* scd/app-openpgp.c (struct app_local_s): Remove VARLEN.
(parse_login_data): "P=0" means to disable pinpad.
(check_keypad_request): Default is to use pinpad if available.
* scd/ccid-driver.c: Add 2013.
(VENDER_VEGA, VEGA_ALPHA):New.
(ccid_transceive_secure): VEGA_ALPHA is same firmware as GEMPC_PINPAD.
Change bNumberMessage to 0x01, as it works better (was: 0xff).
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
* scd/apdu.c (pcsc_no_service): Remove.
(open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove
pcsc_no_service support.
(apdu_open_reader): Remove R_NO_SERVICE.
* scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE.
* scd/command.c (reader_disabled): Remove.
(get_reader_slot): Follow the change of R_NO_SERVICE.
(open_card, cmd_serialno, scd_command_handler): Remove reader_disabled
support.
* scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE.
--
Daemon should handle all possible cases. Even if such a difficult
case like reader_disabled, it should not exit.
* scd/command.c (update_reader_status_file): Don't call
get_reader_slot.
--
This fix has a impact that the insertion of a card reader will not be
detected upon the insertion, but will be deferred until user tries to
access his card.
* scd/command.c (MAXLEN_SETDATA): New.
(cmd_setdata): Add option --append.
* g10/call-agent.c (agent_scd_pkdecrypt): Use new option for long data
* scd/app-openpgp.c (struct app_local_s): Add field manufacturer.
(app_select_openpgp): Store manufacturer.
(do_decipher): Print a note for broken cards.
--
Please note that I was not able to run a full test because I only have
broken cards (S/N < 346) available.
* scd/apdu.c (new_reader_slot): Acquire lock.
(open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, open_rapdu_reader): Release lock.
--
Fixes a test case of:
No libpcsclite1 installed.
Run gpg-agent
Run command "gpg-connect-agent learn /bye" with no card/token
Sometimes it fails: ERR 100663356 Not supported <SCD>
While it should be always: ERR 100663404 Card error <SCD>
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
Conflicts:
scd/app.c
* scd/apdu.c (apdu_connect): Do not test for zero atrlen.
--
When gpg-agent prompts for insertion of a card this error would be
returned.
Co-authored-by: Ben Kibbey <bjk@luxsci.net>
* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
* apdu.c (pcsc_keypad_verify): Have dummy Lc field with value 0.
(pcsc_keypad_modify): Likewise.
(pcsc_keypad_modify): It's only for ISO7816_CHANGE_REFERENCE_DATA.
bConfirmPIN value is determined by the parameter p0.
* app-openpgp.c (do_change_pin): The flag use_keypad should be 0 when
reset_mode is on, or resetcode is on. use_keypad only makes sense for
iso7816_change_reference_data_kp.
* iso7816.h (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* iso7816.c (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* scd/command.c (update_card_removed): Do no act on an invalid VRDR.
(do_reset): Ignore apdu_reset error codes for no and inactive card.
Close the reader before setting the slot to -1.
(update_reader_status_file): Notify the application before closing the
reader.
--
With this change the scd now works as it did in the past. In
particular there is no more endless loop trying to open the reader by
the update_reader_status_file ticker function. That bug basically
blocked all card operations until the scdaemon was killed.
* scd/apdu.c (apdu_connect): Return status codes for no card available
and inactive card.
* scd/command.c (TEST_CARD_REMOVAL): Also test for GPG_ERR_CARD_RESET.
(open_card): Map apdu_connect status to GPG_ERR_CARD_RESET.
This is not a part of pin pad support series of mine.
As I found the bug while I am preparing the patches, I report this.
As CCID protocol is little endian, wLangId of US English = 0x0409
is represented as two bytes of 0x09 then 0x04.
It is really confusing that the code like following is floating
around:
pin_verify -> wLangId = HOST_TO_CCID_16(0x0904);
But, it is 0x0409 (not 0x0904). It is defined in the documentation:
http://www.usb.org/developers/docs/USB_LANGIDs.pdf
and origin of this table is Microsoft. We can see it at:
http://msdn.microsoft.com/en-us/library/bb165625%28VS.80%29.aspx
Yes, it would be better not to hard-code 0x0409. It would be better
to try current locale of the user, or to use the first entry of string
descriptor. I don't have time to implement such a thing...
Replace gcry_md_start_debug by gcry_md_debug in all files.
* agent/gpg-agent.c (fixed_gcry_pth_init): Use only if
GCRY_THREAD_OPTION_VERSION is 0
* scd/scdaemon.c (fixed_gcry_pth_init): Ditto.
--
Libgcrypt 1.6 will have some minor API changes. In particular some
deprecated macros and functions will be removed. PTH will also be
dropped in favor of a thread model neutral locking method.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* scripts/git-hooks/commit-msg: New script.
* autogen.sh: Install commit-msg hook for git.
* doc/HACKING: Describe the ChangeLog policy.
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
From Grant Olsons's mail to gnupg-devel@:
This is three-quarters NIIBE and one-quarter me, but I though it would
be easier to have a single complete patch that applies to
STABLE-BRANCH-2-0 than two patches floating around.
This is basically NIIBE Yatuka's patch here:
http://lists.gnupg.org/pipermail/gnupg-devel/2010-November/025828.html
Plus another check that closes down the reader explicitly if we get a
SW_HOST_NO_READER error, so that an unplugged reader doesn't hold onto
the first slot, preventing us from getting to the active plugged reader.
