* common/http.c: Move to ../dirmngr/.
* common/http.h: Move to ../dirmngr/.
* common/t-http.c: Move to ../dirmngr/.
* common/tls-ca.pem: Move to ../dirmngr/.
* common/Makefile.am: Do not build libcommontls.a libcommontlsnpth.a.
Remove http.c related stuff.
* po/POTFILES.in: Move http.c to dirmngr/.
* dirmngr/Makefile.am (EXTRA_DIST): Add tls-ca.pem.
(module_maint_tests): New.
(noinst_PROGRAMS): Add module_maint_tests.
(dirmngr_SOURCES): Add http.c and http.h.
(dirmngr_LDADD): Remove libcommontlsnpth.
(t_common_ldadd): Ditto.
(t_http_SOURCES, t_http_CFLAGS, t_http_LDADD): New.
(t_ldap_parse_uri_SOURCES): Add http.c.
(t_ldap_parse_uri_CFLAGS): Build without npth.
($(PROGRAMS)): Do not require libcommontls.a libcommontlsnpth.a.
* dirmngr/dirmngr.h, dirmngr/ks-engine.h: Fix include of http.h.
--
All network access is done via dirmngr and thus http.c should be
there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mkdir_p.h (mkdir_p): Rename from this...
(gnupg_mkdir_p): ... to this. Change directory_component's type from
char * to const char *.
(amkdir_p): Rename from this...
(gnupg_amkdir_p): ... to this. Change directory_component's type from
char * to const char *.
* common/mkdir_p.c (mkdir_p): Rename from this...
(gnupg_mkdir_p): ... to this. Change directory_component's type from
char * to const char *.
(amkdir_p): Rename from this...
(gnupg_amkdir_p): ... to this. Change directory_component's type from
char * to const char *.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/http.c (send_request): Fix handling for hostname:port string.
--
The first pass to parse_uri should already do a scheme check so
that a hostname:port string is detected as invlaid and the retry
code actually takes effect and adds a http://
GnuPG-bug-id: 2109
* common/mkdir_p.c: Change license and comment debug statements.
(amkdir_p, mkdir_p): Fail on malloc error and use default_errsource to
build an error code. Change return value to gpg_error_t.
(amkdir_p): Use gnupg_mkdir.
* common/membuf.c: Include util.h first to avoid redefined macro
warnings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.h: Include <gpg-error.h>.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
logging.h uses estream_t and as such should directly include
<gpg-error.h>.
* common/ssh-utils.c (get_fingerprint): Handle the prefix of 0x40.
* common/t-ssh-utils.c (sample_keys): Add a new key.
--
Also adding Ed25519 test key.
* common/exechelp.h (GNUPG_SPAWN_NONBLOCK): New.
(GNUPG_SPAWN_RUN_ASFW, GNUPG_SPAWN_DETACHED): Macro to replace the
numbers.
* common/exechelp.h (gnupg_spawn_process): Change function to not take
an optional stream for stdin but to return one.
* common/exechelp-posix.c (gnupg_spawn_process): Implement change.
(create_pipe_and_estream): Add args outbound and nonblock.
* common/exechelp-w32.c (gnupg_spawn_process): Implement change.
--
In 2.1 this function is only used at one place and the stdin parameter
is not used. Thus this change is trivial for the callers but along
with estream's new es_poll it is overall simpler to use.
Note that the Windows version has not been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/ssh-utils.c (get_fingerprint): Fix hashed string.
--
That was an obvious c+p bug which should have been caught by a test
case.
GnuPG-bug-id: 2075
Debian-bug-id: 795636
* common/http.h (HTTP_FLAG_FORCE_TOR): New.
* common/http.c (http_raw_connect, send_request): Detect flag and
return an error for now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.h (enum iobuf_use): Add new member, IOBUF_INPUT_TEMP.
* common/iobuf.c (iobuf_temp_with_content): Create the iobuf as an
IOBUF_INPUT_TEMP, not an IOBUF_INPUT buffer. Assert that LENGTH ==
A->D.SIZE.
