* g10/delkey.c (do_delete_key): Don't delete the keyblock on dry runs.
Do not clear the ownertrust. Do not let the agent delete the key.
--
Co-authored-by: Matheus Afonso Martins Moreira
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Add flags.dummy_outfile.
* g10/decrypt.c (decrypt_message): Set this global flag instead of the
fucntion local flag.
* g10/plaintext.c (get_output_file): Ignore opt.output if that was
used as a dummy option aslong with --use-embedded-filename.
--
The problem here was that an explicit specified --decrypt, as
meanwhile suggested, did not work with that dangerous
--use-embedded-filename. In contrast it worked when gpg decrypted as
a side-effect of parsing the data.
GnuPG-bug-id: 4500
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/exec.c (w32_system): Add "!ShellExecute" special.
* g10/photoid.c (get_default_photo_command): Use the new ShellExecute
under Windows and fallbac to 'display' and 'xdg-open' in the Unix
case.
(show_photos): Flush stdout so that the output is shown before the
image pops up.
--
For Unix this basically syncs the code with what we have in gpg 1.4.
Note that xdg-open may not be used when running as root which we
support here.
For Windows we now use ShellExecute as this seems to be preferred over
"cmd /c start"; however this does not solve the actual problem we had
in the bug report. To solve that problem we resort to a wait
parameter which defaults to 400ms. This works on my Windows-10
virtualized test box. If we can figure out which simple viewers are
commonly installed on Windows we should enhance this patch to test for
them.
GnuPG-bug-id: 4334
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (cleartext_secret_key_to_openpgp): ignore trailing
sublists in private-key S-expression.
--
When gpg-agent learns about a private key from its ssh-agent
interface, it stores its S-expression with the comment attached. The
export mechanism for OpenPGP keys already in cleartext was too brittle
because it would choke on these comments. This change lets it ignore
any additional trailing sublists.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gnupg-Bug-Id: 4490
* g10/keyserver.c (keyserver_search): Remove a specialized error
message.
--
Dirmngr comes with a default keyserver and the suggestion to use
gpg --keyserver
is not good because that option is deprecated. An error message
"No keyserver available" is sufficient.
GnuPG-bug-id: 4512
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (update_keysig_packet): Convert digest algo when needed.
--
Several gpg commands try to keep most properties of a key signature
when updating (i.e. creating a new version of a key signature). This
included the use of the current hash-algorithm. This patch changes
this so that SHA-1 or RMD160 are replaced by SHA-256 if
possible (i.e. for RSA signatures). Affected commands are for example
--quick-set-expire and --quick-set-primary-uid.
GnuPG-bug-id: 4508
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_signature): Take only the addrspec from a
Signer's UID subpacket.
--
This is to address a problem in the currentr OpenKeychain which put
the entire UID into the subpacket. For example our Tofu code can only
use the addrspec and not the entire UID.
Reported-by: Wiktor Kwapisiewicz <wiktor@metacode.biz>
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Set new.uid always
to NULL after use.
--
pubkey_cmp is not guranteed to set new.uid.
So if the diff < 0 case is reached best is set to new.
If then diff > 0 is reached without modifying new.uid
e.g. if the key has no matching mboxes. new.uid is
free'd even though the uid is still referenced in
best.
GnuPG-Bug-Id: T4462
(cherry picked from commit e57954ed278cb5e6e725005b1ecaf7ce70006ce0)
* g10/keyserver.c (keyserver_import_wkd): Clear NO_ARMOR.
--
We may even adjust the specs to allow that. It should not be a
problem for any OpenPGP implementation because armored keys are very
common and de-armoring code is de-facto a mandatory feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Limit the number of considered keys to 5.
(import_one): Return the first fingerprint in case of WKD.
--
The Web Key Directory should carry only one key. However, some
providers like to put old or expired keys also into the WKD. I don't
thunk that this is a good idea but I heard claims that this is needed
for them to migrate existing key data bases.
This patch puts a limit on 5 on it (we had none right now) and also
fixes the issue that gpg could not work immediately with the requested
key because the code uses the fingerprint of the key to use the
imported key. Now the first key is used. On a second try (w/o
accessing the WKD) the regular key selection mechanism would be in
effect. I think this is the most conservative approach. Let's see
whether it helps.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.
--
Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit af3efd149f555d36a455cb2ea311ff81caf5124c)
* g10/keygen.c (ask_curve): Change algo ID to ECDSA if it changed from
an EdDSA curve.
--
(cherry picked from commit 4324560b2c0bb76a1769535c383424a042e505ae)
This change matters when it is called from ask_card_keyattr.
