* g10/gpg.c (check_user_ids): If the search description describes a
keyid or fingerprint and ends in a '!', include the '!' in the
rewritten description.
* common/userids.c (classify_user_id): Accept keyids and fingerprints
ending in '!'.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Kristian Fiskerstrand
<kristian.fiskerstrand@sumptuouscapital.com>
Fixes-commit: f99830b7
Fixes-commit: e8c53fca
* common/stringhelp.c (utf8_charcount): Take additional parameter,
len. Process at most LEN bytes.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (check_user_ids): Differentiate between a second result
and an error. If the key specification is ambiguous or an error
occurs, set RC appropriately.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Werner Koch <wk@gnupg.org>
Suggested-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/options.h (opt): Add field only_sign_text_ids.
* g10/gpg.c (enum cmd_and_opt_values): Add value oOnlySignTextIDs.
(opts): Handle oOnlySignTextIDs.
(main): Likewise.
* g10/keyedit.c (sign_uids): If OPT.ONLY_SIGN_TEXT_IDS is set, don't
select non-text based IDs automatically.
(keyedit_menu): Adapt the prompt asking to sign all user ids according
to OPT.ONLY_SIGN_TEXT_IDS.
* doc/gpg.texi: Document the new option --only-sign-text-ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1241
Debian-bug-id: 569702
* g10/gpg.c (check_user_ids): New function.
(main): Check that any user id specifications passed to --local-user
and --remote-user correspond to exactly 1 user. Check that any user
id specifications passed to --default-key correspond to at most 1
user. Warn if any user id specifications passed to --local-user or
--default-user are possible ambiguous (are not specified by long keyid
or fingerprint).
* g10/getkey.c (parse_def_secret_key): Don't warn about possible
ambiguous key descriptions here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1128
Debian-debug-id: 544490
* g10/decrypt-data.c (decrypt_data): If OPT.UNWRAP_ENCRYPTION is set,
copy the data to the output file instead of continuing to process it.
* g10/gpg.c (enum cmd_and_opt_values): Add new value oUnwrap.
(opts): Handle oUnwrap.
(main): Likewise.
* g10/options.h (opt): Add field unwrap_encryption.
* g10/plaintext.c (handle_plaintext): Break the output file selection
functionality into ...
(get_output_file): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1060
Debian-bug-id: 282061
* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* configure.ac: Add option --dsiable-tofu and --disable-sqlite.
(NEED_SQLITE_VERSION): New var.
(USE_TOFU): New ac_define and am_conditional.
* autogen.sh (build-w32): Add PKG_CONFIG_LIBDIR to configure so that
pkg-config find the correct .pc file.
* g10/Makefile.am (tofu_source): New. Build only if enabled.
* g10/gpg.c (parse_trust_model)[!USE_TOFU]: Disable tofu models.
(parse_tofu_policy)[!USE_TOFU]: Disable all.
(parse_tofu_db_format)[!USE_TOFU]: Disable all.
(main) <aTOFUPolicy>[!USE_TOFU]: Skip.
* g10/keyedit.c (show_key_with_all_names_colon)[!USE_TOFU]: Do not
call tofu functions.
* g10/keylist.c (list_keyblock_colon)[!USE_TOFU]: Ditto.
* g10/trustdb.c (tdb_get_validity_core)[!USE_TOFU]: Skip tofu
processing.
--
This allows to build a minimal version of GnuPG. It is also currently
required to build for Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/revoke.c (gen_desig_revoke): Add additional parameter ctrl.
Check that the secret key is available. If not, display an error
message.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: 8459bcf9
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): test for --command-fd during --gen-key parse.
When --command-fd is set then imply --batch to let gpg inquire a
passphrase rather than requiring a pinentry.
* agent/gpg-agent.c (create_server_socket): Add arg "cygwin". Call
assuan_sock_set_flag if Assuan version is recent enough.
(main): Create ssh server socket with Cygwin flag set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Change arg for oDebug to a string.
(debug_flags): New; factored out from set_debug.
(set_debug): Remove "--debug-level help". Use parse_debug_flag to
print the used flags.
(main): Use parse_debug_flag for oDebug.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_t): New.
