* scd/app.c (application_notify_card_reset): Add message for debug.
*scd/command.c (update_card_removed): Call release_application and set
SLOT -1 here.
(struct server_local_s): Remove app_ctx_marked_for_release.
(do_reset): Don't mark release but call release_application here.
(open_card): Remove app_ctx_marked_for_release handling.
(update_reader_status_file): Don't set SLOT here, so that it can be
released the APP by application_notify_card_reset in
update_card_removed.
--
Backport of master commit: 1598a4476466822e7e9c757ac471089d3db4b545
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_table): Remove LAST_APP field.
(lock_reader, app_dump_state, application_notify_card_reset)
(release_application): Follow the change.
(check_conflict): New.
(check_application_conflict): Lock the slot and call check_conflict.
(select_application): Call check_conflict and not use LAST_APP.
--
We don't need LAST_APP field but just keep the application context by
APP field. Since we have a reference counter, it is possible if we
can deallocate or not.
(backport of commit 9639af5f16a7ed908cbce2415330b9fcd88edc90)
* scd/apdu.c (apdu_close_reader): Call CLOSE_READER method even if we
got an error from apdu_disconnect.
* scd/app-common.h (no_reuse): Remove.
* scd/app.c (application_notify_card_reset): Deallocate APP here.
(select_application, release_application): Don't use NO_REUSE.
--
Reproducible scenario: Invoke gpg --card-edit session from a terminal.
Invoke another gpg --card-edit session from another. Remove a token.
Insert a token again. Type RET on both terminals. One of terminal
answers "Conflicting usage".
Perhaps, having NO_REUSE field was to avoid race conditions. Now,
APP can be safely deallocated by application_notify_card_reset.
Thanks to the2nd.
(backport of commit f42c50dbf00c2e6298ca6830cbe6d36805fa54a3)
* scd/app.c (select_application): Skip serial number reading.
--
(cherry picked from commit 792e137ec7997a0ff5c54ff970611238d28d4ba8)
Resolved conflicts:
scd/app.c: Take care of already changed geldkarte/dinsig
order.
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
Conflicts:
scd/app.c
progress_cb and progress_cb_arg.
(ccid_set_progress_cb): New.
(print_progress): New.
(ccid_transceive): Call print_progress for wait time extensions.
* apdu.c (struct reader_table_s): Add field set_progress_cb.
(new_reader_slot): Clear that field.
(open_ccid_reader): Set it to ..
(set_progress_cb_ccid_reader): ... new fucntion.
* app.c (print_progress_line): New.
(lock_reader): Add arg CTRL to set a progress callback and
change all callers to provide it.
(unlock_reader): Remove the progress callback.
* app.c (select_application): Cover up a slot mismatch error in
case it happens (it shouldn't happen).
(release_application): Use APP->slot. Lock the reader.
(application_notify_card_removed): Lock the reader.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* gpg-agent.c: New option --write-env-file.
* gpg-agent.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
* estream.c: Use HAVE_CONFIG_H and not USE_CONFIG_H!
(es_func_fd_read, es_func_fd_write): Protect against EINTR.
* gpg-agent.texi (Agent UPDATESTARTUPTTY): New.
* scdaemon.c (handle_connections): Make sure that the signals we
are handling are not blocked.Block signals while creating new
threads.
(handle_connections): Include the file descriptor into the name of
the thread.
(show_file): Implement it.
* keyformat.txt: Define the created-at attribute for keys.
* ccid-driver.c: Replaced macro DEBUG_T1 by a new debug level.
(parse_ccid_descriptor): Mark SCR335 firmware version 5.18 good.
(ccid_transceive): Arghhh. The seqno is another bit in the
R-block than in the I block, this was wrong at one place.
* scdaemon.c: New options --debug-ccid-driver and
--debug-disable-ticker.
* app-openpgp.c (do_genkey, do_writekey): Factored code to check
for existing key out into ..
(does_key_exist): .. New function.
* gpg-connect-agent.c (add_definq, show_definq, clear_definq)
(handle_inquire): New.
(read_and_print_response): Handle INQUIRE command.
(main): Implement control commands.
(do_sign): Call it.
* iso7816.c (iso7816_manage_security_env): Allow passing DATA as
NULL to indicate an empty Lc.
* tlv.c (find_tlv): Check that a found object fits into the
buffer.
