* scd/ccid-reader.c (scan_usb_device): Only for scan mode, so, rename
from scan_or_find_usb_device.
(scan_devices): Likewise. Remove support of special transport types.
(ccid_get_reader_list): Simplify.
(abort_cmd): Fix error return.
(send_escape_cmd): Fix for RESULTLEN == NULL.
(ccid_transceive_secure): Remove unnecessary var updates.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (CCID_CMD_TIMEOUT): Back to original value.
(CCID_CMD_TIMEOUT_LONGER): New.
(ccid_transceive): Add kludge for key generation.
--
At key generation of longer key size, OpenPGP card sends back "time
extension" with BWI=100, which is unusual value in the protocol and it
actually requires host having longer timeout like 43 seconds.
Reported-by: Szczepan Zalega <szczepan@nitrokey.com>
Fixes-commit: 6510df3a7c
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-dinsig.c (do_sign): Remove assignment to HASHALGO.
* scd/app-p15.c (parse_keyusage_flags): Remove assign to MASK.
(read_ef_aodf): Likewise.
(read_ef_cdf): Change the control to parse_error.
* scd/app-sc-hsm.c (parse_keyusage_flags): Remove assign to MASK.
(read_ef_prkd): Remove assign to S.
(read_ef_prkd): Check if PRKDF is not null.
(read_ef_cd): Likewise for CDF.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (notify_fd): Remove.
(the_event) [W32]: New.
(main_thread_pid) [!W32]: New.
(handle_signal): Handle SIGCONT.
(scd_kick_the_loop): Use signal on UNIX and event on Windows.
(handle_connections): Likewise.
--
Code with CreateEvent is copied from gpg-agent.c.
Code for signal is copied from dkg's gpg-agent-idling in Debian.
GnuPG-bug-id: 2982
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (get_prompt_info): Change texts.
* agent/call-pinentry.c (struct entry_features): New.
(getinfo_features_cb): New.
(start_pinentry): Set new fucntion as status callback.
(build_cmd_setdesc): New. Replace all snprintf for SETDESC by this
one.
--
Suggested-by: Andre Heinecke
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/app-openpgp.c (get_prompt_info): Change wording and order
slightly.
--
The word "Card" was repeated too much in the prompt and moving
signatures to the bottom results in a more consistent layout
between the prompts with signcount and the prompts without.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* scd/app-openpgp.c (get_disp_name): New.
(get_disp_serialno): New.
(get_prompt_info): New.
(build_enter_admin_pin_prompt): Rework the prompt texts. Factor some
code out to ...
(get_remaining_tries): New.
(verify_a_chv): Print a remaining counter also for the standard PIN.
Rework the prompt texts.
* agent/divert-scd.c (ask_for_card): Pretty format an OpenPGP serial
no.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (struct app_ctx_s): Add reset_requested.
* scd/app.c (app_reset): Locking APP, set reset_requested.
(deallocate_app): Release the lock.
(release_application): Add LOCKED_ALREADY argument.
(scd_update_reader_status_file): Hold the lock when accessing APP.
When reset_requested is set, close the reader and deallocate APP.
* scd/command.c (open_card_with_request, cmd_restart): Follow the
change of release_application.
(send_client_notifications): Here it calls release_application holding
the lock.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (release_application_internal): Remove.
(release_application): Merge release_application_internal.
(app_reset): Kick the loop and let close the reader. Sleep is
required here to wait closing.
(scd_update_reader_status_file): When APP is no use, close it.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_open_reader): Add an argument APP_EMPTY.
When CCID driver fails to open, try PC/SC if APP is nothing.
* scd/app.c (select_application): Supply arg if APP is nothing.
--
After scanning available card readers by CCID driver, scdaemon should
try PC/SC service if no APP is registered yet. Also, when the slot
is allocated for PC/SC (ccid.handle==NULL), it should not call
ccid_compare_BAI, otherwise scdaemon crashes.
Debian-bug-id: 852702, 854005, 854595, 854616
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (get_active_connection_count): New.
(start_connection_thread): Bump ACTIVE_CONNECTIONS up and down.
* scd/command.c (cmd_getinfo): Add subcommand "connections".
--
Apply gpg-agent change to scdaemon. See the commit in 2016-08-06:
40d16029ed
Then, add kicking the loop, so that main loop can notice the change of
the connection.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (ticker_disabled): Remove.
(handle_tick, need_tick): Remove.
(handle_connections): Don't check ticker_disabled.
--
Now, removal of device/card is only done by the function
scd_update_reader_status_file, it should be called if needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Fix the logic if periodical check is
needed. If it is needed for newly found device(s), kick the loop.
(scd_update_reader_status_file): Return value if select(2) should be
called with timeout.
* scd/ccid-driver.c (ccid_require_get_status): Don't return 0 for
token with no interrupt transfer for now.
