* common/ssh-utils.c (get_fingerprint): Fix hashed string.
--
That was an obvious c+p bug which should have been caught by a test
case.
GnuPG-bug-id: 2075
Debian-bug-id: 795636
* common/http.h (HTTP_FLAG_FORCE_TOR): New.
* common/http.c (http_raw_connect, send_request): Detect flag and
return an error for now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.h (enum iobuf_use): Add new member, IOBUF_INPUT_TEMP.
* common/iobuf.c (iobuf_temp_with_content): Create the iobuf as an
IOBUF_INPUT_TEMP, not an IOBUF_INPUT buffer. Assert that LENGTH ==
A->D.SIZE.
(iobuf_push_filter2): If A is an IOBUF_INPUT_TEMP, then make the new
filter an IOBUF_INPUT filter and set its buffer size to
IOBUF_BUFFER_SIZE.
(underflow): If A is an IOBUF_INPUT_TEMP, then just return EOF; don't
remove already read data.
(iobuf_seek): If A is an IOBUF_INPUT_TEMP, don't discard the buffered
data.
(iobuf_alloc): Allow USE == IOBUF_INPUT_TEMP.
(pop_filter): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_peek): Allow USE == IOBUF_INPUT_TEMP.
(iobuf_writebyte): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_write): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_writestr): Fail if USE == IOBUF_INPUT_TEMP.
(iobuf_flush_temp): Fail if USE == IOBUF_INPUT_TEMP.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Introduce a new iobuf type, IOBUF_INPUT_TEMP. Use this for the iobuf
created by iobuf_temp_with_content instead of IOBUF_INPUT. This was
necessary so that seeking and peeking correctly work on this type of
iobuf. In particular, seeking didn't work because we discarded the
buffered data and peeking didn't work because we discarded data which
was already read, which made seeking later impossible.
* common/iobuf.h (enum iobuf_use): Name the IOBUF_OUTPUT, etc. enum.
(struct iobuf_struct): Change the field use's type to it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/t-iobuf.c (content_filter): If there is nothing to read,
don't forget to set *LEN to 0.
(main): Fix checks.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (iobuf_read): Make control flow more obvious.
(iobuf_get_filelength): Likewise.
(iobuf_get_fd): Likewise.
(iobuf_seek): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_alloc): Check that BUFSIZE is not 0.
(iobuf_readbyte): Check that A is an input filter. Check that the
amount of read data is at most the amount of buffered data.
(iobuf_read): Check that A is an input filter.
(iobuf_writebyte): Check that A is not an input filter.
(iobuf_writestr): Check that A is not an input filter.
(iobuf_flush_temp): Check that A is not an input filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the head filter is a temp
filter, use IOBUF_BUFFER_SIZE for the new filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the pipeline is an output or
temp pipeline, the new filter shouldn't assume ownership of the old
head's internal buffer: the data was written before the filter was
added.
* common/t-iobuf.c (double_filter): New function.
(main): Add test cases for the above bug.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_to_buffer): Flush each filter in the
pipeline and copy the data from the last (not the first) filter's
internal buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (do_open): New function, which is a generalization of
iobuf_open, iobuf_Create, iobuf_openrw.
(iobuf_open): Call do_open.
(iobuf_create): Likewise.
(iobuf_openrw): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_cancel): Don't abort freeing a pipeline if
freeing a filter fails. This needs to a memory leak. Instead, keep
freeing and return the error code of the first filter that fails.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Take additional parameter
clear_pending_eof. If not set, don't clear a pending eof when
returning EOF. Update callers.
(iobuf_peek): Fill the internal buffer, if needed, to be able to
better satisfy any request.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Don't require that the buffer be empty.
When called, fill any available space.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read_line): Be more careful with boundary
conditions.
* common/iobuf.h: Include <gpg-error.h>.
* common/t-iobuf.c: New file.
* common/Makefile.am (module_tests): Add t-iobuf.
(t_mbox_util_LDADD): New variable.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_with_content): Set the filter type to
IOBUF_INPUT, not IOBUF_TEMP, which is only for output filters that
write into a dynamic buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Remove field desc.
* common/iobuf.c (iobuf_desc): New function. When a filter's
description is needed, use this instead of the filter's desc field.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Clarify semantics of nofast.
Simplify use of nofast to implement just these semantics.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c: Move BLOCK_FILTER_INPUT,
BLOCK_FILTER_OUTPUT_BLOCK_FILTER_TEMP from here...
* common/iobuf.h: ... to here and rename to IOBUF_INPUT, IOBUF_OUTPUT
and IOBUF_TEMP, respectively. Where appropriate, use these macros
instead of a literal.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* common/iobuf.c (BLOCK_FILTER_INPUT): Define. Where appropriate, use
this instead of a literal.
(BLOCK_FILTER_OUTPUT): Likewise.
(BLOCK_FILTER_TEMP): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/openpgp-oid.c (oidtable): Change alias.
--
This is a cosmetic change so that common and expected common
algorithms line up nicely in a keylisting. For example:
pub ed25519/C68CE6D1ED0319C8 2015-08-06
uid [ultimate] Curve25519 Test 150806.1
sub cv25519/49238B9F0712C9BF 2015-08-06
sub rsa2048/8AEAF74014699D2C 2015-08-06
sub cv25519/8EC3776830B08736 2015-08-06
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* common/i18n.c (USE_MSGCACHE): New.
(msgcache) [!USE_MSGCACHE]: Do not define.
(i18n_localegettext): Repalce #if conditions by USE_MSGCACHE.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* common/i18n.c (msg_cache_s, msg_cache_head_s): New.
(msgcache): New.
(i18n_localegettext): Implement locale dependent lookup.
--
This is the second and final part of the change to use the gpg
provided locale for Pinentry strings. It does not yet work on
Windows, though.
This commit should resolve
Debian-bug-id: 788983
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/session-env.c (stdenvnames): Add DBUS_SESSION_BUS_ADDRESS.
--
pinentry-gnome3 talks to the gcr prompter via dbus. Without this
environment variable, it can't find the correct session to talk to.
* agent/agent.h (LunderscorePROTO): New.
