* g10/gpg.c (check_user_ids): Differentiate between a second result
and an error. If the key specification is ambiguous or an error
occurs, set RC appropriately.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: Werner Koch <wk@gnupg.org>
Suggested-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tofu.c (fingerprint_str): Remove.
(tofu_register): Take a public key instead of a fingerprint as arg.
Use hexfingerprint() to get a fpr from the PK.
(tofu_get_validity): Ditto.
(tofu_set_policy, tofu_get_policy): Simplify by using hexfingerprint.
* g10/trustdb.c (tdb_get_validity_core): Pass the primary key PK to
instead of the fingerprint to the tofu functions.
--
This change has the advantage that we are not bound to a specific
fingerprint length and will thus helps us to implement rfc4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (get_trust): For the UTK check lookup the key by
fingerprint.
--
Extracting the keyid form the fingerprint is not a good idea because
that only works for v4 keys. It is also better to first read the key
and then extract the keyid from the actual available key.
The entire trusted-key stuff should be reworked to make use of
fingerprints.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_ctx_s): Add field "extra_list".
(get_pubkey_byname): Store strings in the context.
(getkey_end): Free EXTRA_LIST.
--
This fixes a use-after-free bug. It showed up with:
gpg --auto-key-locate local --locate-key wk@gnupg.org
The key was shown but also all other following keys in the keyring.
Bisecting showed d47e84946ee010917cfc3501062721b74afbb771 as culprit
but the actual cause was a part of:
Regression-due-to: b06f96ba4f57f55194efcd37a0e3a2aa5450b974
Signed-off-by: Werner Koch <wk@gnupg.org>
g10/keyring.c (keyring_search): Only mark the cache as completely
filled if we start the scan from the beginning of the keyring.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Reported-by: NIIBE Yutaka <gniibe@fsij.org>
A new feature (e8c53fc) turned up a bug whereby checking if a search
term matches multiple keys in the keyring causes the cache to be
inconsistent.
When we look for a key on the keyring, we iterate over each of the
keyblocks starting with the keyblock following the last result. For
each keyblock, we iterate over the public key and any subkeys. As we
iterate over each key, we first insert it into the cache and then
check if the key matches. If so, we are done.
In pseudo code:
for (i = last_result + 1; i < num_records; i ++)
keyblock = get_keyblock (i)
for (j = 1; j < len(keyblock); j ++)
key = keyblock[j]
update_cache (key)
if (compare (key, search_terms))
return ok
cache_filled = true
return ENOFOUND
When we look for the next match, we start with the following keyblock.
The result is that any subkeys following the key that matched are not
added to the cache (in other words, when a keyblock matches, the inner
loop did not necessarily complete and the subsequent search doesn't
resume it).
This patch includes a straightforward fix: only indicate the cache as
complete if we started the scan from the beginning of the keyring and
really didn't find anything.
* g10/trustdb.c (init_trustdb): If we can't read the trust model from
the trust DB, default to TM_PGP, not TM_TOFU_PGP.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (opendbs): If the TOFU DB format is set to auto and there
is no TOFU DB, default to the flat format.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/options.h (opt): Add field only_sign_text_ids.
* g10/gpg.c (enum cmd_and_opt_values): Add value oOnlySignTextIDs.
(opts): Handle oOnlySignTextIDs.
(main): Likewise.
* g10/keyedit.c (sign_uids): If OPT.ONLY_SIGN_TEXT_IDS is set, don't
select non-text based IDs automatically.
(keyedit_menu): Adapt the prompt asking to sign all user ids according
to OPT.ONLY_SIGN_TEXT_IDS.
* doc/gpg.texi: Document the new option --only-sign-text-ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1241
Debian-bug-id: 569702
* g10/gpg.c (check_user_ids): New function.
(main): Check that any user id specifications passed to --local-user
and --remote-user correspond to exactly 1 user. Check that any user
id specifications passed to --default-key correspond to at most 1
user. Warn if any user id specifications passed to --local-user or
--default-user are possible ambiguous (are not specified by long keyid
or fingerprint).
* g10/getkey.c (parse_def_secret_key): Don't warn about possible
ambiguous key descriptions here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1128
Debian-debug-id: 544490
* g10/decrypt-data.c (decrypt_data): If OPT.UNWRAP_ENCRYPTION is set,
copy the data to the output file instead of continuing to process it.
* g10/gpg.c (enum cmd_and_opt_values): Add new value oUnwrap.
(opts): Handle oUnwrap.
(main): Likewise.
* g10/options.h (opt): Add field unwrap_encryption.
* g10/plaintext.c (handle_plaintext): Break the output file selection
functionality into ...
(get_output_file): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 1060
Debian-bug-id: 282061
* g10/tofu.c (fingerprint_str): Die with the error code returned by
the failed function.
(time_ago_str): Ditto. Do not make a comma translatable.
(fingerprint_format): Use "%zu" for a size_t.
--
Also wrapped some long strings.
In general we should not use log_fatal or use xmalloc functions but
properly return an error code and use xtrymalloc like functions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (show_statistics): Also show when the most recently
signed message was observed.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Suggested-by: MFPA <2014-667rhzu3dc-lists-groups@riseup.net>
* g10/tofu.c (show_statistics): Break the time delta to string code
into...
(time_ago_str): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (fingerprint_pp): Split this function into...
(fingerprint_str): ... this function...
(fingerprint_format): ... and this function.
(record_binding): Store the unformatted fingerprint in the DB. Only
use the formatting fingerprint when displaying a message to the user.
(get_trust): Likewise.
(show_statistics): Likewise.
(tofu_register): Likewise.
(tofu_get_validity): Likewise.
(tofu_set_policy): Likewise.
(tofu_get_policy): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/import.c (transfer_secret_keys): Return GPG_ERR_NOT_PROCESSED
when stub_key_skipped.
(import_secret_one): Notify a user, suggesting --card-status.
--
Migration to 2.1 might be confusing with smartcard. With this patch,
a user can learn to run gpg ---card-status.
Thanks to intrigeri for the report.
Debian-bug-id: 795881
* g10/sqlite.c (sqlite3_stepx): When making sure that there is no
second SQL statement, ignore newlines.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/util.h (zb32_encode): Move prototype to ...
* common/zb32.h: new. Include this for all callers of zb32_encode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (validate_keys): If tdbio_update_version_record fails,
RC does not contain the error code. Save the error code in rc2 and
use that.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.c (keydb_rebuild_caches): Only mark the cached as prepared
if it is actually prepared, which it only is if the resource is a
keybox.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sqlite.h (enum sqlite_arg_type): Add SQLITE_ARG_BLOB.
(sqlite3_stepx_callback): New declaration.