* scd/command.c (open_card_with_request): Fix scan by SERIALNO.
* scd/scdaemon.c (update_usb): Remove.
(handle_connections): Evaluate need_tick after handle_tick.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (get_status_reader): Add ON_WIRE arg, here.
(ct_get_status, pcsc_get_status_direct, pcsc_get_status_wrapped)
(pcsc_get_status, get_status_ccid, my_rapdu_get_status): Likewise.
(reset_pcsc_reader_wrapped, open_pcsc_reader_wrapped): Follow the
change.
(apdu_get_status_internal): It's lower-level driver which judge
it's not needed. Otherwise, it can't detect the removal.
* scd/ccid-driver.c (ccid_slot_status): After the POWERED_OFF check,
we can skip sending GetSlotStatus packet on wire, when no need.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Fixes-commit: c8eee4d396a751d41fd1ee1e1b87b851fca172a
* scd/ccid-driver.c (do_close_reader): Don't lock events, but check the
return value of libusb_cancel_transfer.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-common.h (struct app_ctx_s): Rename field to
periodical_check_needed.
* scd/scdaemon.c (update_usb): Rename from update_fdset_for_usb.
Don't use libusb_get_pollfds any more.
(scd_kick_the_loop): New.
(need_tick): Follow the rename.
(handle_connections): No libusb event handling here.
* scd/app.c (app_new_register): Follow the change of rename.
(select_application, scd_update_reader_status_file): Likewise.
* scd/ccid-driver.c (ccid_usb_thread_is_alive): New.
(intr_cb): Call scd_kick_the_loop.
(ccid_usb_thread): New. Thread to invoke INTERRUPT callback.
(ccid_open_usb_reader): Add thread invocation.
(ccid_require_get_status): Remove
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP.
(do_close_reader): Carefully handle handle->transfer.
(get_escaped_usb_string): Insert npth_unprotect/npth_protect.
(do_close_reader, bulk_out, bulk_in, abort_cmd, ccid_slot_status)
(ccid_transceive, ccid_transceive_secure): Likewise.
--
It found that libusb_get_pollfds is not supported on Windows.
Besides, it's a bit difficult to use for the select loop.
Thus, we use the thread named ccid_usb_thread, instead.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c(struct reader_table_s): Add require_get_status.
(apdu_connect): Change return value meaning. Call apdu_reset here.
* scd/app.c (app_new_register): Add require_get_status.
(select_application): Use the return value of apdu_connect.
(scd_update_reader_status_file): Call update_fdset_for_usb with
checking all_have_intr_endp.
(app_list_start, app_list_finish): Remove.
* scd/ccid-driver.c (struct ccid_driver_s): Add transfer.
(intr_cb): Don't call libusb_transfer in this callback.
(ccid_require_get_status): New.
(do_close_reader): Call libusb_transfer here.
* scd/scdaemon.c (update_fdset_for_usb): Remove the first argument.
--
With Gnuk Token, it works fine as expected. With Gemalto reader,
intr_cb is not called when card is removed. So, the macro
LIBUSB_WORKS_EXPECTED_FOR_INTERRUPT_ENDP is not defined yet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (update_fdset_for_usb): Wake up the select(2).
(handle_connections): Use a kind of "self-pipe" technique.
--
Use pipe to wake up select(2). If UNIX-only, signal could be used. For
portability, "self-pipe" is better, here. Setup for non-blocking for
pipe fds are not needed, because speed of USB device insertion is
limited by human physical interaction; No one can do hundreds of
device insertion/removal-s per second.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_get_serial_and_stamp): Remove.
(app_get_serialno): New.
(app_write_learn_status): Use send_status_direct.
(app_getattr): Use app_get_serialno for SERIALNO and
send with send_status_direct.
* scd/app-openpgp.c (do_getattr): Likewise.
* scd/command.c (cmd_serialno): Don't send TIMESTAMP of 0.
(cmd_learn): Likewise. Don't inquire with TIMESTAMP of 0.
--
In the SERIALNO protocol, timestamp used to be considered, but had never
used at all. In the new implementation, removed card/token is always
detected and connection becomes invalid, no timestamp is required any
more. Examined scute and poldi as well for this protocol change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (select_application): Add SERIALNO_BIN and SERIALNO_BIN_LEN
arguments. Return matched APP with a serial number when specified.
* scd/command.c (open_card): Modify for the implicit open only.
(open_card_with_request): New for explicit open and support match with a
serial number.
(cmd_serialno): Support --demand option.
(cmd_learn, cmd_readcert, cmd_readkey, cmd_pksign, cmd_pkauth)
(cmd_pkdecrypt, cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_apdu): Follow
the change of open_card.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_dev_list_finish): Don't call ccid_dev_scan_finish
with no table.
(apdu_open_reader): Only increment when it's zero.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--
With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG. Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