* common/util.h (GNUPG_GCC_ATTR_FORMAT_ARG): New.
* common/i18n.h (GNUPG_GCC_ATTR_FORMAT_ARG): New. Use for
i18n_localegettext. Expand LunderscorePROTO.
* agent/genkey.c (check_passphrase_constraints): Use xtryasprintf
again to keep the old translations.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* po/Makevars (XGETTEXT_OPTIONS): Add keyword "L_".
* common/i18n.c (i18n_localegettext): New stub.
* common/i18n.h: Expand the LunderscoreIMPL macro.
* agent/agent.h (L_): New.
(LunderscoreIMPL): New.
* agent/call-pinentry.c (setup_qualitybar): Add arg ctrl anc change
caller.
* agent/findkey.c (try_unprotect_cb): Add local var ctrl.
* agent/genkey.c (check_passphrase_constraints): Replace xtryasprintf
by xtrystrdup to avoid gcc warning. Unfortinately this changes the
string.
(agent_ask_new_passphrase): Cleanup the use of initial_errtext.
--
Static strings in gpg-agent need to be translated according to the
locale set by the caller. This is required so that a gpg-agent can be
started in one locale and a gpg can be run in another. If we don't do
this the static strings (prompt, buttons) are not or in the wrong
locale translated while dynamic strings (e.g. key description) uses
the locale of gpg.
This is only the first part of the change the actual local switching
still needs to be implemented.
Debian-bug-id: 788983
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/libjnlib-config.h: Remove.
* common/common-defs.h (getenv) [HAVE_GETENV]: New. From removed
header.
(getpid) [HAVE_W32CE_SYSTEM]: New. From removed header.
* common/argparse.c: Include util.h and common-defs.h. Replace
jnlib_ macro names for non-GNUPG builds by x* names.
* common/dotlock.c: Ditto.
* common/logging.c: Include util.h and common-defs.h. Replace jnlib_
symbol names by x* names.
* common/strlist.c: Ditto.
* common/utf8conv.c: Ditto.
* common/w32-reg.c: Ditto.
* common/mischelp.c: Ditto. Also remove _jnlib_free.
* common/stringhelp.c: Ditto.
(JNLIB_LOG_WITH_PREFIX): Do not depend on this macro.
* common/logging.h (JNLIB_LOG_WITH_PREFIX): Do not depend on this
macro.
--
This is part 1 of the patches to merge the jnlib files into common/.
It does not make much sense to keep jnlib/ files separate. They are
not often use elsewhere and maintaining the complex marcos stuff is
too troublesome for the future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.h: Move to ../dirmngr/.
* common/dns-cert.c: Move to ../dirmngr/. Change args to return the
key as a buffer.
* common/t-dns-cert.c: Move to ../dirmngr/.
* common/pka.c, common/pka.h, common/t-pka.c: Remove.
* dirmngr/server.c (data_line_cookie_write): Factor code out to
data_line_write and make it a wrapper for that.
(data_line_write): New.
(cmd_dns_cert): New.
(register_commands): Register new command.
* g10/Makefile.am (LDADD): Remove DNSLIBS.
* g10/call-dirmngr.c (dns_cert_parm_s): New.
(dns_cert_data_cb, dns_cert_status_cb): New.
(gpg_dirmngr_dns_cert): New.
(gpg_dirmngr_get_pka): New.
* g10/gpgv.c (gpg_dirmngr_get_pka): New dummy function.
* g10/keyserver.c (keyserver_import_cert): Replace get_dns_cert by
gpg_dirmngr_dns_cert.
(keyserver_import_pka): Replace get_pka_info by gpg_dirmngr_get_pka.
* g10/mainproc.c: Include call-dirmngr.h.
(pka_uri_from_sig): Add CTX arg. Replace get_pka_info by
gpg_dirmngr_get_pka.
--
With this patch gpg does not do any network access itself but uses
dirmngr for that. Note that we need to keep linking to NETLIBS due to
the logging code and because we need TCP for our socket emulation
under Windows. Probably also required for Solaris etc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/convert.c (hex2str): Set ERRNO. Return adjusted COUNT.
--
hex2str is only used at one place for in-place converting an hex
encoded passphrase. This change does not affect this use. The change
is however useful to use the function for in-place conversion of
arbitrary hex encoded strings.
Take care for in-place conversion of a hex string encoding binary data
you need to use it this way:
if (hex2str (string, string, strlen (string) + 1, &length)
oops ("probably out of memory but see ERRNO");
for (i=0; i < length; i++)
foo (string[i));
Note that strlen() + 1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/Makefile.am (t_jnlib_src): Remove t-support.c.
--
Since test programs are linked to libgcrypt and libgpg-error, there
is no need to include t-support.c.
GnuPG-bug-id: 1862, 1915
* g10/options.h (KEYSERVER_HTTP_PROXY): New.
(KEYSERVER_USE_TEMP_FILES, KEYSERVER_KEEP_TEMP_FILES): Remove.
(KEYSERVER_TIMEOUT): New.
* common/keyserver.h (KEYSERVER_TIMEOUT): Remove.
* g10/keyserver.c (keyserver_opts): Remove obsolete "use-temp-files"
and "keep-temp-files". Add "http-proxy" and "timeout".
(parse_keyserver_options): Remove 1.2 compatibility option
"honor-http_proxy". Remove "use-temp-files" and "keep-temp-files"
code.
--
Note that many of these options where implicitly used by passing any
unknown option down to the former keyserver helpers. The don't exist
anymore thus we need to make them explicit. Another patch will convey
them to dirmngr. Temp files are not anymore used thus they can be
removed and will be ignored when used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gettime.c (gnupg_gmtime): New.
(gnupg_get_isotime): Use it. Also take care of an gmtime_t returning
an error.
--
The fix in gnupg_get_isotime is only to cover up a theoretical broken
time (e.g. a value of (time_t)(-2) which is not mapped beyond 2038 on
32 bit systems).
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gettime.c (isotime_human_p): Add arg date_only.
(isodate_human_to_tm): New.
* common/t-gettime.c (test_isodate_human_to_tm): New.
(main): Call new test.