(sqlite3_stepx): Change the callback's type to sqlite3_stepx_callback,
which passes an additional parameter, the sqlite3_stmt *. Update
users.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (sqlite3_exec_printf): Move from here...
* g10/sqlite.c (sqlite3_exec_printf): ... to this new file. Don't
mark as static.
* g10/tofu.c (sqlite3_stepx): Move from here...
* g10/sqlite.c (sqlite3_stepx): ... to this new file. Don't
mark as static.
* g10/tofu.c (enum sqlite_arg_type): Move from here...
* g10/sqlite.h (enum sqlite_arg_type): ... to this new file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/mainproc.c (check_sig_and_print): Do not call the informational
get_validity if we are not going to use it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h: Add rejection_shown flag to each weakhash struct
* g10/misc.c (print_digest_algo_note, additional_weak_digest): Do not
treat MD5 separately; (print_digest_rejected_note): Use
weakhash.rejection_shown instead of static shown.
* g10/options.h (opt): Change from additional_weak_digests to
weak_digests.
* g10/sig-check.c: Do not treat MD5 separately.
* g10/gpg.c (main): Explicitly set MD5 as weak.
* g10/gpgv.c (main): Explicitly set MD5 as weak.
--
Previously, only one weak digest rejection message was shown, of
whichever was the first type encountered. This meant that if "gpg
--weak-digest SHA224" encountered both an MD5 digest and a SHA224
digest, it would only show the user that the MD5 digest was rejected.
In order to let the user know which algorithms were rejected, we
needed to move the "shown" flag into a per-weak-algorithm location.
Given this additional complication, it made no sense to continue to
treat MD5 specially, so it is added as a default weak algorithm in the
same opt.weak_digests data structure as any other.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/tofu.c: Include <sched.h>.
(batch_update_started): New variable.
(begin_transaction): If we've been in batch mode for a while, then
commit any extant batch transactions.
(tofu_begin_batch_update): If we are not in batch mode, initialize
batch_update_started.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (struct db): Rename begin_transaction to savepoint_batch.
Rename end_transaction to savepoint_batch_commit. Update users.
Remove field rollback. Add fields savepoint_inner and
savepoint_inner_commit. Add field batch_update.
(dump_cache): New function.
(batch_update): New variable.
(begin_transaction). New function.
(end_transaction): New function.
(rollback_transaction): New function.
(tofu_begin_batch_update): New function.
(tofu_end_batch_update): New function.
(closedb): End any pending batch transaction.
(closedbs): Assert that none of the DBs have a started batch
transaction if we not in batch mode.
(record_binding): Use the begin_transaction, end_transaction and
rollback_transaction functions instead of including the SQL inline.
Also start a batch mode transaction if we are using the flat format.
(tofu_register): Use the begin_transaction, end_transaction and
rollback_transaction functions instead of including the SQL inline.
* g10/gpgv.c (tofu_begin_batch_update): New function.
(tofu_end_batch_update): New function.
* g10/test-stubs.c (tofu_begin_batch_update): New function.
(tofu_end_batch_update): New function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c: Include <stdarg.h>.
(prepares_saved) [DEBUG_TOFU_CACHE]: New variable.
(queries) [DEBUG_TOFU_CACHE]: New variable.
(struct db): Add fields prevp, begin_transaction, end_transaction,
rollback, record_binding_get_old_policy, record_binding_update,
record_binding_update2, get_policy_select_policy_and_conflict,
get_trust_bindings_with_this_email, get_trust_gather_other_user_ids,
get_trust_gather_other_keys, register_already_seen, and
register_insert.
[DEBUG_TOFU_CACHE]: Add field hits.
(STRINGIFY): New macro.
(STRINGIFY2): New macro.
(enum sqlite_arg_type): New enum.
(sqlite3_stepx): New function.
(combined_db): Remove variable.
(opendb): Don't cache the combined db.
(struct dbs): New struct. Update users to use this as the head of the
local DB list rather than overloading struct db.
(unlink_db): New function.
(link_db): New function.
(db_cache): New variable.
(db_cache_count): New variable.
(DB_CACHE_ENTRIES): Define.
(getdb): If the dbs specific cache doesn't include the DB, look at
DB_CACHE. Only if that also doesn't include the DB open the
corresponding DB.
(closedb): New function.
(opendbs): Don't open the combined DB. Just return an initialized
struct dbs.
(closedbs): Don't close the dbs specific dbs. Attach them to the
front of DB_CACHE. If DB_CACHE contains more than DB_CACHE_ENTRIES,
close enough dbs from the end of the DB_CACHE list such that DB_CACHE
only contains DB_CACHE_ENTRIES. Don't directly close the dbs, instead
use the new closedb function.
[DEBUG_TOFU_CACHE]: Print out some statistics.
(record_binding): Use sqlite3_stepx instead of sqlite3_exec or
sqlite3_exec_printf.
(get_policy): Likewise.
(get_trust): Likewise.
(tofu_register): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* common/srv.c: Merge into dirmngr/dns-stuff.c. Delete file.
* common/srv.h: Merge into dirmngr/dns-stuff.h. Delete file.
* common/Makefile.am (common_sources): Remove srv.c and srv.h.
* g10/keyserver.c: Do not include srv.h. The code using it is anyway
disabled.
* dirmngr/http.c: Remove header srv.h and stubs.
* dirmngr/t-dns-stuff.c: Add option --srv.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (init_trustdb): If the saved trust model is unknown,
default to tofu+pgp instead of pgp.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/trustdb.c (validate_one_keyblock): When checking trust regular
expressions, treat the tofu+pgp trust model the same as the pgp trust
model.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (get_trust): If the policy is auto or none, check if the
key is ultimately trusted. If so, return that.
(tofu_register): If the key is ultimately trusted, don't show any
statistics.
(tofu_get_validity): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Suggested-by: Andre Heinecke <aheinecke@intevation.de>
* g10/trustdb.c (init_trustdb): Recognize tofu and tofu+pgp as
possibly saved trust models. Also register the ultimately trusted
keys if the trust model is tofu or tofu+pgp.
(check_trustdb): Don't skip if the trust model is tofu or tofu+pgp.
(update_trustdb): Likewise.
(tdb_check_trustdb_stale): Likewise.
(validate_keys): If the trust model is TOFU, just write out the
ultimately trusted keys.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (initdb): Make the version check and the database
initialization atomic.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Co-authored-by: Andre Heinecke <aheinecke@intevation.de>
* configure.ac: Add option --dsiable-tofu and --disable-sqlite.
(NEED_SQLITE_VERSION): New var.
(USE_TOFU): New ac_define and am_conditional.