(kid_not_found_table, n_kid_not_found_table): New.
(kid_not_found_p, kid_not_found_insert, kid_not_found_flush): New.
(keydb_insert_keyblock): Flush the new cache.
(keydb_delete_keyblock): Ditto.
(keydb_update_keyblock): Ditto.
(keydb_search): Use the new cache.
(keydb_dump_stats): New.
* g10/gpg.c (g10_exit): Dump keydb stats.
--
What we do here is to keep track of key searches by long keyids (as
stored in all signatures) so that we do not need to scan the keybox
again after we already found that this keyid will result in
not-found. As soon as we change gpg to run as a co-process we should
store this table per session because other instances of gpg may have
updated the keybox without us knowing.
On a test ring with
gpg: 94721 good signatures
gpg: 6831 bad signatures
gpg: 150703 signatures not checked due to missing keys
gpg: 5 signatures not checked due to errors
gpg: keydb: kid_not_found_table: total: 14132
this new cache speeds a --check-sigs listing up from 28 minutes to
less than 3 minutes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbdump.c (list_trustdb): Add arg FP and change callers to pass
es_stdout.
* g10/tdbio.c (upd_hashtable): On a corrupted trustdb call
list_trustdb only in verbose > 1 mode and let it dump to stderr.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDebugIOLBF): new.
(opts): Add --debug-iolbf.
(main): Set option.
--
This option is convenient for debugging to make sure that debug output
to stderr is synced with output to stdout.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (DBG_LOOKUP_VALUE): Change to 8192.
* g10/options.h (DBG_LOOKUP_VALUE, DBG_LOOKUP): New.
* g10/getkey.c: Use DBG_LOOKUP instead of DBG_CACHE at most places.
* g10/gpg.c (aPrintPKARecords): Rename to oPrintPKARecords and do not
use it as a command.
* g10/keylist.c (list_keyblock): List PKA rceords also for secret
keys.
--
An option allows to use it more flexible. For example to select only
secret keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add command --print-pka-records.
* g10/options.h (struct opt): Add field "print_pka_records".
* g10/keylist.c (list_keyblock_pka): New.
(list_keyblock): Call it if new option is set.
(print_fingerprint): Add mode 10.
--
This is a fist step towards a slightly updated PKA implementation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use log_printf instead of stderr.
* g10/tdbdump.c (export_ownertrust): Use estream fucntions.
(import_ownertrust): Ditto.
* g10/tdbio.c (tdbio_dump_record): Ditto. Change arg to estream_t.
--
Reported-by: Guilhem Moulin <guilhem@fripost.org>
Needed for unattended key edits with --status-fd, because since 2.1
status prompts are preceded by es_fflush (in cpr.c:do_get_from_fd)
not fflush(3), so the standard output may not be flushed before each
prompt. (Which breaks scripts using select(2) to multiplex between
the standard and status outputs.)
His patch only affected print_and_check_one_sig_colon() but there are
many more places where stdio and estream are mixed. This patch now
replaces most of them in g10/. At some places stdio is still used,
but that is local to a function and should not have side effects.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (list_config): Replace print_sanitized_string2 by
es_write_sanitized.
* common/stringhelp.c (print_sanitized_buffer2): Remove.
(print_sanitized_buffer, print_sanitized_utf8_buffer): Remove.
(print_sanitized_utf8_buffer, print_sanitized_utf8_string): Remove.
(print_sanitized_string): Remove.
* sm/certdump.c (print_dn_part, print_dn_parts): Remove arg FP.
(pretty_print_sexp, gpgsm_print_name2, gpgsm_print_name): Remove.
--
Mixing stdio and estream is never a good idea. This fix also allows
us to remove a lot of garbage.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
GnuPG-bug-id: 1822
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Remove keyserver_options.other.
* g10/gpg.c (main): Obsolete option --honor-http-proxt.
* g10/keyserver.c (add_canonical_option): Replace by ...
(warn_kshelper_option): New.
(parse_keyserver_uri): Obsolete "x-broken-http".