--
This function in intended as replacement for
strptime (foo, "%Y-%m-%d", &bar)
which is not available under Windows.
* common/gettime.h (parse_timestamp): New declaration.
* common/gettime.c (_win32_timegm): New function imported from
gpgme/src/conversion.c:_gpgme_timegm.
(parse_timestamp): New function imported from
gpgme/src/conversion.c:_gpgme_parse_timestamp.
--
Signed-off-by: Neal H. Walfield <neal@g10code.de>
* common/stringhelp.h (strsplit): New declaration.
* common/stringhelp.c (strsplit): New function.
* common/t-stringhelp.c (test_strsplit): New function.
(main): Call it here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.de>
* common/mbox-util.c (mem_count_chr): New.
(my_memstr): New.
(has_invalid_email_chars): Change args to work on a buffer.
(is_valid_mailbox_mem): New.
(is_valid_mailbox): Rewrite to use is_valid_mailbox_mem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/http.c (send_request): Set the requested for SNI.
* dirmngr/ks-engine-hkp.c (map_host): Return the poolname and not
the selecting a host.
--
GnuPG-bug-id: 1792
Thanks to davidw for figuring out the problem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/argparse.c (show_help): Take care of flag value
(usage): Ditto.
--
It is common that the long usage note starts with the short usage
note. The new flag feature allows to combine both.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_oid_to_str): Take care of
gcry_mpi_get_opaque returning NULL. Remove useless condition !BUF.
--
It is possible that an opaque MPI stores just a NULL pointer. Take
care of that before incrementing the pointer. We return an error in
this case because at least a length byte is required.
Found due to hint from stack 0.3:
bug: anti-simplify
model: |
%tobool15 = icmp ne i8* %incdec.ptr, null, !dbg !567
--> true
stack:
- /home/wk/s/gnupg/common/openpgp-oid.c:220:0
ncore: 1
core:
- /home/wk/s/gnupg/common/openpgp-oid.c:212:0
- pointer overflow
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.c (get_dns_cert): Make r_key optional.
* common/pka.c: Rewrite for the new hash based lookup.
* common/t-pka.c: New.
* configure.ac: Remove option --disable-dns-pka.
(USE_DNS_PKA): Remove ac_define.
* g10/getkey.c (parse_auto_key_locate): Always include PKA.
--
Note that although PKA is now always build, it will only work if
support for looking up via DNS has not been disabled.
The new PKA only works with the IPGP DNS certtype and shall be used
only to retrieve the fingerprint and optional the key for the first
time. Due to the security problems with DNSSEC the former assumption
to validate the key using DNSSEC is not anymore justified. Instead an
additional layer (e.g. Trust-On-First-Use) needs to be implemented to
track change to the key. Having a solid way of getting a key matching
a mail address is however a must have.
More work needs to go into a redefinition of the --verify-options
pka-lookups and pka-trust-increase. The auto-key-locate mechanism
should also be able to continue key fetching with another methods once
the fingerprint has been retrieved with PKA.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.c (get_dns_cert): Add arg want_certtype. Change all
callers.
(CERTTYPE_): Move constants to ...
* common/dns-cert.h: here as DNS_CERTTYPE_.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mailbox.c: Move to ...
* common/mbox-util.c: new file.
* common/mbox-util.h: New. Include where needed.
* g10/t-mailbox.c: Move to ...
* common/t-mbox-util.c: new file.
--
This will make it easier to use the code by other modules in common/.
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (get_default_pinentry_name): New.
(gnupg_module_name): Use that for the default pinentry.
(gnupg_module_name_flush_some): New.
* agent/gpg-agent.c (agent_sighup_action): Flush some module names.
* agent/call-pinentry.c (start_pinentry): Do not modify
opt.pinentry_program.
--
The idea with this change is that under Windows we can install a
simple native Windows pinentry as "pinentry-basic" and a full GUI
version may then later install pinentry-gtk etc which would then
automatically be used.
Unfortunately installing another pinentry from a different package
would clobber the GnuPG core directory which is not nice. To fix that
we would need to agree on standard installation directories for GUIs
to also look there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (w32_rootdir): Use Unicode fucntion not only for
WinCE.
--
This uses the same code We used for WindowsCE. It has not been tested
with a Unicode requiring installation directory.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (list_config): Replace print_sanitized_string2 by
es_write_sanitized.
* common/stringhelp.c (print_sanitized_buffer2): Remove.
(print_sanitized_buffer, print_sanitized_utf8_buffer): Remove.
(print_sanitized_utf8_buffer, print_sanitized_utf8_string): Remove.
(print_sanitized_string): Remove.
* sm/certdump.c (print_dn_part, print_dn_parts): Remove arg FP.
(pretty_print_sexp, gpgsm_print_name2, gpgsm_print_name): Remove.
--
Mixing stdio and estream is never a good idea. This fix also allows
us to remove a lot of garbage.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
GnuPG-bug-id: 1822
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c: (iobuf_open): initialize len
--
In iobuf_open, IOBUFCTRL_DESC and IOBUFCTRL_INIT commands are invoked
(via file_filter()) on fcx, passing in a pointer to an uninitialized
len.
With these two commands, file_filter doesn't actually do anything with
the value of len, so there's no actual risk of use of uninitialized
memory in the code as it stands.
However, some static analysis tools might flag this situation with a
warning, and initializing the value doesn't hurt anything, so i think
this trivial cleanup is warranted.
Debian-Bug-Id: 773469
* common/dotlock.c: (dotlock_create_unix) avoid double-close()
in unusual situations.
--
close(2) says:
close() should not be retried after an EINTR since this may
cause a reused descriptor from another thread to be closed.
Before this patch was applied, if close(fd) failed with EINTR, it
would be closed again in the write_failed: block.
It could also have been closed a second time in the case that
(use_hardlinks_p (h->tname)) evaluated to something other than 0 or 1.
This patch avoids both of those scenarios.
Note that close() could still be called twice on the same file
descriptor if the first close(fd) fails but errno is not EINTR. I'm
not sure the right thing to do in that scenario. An alternate
resolution could be to unequivocally set fd to -1 after the first
failed close(fd), avoiding the errno == EINTR test.
