* scd/apdu.c (open_ccid_reader): Add arg r_cciderr.
(apdu_open_reader): Print a note on EPERM of the USB device.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--
This change will help to get low level error conditions from hipher
application code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_sethash): Add option --pss and allow for
--hash=null.
* agent/agent.h (struct server_control_s): Add digest.is_pss and
zero where needed.
* agent/pksign.c (agent_pksign_do): Allow for PSS with cards.
* scd/command.c (cmd_pksign): Add for --hash=none.
--
This is not a full implementaion of PSS but allows scdaemon card
drivers to detect already PSS formatted data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Unlock the reader_table_lock.
(apdu_dev_list_finish): Release the context when no readers.
--
Fixes-commit: 46d185f60397f68830bfdfb99627b29aea5016f1
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (CMD_UPDATE_BINARY): New.
(iso7816_update_binary): New.
* scd/app-nks.c (do_deinit): Factor some code out to...
(flush_fid_cache): new.
(do_writecert): New.
(app_select_nks): Register new handler.
--
This can be used with gpg-card to write the 3 extra certificates of a
Telesec TCOS Signature Card v2. The card with the qualified signature
is distributed with the keys for encryption and advanced signatures
but without the certificates. The certificates can be downloaded from
the website after an mail confirmation. Unpacked the downloaded
zipfile has these certificates:
auth_zert.crt
sig_zert.crt
enc_zert.crt
Using gpg-card issue these commands:
writecert NKS-NKS3.4531 <sig_zert.crt
writecert NKS-NKS3.45B1 <enc_zert.crt
writecert NKS-NKS3.4571 <auth_zert.crt
Don't mix that up, tight now there is no checking that the
certificates match the public key. I also need to write another patch
to actually implement signing and encryption with these nistp256
certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_serialno): Set/clear card removed flags for all
connections using the current card.
--
This seems to solve the problems I had in gpg-card and ssh. I am not
sure why the old code was done this way - maybe an oversight when
adding support for multiple cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Fixes-commit: 074ab108e768b2f946d789c1f3a7f14a65e07c52
which was recently pushed to make use of $SOURCE_DATE_EPOCH
as fallback.
Also fixes two typos
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_all_additional_applications_internal): Re-select
first app. Add arg 'ctrl'.
--
Usually keygrip based access to the Yubikey does a switching back and
forth and thus keeps the card and scdaemon's internal state in sync.
However, if we do only a listing scdaemon did not reselect the first
application (e.g. OpenPGP) after adding other applications (e.g. PIV)
and thus led to wrong info returned in a listing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (get_dispserialno): Move more to the top.
(do_getattr): Add $DISPSERIALNO and SERIALNO. Make CHV-STATUS work
with NKS15.
(verify_pin): Use dedicated min. PIN lengths.
(parse_pwidstr): Support NKS15
--
GnuPG-bug-id: 4938
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (struct fid_cache_s): New.
(struct app_local_s): Add field 'fid_cache'.
(do_deinit): Release the cache.
(keygripstr_from_pk_file): Implement the cache.
(find_fid_by_keyref): New
(do_sign, do_decipher): Use new function.
(do_with_keygrip): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c: Major rework to support non-RSA cards.
--
This is a fist step so support this ECC card. The code has been
reworked while taking care that old cards should keep on working.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (send_card_and_app_list): Detect no app case.
--
This is a minor nug fix to return a better error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (make_pin_prompt): Factor some code out to ...
(get_dispserialno): this.
(do_getattr): Use new fucntion for a $DISPSERIALNO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): New fields common_name and
serial_number.
(release_prkdflist): Free them.
(keygrip_from_prkdf): Parse cert and set them.
(any_control_or_space): New.
(make_pin_prompt): New.
(verify_pin): Construct a pretty PIN prompt.
(do_sign): Remove debug output.
--
The D-Trust card has the SerialNumber part of the Subject printed on
the front matter, we assume this is also possible with other cards and
thus we show this as serial number.
The holder of the card is also extracted from the card's subject.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (map_sw): Detect 0x63Cn status code.