* autogen.sh (build-w32): Add PKG_CONFIG_LIBDIR to configure so that
pkg-config find the correct .pc file.
* g10/Makefile.am (tofu_source): New. Build only if enabled.
* g10/gpg.c (parse_trust_model)[!USE_TOFU]: Disable tofu models.
(parse_tofu_policy)[!USE_TOFU]: Disable all.
(parse_tofu_db_format)[!USE_TOFU]: Disable all.
(main) <aTOFUPolicy>[!USE_TOFU]: Skip.
* g10/keyedit.c (show_key_with_all_names_colon)[!USE_TOFU]: Do not
call tofu functions.
* g10/keylist.c (list_keyblock_colon)[!USE_TOFU]: Ditto.
* g10/trustdb.c (tdb_get_validity_core)[!USE_TOFU]: Skip tofu
processing.
--
This allows to build a minimal version of GnuPG. It is also currently
required to build for Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (signature_stats_collect_cb): If the time_ago column is
NULL, then both time_ago and count should be 0.
(get_trust): Reverse the direction of the join so that we also get
statistics about bindings without any signatures.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (get_trust): Use the right variable to display the
conflicting key.
--
Signed-off-by: Neal H. Walfield <neal@walfield.org>
Reported-by: Andre Heinecke <aheinecke@intevation.de>
* g10/revoke.c (gen_desig_revoke): Add additional parameter ctrl.
Check that the secret key is available. If not, display an error
message.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Regression-due-to: 8459bcf9
* g10/main.h: Improve function documentation.
* g10/packet.h.h: Improve function documentation.
* g10/sig-check.c: Improve function documentation and some comments.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/misc.c (print_md5_rejected_note): Rename to ..
(print_digest_rejected_note): this. Parameterize function to take an
enum gcry_md_algos.
* g10/sig-check.c: Use print_digest_rejected_note() when rejecting
signatures.
--
76afaed65e3b0ddfa4923cb577ada43217dd4b18 allowed extra --weak-digests,
but removed the one call to print_md5_rejected_note(). This replaces
and generalizes that warning.
Signed-Off-By: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/options.h: Add additional_weak_digests linked list to opts.
* g10/main.h: Declare weakhash linked list struct and
additional_weak_digest() function to insert newly-declared weak
digests into opts.
* g10/misc.c: (additional_weak_digest): New function.
(print_digest_algo_note): Check for deprecated digests; use proper
gcry_md_algos type.
* g10/sig-check.c: (do_check): Reject weak digests in addition to MD5.
* g10/gpg.c: Add --weak-digest option to gpg.
* doc/gpg.texi: Document gpg --weak-digest option.
* g10/gpgv.c: Add --weak-digest option to gpgv.
* doc/gpgv.texi: Document gpgv --weak-digest option.
--
gpg and gpgv treat signatures made over MD5 as unreliable, unless the
user supplies --allow-weak-digests to gpg. Signatures over any other
digest are considered acceptable.
Despite SHA-1 being a mandatory-to-implement digest algorithm in RFC
4880, the collision-resistance of SHA-1 is weaker than anyone would
like it to be.
Some operators of high-value targets that depend on OpenPGP signatures
may wish to require their signers to use a stronger digest algorithm
than SHA1, even if the OpenPGP ecosystem at large cannot deprecate
SHA1 entirely today.
This changeset adds a new "--weak-digest DIGEST" option for both gpg
and gpgv, which makes it straightforward for anyone to treat any
signature or certification made over the specified digest as
unreliable.
This option can be supplied multiple times if the operator wishes to
deprecate multiple digest algorithms, and will be ignored completely
if the operator supplies --allow-weak-digests (as before).
MD5 is still always considered weak, regardless of any further
--weak-digest options supplied.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Capitialized some comments, shorted a line in do_check, and changed
subject to name the option. -wk
* g10/tofu.c (get_trust): If a conflict occurs when MAY_ASK is false,
set conflict to the key. When prompting the user, don't show the
conflicting key if the conflicting key is the current key.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/trustdb.c (tdb_get_validity_core): Silence a warning.
* g10/tofu.c (tofu_register): Move SIG_DIGEST computation to the top
so that it is not uninitialized in case of an early error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Check for sqlite3.
(SQLITE3_CFLAGS): AC_SUBST it.
(SQLITE3_LIBS): Likewise.
* g10/Makefile.am (AM_CFLAGS): Add $(SQLITE3_CFLAGS).
(gpg2_SOURCES): Add tofu.h and tofu.c.
(gpg2_LDADD): Add $(SQLITE3_LIBS).
* g10/tofu.c: New file.
* g10/tofu.h: New file.
* g10/options.h (trust_model): Define TM_TOFU and TM_TOFU_PGP.
(tofu_db_format): Define.
* g10/packet.h (PKT_signature): Add fields digest and digest_len.
* g10/gpg.c: Include "tofu.h".
(cmd_and_opt_values): Declare aTOFUPolicy, oTOFUDefaultPolicy,
oTOFUDBFormat.
(opts): Add them.
(parse_trust_model): Recognize the tofu and tofu+pgp trust models.
(parse_tofu_policy): New function.
(parse_tofu_db_format): New function.
(main): Initialize opt.tofu_default_policy and opt.tofu_db_format.
Handle aTOFUPolicy, oTOFUDefaultPolicy and oTOFUDBFormat.
* g10/mainproc.c (do_check_sig): If the signature is good, copy the
hash to SIG->DIGEST and set SIG->DIGEST_LEN appropriately.
* g10/trustdb.h (get_validity): Add arguments sig and may_ask. Update
callers.
(tdb_get_validity_core): Add arguments sig and may_ask. Update
callers.
* g10/trust.c (get_validity) Add arguments sig and may_ask. Pass them
to tdb_get_validity_core.
* g10/trustdb.c: Include "tofu.h".
(trust_model_string): Handle TM_TOFU and TM_TOFU_PGP.
(tdb_get_validity_core): Add arguments sig and may_ask. If
OPT.TRUST_MODEL is TM_TOFU or TM_TOFU_PGP, compute the TOFU trust
level. Combine it with the computed PGP trust level, if appropriate.
* g10/keyedit.c: Include "tofu.h".
(show_key_with_all_names_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/keylist.c: Include "tofu.h".
(public_key_list): Also show the PGP stats if the trust model is
TM_TOFU_PGP.
(list_keyblock_colon): If the trust mode is tofu or
tofu+pgp, then show the trust policy.
* g10/pkclist.c: Include "tofu.h".
* g10/gpgv.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* g10/test-stubs.c (get_validity): Add arguments sig and may_ask.
(enum tofu_policy): Define.
(tofu_get_policy): New stub.
(tofu_policy_str): Likewise.