Debian-Bug-Id: 773423
* agent/command-ssh.c (setup_ssh_env): Move code to ...
* agent/gpg-agent.c (agent_copy_startup_env): .. new function. Change
calllers.
* agent/command.c (start_command_handler): Call that fucntion for
restricted connections.
--
A remote connection is and should not be able to setup the local
session environment. However, unless --keep-display is used we would
be left without an environment and thus pinentry can't be used. The
fix is the same as used for ssh-agent connection: We use the default
environment as used at the startup of the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/http.c (send_request): Print TLS alert info
(connect_server): Detect bogus DNS entry.
--
1. Prints the TLS alert description.
2. Detect case where the DNS returns an IP address but the server is
not reachable at this address. This may happen for a server which
is reachable only at IPv6 but but the local machine has no full
IPv6 configuration.
* agent/agent.h (opt): Add field extra_socket.
(server_control_s): Add field restricted.
* agent/command.c: Check restricted flag on many commands.
* agent/gpg-agent.c (oExtraSocket): New.
(opts): Add option --extra-socket.
(socket_name_extra): New.
(cleanup): Cleanup that socket name.
(main): Implement oExtraSocket.
(create_socket_name): Add arg homedir and change all callers.
(create_server_socket): Rename arg is_ssh to primary and change
callers.
(start_connection_thread): Take ctrl as arg.
(start_connection_thread_std): New.
(start_connection_thread_extra): New.
(handle_connections): Add arg listen_fd_extra and replace the
connection starting code by parameterized loop.
* common/asshelp.c (start_new_gpg_agent): Detect the use of the
restricted mode and don't fail on sending the pinentry environment.
* common/util.h (GPG_ERR_FORBIDDEN): New.
* common/openpgp-oid.c (openpgp_oid_to_str): Fix unsigned underflow.
* common/t-openpgp-oid.c (BADOID): New.
(test_openpgp_oid_to_str): Add test cases.
--
The code has an obvious error by not considering invalid encoding for
arc-2. A first byte of 0x80 can be used to make a value of less then
80 and we then subtract 80 from that value as required by the OID
encoding rules. Due to the unsigned integer this results in a pretty
long value which won't fit anymore into the allocated buffer.
The fix is obvious. Also added a few simple test cases. Note that we
keep on using sprintf instead of snprintf because managing the
remaining length of the buffer would probably be more error prone than
assuring that the buffer is large enough. Getting rid of sprintf
altogether by using direct conversion along with membuf_t like code
might be possible.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported from libksba commit f715b9e156dfa99ae829fc694e5a0abd23ef97d7
* common/argparse.c (initialize): Use correct value.
--
This avoids a dead path in the argparse code.
It's not clear that this is needed, however, since
ARGPARSE_AMBIGUOUS_COMMAND is never actually used in the code.
Another approach would be to trim out ARGPARSE_AMBIGUOUS_COMMAND
entirely.
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/http.c (write_server) [W32]: Rework to use send() instead of
write even when build with npth.
(cookie_read) [W32]: Rework to use recv() instead of read even when
build with npth.
* configure.ac <adns>: Use adns_free as probe function for libadns.
(HAVE_ADNS_FREE): Remove bogus tests to set this and remove the macro.
(ADNSLIBS): Do not ac_subst - it is only used within configure.
--
adns_free is required on Windows anyway (for robustness reasons) and
it has been around for so long now that we do not need a separate
test. An upstream adns 1.5 has meanwhile been release but I doubt that
this has the required Windows code - and it is not libtool based
anyway.
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/gpg-agent.c (oDebugQuickRandom): New.
(opts): New option --debug-quick-random.
(main): Use new option.
* common/asshelp.c (start_new_gpg_agent): Add hack to pass an
additional argument for the agent name.
* tests/openpgp/defs.inc: Pass --debug-quick-random to the gpg-agent
starting parameters.
* tests/openpgp/version.test: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/argparse.h (ARGPARSE_INVALID_ARG): New.
* common/argparse.c: Include limits h and errno.h.
(initialize): Add error strings for new error constant.
(set_opt_arg): Add range checking.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* configure.ac (NEED_NTBTLS_ABI, NEED_NTBTLS_VERSION): New.
(HTTP_USE_NTBTLS): New. Prefer over GNUTLS.
* m4/ntbtls.m4: New.
* m4/Makefile.am (EXTRA_DIST): Add new file.
* common/http.c: Add conditionals to eventually use NTBTLS.
--
This is only the configure stuff. If you have NTBTLS installed GNUTLS
will not be used but there won't be any https support either :-(.
This patch is used to have a real world test bench for the forthcoming
library.
* common/exechelp-posix.c: Remove weak pragmas.
* common/sexputil.c (make_canon_sexp_from_rsa_pk): Remove double
const.
--
We do not use Pth anymore and thus there is no more need for the weak
pragmas.
* common/openpgpdefs.h (PUBKEY_ALGO_EDDSA): Change to 22.
* g10/keygen.c (ask_curve): Reword the Curve25519 warning note.
--
In the hope that the IETF will eventually assign 22 for EdDSA using
the draft-koch-eddsa-for-openpgp-01 specs we start using this number.
* common/http.c (http_session_ref): Allow for NULL arg.
--
We always test for a an existing session and thus passing NULL as
session object should be allowed.
Reported-by: Jens Lechtenboerger
* common/openpgp-oid.c (struct oidtable): New.
(openpgp_curve_to_oid): Rewrite and allow OID as input.
(openpgp_oid_to_curve): Make use of the new table.
--
Due to the previous change we now usually store the OID with the
private key and not the name. Thus during import we do not anymore
need to map the name to an oid but can use the oid directly. We fix
that by extending openpgp_curve_to_oid to allow an oidstr as input.
* common/estream-printf.c, common/estream-printf.h: Change license.
* common/estream.c, common/estream.h: Ditto.
--
g10 Code is the sole copyright holder of Libestream and thus as CEO I
have the rights to to change the license. This copy here in GnuPG is
currently the most current one thus the change is recorded in this
repository. This change is also deemed valid for all older versions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/t-timestuff.c (test_timegm): Use timegm if available.
