* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 380bce13d9)
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 52d41c8b0f)
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f7212f1d11)
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_pksign): Change var name 'rc' to 'err'.
* agent/findkey.c (read_key_file): Ditto. Change return type to
gpg_error_t. On es_fessk failure return a correct error code.
(agent_key_from_file): Change var name 'rc' to 'err'.
* agent/pksign.c (agent_pksign_do): Ditto. Change return type to
gpg_error_t. Return a valid erro code on malloc failure.
(agent_pksign): Ditto. Change return type to gpg_error_t. replace
xmalloc by xtrymalloc.
* agent/protect.c (calculate_mic): Change return type to gpg_error_t.
(do_decryption): Ditto. Do not init RC.
(merge_lists): Change return type to gpg_error_t.
(agent_unprotect): Ditto.
(agent_get_shadow_info): Ditto.
--
While code starring for bug 3266 I found two glitches and also changed
var name for easier reading.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (PROT_DEFAULT_TO_OCB): Remove macro.
(agent_protect): Make the default protection mode depend on the extend
key format option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/Makefile.am (AM_CPPFLAGS): Remove -I$(top_srcdir)/common.
* agent/call-pinentry.c, agent/call-scd.c: Follow the change.
* agent/command-ssh.c, agent/command.c, agent/cvt-openpgp.c: Ditto.
* agent/divert-scd.c, agent/findkey.c, agent/genkey.c: Ditto.
* agent/gpg-agent.c, agent/pksign.c, agent/preset-passphrase.c: Ditto.
* agent/protect-tool.c, agent/protect.c, agent/trustlist.c: Ditto.
* agent/w32main.c: Ditto.
--
For openpty function, we need to include util.h on some OS.
We also have util.h in common/, so this change is needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/protect.c (OCB_MODE_SUPPORTED): Remove macro.
(do_encryption): Always support OCB.
(do_decryption): Ditto.
(agent_unprotect): Ditto.
* dirmngr/server.c (is_tor_running): Unconditionally build this.
--
Although not technically required, it is easier to require them to
avoid bug reports due to too old library versions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (do_encryption): Fix CBC hashing.
--
The buggy code included an extra closing parenthesis before
the (protected-at) term in the CBC hashing. We now do it by
explicitly hashing the protected stuff and append the rest of the
expression instead of a fixed closing parenthesis. Note that the OCB
hashing only differs that it does no include the protected part.
Fixes-commit: 4159567f7e
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (agent_protect): Add arg use_ocb. Change all caller
to pass -1 for default.
* agent/protect-tool.c: New option --debug-use-ocb.
(oDebugUseOCB): New.
(opt_debug_use_ocb): New.
(main): Set option.
(read_and_protect): Implement option.
* agent/protect.c (OCB_MODE_SUPPORTED): New macro.
(PROT_DEFAULT_TO_OCB): New macro.
(do_encryption): Add args use_ocb, hashbegin, hashlen, timestamp_exp,
and timestamp_exp_len. Implement OCB.
(agent_protect): Change to support OCB.
(do_decryption): Add new args is_ocb, aadhole_begin, and aadhole_len.
Implement OCB.
(merge_lists): Allow NULL for sha1hash.
(agent_unprotect): Change to support OCB.
(agent_private_key_type): Remove debug output.
--
Instead of using the old OpenPGP way of appending a hash of the
plaintext and encrypt that along with the plaintext, the new scheme
uses a proper authenticated encryption mode. See keyformat.txt for a
description. Libgcrypt 1.7 is required.
This mode is not yet enabled because there would be no way to return
to an older GnuPG version. To test the new scheme use
gpg-protect-tool:
./gpg-protect-tool -av -P abc -p --debug-use-ocb <plain.key >prot.key
./gpg-protect-tool -av -P abc -u <prot.key
Any key from the private key storage should work.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/protect.c (PROT_CIPHER): Rename to GCRY_CIPHER_AES128 for
clarity.
(do_decryption): Add args prot_cipher and prot_cipher_keylen. USe
them instead of the hardwired values.
(agent_unprotect): Change to use a table of protection algorithms.
Add AES-256 variant.
--
This patch will make a possible future key protection algorithm
changes smoother. AES-256 is also allowed although there is currently
no way to encrypt using it.
