* tools/gpgconf-comp.c (gc_component_launch): Fix crash due to too
small array.
--
GnuPG-bug-id: 5366
Depending on the stack layout this could have led to zeroing out the
PID variable if --homedir was used and thus under Windows to a leaked
handle. However, gpgconf is a short running process and thus no
really harm.
Co-authored-by: cbiedl@gnupg.com
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit 4dcef0e178)
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
(cherry picked from commit c94ee1386e)
* tools/gpgconf-comp.c (gc_component_check_options): Take care of
--homedir.
(retrieve_options_from_program): Ditto.
--
Note that due to the large changes in master we could not backport the
patch from there.
GnuPG-bug-id: 4882
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported from master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_kill): Reverse the order.
--
Cherry-picked from master commit:
7c877f942a
The order matters in a corner case; On a busy machine, there was a
race condition between gpg-agent's running KILLAGENT command and its
accepting incoming request on the socket. If a request by
gpg-connect-agent was accepted, it resulted an error by sudden
shutdown. This change of the order can remove such a race.
Here, we know backend=0 is none.
GnuPG-bug-id: 4577
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf-comp.c (gc_component_t): Move this enum to ...
* tools/gpgconf.h: here.
* tools/gpgconf.c (oShowSocket): New.
(opts): Add new option.
(main): Implement new option.
--
This is a convenience options for software which directly connects to
gpg-agent and thus needs to new the socket. By using --show-socket
along with --launch that software can also autostart the agent or the
dirmngr. Without this two calls to gpgconf would be required.
Actually the same behaviour can be achieved by running
gpg-connect-agent to query the running gpg-agent's socket via GETINFO.
The gpg-connect also makes sure that the agent is started. This is
not anymore suggested because gpgconf shall in future be used for all
such things.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit ac485b4f25)
* tools/gpgconf-comp.c (get_config_filename): Allow UNC paths.
--
The homedir of GnuPG on Windows can be on a network share
e.g. if %APPDATA% is redirected to a network share. The
file API calls work and GnuPG itself works nicely
with such paths so gpgconf should work with them, too.
GnuPG-Bug-Id: T3818
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* tools/gpgconf.c (oStatusFD): New const.
(opts): New option --status-fd.
(statusfp): New var.
(set_status_fd): New.
(gpgconf_write_status): New.
(gpgconf_failure): New.
(main): Set status fd and replace exit by gpgconf_failure.
* tools/gpgconf-comp.c: Repalce exit by gpgconf_failure.
(gc_process_gpgconf_conf): Print a few warning status messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (main): Allow setting of the default compliance.
* tools/gpgconf-comp.c (gc_options_gpgsm): Add "compliance".
--
This is required so that we can use this option in in gpgconf.conf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_program): Add arg
only_installed.
(gc_component_retrieve_options): Use this if we want to process all
components.
--
Note that this also also ignores them in --with-defaults. This is
useful for systems which come without scdaemon.
GnuPG-bug-id: 3313
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Announce "auto-key-retrieve".
(main): Simplify setting of KEYSERVER_AUTO_KEY_RETRIEVE.
* tools/gpgconf-comp.c: Make "no-auto-key-retrieve" invisible. Make
"auto-key-retrieve" an expert option.
--
This basically reverts 9bb13a0e81
because --no-auto-key-retrieve is again the default. Note that we
allow both options for the sake of profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_options_gpg): Add max-cert-depth,
completes-needed, and marginals-needed options.
* g10/gpg.c (gpgconf_list): Likewise.
--
Some tests to come for the PGP trust model will need to manipulate
these parameters.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* doc/gpg.texi: Document new option.
* g10/call-dirmngr.c (create_context): Fail if option is given.
* g10/gpg.c (cmd_and_opt_values): New value.
(opts): New option.
(gpgconf_list): Add new option.
(main): Handle new option.
* g10/options.h (struct opt): New field 'disable_dirmngr'.
* tools/gpgconf-comp.c (gc_options_gpg): New option.
GnuPG-bug-id: 3334
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gc_options_gpg): Re-add "auto-key_retrieve".
--
Although this option is invisible, it might be in use by gpgconf
profiles. We don't want to break them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Print no-auto-key-retrieve instead of
auto-key-retrieve.
* tools/gpgconf-comp.c (gc_options_gpg): Replace auto-key-retrieve by
no-auto-key-retrieve and chnage level from invisible to advanced.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (main): Move oSSHFingerprintDigest to ...
(parse_rereadable_options): here.
(opts): Change its description.