* doc/DETAILS: Describe the TOFU Policy field.
* doc/gpg.texi: Document --tofu-set-policy, --trust-model=tofu,
--trust-model=tofu+pgp, --tofu-default-policy and --tofu-db-format.
* tests/openpgp/Makefile.am (TESTS): Add tofu.test.
(TEST_FILES): Add tofu-keys.asc, tofu-keys-secret.asc,
tofu-2183839A-1.txt, tofu-BC15C85A-1.txt and tofu-EE37CF96-1.txt.
(CLEANFILES): Add tofu.db.
(clean-local): Add tofu.d.
* tests/openpgp/tofu.test: New file.
* tests/openpgp/tofu-2183839A-1.txt: New file.
* tests/openpgp/tofu-BC15C85A-1.txt: New file.
* tests/openpgp/tofu-EE37CF96-1.txt: New file.
* tests/openpgp/tofu-keys.asc: New file.
* tests/openpgp/tofu-keys-secret.asc: New file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/encrypt.c (use_mdc): Make it a global func.
* g10/sign.c (sign_symencrypt_file): Use that function to decide
whether to use an MDC.
* tests/openpgp/conventional-mdc.test: Add a simple test case.
--
We used --force-mdc in sign+symenc mode (-cs) only with --force-mdc.
That broke our assumption from commit 625e292 (GnuPG 2.1.9) that all
uses of modern ciphers are using MDC.
Reported-by: Ben Kibbey <bjk@luxsci.net>
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Add field "print_dane_records".
* g10/gpg.c (oPrintDANERecords): new.
(opts): Add --print-dane-records.
(main): Set that option.
* g10/export.c (do_export): Remove EXPORT_DANE_FORMAT handling.
(do_export_stream): Add EXPORT_DANE_FORMAT handling.
* g10/keylist.c (list_keyblock_pka): Implement DANE record printing.
* g10/gpgv.c (export_pubkey_buffer): New stub.
* g10/test-stubs.c (export_pubkey_buffer): New stub.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.c (parse_rereadable_options): Do tilde expansion and
check for cert file existance in option --hkp-cacert.
--
GnuPG-bug-id: 2120
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Fail for modern messages w/o MDC.
--
This change turns the missing MDC warning into an error if the message
has been encrypted using a cipher with a non-64 bit block length cipher
and it is not Twofish.
We can assume that such messages are created by code which should have
been able to create MDC packets. AES was introduced with 1.0.3 on
2000-09-18 shortly after MDC (1.0.2 on 2000-07-12). We need to
exclude Twofish because that might have been used before MDC.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/dirmngr-conf.skel: New.
* g10/Makefile.am (EXTRA_DIST): Add file.
(install-data-local, uninstall-local): Install that file.
* g10/openfile.c (copy_options_file): Add arg "name", return a value,
simplify with xstrconcat, and factor warning message out to:
(try_make_homedir): here. Also install dirmngr.conf.
* g10/options.skel: Remove --keyserver entry.
--
The option --keyserver in gpg has been deprecated in favor of
--keyserver in dirmngr.conf. Thus we need to install a skeleton file
for dirmngr to set a default keyserver.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (print_and_check_one_sig): Add arg "extended" and
print an asterisk for the chosen selfsig.
(check_all_keysigs): Add arg "only_selfsig"
(keyedit_menu) <cmdCHECK>: Add optional arg "selfsig".
--
Using "check selfsig" prints only the self-signatures and indicates
the chosen selfsig with an asterisk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (signature_check2): Avoid copying PK to RET_PK.
Instead, directly use the provided storage. If none is provided
allocate some.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/sign.c (do_sign): Let verify signature by gpg-agent.
* agent/pksign.c (agent_pksign_do): Call gcry_pk_verify for RSA.
--
RSA signature verification should be done to prevent attacks against
RSA CRT implementations and not to return invalid signature to
adversary. Newer libgcrypt does so. For older libgcrypt and
smartcards, gpg-agent does signature verification.
* g10/call-dirmngr.c (create_context): Send option and print a verbose
error.
--
It is in general a bad idea to use honor-keyserver-url but if Dirmngr
is running in TOR mode we should not allow this option at all. We let
Dirmngr know about the use of this option and let Dirmngr tell use
whether TOR mode is active so that we can print a hint to disable that
keyserver option.
A future extension in gpgconf may disable that option directly but a
user may still override that and thus we better check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (search_skipfnc): Fix dummy argument
--
This is required due to the prototype change in
commit 9acbeac23668a1d0dabca27d7825430d76e095c2
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (keyedit_menu): When complaining that a user ID or key
must be selected, indicate what command to use to do this.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (merge_selfsigs_main): Stop looking for self-signed
data belonging to the public key when we encounter an attribute packet
or a subkey packet, not just a user id packet. When looking for
self-signed data belonging to a user id packet, stop when we see a
user attribute packet.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (skip_unusable): Also mark the key as unusable if it
has been revoked or has expired.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c: Improve documentation and comments for most
functions. Move documentation for public functions from here...
* g10/keydb.h: ... to here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (have_secret_key_with_kid): Once we find the relevent
key or subkey, stop searching.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Only a single key or subkey will ever be selected per keyblock.
* g10/getkey.c (lookup): Also don't skip legacy keys if the search
mode is KEYDB_SEARCH_MODE_NEXT.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
We currently don't skip keys if the search mode is
KEYDB_SEARCH_MODE_FIRST. Since we change KEYDB_SEARCH_MODE_FIRST to
KEYDB_SEARCH_MODE_NEXT (to avoid a reset), it only makes sense to have
the same semantics for KEYDB_SEARCH_MODE_NEXT.
* g10/keydb.h (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Update
users.
* g10/getkey.c (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Drop the
code which assumed that NAME is not NULL.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_keyblock_byfprint): Remove prototype. Replace use
of this function with get_pubkey_byfprint.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (get_pubkey_byname): If R_KEYBLOCK is not NULL, return
the keyblock in R_KEYBLOCK independent of whether PK is set or not.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Currently, no caller invokes get_pubkey_byname with PK==NULL and
R_KEYBLOCK != NULL. Thus, this change does not change any behavior.
* g10/getkey.c (get_pubkey_byname): Remove function.
(lookup): Replace use of get_pubkey_byname by get_pubkey_byfprint.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_pubkey_end): Remove declaration. Replace use of
function with getkey_end.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox-search-desc.h (struct keydb_search_desc.skipfnc): Change
third parameter to be the index of the user id packet in the keyblock
rather than the packet itself. Update users.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
The keybox code doesn't work directly with keyblocks. As such, the
matched user packet is not readily available to pass to
DESC[n].SKIPFNC. But, we do know the index of the user id packet that
matched. Thus, pass that instead. If the skip function needs the
user id packet, it can use the key id to look up the key block and
find the appropriate packet.