Some-comments-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/parse-packet.c (parse_key): Return GPG_ERR_UNKNOWN_VERSION
instead of invalid packet.
* g10/keydb.c (parse_keyblock_image): Do not map the unknown version
error to invalid keyring.
(keydb_search): Skip unknown version errors simlar to legacy keys.
* g10/keyring.c (keyring_rebuild_cache): Skip keys with unknown
versions.
* g10/import.c (read_block): Handle unknown version.
--
When using gpg 2.3 the local keyring may contain v5 keys. This patch
allows the use of such a keyring also with a 2.2 version which does
not support v5 keys. We will probably need some more tweaking here
but this covers the most common cases of listing keys and also
importing v5 keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (NODE_TRANSFER_SECKEY): New.
(import): Add attic kludge.
(transfer_secret_keys): Add arg only_marked.
(resync_sec_with_pub_keyblock): Return removed seckeys via new arg
r_removedsecs.
(import_secret_one): New arg r_secattic. Change to take ownership of
arg keyblock. Implement extra secret key import logic. Factor some
code out to ...
(do_transfer): New.
(import_matching_seckeys): New.
--
The PGP desktops exported secret keys are really stupid. And they
even a have kind of exception in rfc4880 which does not rule that
out (section 11.2):
[...] Implementations SHOULD include self-signatures on any user
IDs and subkeys, as this allows for a complete public key to be
automatically extracted from the transferable secret key.
Implementations MAY choose to omit the self-signatures, especially
if a transferable public key accompanies the transferable secret
key.
Now if they would only put the public key before the secret
key. Anyway we now have a workaround for that ugliness.
GnuPG-bug-id: 4392
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 5205512fc092c53c0a52c8379ef2a129ce6e58a9)
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f799e9728bcadb3d4148a47848c78c5647860ea4)
* g10/keyedit.c (show_basic_key_info): New arg 'print_sec'. Remove
useless code for "sub" and "ssb".
* g10/import.c (import_one): Pass FROM_SK to show_basic_key_info. Do
not print the first keyinfo in FROM_SK mode.
printing.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f64477db86568bdc28c313bfeb8b95d8edf05a3c)
* g10/cpr.c (write_status_printf): Escape CR and LF.
* g10/import.c (print_import_check): Simplify by using
write_status_printf and hexfingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
Fixed one conlict in a comment.
* g10/keylist.c (print_key_line): Print a warning for invalid algos.
--
Non-OpenPGP compliant keys now show a warning flag on the sec or pub
line like in:
gpg: can't encode a 256 bit MD into a 88 bits frame, algo=8
sec cv25519 2019-01-30 [INVALID_ALGO]
4239F3D606A19258E7A88C3F9A3F4F909C5034C5
uid [ultimate] ffffff
Instead of showing the usage flags "[CE]". Without this patch only
the error message is printed and the reason for it was not immediately
obvious (cv25519 is encryption only but we always consider the primary
key as having the "C" flag).
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit db87132b10664718b7db6ec1dad584b54d1fb265)
* g10/gpgcompose.c (literal_name): Complain if passed zero arguments,
not one or fewer.
--
Cherry-picked master commit of:
1ed21eee79749b976b4a935f2279b162634e9c5e
Signed-off-by: Neal H. Walfield <neal@walfield.org>
* g10/misc.c (map_pk_gcry_to_openpgp): Add EdDSA mapping.
--
Due to this missing mapping a "gpg --export --full-gen-key" with
selection "13 - Existing key" did not worked for an ed25519 key.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 346a98fabe03adf2e202e36fc2aa24b1c2571154)
* g10/misc.c (openpgp_pk_test_algo2): Add extra check.
--
The problem is that --key-gen --batch with a parameter file didn't
detect that Elgamal is not capable of signing and so an error was only
triggered at the time the self-signature was created. See the code
comment for details.
GnuPG-bug-id: 4329
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f97dc55ff1b041071bc3cbe98aa761bf77bb7ac8)
* g10/keylist.c (print_pubkey_info): Reverse the condition.
--
This mistakes were introduced when replacing by estream.
It resulted 'gpg --card-status' from a process with no controlling
terminal fails.
Fixes-commit: fb2ba98963beea249474f5d6d7345cf9b4b7f570
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit e154fba30ba0d5f29040a33f5c1b5c25b441b69f)
* g10/gpg.c (parse_list_options): Add option "show-only-fpr-mbox".
* g10/options.h (LIST_SHOW_ONLY_FPR_MBOX): New.
* g10/keylist.c (list_keyblock_simple): New.