(main) <aGPGConfList>: Include this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add option at expert
level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_program): Check ERRNO
before printing a warning.
--
It is common that a conf files does not exist - thus we should not
print a warning.
GnuPG-bug-id: 2944
BTW: The error messages in gpgconf should be reworked to match those
of the other components.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (retrieve_options_from_file): Use a
gpgrt_stream_t for 'list_file'. Adapt accordingly.
(copy_file): Likewise for 'src' and 'dst'.
(change_options_file): Likewise for 'src_file' and 'dest_file'.
(change_options_program): Likewise for 'src_file' and 'dest_file'.
(gc_process_gpgconf_conf): Likewise for 'config'.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gc_component_change_options): Use
'gnupg_rename_file'. Also, block signals across all renames in an
attempt to make the whole process atomic.
--
Werner asked me to make gpgconf use the platform abstractions that
were introduced after gpgconf's inception.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (change_options_file): Add comments explaining
the functions parameters.
(change_options_program): Likewise.
--
From reading those two functions it is not clear why we write the new
configuration to the source file, and read the current configuration
from the destination file. The identifiers are named for the benefit
of the callee.
Note that identifiers that require that much explanation are poorly
chosen.
Signed-off-by: Justus Winter <justus@g10code.com>
* tools/gpgconf-comp.c (gp_component_change_options): Improve error
handling when reading from stdin.
--
Previously, errors encountered while reading the configuration changes
were ignored.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (DEFAULT_TIMEOUT): New.
(opt_timeout): New var.
(set_dns_timeout): New.
(libdns_res_open): Set the default timeout.
(libdns_res_wait): Use configurable timeout.
(resolve_name_libdns): Ditto.
* dirmngr/dirmngr.c (oResolverTimeout): New const.
(opts): New option --resolver-timeout.
(parse_rereadable_options): Set that option.
(main) <aGPGConfList>: Add --nameserver and --resolver-timeout.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add --resolver-timeout
and --nameserver.
* dirmngr/http.c (connect_server): Fix yesterday introduced bug in
error diagnostic.
--
This timeout is a pretty crude thing because libdns has a few other
internal timeouts as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aApplyProfile): New.
(opts): New command --apply-profile.
(main): Implement that command.
* tools/gpgconf-comp.c (option_check_validity): Add arg VERBATIM.
(change_options_program): Ditto.
(change_one_value): Ditto.
(gc_component_change_options): Ditto.
(gc_apply_profile): New.
--
Here is an example for a profile
--8<---------------cut here---------------start------------->8---
# foo.prf - Sample profile
[gpg]
compliance de-vs
default-new-key-algo brainpoolP256r1+brainpoolP256r1
[gpgsm]
enable-crl-checks
[gpg-agent]
default-cache-ttl 900
max-cache-ttl [] 3600
no-allow-mark-trusted
no-allow-external-cache
enforce-passphrase-constraints
min-passphrase-len 9
min-passphrase-nonalpha 0
[dirmngr]
keyserver hkp://keys.gnupg.net
allow-ocsp
--8<---------------cut here---------------end--------------->8---
Note that flags inside of brackets are allowed after the option name.
The only defined flag for now is "[default]". In case the value
starts with a bracket, it is possible to insert "[]" as a nop-flag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (struct opt): Add field allow_version_check.
* dirmngr/dirmngr.c (oAllowVersionCheck): New.
(opts): Add --allow-version-check.
(network_activity_seen): New variable.
(parse_rereadable_options): Set opt.allow_version_check.
(main) <aGPGConfList>: Do not anymore set the no change flag for
Windows. Add allow-version-check.
(netactivity_action): Set network_activity_seen.
(housekeeping_thread): Call dirmngr_load_swdb.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add allow-version-check.
Make "use-tor" available at Basic level.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gpg_agent_runtime_change,
scdaemon_runtime_change, dirmngr_runtime_change): Provide the homedir
arguments by --homedir when it's not default.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/exechelp-posix.c (do_exec): Add arg 'except' and pass to
close_all_fds.
(gnupg_spawn_process): Add arg 'except'. Change callers to pass NULL
for it.
* common/exechelp-w32.c (gnupg_spawn_process): Add dummy arg 'except'.
* common/exechelp-w32ce.c (gnupg_spawn_process): Ditto.
* common/exectool.c (copy_buffer_do_copy): Allow NULL for SINK.
(gnupg_exec_tool_stream): Add arg 'inextra'. Change callers to pass
NULL for it. Allow NULL for OUTPUT.
--
This hack is a first step to allow calling gpg for verification of
signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