* g10/getkey.c (struct getkey_ctx_s): Remove field found_key.
(lookup): Add argument ret_found_key. If not NULL, set it to the
found key. Update callers.
(pk_from_block): Add argument found_key. Use it instead of
CTX->FOUND_KEY. Update callers.
(finish_lookup): Return a KBNODE (the found key) instead of an int.
Don't set CTX->FOUND_KEY. Return the found key instead.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (struct getkey_ctx_s): Remove field keyblock.
(finish_lookup): Add parameter keyblock. Update caller to pass this.
(lookup): Add new local variable keyblock. Use this instead of
ctx->keyblock for referencing the keyblock.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/test.c: Include string.h.
(prepend_srcdir): New. Taken from Libgcrypt.
(test_free): New.
* g10/t-keydb.c (do_test): Malloc the filename.
* g10/Makefile.am (AM_CPPFLAGS): Remove -DSOURCE_DIR
(EXTRA_DIST): Add t-keydb-keyring.kbx.
--
Using SOURCE_DIR should in general work but we have seen problems when
doing this in Libgcrypt. Using the srcdir variable gives us anyway
more flexibility and aligns with the way we do it in tests/openpgp.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/test.c: Include stdio.h and stdlib.h.
(verbose): New.
(print_results): Rename to exit_tests.
(main): Remove atexit and call exit_tests. Set verbose.
(ASSERT, ABORT): Call exit_tests instead of exit.
--
Calling exit from an exit handler is undefined behaviour. It works on
Linux but other systems will hit an endless loop. That is indeed
unfortunate but we can't do anything about it. Calling _exit() would
be possible but that may lead to other problems. Thus we change to
call a custom exit function :-(.
Using "make check verbose=1" is supported by tests/openpgp and thus
we add the same mechanism here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keyblock_cache): Don't declare this variable. Instead...
(struct keyblock_cache): ... turn its type into this first class
object...
(struct keydb_handle): ... and instantiate it once per database
handle. Update all users.
(keydb_rebuild_caches): Don't invalidate the keyblock cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_get_keyblock): If the iobuf_seek fails when
reading from the cache, then simply clear the cache and try reading
from the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_new): If we fail to open a keyring or keybox
correctly release all resources.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c: Improve code comments and documentation of internal
interfaces. Improve documentation of public APIs and move that to...
* g10/keydb.h: ... this file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (struct keydb_handle): Add new field is_reset.
(keydb_new): Initialize hd->is_reset to 1.
(keydb_locate_writable): Set hd->is_reset to 1.
(keydb_search): Set hd->is_reset to 0. Don't cache a key not found if
the search started from the beginning of the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_search_first): Reset the handle before starting
the search.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
This bug hasn't shown up yet in practice, because keydb_search_first
is always called immediately after a keydb_new. This changes cleans
up the semantics and will hopefully prevent future bugs.
* g10/keydb.c (struct kid_list_s): Rename from this...
(struct kid_not_found_cache_bucket): ... to this. Update users.
Remove field state.
(kid_list_t): Remove type.
(KID_NOT_FOUND_CACHE_BUCKETS): Define. Use this instead of a literal.
(kid_found_table): Rename from this...
(kid_not_found_cache_bucket): ... to this. Update users.
(kid_found_table_count): Rename from this...
(kid_not_found_cache_count): ... to this. Update users.
(kid_not_found_p): Only return whether a key with the specified key id
is definitely not in the database.
(kid_not_found_insert): Remove parameter found. Update callers.
(keydb_search): Only insert a key id in the not found cache if it is
not found. Rename local variable once_found to already_in_cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Commit e0873a33 started tracking whether key ids where definitely in
the database. This information is, however, never used and thus just
unnecessarily inflates the cache. This patch effectively reverts that
change (however, e0873a33 contains two separate changes and this only
reverts that change).
* g10/keyedit.c (sign_uids): Write an ERROR status for a signing
failure.
(menu_adduid, menu_addrevoker, menu_revsig): Ditto.
(menu_revuid, menu_revkey, menu_revsubkey): Ditto.
--
This change helps GPA to show better error messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Use an int to compare to -1. Use
buf32_to_ulong.
--
Regression-due-to: 0add91ae1ca3718e8140af09294c595f47c958d3
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Change revkey's type from a struct
revocation_key ** to a struct revocation_key *. Update users.
--
revkey was a pointer into the raw data. But, C doesn't guarantee that
there is no padding. Thus, we copy the data.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse): We don't handle copying packets with a
partial body length to an output stream. If this occurs, log an error
and abort.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (dbg_copy_all_packets): Check that OUT is not
NULL.
(copy_all_packets): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse_signature): Make sure PKTLEN doesn't
underflow. Be more careful that a read doesn't read more data than
PKTLEN says is available.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h: Add documentation for functions defined in
parse-packet.c.
* g10/parse-packet.c: Improve comments for many functions.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h (enum_sig_subpkt): Remove argument RET_N. Update
callers.
* g10/parse-packet.c (enum_sig_subpkt): Remove argument RET_N.
--
Remove the RET_N argument, because it is unused and because it is
meaningless: it's not clear whether it is an offset into SIG->HASHED
or SIG->UNHASHED.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (mpi_read): Improve documentation. Correctly
handle an EOF. On overflow, correctly return the number of bytes read
from the pipeline.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox.h (KEYBOX_WITH_X509): Do not define.
* sm/Makefile.am (AM_CPPFLAGS): Define it here.
(common_libs): Change to libkeybox509.a
* g10/Makefile.am (AM_CFLAGS): remove KSBA_CFLAGS.
(gpg2_LDADD, gpgv2_LDADD): Remove KSBA_LIBS
* kbx/Makefile.am (noinst_LIBRARIES): Add libkeybox509.a.
(libkeybox509_a_SOURCES): New.
(libkeybox_a_CFLAGS): New.
(libkeybox509_a_CFLAGS): New.
(kbxutil_CFLAGS): New.
* kbx/keybox-search.c (has_keygrip) [!KEYBOX_WITH_X509]: Declare args
as unused.
--
There is no real need to link to Libksba in gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* g10/gpg.c (main): test for --command-fd during --gen-key parse.
When --command-fd is set then imply --batch to let gpg inquire a
passphrase rather than requiring a pinentry.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_GPGVDEF): New.
* g10/keydb.c (keydb_add_resource): Take care of new flag.
* g10/gpgv.c (main): Use new flag.
--
GnuPG-bug-id: 2025
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_print): Do not print extra curve name.