(main): Set TX to UTC if timegm is not available.
--
On OpenBSD 5.3 i386 that test failed due to the use of mktime.
Reported-by: Claus Assmann
* common/iobuf.c (direct_open): Add arg MODE700.
(iobuf_create): Ditto.
* g10/openfile.c (open_outfile): Add arg RESTRICTEDPERM. Change call
callers to pass 0 for it.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Here pass true for new
arg.
* g10/export.c (do_export): Pass true for new arg if SECRET is true.
--
GnuPG-bug-id: 1653.
Note that this works only if --output has been used.
* g10/getkey.c (get_user_id): Do not call xmalloc with 0.
* common/xmalloc.c (xmalloc, xcalloc): Take extra precaution not to
pass 0 to the arguments.
--
The problem did not occur in 1.x because over there the xmalloc makes
sure to allocate at least one byte. With 2.x for most calls the
xmalloc of Libgcrypt is used and Libgcrypt returns an error insteead
of silent allocating a byte. Thus gpg 2.x bailed out with an
"Fatal: out of core while allocating 0 bytes".
The extra code in xmalloc.c is for more robustness for the other
xmalloc calls.
* common/http.c (http_open): Add arg httphost.
(http_open_document): Pass NULL for httphost.
(send_request): Add arg httphost. If given, use HTTPHOST instead of
SERVER. Use https with a proxy if requested.
(http_verify_server_credentials): Do not stop at the first error
message.
* dirmngr/ocsp.c (do_ocsp_request): Adjust call to http_open.
* keyserver/curl-shim.c (curl_easy_perform): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Ditto.
* common/Makefile.am ($(PROGRAMS)): New rule
(t_http_LDADD): Use libcommontls.a without directory prefix.
* dirmngr/Makefile.am ($(PROGRAMS)): New rule.
* agent/cvt-openpgp.c (try_do_unprotect_arg_s): Add field "curve".
(get_keygrip): Add and use arg CURVE.
(convert_secret_key): Ditto.
(convert_transfer_key): Ditto.
(get_npkey_nskey): New.
(prepare_unprotect): Replace gcrypt functions by
get_npkey_nskey. Allow opaque MPIs.
(do_unprotect): Use CURVE instead of parameters.
(convert_from_openpgp_main): Ditto.
(convert_to_openpgp): Simplify.
* g10/import.c (one_mpi_from_pkey): Remove.
(transfer_secret_keys): Rewrite to use the curve instead of the
parameters.
* g10/parse-packet.c (parse_key): Mark protected MPIs with USER1 flag.
* common/openpgp-oid.c (openpgp_curve_to_oid): Allow the use of
"NIST P-256" et al.
* g10/keygen.c (ask_curve): Add arg ALGO.
(generate_keypair): Rewrite the ECC key logic.
* tests/openpgp/ecc.test: Provide the "ecc" passphrase.
* common/http.c (http_session_t): Add field "refcount".
(_my_socket_new, _my_socket_ref, _my_socket_unref): Add debug code.
(send_request, my_npth_read, my_npth_write): Use SOCK object for the
transport ptr.
(http_session_release): Factor all code out to ...
(session_unref): here. Deref SOCK.
(http_session_new): Init refcount and transport ptr.
(http_session_ref): New. Ref and unref all assignments.
--
Having the reference counted session objects makes it easier for the
application to pass around only an estream. Without that the
application would need to implement an es_onclose machinery for the
session object.
* configure.ac (HAVE_NPTH): New ac_define.
* common/estream.c: Use USE_NPTH instead of HAVE_NPTH.
* common/http.c: Ditto. Replace remaining calls to pth by npth calls.
(connect_server): Remove useless _().
* common/exechelp-posix.c, common/exechelp-w32.c
* common/exechelp-w32ce.c: Use HAVE_PTH to include npth.h.
* common/init.c (_init_common_subsystems): Remove call to pth_init.
* common/sysutils.c (gnupg_sleep): Use npth_sleep.
* scd/ccid-driver.c (my_sleep): Ditto.
--
USE_NPTH is used in case were we may build with and without nPth. The
missing definition HAVE_NPTH didn't allowed us to build outher sources
with nPTh support.
* src/estream.c (estream_internal): Add field SAMETHREAD.
(init_stream_lock, lock_stream, trylock_stream, unlock_stream): Use it.
(parse_mode): Add arg SAMETHREAD and parse that keyword.
(es_initialize): Rename to ...
(init_stream_obj): this. Add arg SAMETHREAD.
(es_create): Add arg SAMETHREAD. Call init_stream_lock after
init_stream_obj.
(doreadline): Call es_create with samethread flag.
(es_fopen, es_mopen, es_fopenmem, es_fopencookie, do_fdopen)
(do_fpopen, do_w32open): Implement "samethread" keyword.
(es_freopen): Take samthread flag from old stream.
(es_tmpfile): Call es)_create w/o samethread.
--
Note: Unfortunately es_tmpfile has no mode arg so that we can't use
samethread.
* agent/gpg-agent.c (main): Make sure homedir is absolute.
* common/asshelp.c (lock_spawning): Create lock file with an absolute
name.
(start_new_gpg_agent): Use an absolute name for the socket and pass
option --homedir to the agent.
(start_new_dirmngr): Use an absolute name for the --homedir.
--
This patch makes gpg's --homedir option behave again like in older
versions. This is done by starting a new agent for each different
home directory. Note that this assumes --use-standard-socket is used
which is the default for 2.1.
* common/estream.c (es_freopen): Remove useless check for STREAM.
* kbx/keybox-blob.c (_keybox_create_x509_blob): Remove useless check
for BLOB.
* tools/sockprox.c (run_proxy): Do not fclose(NULL).
--
Found by Hans-Christoph Steiner with cppcheck.
* common/mischelp.h (JNLIB_GCC_HAVE_PUSH_PRAGMA): New.
* dirmngr/dirmngr.c (handle_tick): Factor time check out to ...
(time_for_housekeeping_p): new.
--
I am not sure whether that y2038 hack is really useful but it might
make me smile in my retirement.