(find_tlv_unchecked): New as replacement for the old non-checking
variant.
* app.c (select_application): Keep on using the non-checking
variant.
* app-openpgp.c (get_one_do, dump_all_do): Ditto.
* acinclude.m4: Ditto.
* scdaemon.texi: Removed OpenSC specific options.
* app-p15.c: New. Basic support for pkcs15 cards without OpenSC.
There are quite a couple of things missing but at least I can use
my old TCOS cards from the Aegypten-1 development for signing.
* app.c (select_application): Detect pkcs15 applications.
* Makefile.am (scdaemon_SOURCES): Removed card.c, card-common.h
and card-p15.c because they are now obsolete. Added app-p15.c.
Removed all OpenSC stuff.
* command.c (do_reset, open_card, cmd_serialno, cmd_learn)
(cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkdecrypt): Removed
all special cases for the old card.c based mechanisms.
* scdaemon.c, apdu.c: Removed all special cases for OpenSC.
%0A may pass through.
* agent.h (server_control_s): New field USE_AUTH_CALL.
* call-scd.c (agent_card_pksign): Make use of it.
* command-ssh.c (data_sign): Set the flag.
(ssh_send_key_public): New arg OVERRIDE_COMMENT.
(card_key_available): Add new arg CARDSN.
(ssh_handler_request_identities): Use the card s/n as comment.
(sexp_key_extract): Use GCRYMPI_FMT_STD.
(data_sign): Ditto.
* learncard.c (make_shadow_info): Moved to ..
* protect.c (make_shadow_info): .. here. Return NULL on malloc
failure. Made global.
* agent.h: Add prototype.
* xasprintf.c (xtryasprintf): New.
* app-openpgp.c (get_public_key): Make sure not to return negative
numbers.
(do_sign): Allow passing of indata with algorithm prefix.
(do_auth): Allow OPENPGP.3 as an alternative ID.
* app.c (app_getattr): Return just the S/N but not the timestamp.
* no-libgcrypt.c (gcry_strdup): New.
../g10/call-agent.c
(card_getattr_cb, agent_card_getattr): New.
* command-ssh.c (card_key_available): New.
(ssh_handler_request_identities): First see whether a card key is
available.
* app.c (app_getattr): Return APPTYPE or SERIALNO type even if the
application does dot support the getattr call.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
(scd_update_reader_status_file): Set the error flag on all changes.
select returns with -1.
* tools.texi (gpg-connect-agent): New.
* app-openpgp.c (get_one_do): Never try to get a non cacheable
object from the cache.
(get_one_do): Add new arg to return an error code. Changed all
callers.
(do_getattr): Let it return a proper error code.
* app.c (select_application): Return an error code and the
application context in an new arg.
* command.c (open_card): Adjusted for that. Don't use the
fallback if no card is present. Return an error if the card has
been removed without a reset.
(do_reset, cmd_serialno): Clear that error flag.
(TEST_CARD_REMOVAL): New. Use it with all command handlers.
* scdaemon.c (ticker_thread): Termintate if a shutdown is pending.
* apdu.c: Added some PCSC error codes.
(pcsc_error_to_sw): New.
(reset_pcsc_reader, pcsc_get_status, pcsc_send_apdu)
(open_pcsc_reader): Do proper error code mapping.
* gpg-connect-agent.c: New.
* Makefile.am: Add it.
stable version 0.1.x.
* scdaemon.texi (Card applications): New section.
* scdaemon.c (main): New option --disable-application.
* app.c (is_app_allowed): New.
(select_application): Use it to check for disabled applications.
* ccid-driver.h (CCID_DRIVER_ERR_ABORTED): New.
* ccid-driver.c (ccid_open_reader): Support the stable 0.1 version
of libusb.
(ccid_get_atr): Handle short messages.
* apdu.c (my_rapdu_get_status): Implemented.
* app.c (app_setattr): New.
(do_getattr): New.
(do_learn_status): Reimplemented in terms of do_getattr.
* app-openpgp.c (do_change_pin): Make sure CVH1 and CHV2 are
always synced.
(verify_chv2, verify_chv3): New. Factored out common code.
(do_setattr, do_sign, do_auth, do_decipher): Change the names of
the prompts to match that we have only 2 different PINs.
(app_select_openpgp): Check whether the card enforced CHV1.
(convert_sig_counter_value): New. Factor out code from
get_sig_counter.