--
This was cruft from the time before we changed to the new algo/size
string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_print): Change UID line indentation
* g10/mainproc.c (list_node): Ditto.
--
Due to the new keyalgo/size format the UID was not anymore printed
properly aligned to the creation date. Although we can't do that in
any case, this change does it for common algos like "rsa2048",
"dsa2048", and "ed25519".
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* g10/keydb.c (keydb_search_fpr): Skip legacy keys.
--
A test case for this problem can be found at
GnuPG-bug-id: 2031
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (lookup): Map GPG_ERR_LEGACY_KEY.
--
If an expired key is directly followed by a legacy key in the keyring,
the lookup function incorrectly returned "legacy key" instead of
"unusable key". We fix it by handling not found identical to a legacy
key if the last finish lookup failed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (sign_uids): Add arg "ctrl".
(show_key_with_all_names_colon): Ditto.
(show_key_with_all_names): Ditto.
* g10/keyedit.c (show_key_with_all_names): Print key record
indicators by checking with gpg-agent.
(show_key_with_all_names): Ditto. May now also print sec/sbb.
--
This also fixes a problem in the --with-colons mode. Before this
patch the --with-colons output of --edit-key always showed pub/sub
regardless of the old toogle state. Now it also prints sec/sbb.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (cmds): Remove helptext from "toggle".
(keyedit_menu): Remove "toggle" var and remove the sub/pub check
against toggle.
--
Because it is now easily possible to have only secret keys for some of
the main/subkeys the current check on whether any secret is available
is not really useful. A finer grained check should eventually be
implemented.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* g10/call-agent.h (struct agent_card_info_s): Add curve field.
* g10/call-agent.c (learn_status_cb): Use curve name.
* g10/card-util.c (card_status): Show pubkey name.
* scd/app-openpgp.c (struct app_local_s): Record OID and flags.
(store_fpr): Use ALGO instead of key type.
(send_key_attr): Use curve name instead of OID.
(get_public_key): Clean up by OID to curve name.
(ecc_writekey): Support any curves in libgcrypt.
(do_genkey, do_auth, ): Follow the change.
(ecc_oid): New.
(parse_algorithm_attribute): Show OID here.
* g10/card-util.c (do_change_keysize): Put "rsa".
* scd/app-openpgp.c (change_keyattr, change_keyattr_from_string):
Change the command format.
(rsa_writekey): Check key type.
(do_writekey): Remove "ecdh" and "ecdsa" support which was available
in experimental libgcrypt before 1.6.0.
* g10/getkey.c (free_akl): If AKL is NULL, just return.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Reported-by: Sami Farin.
GnuPG-bug-id: 2045
* agent/gpg-agent.c (create_server_socket): Add arg "cygwin". Call
assuan_sock_set_flag if Assuan version is recent enough.
(main): Create ssh server socket with Cygwin flag set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Make the description more accurate when
listing packets: old format packets don't support partial lengths,
only indeterminate lengths (RFC 4880, Section 4.2).
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (opts): Change arg for oDebug to a string.
(debug_flags): New; factored out from set_debug.
(set_debug): Remove "--debug-level help". Use parse_debug_flag to
print the used flags.
(main): Use parse_debug_flag for oDebug.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_s): Keep a state in the table.
(kid_not_found_table): Rename to kid_found_table.
(n_kid_not_found_table): Rename to kid_found_table_count.
(kid_not_found_p): Return found state.
(kid_not_found_insert): Add arg found.
(keydb_search): Store found state in the table.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (keylist_context): Add field good_sigs.
(list_keyblock_print): Updated good_sigs.
(print_signature_stats): Print number of good signatures and use
log_info instead of tty_printf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_t): New.
(kid_not_found_table, n_kid_not_found_table): New.
(kid_not_found_p, kid_not_found_insert, kid_not_found_flush): New.
(keydb_insert_keyblock): Flush the new cache.
(keydb_delete_keyblock): Ditto.
(keydb_update_keyblock): Ditto.
(keydb_search): Use the new cache.
(keydb_dump_stats): New.
* g10/gpg.c (g10_exit): Dump keydb stats.
--
What we do here is to keep track of key searches by long keyids (as
stored in all signatures) so that we do not need to scan the keybox
again after we already found that this keyid will result in
not-found. As soon as we change gpg to run as a co-process we should
store this table per session because other instances of gpg may have
updated the keybox without us knowing.
On a test ring with
gpg: 94721 good signatures
gpg: 6831 bad signatures
gpg: 150703 signatures not checked due to missing keys
gpg: 5 signatures not checked due to errors
gpg: keydb: kid_not_found_table: total: 14132
this new cache speeds a --check-sigs listing up from 28 minutes to
less than 3 minutes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (tdbio_read_record): Fix returning of the error.
--
Actually the returned error will anyway be GPG_ERR_TRUSTDB but the old
code was not correct.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbdump.c (list_trustdb): Add arg FP and change callers to pass
es_stdout.
* g10/tdbio.c (upd_hashtable): On a corrupted trustdb call
list_trustdb only in verbose > 1 mode and let it dump to stderr.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/signal.c: Remove.
* g10/main.h: Remove old function API.
* g10/tdbio.c: Use new API, even in the dead code.
--
We use common/signal.c now. The file g10/signal.c has been useless
since 2003-06-27. Now, the removal.
* Makefile.am: Always build kbx/
* g10/Makefile.am (AM_CFLAGS): Include KSBA_CFLAGS.
--
Note that "make check" still prints a warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (validate_keys): Call dump_key_array only in debug
mode.
--
I guess that is a left-over from an early attempt to output
information on the trustdb for use by other tools. Maybe related to
the former --list-trust-path command. Sending it to stdout is
probably useful so we do this now only in debug mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_gpg_control): Replace puts by es_fputs to
LISTFP.
--
Reported-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This was an oversight from the conversion to estream or a separate
listing stream.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_handle): Add field saved_found.
(keydb_new): Init new field.
(keydb_push_found_state, keydb_pop_found_state): New.
* g10/keyring.c (kyring_handle): Add field saved_found.
(keyring_push_found_state, keyring_pop_found_state): New.
--
We have the same feature in gpgsm. It is very useful to check for an
unambiguous user id with a follow up update of the keyblock.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (fix_keyblock): Rename to fix_key_signature_order.
(fix_keyblock): New. Call fix_key_signature_order and other fix
functions.
(keyedit_menu): Factor code out to new fix_keyblock.
(keyedit_quick_sign): Ditto. Check for primary fpr before calling
fix_keyblock.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Print either "pub" or "sub".
* g10/getkey.c (get_pubkey_byfprint): Add optional arg R_KEYBLOCK.