* dirmngr/ks-engine-hkp.c (ks_hkp_search, ks_hkp_get): Print SOURCE
status lines.
* g10/call-dirmngr.c (ks_status_parm_s): New.
(ks_search_parm_s): Add field stparm.
(ks_status_cb): New.
(ks_search_data_cb): Send source to the data callback.
(gpg_dirmngr_ks_search): Change callback prototope to include the
SPECIAL arg. Adjust all users. Use ks_status_cb.
(gpg_dirmngr_ks_get): Add arg r_source and use ks_status_cb.
* g10/keyserver.c (search_line_handler): Adjust callback and print
"data source" disgnostic.
(keyserver_get): Print data source diagnostic.
--
It has often been requested that the actually used IP of a keyservers
is shown in with gpg --recv-key and --search-key. This is helpful if
the keyserver is actually a pool of keyservers. This patch does this.
* common/mischelp.h (JNLIB_GCC_A_PRINTF): Use __gnu_printf__
(JNLIB_GCC_A_NR_PRINTF): Ditto.
--
Our printf supports most of the GNU features and thus we can silence
the warnings from mingw.
* agent/call-scd.c (start_scd): Replace int by assuan_fd_t.
(start_pinentry): Ditto.
* common/asshelp.c (start_new_gpg_agent): Replace int by assuan_fd_t.
* common/dotlock.c (GNUPG_MAJOR_VERSION): Include stringhelp.h for
prototypes on Windows and some other platforms.
* common/logging.c (fun_writer): Declare addrbuf only if needed.
* g10/decrypt.c (decrypt_message_fd) [W32]: Return not_implemented.
* g10/encrypt.c (encrypt_crypt) [W32]: Return error if used in server
mode.
* g10/dearmor.c (dearmor_file, enarmor_file): Replace GNUPG_INVALID_FD
by -1 as temporary hack for Windows.
* g10/export.c (do_export): Ditto.
* g10/revoke.c (gen_desig_revoke, gen_revoke): Ditto.
* g10/sign.c (sign_file, clearsign_file, sign_symencrypt_file): Ditto.
* g10/server.c (cmd_verify, gpg_server) [W32]: Return an error.
--
The gpg server mode is not actual working and thus we can avoid the
warnings by explicitly disabling the mode. We keep it working under
Unix, though.
* common/estream.c (ESTREAM_MUTEX_UNLOCK): Use int dummy dummy
functions.
(ESTREAM_MUTEX_INITIALIZE): Ditto.
--
GnuPG-bug-id: 1566
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 571bcd4662)
Reolved conflicts:
common/estream.c
Warning: estream.c still uses pth_mutex_* which is definitely wrong.
Needs to be investigated.
* agent/gpg-agent.c [W32]: Include Several Windows header.
(opts): Change help text for enable-ssh-support.
(opts, main): Add option --enable-putty-support
(putty_support, PUTTY_IPC_MAGIC, PUTTY_IPC_MAXLEN): New for W32.
(agent_init_default_ctrl): Add and asssert call.
(putty_message_proc, putty_message_thread): New.
(handle_connections) [W32]: Start putty message thread.
* common/sysutils.c (w32_get_user_sid): New for W32 only
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add
--enable-ssh-support and --enable-putty-support. Make the
configuration group visible at basic level.
* agent/command-ssh.c (serve_mmapped_ssh_request): New for W32 only.
--
This patch enables support for Putty. It has been tested with Putty
0.62 using an Unix created ssh key copied to the private-keys-v1.d
directory on Windows and with a manually crafted sshcontrol file. It
also works with a smartcard key.
May thanks to gniibe who implemented a proxy in Python to test the
putty/gpg-agent communication.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f32499f99)
Resolved conflicts:
NEWS
agent/agent.h
agent/gpg-agent.c: Convert from pth to npth.
common/sysutils.c
common/sysutils.h
* jnlib/argparse.h (ARGPARSE_OPT_IGNORE): New.
(ARGPARSE_TYPE_MASK): New, for internal use.
(ARGPARSE_ignore): New.
* jnlib/argparse.c (optfile_parse, arg_parse): Replace remaining
constants by macros.
(optfile_parse): Implement ARGPARSE_OPT_IGNORE.
(arg_parse): Exclide ignore options from --dump-options.
--
In addition to the ignore-invalid-option (commit 41d56433) it is often
useful to mark options in a configuration which as NOP. For example
options which have no more function at all but can be expected to be
found in existing conf files. Such an option (or command) may now be
given as
ARGPARSE_ignore (300, "obsolete-option")
The 300 is merely used as a non-valid single option name much like
group names or the 500+n values used for long options.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 54c54e2824)
Resolved conflicts:
common/argparse.c: Fixed.
* common/utf8conv.c: Remove dynload.h.
(load_libiconv): Remove. Remove all calls to it.
--
The iconv functions are standard feature on most systems and in any
case libiconv can be used to provide the functions. The old code used
to dlopen iconv.dll on Windows. This goes back to GnuPG-1 which was
designed as a one-binary program without any hard dependencies.
GnuPG2 however demands a lot of libraries anyway and thus there is no
more need for the fragile code to load a possible wrong version of
iconv.dll at runtime.
* g10/gpg.c (oLegacyListMode, opts, main): Add --legacy-list-mode.
* g10/options.h (struct opt): Add field legacy_list_mode.
* g10/keydb.h (PUBKEY_STRING_SIZE): New.
* g10/keyid.c (pubkey_string): New.
* g10/import.c (import_one, import_secret_one): Use pubkey_string.
* g10/keylist.c (print_seckey_info): Ditto.
(print_pubkey_info, print_card_key_info): Ditto.
(list_keyblock_print): Ditto.
* g10/mainproc.c (list_node): Ditto.
* g10/pkclist.c (do_edit_ownertrust, build_pk_list): Ditto.
* g10/keyedit.c (show_key_with_all_names): Ditto. Also change the
format.
(show_basic_key_info): Ditto.
* common/openpgp-oid.c (openpgp_curve_to_oid): Also allow "ed25519".