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_import_key): Add option --unattended.
* agent/cvt-openpgp.c (convert_transfer_key): New.
(do_unprotect): Factor some code out to ...
(prepare_unprotect): new function.
(convert_from_openpgp): Factor all code out to ...
(convert_from_openpgp_main): this. Add arg 'passphrase'. Implement
openpgp-native protection modes.
(convert_from_openpgp_native): New.
* agent/t-protect.c (convert_from_openpgp_native): New dummy fucntion
* agent/protect-tool.c (convert_from_openpgp_native): Ditto.
* agent/protect.c (agent_unprotect): Add arg CTRL. Adjust all
callers. Support openpgp-native protection.
* g10/call-agent.c (agent_import_key): Add arg 'unattended'.
* g10/import.c (transfer_secret_keys): Use unattended in batch mode.
--
With the gpg-agent taking care of the secret keys, the user needs to
migrate existing keys from secring.gpg to the agent. This and also
the standard import of secret keys required the user to unprotect the
secret keys first, so that gpg-agent was able to re-protected them
using its own scheme. With many secret keys this is quite some
usability hurdle. In particular if a passphrase is not instantly
available.
To make this migration smoother, this patch implements an unattended
key import/migration which delays the conversion to the gpg-agent
format until the key is actually used. For example:
gpg2 --batch --import mysecretkey.gpg
works without any user interaction due to the use of --batch. Now if
a key is used (e.g. "gpg2 -su USERID_FROM_MYSECRETKEY foo"), gpg-agent
has to ask for the passphrase anyway, converts the key from the
openpgp format to the internal format, signs, re-encrypts the key and
tries to store it in the gpg-agent format to the disk. The next time,
the internal format of the key is used.
This patch has only been tested with the old demo keys, more tests
with other protection formats and no protection are needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (SPEC_FLAG_IS_ECDSA): New.
(struct ssh_key_type_spec): Add fields CURVE_NAME and HASH_ALGO.
(ssh_key_types): Add types ecdsa-sha2-nistp{256,384,521}.
(ssh_signature_encoder_t): Add arg spec and adjust all callers.
(ssh_signature_encoder_ecdsa): New.
(sexp_key_construct, sexp_key_extract, ssh_receive_key)
(ssh_convert_key_to_blob): Support ecdsa.
(ssh_identifier_from_curve_name): New.
(ssh_send_key_public): Retrieve and pass the curve_name.
(key_secret_to_public): Ditto.
(data_sign): Add arg SPEC and change callers to pass it.
(ssh_handler_sign_request): Get the hash algo from SPEC.
* common/ssh-utils.c (get_fingerprint): Support ecdsa.
* agent/protect.c (protect_info): Add flag ECC_HACK.
(agent_protect): Allow the use of the "curve" parameter.
* agent/t-protect.c (test_agent_protect): Add a test case for ecdsa.
* agent/command-ssh.c (ssh_key_grip): Print a better error code.
--
The 3 standard curves are now supported in gpg-agent's ssh-agent
protocol implementation. I tested this with all 3 curves and keys
generated by OpenSSH 5.9p1.
Using existing non-ssh generated keys will likely fail for now. To fix
this, the code should first undergo some more cleanup; then the fixes
are pretty straightforward. And yes, the data structures are way too
complicated.
This is not yet fully implemented. It will eventually allow to
support pinpad equipped readers which do not support variable length
pin lengths.
* agent/protect.c (parse_shadow_info): Add optional arg R_PINLEN and
parse pinlen info. Change all callers to pass NULL for it.
The protection used in the exported key used a different iteration
count than given in the S2K field. Thus all OpenPGP keys exported
from GnuPG 2.1-beta can't be imported again. Given that the actual
secret key material is kept in private-keys-v1.d/ the can be
re-exported with this fixed version.
Wrote the ChangeLog 2011-01-13 entry for Andrey's orginal work modulo
the cleanups I did in the last week. Adjusted my own ChangeLog
entries to be consistent with that entry.
Nuked quite some trailing spaces; again sorry for that, I will better
take care of not saving them in the future. "git diff -b" is useful
to read the actual changes ;-).
The ECC-INTEGRATION-2-1 branch can be closed now.
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
Daniel Kahn Gillmor