--
Some of these options are deprecated for 10 years and they do not make
any sense without the keyserver helpers. For one we print a hint on
how to replace it:
gpg: keyserver option 'ca-cert-file' is obsolete; \
please use 'hkp-cacert' in dirmngr.conf
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/armor.c (parse_hash_header,carmor_filter): Ignore MD5 in hash
header.
(fake_packet): Remove pgp-2 workaround for white space stripping.
* g10/filter.h (armor_filter_context_t): Remove field pgp2mode.
* g10/options.h (opt): Remove field pgp2_workarounds.
* g10/gpg.c (main): Do not set this field.
* g10/gpgv.c (main): Ditto.
* g10/mainproc.c (proc_encrypted): Use SHA-1 as fallback s2k hash
algo. Using MD5 here is useless.
(proc_plaintext): Remove PGP-2 related woraround
(proc_tree): Remove another workaround but keep the one for PGP-5.
--
The removed code was either not anymore used or its use would have
caused an error message later anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* g10/build-packet.c (do_key): Remove support for building v3 keys.
* g10/parse-packet.c (read_protected_v3_mpi): Remove.
(parse_key): Remove support for v3-keys. Add dedicated warnings for
v3-key packets.
* g10/keyid.c (hash_public_key): Remove v3-key support.
(keyid_from_pk): Ditto.
(fingerprint_from_pk): Ditto.
* g10/options.h (opt): Remove fields force_v3_sigs and force_v4_certs.
* g10/gpg.c (cmd_and_opt_values): Remove oForceV3Sigs, oNoForceV3Sigs,
oForceV4Certs, oNoForceV4Certs.
(opts): Turn --force-v3-sigs, --no-force-v3-sigs, --force-v4-certs,
--no-force-v4-certs int dummy options.
(main): Remove setting of the force_v3_sigs force_v4_certs flags.
* g10/revoke.c (gen_revoke, create_revocation): Always create v4 certs.
* g10/sign.c (hash_uid): Remove support for v3-signatures
(hash_sigversion_to_magic): Ditto.
(only_old_style): Remove this v3-key function.
(write_signature_packets): Remove support for creating v3-signatures.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
(clearsign_file): Ditto. Remove code to emit no Hash armor line if
only v3-keys are used.
(make_keysig_packet): Remove arg SIGVERSION and force using
v4-signatures. Change all callers to not pass a value for this arg.
Remove all v3-key related code.
(update_keysig_packet): Remove v3-signature support.
* g10/keyedit.c (sign_uids): Always create v4-signatures.
* g10/textfilter.c (copy_clearsig_text): Remove arg pgp2mode and
change caller.
--
v3 keys are deprecated for about 15 years and due the severe
weaknesses of MD5 it does not make any sense to keep code around to
use these old and broken keys. Users who need to decrypt old messages
should use gpg 1.4 and best re-encrypt them to modern standards.
verification of old (i.e. PGP2) created signatures is thus also not
anymore possible but such signatures have no values anyway - MD5 is
just too broken.
We have also kept support for v3 signatures until now. With the
removal of support for v3 keys it is questionable whether it makes any
sense to keep support for v3-signatures. What we do now is to keep
support for verification of v3-signatures but we force the use of
v4-signatures. The latter makes the --pgp6 and --pgp7 switch a bit
obsolete because those PGP versions require v3-signatures for
messages. These versions of PGP are also really old and not anymore
maintained so they have not received any bug fixes and should not be
used anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Added --enable-large-secmem option.
* g10/options.h: Add opt.flags.large_rsa.
* g10/gpg.c: Contingent on configure option: adjust secmem size,
add gpg --enable-large-rsa, bound to opt.flags.large_rsa.
* g10/keygen.c: Adjust max RSA size based on opt.flags.large_rsa
* doc/gpg.texi: Document --enable-large-rsa.
--
This is a cherry-pick of 534e2876ac from
STABLE-BRANCH-1-4 against master
Some older implementations built and used RSA keys up to 16Kib, but
the larger secret keys now fail when used by more recent GnuPG, due to
secure memory limitations.
Building with ./configure --enable-large-secmem will make gpg
capable of working with those secret keys, as well as permitting the
use of a new gpg option --enable-large-rsa, which let gpg generate RSA
keys up to 8Kib when used with --batch --gen-key.
