* g10/keydb.c (keydb_add_resource): Make ANY_REGISTERED
file-global. Write a STATUS_ERROR.
(maybe_create_keyring_or_box): Check for non-accessible but existant
file.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND.
* sm/keydb.c (keydb_add_resource): Rename ANY_PUBLIC to ANY_REGISTERED
and make file-global. Write a STATUS_ERROR.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND. Also add new arg CTRL and change
all callers to pass it down.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keydb.c (maybe_create_keybox): Create the header blob.
--
This is required so that g10/keydb.c can properly detect that a keybox
file is actually there. Just writing a 0 zero length keybox file is
not sufficient because a file with that name may also be an old-style
OpenPGP keyring.
GnuPG-bug-id: 2275
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-init.c (keybox_register_file): Change interface to return
the token even if the file has already been registered.
* g10/keydb.c (primary_keyring): Rename to primary_keydb.
(maybe_create_keyring_or_box): Change return type to gpg_error_t.
(keydb_add_resource): Ditto. s/rc/err/.
(keydb_add_resource): Mark an already registered as primary.
* sm/keydb.c (maybe_create_keybox): Change return type to gpg_error_t.
(keydb_add_resource): Ditto. s/rc/err/.
(keydb_add_resource): Adjust for changed keybox_register_file.
--
This change aligns the registering of keyboxes with those of
keyrings. This fixes a potential bug:
gpg --keyring foo.kbx --keyring bar.gpg --keyring foo.kbx
would have marked bar.gpg as primary resource and thus inserting new
keys there. The correct and now fixed behavior is to insert to
foo.kbx.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keydb.c (keydb_store_cert): Clear ephemeral flag for
existing certs if store should not be ephemeral.
--
Previously keydb_store_cert would ignore ephemeral certificates
when asked to store a non ephemeral certificate and insert
it again without the flags. This resulted in duplicated
certificates in the keybox.
GnuPG-bug-id: 1921
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* kbx/keybox.h (keybox_blobtype_t): New.
* kbx/keybox-defs.h (BLOBTYPE_*): Replace by KEYBOX_BLOBTYPE_*.
* kbx/keybox-search.c (keybox_search): Add arg want_blobtype and skip
non-matching blobs.
* sm/keydb.c (keydb_search): Pass KEYBOX_BLOBTYPE_X509 to keybox_search.
* g10/keydb.c (keydb_search): Pass KEYBOX_BLOBTYPE_PGP to keybox_search.
--
Without this fix a listing of all keys would fail because the wrong
blob type would be returned for the gpg or gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search.c (keybox_search): Add arg r_skipped and skip too
long blobs.
* sm/keydb.c (keydb_search): Call keybox_search with a dummy param.
* g10/keydb.c (struct keydb_handle): Add field skipped_long_blobs.
(keydb_search_reset): Reset that field.
(keydb_search): Update that field.
(keydb_get_skipped_counter): New.
* g10/keylist.c (list_all): Print count of skipped keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-defs.h (struct keybox_handle): Add field for_openpgp.
* kbx/keybox-file.c (_keybox_write_header_blob): Set openpgp header
flag.
* kbx/keybox-blob.c (_keybox_update_header_blob): Add arg for_openpgp
and set header flag.
* kbx/keybox-init.c (keybox_new): Rename to do_keybox_new, make static
and add arg for_openpgp.
(keybox_new_openpgp, keybox_new_x509): New. Use them instead of the
former keybox_new.
* kbx/keybox-update.c (blob_filecopy): Add arg for_openpgp and set the
openpgp header flags.
* g10/keydb.c (rt_from_file): New. Factored out and extended from
keydb_add_resource.
(keydb_add_resource): Switch to the kbx file if it has the openpgp
flag set.
* kbx/keybox-dump.c (dump_header_blob): Print header flags.
--
The problem was reported by dkg on gnupg-devel (2014-10-07):
I just discovered a new problem, though, which will affect people on
systems that have gpg and gpg2 coinstalled:
0) create a new keyring with gpg2, and use it exclusively with gpg2
for a while.