--
I really wonder when that got lost and we ended up with a simple card
error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_select_mf): New.
* scd/app-p15.c (card_product_t): New.
(struct app_local_s): Add field 'card_product'.
(read_ef_tokeninfo): Detect D-Trust card.
(prepare_verify_pin): Switch to D-Trust AID.
(do_decipher): Restore a SE for D-TRust cards. Chnage the passing
indicator to 0x81.
--
Using what I learned from a USB trace running the Governikus Signer
Software on Windows this fixes the left over problem with the new
D-Trust card support.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (prepare_verify_pin): Allow use without an AODF.
(verify_pin): Ditto.
(do_with_keygrip): Implement capability restrictions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_keyinfo): Use Gcrypt constants for CAP.
* scd/app-openpgp.c (do_with_keygrip): Adjust for them.
* scd/app-piv.c (do_with_keygrip): Ditto.
--
That makes it easier to read. An open question is whether we should
allow several capabilities and whether they are the ORed or ANDed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): Add flag pin_verified.
(verify_pin): Make use of it.
--
Theee is still a problem with the APDUs we send: Switching between
signing and decryption does work but not in the other way.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_sign): Move keygrip_from_prkdf before PIN
verification.
(do_decipher): Add keygrip_from_prkdf.
--
This is required because that function may change the current file
which is set by prepare_verify_pin right before MSE. HAs alredy been
done on the backport to 2.2
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_decipher): New.
--
tested using the D-TRUSt card and a SCR3310 reader. The Kobil KAAN
Advanced, I used for the signing tests could not be used because it
supports only Short APDU Level exchange.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-help.c (app_help_get_keygrip_string_pk): Add optional arg
r_pkey and change all callers.
(app_help_get_keygrip_string): Ditto.
* scd/app-p15.c (struct cdf_object_s): Use bit flags
(struct aodf_object_s): Ditto. Add field 'fid'.
(struct prkdf_object_s): Ditto. Add fields keygrip, keyalgo, and
keynbits.
(parse_certid): Allow a keygrip instead of a certid aka keyref.
(read_ef_aodf): Store the FID.
(keygripstr_from_prkdf): Rename to ...
(keygrip_from_prkdf): this. Remove arg r_gripstr and implement cache.
Change callers to directly use the values from the object. Also store
the algo and length of the key ion the object.
(keyref_from_keyinfo): New. Factored out code.
(do_sign): Support SHA-256 and >2048 bit RSA keys.
(do_with_keygrip): New.
(app_select_p15): Register new function.
--
This has been tested with a D-Trust card featuring 3072 bit keys.
Note that non-repudiation key for a qualified signature does not yet
work because we do not yet support rsaPSS padding. Thus a gpgsm
--learn shows a couple of Bad Signature errors for this key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary): Factor code out to ...
(iso7816_read_binary_ext): new function. Add arg extended_mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This removes almost all log_debug calls and uses opt.verbose and
log_info to show card information. Also avoid too long and thus
harder to read lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_ef_odf): Detect the home_DF on the fly. Silence
the garbage warning for null bytes.
(print_tokeninfo_tokenflags): New.
(read_ef_tokeninfo): Print manufacturer, label, and flags.
(app_select_p15): No need to use the app_get_slot macro.
(CARD_TYPE_CARDOS_50): New const.
(card_atr_list): Detect CardOS 5.0
--
The card under test is a "Test-Signaturkarte D-TRUST Card 3.1" for a
mere 49 Euro and no specs available. D-Trust is a branch of the
German Bundesdruckerei. Compare that to Telesec and Yubikey who have
always been nice enough to send bunches of sample cards without a need
to wade through lots of forms and not even asking for money. Guess
which cards I prefer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (check_keyidstr): Add optional arg r_use_auth to
test also for OpenPGP.3.
(do_sign): Enable that new mode.
--
This is very useful to allow gpgsm to use a certificate based on the
OpenPGP card's authentication key. That key is usually used for ssh
but it makes sense to use it also for user certificate based
authentication.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