Debian-bug-id: 739424
Minor edits by wk.
GnuPG-bug-id: 1732
* g10/gpg.c (aFullKeygen): New.
(opts): Add command --full-key-gen.
(main): Implement it.
* g10/keygen.c (DEFAULT_STD_ALGO): Replace wrong GCRY_PK_RSA although
the value is identical.
(DEFAULT_STD_CURVE): New.
(DEFAULT_STD_SUBALGO): New.
(DEFAULT_STD_SUBKEYSIZE): New.
(DEFAULT_STD_SUBCURVE): New.
(quick_generate_keypair): Use new macros here.
(generate_keypair): Add arg "full" and fix call callers. Do not ask
for keysize in non-full node.
(ask_user_id): Add arg "full" and simplify for non-full mode.
* g10/gpg.c (main): Pass option names to obsolete_option without
double dash.
* g10/misc.c (obsolete_option, obsolete_scdaemon_option): Print double
dash only for command line options.
* g10/gpg.c: Add config options that should belong in scdaemon.conf
* g10/main.h, g10/misc.c (obsolete_scdaemon_option): New.
--
In gpg2, the following options are only relevant for scdaemon:
reader-port
ctapi-driver
pcsc-driver
disable-ccid
but in gpg1, they are options for gpg itself.
Some users of gpg1 might have these options in their
~/.gnupg/gpg.conf, which causes gpg2 to fail hard if it reads that
config file.
gpg2 should not fail hard, though giving a warning (and suggesting a
move to scdaemon.conf) seems OK.
This patch does *not* reintroduce any documentation for these options
in gpg.texi, even to indicate that they are "dummy" options, since
scdaemon.texi contains the appropriate documentation.
Debian-bug-id: 762844
- Program names factored out from obsolete_scdaemon_option to make
reuse without new translations easier. -wk
* g10/gpg.c (print_mds): Replace openpgp_md_test_algo.
--
This is actually not required because as of now the used OpenPGP and
Gcrypt hash algorithm numbers are identical. But that might change in
the future.
This changes the behavior of GnuPG in case it has been build with
some algorithms disabled: If those algorithms are available in
Libgcrypt, their results will be used printed anyway.
* g10/main.h (DEFAULT_CIPHER_ALGO): Chhange to AES or CAST5 or 3DES
depending on configure option.
* g10/gpg.c (main): Set opt.s2k_cipher_algo to DEFAULT_CIPHER_ALGO.
* g10/gpg.c (oRFC1991, oPGP2): Remove
(opts): Remove --pgp2 and --rfc1991.
* g10/options.h (CO_PGP2, CO_RFC1991): Remove. Remove all users.
(RFC2440, PGP2): Remove. Remove all code only enabled by these
conditions.
* tests/openpgp/clearsig.test: Remove --rfc1991 test.
--
The use of PGP 2.c is considered insecure for quite some time
now (e.g. due to the use of MD5). Thus we remove all support for
_creating_ PGP 2 compatible messages.
* g10/gpg.c (oCompressKeys, oCompressSigs): Remove.
(opts): Turn --compress-keys and --compress-signs in NOPs.
* g10/options.h (opt): Remove fields compress_keys and compress_sigs.
* g10/export.c (do_export): Remove compress_keys feature.
* g10/sign.c (sign_file): Remove compress_sigs feature.
--
These features are disabled in GnuPG since the very early days and
they fulfill no real purpose. For now we keep the command line
options as dummys.
* g10/gpg.c (aQuickKeygen): New.
* g10/misc.c (is_valid_user_id): New stub.
* g10/keygen.c (quickgen_set_para): New.
(quick_generate_keypair): New.
--
Note that the validation of the specified user id has not yet been
implemented.
* g10/gpg.c: Add option --with-secret.
* g10/options.h (struct opt): Add field with_secret.
* g10/keylist.c (public_key_list): Pass opt.with_secret to list_all
and list_one.
(list_all, list_one): Add arg mark_secret.
(list_keyblock_colon): Add arg has_secret.
* sm/gpgsm.c: Add option --with-secret.
* sm/server.c (option_handler): Add option "with-secret".
* sm/gpgsm.h (server_control_s): Add field with_secret.