(openpgp_oid_to_curve): Downcase "ed25519"
--
For ECC it seems to be better to show the name of the curve and not
just the size of the prime field. The curve name does not anymore fit
into the "<size><letter>" descriptor (e.g. "2048R") and a fixed length
format does not work either. Thus the new format uses
"rsa2048" - RSA with 2048 bit
"elg1024" - Elgamal with 1024 bit
"ed25519" - ECC using the curve Ed25519.
"E_1.2.3.4" - ECC using the unsupported curve with OID "1.2.3.4".
unless --legacy-list-mode is given. In does not anymore line up
nicely in columns thus I expect further changes to this new format.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (map_cipher_openpgp_to_gcry): Use explicit mapping and
use enums for the arg and return value.
(map_cipher_gcry_to_openpgp): Ditto.
(openpgp_cipher_blocklen): Use constant macros.
(openpgp_cipher_test_algo): Use mapping function and prepare to
disable algorithms.
(openpgp_cipher_algo_name): Do not use Libgcrypt.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Replace
CGRY_CIPHER_* by CIPHER_ALGO_*.
* common/openpgpdefs.h (cipher_algo_t): Remove unused
CIPHER_ALGO_DUMMY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Remove check for uint64 and UINT64_C.
* include/types.h: Remove u64 stuff.
* common/types.h: Ditto.
--
There have been relicts from GnuPG-1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_curve_to_oid): Change OID for
Ed25519. Add brainpool OIDs.
(openpgp_oid_to_curve): Ditto.
--
This change is required to the change in Libgcrypt. Note that we will
likely use a different OpenPGP algorithm ID for EdDSA and thus the
current Ed25519 implementation will not stay with us.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/membuf.c (put_membuf_printf): New.
--
This is just a convenience function for easier code readability.
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (MAX_NESTING_FILTER): New.
(iobuf_push_filter2): Limit the nesting level.
* g10/mainproc.c (mainproc_context): New field ANY. Change HAVE_DATA
and ANY_SIG_SIGN to bit fields of ANY. Add bit field
UNCOMPRESS_FAILED.
(proc_compressed): Avoid printing multiple Bad Data messages.
(check_nesting): Return GPG_ERR_BAD_DATA instead of UNEXPECTED_DATA.
--
This is a more general fix for the nested compression packet bug. In
particular this helps g10/import.c:read_block to stop pushing
compression filters onto an iobuf stream. This patch also reduces the
number of error messages for the non-import case.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 35e40e2d51)
Resolved conflicts:
common/iobuf.c
g10/mainproc.c
* common/homedir.c (w32_bin_is_bin, w32_portable_app) [W32]: New.
(check_portable_app) [W32]: New.
(standard_homedir, default_homedir) [W32]: Support the portable flag.
(w32_rootdir, w32_commondir) [W32]: Ditto.
(gnupg_bindir, gnupg_cachedir, dirmngr_socket_name) [W32]: Ditto.
* common/logging.h (JNLIB_LOG_NO_REGISTRY): New.
* common/logging.c (no_registry): New variable.
(log_set_prefix, log_get_prefix): Set/get that variable.
(do_logv): Do not check the registry if that variable is set.
--
Beware: This code has not been tested because it is not yet possible
to build GnuPG 2.1 for Windows. However, the code will be the base
for an implementation in 2.0.
A portable use of GnuPG under Windows means that GnuPG uses a home
directory depending on the location of the actual binary. No registry
variables are considered. The portable mode is enabled if in the
installation directory of the the binary "gpgconf.exe" and a
file "gpgconf.ctl" are found. The latter file is empty or consists
only of empty or '#' comment lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (mem_cleanup_item_t): New.
(run_mem_cleanup): New.
(_init_common_subsystems): Add an atexit for it.
(register_mem_cleanup_func): New.
* g10/kbnode.c (cleanup_registered): New.
(release_unused_nodes): New.
(alloc_node): Call register_mem_cleanup_func.
--
It is often time consuming to figure out whether still allocated
memory at process termination is fine (e.g. a cache) or a problem. To
help for that register_mem_cleanup_func may now be used to cleanup
such memory. The run time of the program will be longer; if that
turns out to be a problem we can change the code to only run in
debugging mode.
* common/agent-opt.c: New.
* common/shareddefs.h: New.
* common/Makefile.am: Add new files.
* agent/agent.h: Include shareddefs.h.
(pinentry_mode_t): Factor out to shareddefs.h.
* agent/command.c (option_handler): Use parse_pinentry_mode.
* common/iobuf.c (iobuf_seek): Fix for temp streams.
* g10/pubkey-enc.c (get_session_key, get_it): Add some log_clock calls.
* g10/keydb.c (dump_search_desc): New.
(enum_keyblock_states, struct keyblock_cache): New.
(keyblock_cache_clear): New.
(keydb_get_keyblock, keydb_search): Implement a keyblock cache.
(keydb_update_keyblock, keydb_insert_keyblock, keydb_delete_keyblock)
(keydb_rebuild_caches, keydb_search_reset): Clear the cache.
--
Gpg uses the key database at several places without a central
coordination. This leads to several scans of the keybox for the same
key. To improve that we now use a simple cache to store a retrieved
keyblock in certain cases. In theory this caching could also be done
for old keyrings, but it is a bit more work and questionable whether
it is needed; the keybox scheme is anyway much faster than keyrings.
Using a keybox with 20000 384 bit ECDSA/ECHD keypairs and a 252 byte
sample text we get these values for encrypt and decrypt operations on
an Core i5 4*3.33Ghz system. The option --trust-model=always is used.
Times are given in milliseconds wall time.
| | enc | dec | dec,q |
|-----------+-----+-----+-------|
| key 1 | 48 | 96 | 70 |
| key 10000 | 60 | 98 | 80 |
| key 20000 | 69 | 106 | 88 |
| 10 keys | 540 | 290 | 70 |
The 10 keys test uses a mix of keys, the first one is used for
decryption but all keys are looked up so that information about are
printed. The last column gives decryption results w/o information
printing (--quiet).
The keybox is always scanned sequentially without using any index. By
adding an index to the keybox it will be possible to further reduce
the time required for keys stored to the end of the file.
* common/logging.c (log_clock): New.
