the key material
and the self-signatures which are really useful and shall be used by
the recipient to reply encrypted.
#### Key Block
(1 octet with value 0, N octets of key data)
This subpacket MAY be used to convey key data along with a signature
of class 0x00, 0x01, or 0x02. It MUST contain the key used to create
the signature; either as the primary key or as a subkey. The key
SHOULD contain a primary or subkey capable of encryption and the
entire key must be a valid OpenPGP key including at least one User ID
packet and the corresponding self-signatures.
Implementations MUST ignore this subpacket if the first octet does not
have a value of zero or if the key data does not represent a valid
transferable public key.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (push_export_filters): New.
(pop_export_filters): New.
(export_pubkey_buffer): Add args prefix and prefixlen. Adjust
callers.
* g10/import.c (impex_filter_getval): Add property "fpr".
* g10/main.h (struct impex_filter_parm_s): Add field hexfpr.
--
The push and pop feature will help us to use the export filter
internally in gpg. Same for the export_pubkey_buffer change.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/import.c (import_one_real): Don't do the final clean in the
merge case.
--
This fixes a regression introduced with self-sigs-only.
GnuPG-bug-id: 4628
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_part): Add arg R_KEYGRIP and
support the special algo "card".
(parse_key_parameter_string): Add args R_KEYGRIP and R_SUBKEYGRIP.
Handle the "card" algo. Adjust callers.
(parse_algo_usage_expire): Add arg R_KEYGRIP.
(quickgen_set_para): Add arg KEYGRIP and put it into the parameter
list.
(quick_generate_keypair): Handle algo "card".
(generate_keypair): Also handle the keygrips as returned by
parse_key_parameter_string.
(ask_algo): Support ed25519 from a card.
--
Note that this allows to create a new OpenPGP key from an initialized
OpenPGP card or from any other supported cards. It has been tested
with the TCOS Netkey card. Right now a stub file for the cards might
be needed; this can be achieved by running "gpgsm --learn" with the
card plugged in.
Example:
gpg --quick-gen-key foo@example.org card
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add option.
(main): Set flag.
* g10/options.h: Add flags.use_only_openpgp_card.
* g10/call-agent.c (start_agent): Implement option.
--
With the previous patch we switch to autoselect an application
instead of requesting an openpgp card. This option allows to revert
this in case of use use cases which expected the former behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c185f6dfbd1bfd809369da789239a371e9d1610e)
This was first added to the 2.2 branch.
* g10/mainproc.c (check_sig_and_print): Print a hint on how to make
use of the preferred keyserver. Remove keyserver lookup just by the
keyid. Try a WKD lookup before a keyserver lookup.
--
The use of the the keyid for lookups does not make much sense anymore
since for quite some time we do have the fingerprint as part of the
signature.
GnuPG-bug-id: 4595
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Change default.
--
Due to the DoS attack on the keyeservers we do not anymore default to
import key signatures. That makes the keyserver unsuable for getting
keys for the WoT but it still allows to retriev keys - even if that
takes long to download the large keyblocks.
To revert to the old behavior add
keyserver-optiions no-self-sigs-only,no-import-clean
to gpg.conf.
GnuPG-bug-id: 4607
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aLocateExtKeys): New.
(opts): Add --locate-external-keys.
(main): Implement that.
* g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL.
(get_best_pubkey_byname): Add arg 'mode' and pass on to
get_pubkey_byname. Change callers.
* g10/keylist.c (public_key_list): Add arg 'no_local'.
(locate_one): Ditto. Pass on to get_best_pubkey_byname.
--
This new command is a shortcut for
--auto-key-locate nodefault,clear,wkd,... --locate-key
and uses the default or configured AKL list but does so without local.
See also
GnuPG-bug-id: 4599
Signed-off-by: Werner Koch <wk@gnupg.org>