* sm/keylist.c (list_cert_colon): Take care of with_secret. Also move
the token string from the wrong field 14 to 15.
--
This option is useful for key managers which need to know whether a
key has a secret key. This change allows to collect this information
in one pass.
* g10/tdbio.c (tdbio_set_dbname): Add arg R_NOFILE.
* g10/trustdb.c (trustdb_args): Add field no_trustdb.
(init_trustdb): Set that field.
(revalidation_mark): Take care of a nonexistent trustdb file.
(read_trust_options): Ditto.
(tdb_get_ownertrust): Ditto.
(tdb_get_min_ownertrust): Ditto.
(tdb_update_ownertrust): Ditto.
(update_min_ownertrust): Ditto.
(tdb_clear_ownertrusts): Ditto.
(tdb_cache_disabled_value): Ditto.
(tdb_check_trustdb_stale): Ditto.
(tdb_get_validity_core): Ditto.
* g10/gpg.c (main): Do not create a trustdb with most commands for
trust-model always.
--
This slightly changes the semantics of most commands in that they
won't create a trustdb if --trust-model=always is used. It just does
not make sense to create a trustdb if there is no need for it.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 1a0eeaacd1)
Resolved conflicts:
NEWS
g10/trustdb.c: Manually apply changes due to changed
function names.
Note that this also includes the fix for clear_ownertrust, see
GnuPG-bug-id: 1622.
* configure.ac: Add option --disable-trust-models
(NO_TRUST_MODELS): New ac_define and am_conditional.
* g10/Makefile.am (trust_source): New.
(gpg2_SOURCES): Factor some files out to above. Add trust.c.
* g10/gpg.c [NO_TRUST_MODELS]: Disable options --export-ownertrust,
--import-ownertrust, --update-trustdb, --check-trustdb, --fix-trustdb,
--list-trustdb, --trustdb-name, --auto-check-trustdb,
--no-auto-check-trustdb, and --force-ownertrust.
(parse_trust_model) [NO_TRUST_MODELS]: Do not build.
(main) [NO_TRUST_MODELS]: Set trust_model to always and exclude all
trustdb related option code.
* g10/keyedit.c (cmds) [NO_TRUST_MODELS]: Remove menu items "trust",
"enable", and "disable".
* g10/keylist.c (public_key_list) [NO_TRUST_MODELS]: Do not print
"tru" record.
* g10/trust.c: New.
* g10/trustdb.c (struct key_item): Move to trustdb.h.
(register_trusted_keyid): Rename to tdb_register_trusted_keyid.
(register_trusted_key): Rename to tdb_register_trusted_key.
(trust_letter, uid_trust_string_fixed, trust_value_to_string)
(string_to_trust_value, get_ownertrust_with_min, get_ownertrust_info)
(get_ownertrust_string, get_validity_info, get_validity_string)
(clean_sigs_from_uid, clean_uid_from_key, clean_key): Move to trust.c.
(mark_usable_uid_certs): Move to trust.c and make global.
(is_in_klist): Move as inline to trustdb.h.
(trustdb_check_or_update): Rename to tdb_check_or_update
(revalidation_mark): Rename to tdb_revalidation_mark.
(get_ownertrust): Rename to tdb_get_ownertrust.
(get_min_ownertrust): Rename to tdb_get_min_ownertrust.
(update_ownertrust): Rename to tdb_update_ownertrust.
(clear_ownertrusts): Rename to tdb_clear_ownertrusts.
(cache_disabled_value): Rename to tdb_cache_disabled_value.
(check_trustdb_stale): Rename to tdb_check_trustdb_stale.
(get_validity): Rename to tdb_get_validity_core, add arg MAIN_PK and
factor some code out to ...
* trust.c (get_validity): ...new.
(check_or_update_trustdb): New wrapper.
(revalidation_mark): New wrapper.
(get_ownertrust): New wrapper.
(get_ownertrust_with_min): New wrapper.
(update_ownertrust): New wrapper.
(clear_ownertrusts): New wrapper.
(cache_disabled_value): New wrapper.
(check_trustdb_stale): New wrapper.