* g10/gpg.c (set_debug): Print clock debug flag.
* g10/options.h (DBG_CLOCK_VALUE, DBG_CLOCK): New.
--
To actually use log_clock you need to enable the code in
logginc.c:log_check() and link against librt. --debug 4096 may then
be used to enable it at runtime.
* common/argparse.c (iio_item_def_s, IIO_ITEM_DEF): New.
(initialize): Init field IIO_LIST.
(ignore_invalid_option_p): New.
(ignore_invalid_option_add): New.
(ignore_invalid_option_clear): New.
(optfile_parse): Implement meta option.
--
This option is currently of no use. However, as soon as it has been
deployed in all stable versions of GnuPG, it will allow the use of the
same configuration file with an old and a new version of GnuPG. For
example: If a new version implements the option "foobar", and a user
uses it in gpg.conf, an old version of gpg would bail out with the
error "invalid option". To avoid that the following line can be put
above that option in gpg.conf
ignore-invalid-option foobar
This meta option may be given several times or several option names
may be given as arguments (space delimited). Note that this option is
not available on the command line.
* common/utf8conv.c [HAVE_ANDROID_SYSTEM]: Do not include iconv.h.
(iconv_open, iconv_close, load_libiconv) [HAVE_ANDROID_SYSTEM]: New
dummy functions.
(set_native_charset) [HAVE_ANDROID_SYSTEM]: Force use of "utf-8".
(jnlib_iconv_open) [HAVE_ANDROID_SYSTEM]: Act the same as under W32.
(jnlib_iconv) [HAVE_ANDROID_SYSTEM]: Ditto.
(jnlib_iconv_close) [HAVE_ANDROID_SYSTEM]: Ditto.
--
Co-authored-by: Hans of Guardian <hans@guardianproject.info>
* agent/command-ssh.c (SPEC_FLAG_IS_ECDSA): New.
(struct ssh_key_type_spec): Add fields CURVE_NAME and HASH_ALGO.
(ssh_key_types): Add types ecdsa-sha2-nistp{256,384,521}.
(ssh_signature_encoder_t): Add arg spec and adjust all callers.
(ssh_signature_encoder_ecdsa): New.
(sexp_key_construct, sexp_key_extract, ssh_receive_key)
(ssh_convert_key_to_blob): Support ecdsa.
(ssh_identifier_from_curve_name): New.
(ssh_send_key_public): Retrieve and pass the curve_name.
(key_secret_to_public): Ditto.
(data_sign): Add arg SPEC and change callers to pass it.
(ssh_handler_sign_request): Get the hash algo from SPEC.
* common/ssh-utils.c (get_fingerprint): Support ecdsa.
* agent/protect.c (protect_info): Add flag ECC_HACK.
(agent_protect): Allow the use of the "curve" parameter.
* agent/t-protect.c (test_agent_protect): Add a test case for ecdsa.
* agent/command-ssh.c (ssh_key_grip): Print a better error code.
--
The 3 standard curves are now supported in gpg-agent's ssh-agent
protocol implementation. I tested this with all 3 curves and keys
generated by OpenSSH 5.9p1.
Using existing non-ssh generated keys will likely fail for now. To fix
this, the code should first undergo some more cleanup; then the fixes
are pretty straightforward. And yes, the data structures are way too
complicated.
* configure.ac (HAVE_BROKEN_TTYNAME): New ac_define set for Android
systems.
* common/util.h (gnupg_ttyname): New macro. Change all callers of
ttyname to use this macro instead.
(ttyname) [W32]: Rename to _gnupg_ttyname and use also if
HAVE_BROKEN_TTYNAME is defined.
* common/simple-pwquery.c (agent_send_all_options): Keep on using
ttyname unless HAVE_BROKEN_TTYNAME is set. This is because this file
may be used standalone.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
* common/Makefile.am (CLEANFILES): Rename to MAINTAINERCLEANFILES.
--
In general this is not required because automake does this for files
in BUILT_SOURCES anyway. However, having them in CLEANFILES is wrong.
This is bug#1398.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* common/estream-printf.c (_ESTREAM_PRINTF_MALLOC): Remove.
(_ESTREAM_PRINTF_FREE): Remove.
(_ESTREAM_PRINTF_REALLOC): New.
(fixed_realloc) [!_ESTREAM_PRINTF_REALLOC]): New.
(estream_vasprintf): Use my_printf_realloc instead of my_printf_malloc
and my_printf_free.
(dynamic_buffer_out): Use my_printf_realloc instead of realloc.
--
This bug will never happen in current GnuPG/Libgcrypt because we use
the standard memory allocation functions via Libgcrypt. However, when
used in other environments it would mess up the heap for an asprintf
with an output length larger than ~512 bytes.
This change might help to c+p a fingerprint from an HTML page without
being enclosed in a "pre" tag.
* common/userids.c (classify_user_id): Skip a second blank in the
middle of a fingerprint.
* common/dotlock.c (use_hardlinks_p, dotlock_take_unix): Check return
value of link().
* g13/g13.c: Make sure err is initialized.
* scd/scdaemon.c (main) [!USE_GCRY_THREAD_CBS]: Do not define ERR.
* scd/scdaemon.c (oDebugAssuanLogCats): New.
(opts): Add option --debug-assuan-log-cats.
(main): Implement option.
* common/asshelp.c (set_libassuan_log_cats): New.
--
The old way of setting the logging categories with an environment
variable is awkward if sdaemon is spawned from a running gpg-agent.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
* common/dns-cert.c: Remove iobuf.h.
(get_dns_cert): Rename to _get_dns_cert. Remove MAX_SIZE arg. Change
iobuf arg to a estream-t. Rewrite function to make use of estream
instead of iobuf. Require all parameters. Return an gpg_error_t
error instead of the type. Add arg ERRSOURCE.
* common/dns-cert.h (get_dns_cert): New macro to pass the error source
to _gpg_dns_cert.
* common/t-dns-cert.c (main): Adjust for changes in get_dns_cert.
* g10/keyserver.c (keyserver_import_cert): Ditto.
* doc/gpg.texi (GPG Configuration Options): Remove max-cert-size.
Werner Koch