1) somehow (accidentally?) use gpg (1.4.x) again -- this creates
~/.gnupg/pubring.gpg
2) future runs of gpg2 now only look at pubring.gpg and ignore
pubring.kbx -- the keys you had accumulated in the keybox are no
longer listed in the output of gpg2 --list-keys
Note that gpgsm has always used pubring.kbx and thus this file might
already be there but without gpg ever inserted a key. The new flag in
the KBX header gives us an indication whether a KBX file has ever been
written by gpg >= 2.1. If that is the case we will use it instead of
the default pubring.gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (opt): Add field "no_homedir_creation".
* sm/gpgsm.c (main): Set it if --no-options is used.
* sm/keydb.c (try_make_homedir): New. Similar to the one from
g10/openfile.c.
(maybe_create_keybox): New. Similar to the one from g10/keydb.c.
(keydb_add_resource): Replace some code by maybe_create_keybox.
* kbx/keybox-search.c (keybox_search): Add arg R_DESCINDEX. Chnage
both callers.
* g10/keydb.c (keydb_search): Always set DESCINDEX.
--
This only affects the new keybox for OpenPGP keys in 2.1. The bug
exhibited itself by running GPA's backup command on Windows.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
Since 2009-12-08 gpg was not able to find email addresses indicated
by a leading '<'. This happened when I merged the user id
classification code of gpgsm and gpg.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
* keybox.h (KEYBOX_FLAG_BLOB_SECRET, KEYBOX_FLAG_BLOB_EPHEMERAL):
New.
* keybox-update.c (keybox_compress): Use it here instead of a
magic constant.
sm/
* fingerprint.c (gpgsm_get_fingerprint): Add caching.
(gpgsm_get_fingerprint_string): Use bin2hexcolon().
(gpgsm_get_fingerprint_hexstring): Use bin2hex and allocate only
as much memory as required.
(gpgsm_get_keygrip_hexstring): Use bin2hex.
* certchain.c (gpgsm_validate_chain): Keep track of the
certificate chain and reset the ephemeral flags.
* keydb.c (keydb_set_cert_flags): New args EPHEMERAL and MASK.
Changed caller to use a mask of ~0. Return a proper error code if
the certificate is not available.
* keydb.c (keydb_insert_cert): Do not lock here, but only check if
it is locked.
(keydb_store_cert): Lock here.
* keydb.h (keydb_delete): Accept new argument UNLOCK.
* keydb.c (keydb_delete): Likewise. Only unlock if this is set.
* delete.c (delete_one): Add new argument to invocation of
keydb_delete.
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* certreqgen.c (get_parameter_uint, create_request): Create
an extension for key usage when requested.
* gpgsm.c (main): Install emergency_cleanup also as an atexit
handler.
* verify.c (gpgsm_verify): Removed the separate error code
handling for KSBA. We use shared error codes anyway.
* export.c (export_p12): Removed debugging code.
* encrypt.c (gpgsm_encrypt): Put the session key in to secure memory.
(main): New option --gpgconf-list.
(main): Do not setup -u and -r keys when not required.
(main): Setup the used character set.
* keydb.c (keydb_add_resource): Print a hint to start the
gpg-agent.
* keybox-search.c (get_flag_from_image, keybox_get_flags): New.
(_keybox_get_flag_location): New.
* certchain.c (gpgsm_validate_chain): Mark revoked certs in the
keybox.
* keylist.c (list_cert_colon): New arg VALIDITY; use it to print a
revoked flag.
(list_internal_keys): Retrieve validity flag.
(list_external_cb): Pass 0 as validity flag.
* keydb.c (keydb_get_flags, keydb_set_flags): New.
(keydb_set_cert_flags): New.
(lock_all): Return a proper error code.
(keydb_lock): New.
(keydb_delete): Don't lock but check that it has been locked.
(keydb_update_keyblock): Ditto.
* delete.c (delete_one): Take a lock.
all callers.
* call-agent.c (learn_cb): Print info message only for real imports.
* import.c (gpgsm_import): Moved duplicated code to ...
(check_and_store): new function. Added magic to import the entire
chain. Print status only for real imports and moved printing code
to ..
(print_imported_status): New.