* tests/openpgp/defs.inc (opt_always): New. Use in all tests instead
of --always-trust.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (openpgp_pk_algo_name): Return a different string for
each ECC algorithm.
* g10/gpg.c (build_list_pk_test_algo): New wrapper to cope with the
different algo type enums.
(build_list_pk_algo_name): Ditto.
(build_list_cipher_test_algo): Ditto.
(build_list_cipher_algo_name): Ditto.
(build_list_md_test_algo): Ditto.
(build_list_md_algo_name): Ditto.
(my_strusage): Use them.
(list_config): Ditto. Add "pubkeyname".
(build_list): Add letter==1 hack.
* g10/options.h (opt): Rename field no_version to emit_version.
* g10/gpg.c (main): Init opt.emit_vesion to 1. Change --emit-version
to bump up opt.emit_version.
* g10/armor.c (armor_filter): Implement different --emit-version
values.
--
GnuPG-bug-id: 1572
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* g10/gpg.c (build_list): Rewrite to cope with buffer overflow in
certain locales.
--
This fixes an obvious bug in locales where the translated string is
longer than the original. The bug could be exhibited by using
LANG=ru_RU.utf8 gpg -v --version.
En passant we also removed the trailing white space on continued
lines.
Reported-by: Dmitry V. Levin" <ldv at altlinux.org>
(cherry picked from commit 3402a84720)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
* common/logging.c (log_clock): New.
* g10/gpg.c (set_debug): Print clock debug flag.
* g10/options.h (DBG_CLOCK_VALUE, DBG_CLOCK): New.
--
To actually use log_clock you need to enable the code in
logginc.c:log_check() and link against librt. --debug 4096 may then
be used to enable it at runtime.
* kbx/keybox-defs.h (_keybox_write_header_blob): Move prototype to ..
* kbx/keybox.h: here.
* kbx/keybox-init.c (keybox_lock): Add dummy function
* g10/keydb.c: Include keybox.h.
(KeydbResourceType): Add KEYDB_RESOURCE_TYPE_KEYBOX.
(struct resource_item): Add field kb.
(maybe_create_keyring_or_box): Add error descriptions to diagnostics.
Add arg IS_BOX. Write a header for a new keybox file.
(keydb_add_resource): No more need for the force flag. Rename the
local variable "force" to "create". Add URL scheme "gnupg-kbx". Add
magic test to detect a keybox file. Add basic support for keybox.
(keydb_new, keydb_get_resource_name, keydb_delete_keyblock)
(keydb_locate_writable, keydb_search_reset, keydb_search2): Add
support for keybox.
(lock_all, unlock_all): Ditto.
* g10/Makefile.am (needed_libs): Add libkeybox.a.
(gpg2_LDADD, gpgv2_LDADD): Add KSBA_LIBS as a workaround.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_PRIMARY)
KEYDB_RESOURCE_FLAG_DEFAULT, KEYDB_RESOURCE_FLAG_READONLY): New.
* g10/gpg.c, g10/gpgv.c (main): Use new constants.
--
I did most of these changes back in 2011 and only cleaned them up
now. More to follow soon.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
This works by specifying the keygrip instead of an algorithm (section
number 13) and requires that the option -expert has been used. It
will be easy to extend this to the primary key.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
Import and export of secret keys does now work. Encryption has been
fixed to be compatible with the sample messages.
This version tests for new Libgcrypt function and thus needs to be
build with a new Libgcrypt installed.
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
* configure.ac: Remove Camellia restriction.
* gpg.c (main), misc.c (openpgp_cipher_test_algo): Remove Camellia
restriction.
* misc.c (map_cipher_openpgp_to_gcry), main.h: Add macros for
openpgp_cipher_open, openpgp_cipher_get_algo_keylen, and
openpgp_cipher_get_algo_blklen to wrap around the corresponding gcry_*
functions, but pass the algorithm number through
map_cipher_openpgp_to_gcry. This is needed in case the gcry algorithm
number doesn't match the OpenPGP number (c.f. Camellia).
* encr-data.c, pubkey-enc.c, mainproc.c, cipher.c, encode.c, seskey.c,
passphrase.c, seckey-cert.c: Use new openpgp_cipher_* macros here.
Neal H. Walfield