* g10/keyid.c (keyid_from_fingerprint): Adjust for change.
* g10/revoke.c (gen_desig_revoke): Adjust for change.
* g10/card-util.c (card_status): Simplify by using new arg. Align
card-no string.
* g10/card-util.c (card_status): Remove not used GnuPG-1 code.
--
This now prints "sub" if the first used card key is actually a subkey.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (keyinfo_status_cb): Detect KEYINFO.
--
This regression is due to
commit 585d5c62eece23911a768d97d11f159be138b13d
from February 2013!
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/free-packet.c (cmp_public_keys): Compare opaque
data at the first entry of the array when it's unknown algo.
--
(forwardported from 2.0 commit 43429c7869152f301157e4b24790b3801dce0f0a)
GnuPG-bug-id: 1962
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.h: Move to ../dirmngr/.
* common/dns-cert.c: Move to ../dirmngr/. Change args to return the
key as a buffer.
* common/t-dns-cert.c: Move to ../dirmngr/.
* common/pka.c, common/pka.h, common/t-pka.c: Remove.
* dirmngr/server.c (data_line_cookie_write): Factor code out to
data_line_write and make it a wrapper for that.
(data_line_write): New.
(cmd_dns_cert): New.
(register_commands): Register new command.
* g10/Makefile.am (LDADD): Remove DNSLIBS.
* g10/call-dirmngr.c (dns_cert_parm_s): New.
(dns_cert_data_cb, dns_cert_status_cb): New.
(gpg_dirmngr_dns_cert): New.
(gpg_dirmngr_get_pka): New.
* g10/gpgv.c (gpg_dirmngr_get_pka): New dummy function.
* g10/keyserver.c (keyserver_import_cert): Replace get_dns_cert by
gpg_dirmngr_dns_cert.
(keyserver_import_pka): Replace get_pka_info by gpg_dirmngr_get_pka.
* g10/mainproc.c: Include call-dirmngr.h.
(pka_uri_from_sig): Add CTX arg. Replace get_pka_info by
gpg_dirmngr_get_pka.
--
With this patch gpg does not do any network access itself but uses
dirmngr for that. Note that we need to keep linking to NETLIBS due to
the logging code and because we need TCP for our socket emulation
under Windows. Probably also required for Solaris etc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-dirmngr.c (dirmngr_local_s): Add field set_keyservers_done.
(create_context): Move keyserver setting to ...
(open_context): here.
(clear_context_flags): New.
(gpg_dirmngr_ks_get): Add arg override_keyserver.
* g10/keyserver.c (keyserver_refresh): Improve diagnostics.
(keyserver_get_chunk): Ditto. Pass OVERRIDE_KEYSERVER to ks_get.
--
It used to ignore the given server but showed a diagnostics that it
will be used.
* g10/options.h (KEYSERVER_HTTP_PROXY): New.
(KEYSERVER_USE_TEMP_FILES, KEYSERVER_KEEP_TEMP_FILES): Remove.
(KEYSERVER_TIMEOUT): New.
* common/keyserver.h (KEYSERVER_TIMEOUT): Remove.
* g10/keyserver.c (keyserver_opts): Remove obsolete "use-temp-files"
and "keep-temp-files". Add "http-proxy" and "timeout".
(parse_keyserver_options): Remove 1.2 compatibility option
"honor-http_proxy". Remove "use-temp-files" and "keep-temp-files"
code.
--
Note that many of these options where implicitly used by passing any
unknown option down to the former keyserver helpers. The don't exist
anymore thus we need to make them explicit. Another patch will convey
them to dirmngr. Temp files are not anymore used thus they can be
removed and will be ignored when used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/free-packet.c (my_mpi_copy): New.
(copy_public_key, copy_signature): Use instead of mpi_copy.
--
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (struct sig_stats): Rename to keylist_context and add
field check_sigs.
(keylist_context_release): New.
(list_all): Set listctx.check_sigs and call release func.
(list_one): Ditto.
(locate_one): Ditto.
(list_keyblock_print): Use .check_sigs field. Repalce arg opaque by
listctx.
(list_keyblock): Ditto. Make static.
(list_keyblock_direct): New.
* g10/keygen.c (do_generate_keypair): Replace list_keyblock by
list_keyblock_direct.
--
This is in preparation for the server mode and for a patch to speed up
--list-sigs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oDebugIOLBF): new.
(opts): Add --debug-iolbf.
(main): Set option.
--
This option is convenient for debugging to make sure that debug output
to stderr is synced with output to stdout.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (DBG_LOOKUP_VALUE): Change to 8192.
* g10/options.h (DBG_LOOKUP_VALUE, DBG_LOOKUP): New.
* g10/getkey.c: Use DBG_LOOKUP instead of DBG_CACHE at most places.
* g10/parse-packet.c (parse_key): Check PKTLEN before calling mpi_read
et al.
--
Due to the missing length checks PKTLEN may turn negative. Because
PKTLEN is an unsigned int the malloc in read_rest would try to malloc
a too large number and terminate the process with "error reading rest
of packet: Cannot allocate memory".
Reported-by: Hanno Böck.
Signed-off-by: Werner Koch <wk@gnupg.org>
g10/call-agent.h (agent_scd_learn): Add FORCE option.
g10/call-agent.c (agent_scd_learn): Implement FORCE option.
g10/keygen.c (gen_card_key): Follow the change of option.
g10/card-util.c (change_pin, card_status, factory_reset): Likewise.
g10/keyedit.c (keyedit_menu): Update private key storage by
agent_scd_learn.
--
This is not a perfect solution since there is a possibility user
unplug card before quitting 'gpg --keyedit' session. Usually,
it works well.
GnuPG-bug-id: 1846
* g10/call-dirmngr.c (record_output): New function.
(ks_put_inq_cb): Use it here to generate a --with-colons like output
instead of a custom format.
* dirmngr/ks-action.c: Include "ldap-parse-uri.h".
(ks_action_help): If the provided URI is an LDAP URI, then use
ldap_parse_uri to parse. Call ks_ldap_help.
(ks_action_search): If passed an LDAP URI, then call ks_ldap_search.
(ks_action_get): Likewise.
(ks_action_put): Likewise. Also, change data from a 'const void *' to
a 'void *' and add info and infolen parameters. Add note that
function may modify DATA.
* dirmngr/ks-action.h (ks_action_put): Update declaration accordingly.
* dirmngr/server.c: Include "ldap-parse-uri.h".
(cmd_keyserver): If ITEM->URI is an LDAP URI, parse it using
ldap_parse_uri.
(hlp_ks_put): Improve documentation.
(cmd_ks_put): Also pass info and infolen to ks_action_put. Improve
documentation.