(iobuf_push_filter2): If A is an IOBUF_INPUT_TEMP, then make the new
filter an IOBUF_INPUT filter and set its buffer size to
IOBUF_BUFFER_SIZE.
(underflow): If A is an IOBUF_INPUT_TEMP, then just return EOF; don't
remove already read data.
(iobuf_seek): If A is an IOBUF_INPUT_TEMP, don't discard the buffered
data.
(iobuf_alloc): Allow USE == IOBUF_INPUT_TEMP.
(pop_filter): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_peek): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_writebyte): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_write): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_writestr): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_flush_temp): Fail if USE == IOBUF_INPUT_TEMP.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Introduce a new iobuf type, IOBUF_INPUT_TEMP. Use this for the iobuf
created by iobuf_temp_with_content instead of IOBUF_INPUT. This was
necessary so that seeking and peeking correctly work on this type of
iobuf. In particular, seeking didn't work because we discarded the
buffered data and peeking didn't work because we discarded data which
was already read, which made seeking later impossible.
* common/iobuf.h (enum iobuf_use): Name the IOBUF_OUTPUT, etc. enum.
(struct iobuf_struct): Change the field use's type to it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/t-iobuf.c (content_filter): If there is nothing to read,
don't forget to set *LEN to 0.
(main): Fix checks.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (iobuf_read): Make control flow more obvious.
(iobuf_get_filelength): Likewise.
(iobuf_get_fd): Likewise.
(iobuf_seek): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_alloc): Check that BUFSIZE is not 0.
(iobuf_readbyte): Check that A is an input filter. Check that the
amount of read data is at most the amount of buffered data.
(iobuf_read): Check that A is an input filter.
(iobuf_writebyte): Check that A is not an input filter.
(iobuf_writestr): Check that A is not an input filter.
(iobuf_flush_temp): Check that A is not an input filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the head filter is a temp
filter, use IOBUF_BUFFER_SIZE for the new filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the pipeline is an output or
temp pipeline, the new filter shouldn't assume ownership of the old
head's internal buffer: the data was written before the filter was
added.
* common/t-iobuf.c (double_filter): New function.
(main): Add test cases for the above bug.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_to_buffer): Flush each filter in the
pipeline and copy the data from the last (not the first) filter's
internal buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (do_open): New function, which is a generalization of
iobuf_open, iobuf_Create, iobuf_openrw.
(iobuf_open): Call do_open.
(iobuf_create): Likewise.
(iobuf_openrw): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_cancel): Don't abort freeing a pipeline if
freeing a filter fails. This needs to a memory leak. Instead, keep
freeing and return the error code of the first filter that fails.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Take additional parameter
clear_pending_eof. If not set, don't clear a pending eof when
returning EOF. Update callers.
(iobuf_peek): Fill the internal buffer, if needed, to be able to
better satisfy any request.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Don't require that the buffer be empty.
When called, fill any available space.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read_line): Be more careful with boundary
conditions.
* common/iobuf.h: Include <gpg-error.h>.
* common/t-iobuf.c: New file.
* common/Makefile.am (module_tests): Add t-iobuf.
(t_mbox_util_LDADD): New variable.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_with_content): Set the filter type to
IOBUF_INPUT, not IOBUF_TEMP, which is only for output filters that
write into a dynamic buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Remove field desc.
* common/iobuf.c (iobuf_desc): New function. When a filter's
description is needed, use this instead of the filter's desc field.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Clarify semantics of nofast.
Simplify use of nofast to implement just these semantics.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c: Move BLOCK_FILTER_INPUT,
BLOCK_FILTER_OUTPUT_BLOCK_FILTER_TEMP from here...
* common/iobuf.h: ... to here and rename to IOBUF_INPUT, IOBUF_OUTPUT
and IOBUF_TEMP, respectively. Where appropriate, use these macros
instead of a literal.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* common/iobuf.c (BLOCK_FILTER_INPUT): Define. Where appropriate, use
this instead of a literal.
(BLOCK_FILTER_OUTPUT): Likewise.
(BLOCK_FILTER_TEMP): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.