(list_keyblock): Call it.
(list_all): Do not print the keyring name in LIST_SHOW_ONLY_FPR_MBOX
mode.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 0e8bf204791ebfd0c9a8e4b49fbadf998ec62e49)
* g10/keylist.c (list_keyblock_simple): Remove optional arg from
mailbox_from_userid
* g10/mainproc.c (proc_plaintext): Do not enable hash contexts when
opt.skip_verify is set.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
(cherry picked from commit 73e74de0e33bbb76300f96a4174024779047df06)
* g10/keyid.c (keygrip_from_pk): Print the fingerprint on failure.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit cd64af003d4b6b46b69dbd575f73d53359ae0bcc)
* g10/tdbio.c (tdbio_update_version_record): Never store a TOFU model.
(create_version_record): Don't init as TOFU.
(tdbio_db_matches_options): Don't indicate a change in case TOFU is
stored in an old trustdb file.
--
This change allows to switch between a tofu and pgp or tofu+pgp trust
model without an auto rebuild of the trustdb. This also requires that
the tofu trust model is requested on the command line. If TOFU will
ever be the default we need to tweak the model detection via TM_AUTO
by also looking into the TOFU data base,
GnuPG-bug-id: 4134
(cherry picked from commit 150a33df41944d764621f037038683f3d605aa3f)
* dirmngr/ks-engine-hkp.c (ks_hkp_search): Send SOURCE status also on
NO DATA error.
(ks_hkp_get): Ditto.
* g10/call-dirmngr.c (gpg_dirmngr_ks_search): Print "data source" info
also on error.
(gpg_dirmngr_ks_get): Ditto.
--
If a keyserver does not return any data it can be useful to know which
keyserver out of the pool answered.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit bee65edfbc8cc2c369e5941cc9d1a01a0519b388)
* g10/sig-check.c (check_signature_end_simple):
--
Obviously we should not ignore a back signature here.
Fixes-commit: 214b0077264e35c079e854a8b6374704aea45cd5
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit b6275f3bda8edff34274c5b921508567f491ab9c)
* g10/import.c (read_block): Call free_packet to skip the packet.
--
Cherry-pick of master commit of:
7c96cc67e108f3a9514a4222ffac2f9f9a2ab19e
Reported-by: Philippe Antoine
GnuPG-bug-id: 3916
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keygen.c (generate_keypair): Show more info.
--
GnuPG-bug-id: 3912
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 1bfe766bcf3959135333900934f1a15c9b96c3cf)
* g10/gpg.c (oKnownNotation): New const.
(opts): Add option --known-notation.
(main): Set option.
* g10/parse-packet.c (known_notations_list): New local var.
(register_known_notation): New.
(can_handle_critical_notation): Rewrite to handle the new feature.
Also print the name of unknown notations in verbose mode.
--
GnuPG-bug-id: 4060
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 3da835713fb6220112d988e1953f3d84beabbf6a)
* g10/getkey.c (getkey_ctx_s): New field found_via_akl.
(get_pubkey_byname): Set it.
(only_expired_enc_subkeys): New.
(get_best_pubkey_byname): Add support to refresh expired keys from the
WKD.
--
A little drawback of that code is that if the WKD has no update for an
expired key each access of the key will trigger a WKD lookup (unless
cached by the dirmngr). To avoid this we need to record the last time
we have checked for an update but that would in turn require that we
update the keyring for each check. We defer this until we have a
better key database which allows for fast updates of meta data.
Testing the code is currently a bit cumbersome because it requires to
update a key in the WKD several times. Eventually we we need a
network emulation layer to provide sample data for the regression
tests.
GnuPG-bug-id: 2917
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 7f172404bfcf719b9b1af4a182d4803525ebff7c)
* g10/parse-packet.c (parse_symkeyenc): Use iobuf_get_noeof.
(parse_key): Likewise.
--
Cherry picked from master commit:
1b309d9f6199a91caa0ca0b97b92d599e00b736e
When EOF comes at parsing s2k.count, it is possible the value will
be (unsigned long)-1. Then, the result of S2K_DECODE_COUNT will be
undefined. This patch fixes undefined behavior.
Reported-by: Philippe Antoine
GnuPG-bug-id: 4093
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-dirmngr.c (MAX_WKD_RESULT_LENGTH): New.
(gpg_dirmngr_wkd_get): Use it.
--
WKD should return only a single key with just one UID. For key
rollover 2 keys may be send. A total of 256 KiB seems to be a
generous limit here.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit e88f56f1937ac92f6a3b94e50b6db2649ec0be41)