* dirmngr/ks-engine.h (ks_ldap_help): New declaration.
(ks_ldap_search): Likewise.
(ks_ldap_get): Likewise.
(ks_ldap_put): Likewise.
* dirmngr/ks-engine-ldap.c: New file.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add ks-engine-ldap.c,
ldap-parse-uri.c and ldap-parse-uri.h.
(dirmngr_LDADD) [USE_LDAP]: Add $(ldaplibs).
--
Signed-off-by: Neal H. Walfield <neal@g10code.de>
* g10/mainproc.c (check_sig_and_print): Emit STATUS_NEWSIG.
--
gpgsm does this for a long time but somehow it never made it into gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (gpg_mpi_write): Strip leading zeroes.
--
This used not to work with opaque MPI as returned by Libgcrypt from
ECC operations. This patch fixes this.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (set_packet_list_mode): Set mpi_print_mode.
* g10/misc.c (mpi_print): Do not print an extra leading zero.
--
This was in older versions possible using "--debug 4" but that was
disabled in 2.1 due to a conflict using this values also for
Libgcrypt. Now the values are dumped either with --debug 4 or using
--list-packets along with --verbose.
Because OpenPGP only uses unsigned integers an extra leading zero will
not be printed anymore.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aPrintPKARecords): Rename to oPrintPKARecords and do not
use it as a command.
* g10/keylist.c (list_keyblock): List PKA rceords also for secret
keys.
--
An option allows to use it more flexible. For example to select only
secret keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_check_trustdb_stale): avoid log_info() when
opt.quiet
--
gpg(1) says:
-q, --quiet
Try to be as quiet as possible.
While the mentions about the stale trustdb information are edifying,
they aren't necessary, and shouldn't be emitted when the user requests
--quiet.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/dns-cert.c (get_dns_cert): Make r_key optional.
* common/pka.c: Rewrite for the new hash based lookup.
* common/t-pka.c: New.
* configure.ac: Remove option --disable-dns-pka.
(USE_DNS_PKA): Remove ac_define.
* g10/getkey.c (parse_auto_key_locate): Always include PKA.
--
Note that although PKA is now always build, it will only work if
support for looking up via DNS has not been disabled.
The new PKA only works with the IPGP DNS certtype and shall be used
only to retrieve the fingerprint and optional the key for the first
time. Due to the security problems with DNSSEC the former assumption
to validate the key using DNSSEC is not anymore justified. Instead an
additional layer (e.g. Trust-On-First-Use) needs to be implemented to
track change to the key. Having a solid way of getting a key matching
a mail address is however a must have.
More work needs to go into a redefinition of the --verify-options
pka-lookups and pka-trust-increase. The auto-key-locate mechanism
should also be able to continue key fetching with another methods once
the fingerprint has been retrieved with PKA.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/dns-cert.c (get_dns_cert): Add arg want_certtype. Change all
callers.
(CERTTYPE_): Move constants to ...
* common/dns-cert.h: here as DNS_CERTTYPE_.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mailbox.c: Move to ...
* common/mbox-util.c: new file.
* common/mbox-util.h: New. Include where needed.
* g10/t-mailbox.c: Move to ...
* common/t-mbox-util.c: new file.
--
This will make it easier to use the code by other modules in common/.
* g10/gpg.c (main): Add command --print-pka-records.
* g10/options.h (struct opt): Add field "print_pka_records".
* g10/keylist.c (list_keyblock_pka): New.
(list_keyblock): Call it if new option is set.
(print_fingerprint): Add mode 10.
--
This is a fist step towards a slightly updated PKA implementation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use log_printf instead of stderr.
* g10/tdbdump.c (export_ownertrust): Use estream fucntions.
(import_ownertrust): Ditto.
* g10/tdbio.c (tdbio_dump_record): Ditto. Change arg to estream_t.
--
Reported-by: Guilhem Moulin <guilhem@fripost.org>
Needed for unattended key edits with --status-fd, because since 2.1
status prompts are preceded by es_fflush (in cpr.c:do_get_from_fd)
not fflush(3), so the standard output may not be flushed before each
prompt. (Which breaks scripts using select(2) to multiplex between
the standard and status outputs.)
His patch only affected print_and_check_one_sig_colon() but there are
many more places where stdio and estream are mixed. This patch now
replaces most of them in g10/. At some places stdio is still used,
but that is local to a function and should not have side effects.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a38880fd8a989318585eb502582636ddd8 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyring.c (keyring_get_keyblock): Whitelist allowed packet
types.
* g10/keydb.c (parse_keyblock_image): Ditto.
--
The keyring DB code did not reject packets which don't belong into a
keyring. If for example the keyblock contains a literal data packet
it is expected that the processing code stops at the data packet and
reads from the input stream which is referenced from the data packets.
Obviously the keyring processing code does not and cannot do that.
However, when exporting this messes up the IOBUF and leads to an
invalid read of sizeof (int).
We now skip all packets which are not allowed in a keyring.
Reported-by: Hanno Böck <hanno@hboeck.de>
Test data:
gpg2 --no-default-keyring --keyring FILE --export >/dev/null
With this unpacked data for FILE:
-----BEGIN PGP ARMORED FILE-----
mI0EVNP2zQEEALvETPVDCJDBXkegF4esiV1fqlne40yJnCmJeDEJYocwFPXfFA86
sSGjInzgDbpbC9gQPwq91Qe9x3Vy81CkyVonPOejhINlzfpzqAAa3A6viJccZTwt
DJ8E/I9jg53sbYW8q+VgfLn1hlggH/XQRT0HkXMP5y9ClURYnTsNwJhXABEBAAGs
CXRlc3QgdGVzdIi5BBMBCgAjBQJU0/bNAhsDBwsJCAcDAgEGFQgCCQoLBBYCAwEC
HgECF4AACgkQlsmuCapsqYLvtQP/byY0tM0Lc3moftbHQZ2eHj9ykLjsCjeMDfPx
kZUUtUS3HQaqgZLZOeqPjM7XgGh5hJsd9pfhmRWJ0x+iGB47XQNpRTtdLBV/WMCS
l5z3uW7e9Md7QVUVuSlJnBgQHTS6EgP8JQadPkAiF+jgpJZXP+gFs2j3gobS0qUF
eyTtxs+wAgAD
=uIt9
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (write_fake_data): Take care of a NULL stored as
opaque MPI.
--
Reported-by: Hanno Böck <hanno@hboeck.de>
Test data:
gpg2 --no-default-keyring --keyring FILE --export
With this unpacked data for FILE:
-----BEGIN PGP ARMORED FILE-----
Version: GnuPG v2
Comment: Use "gpg --dearmor" for unpacking
mI0EGRkZGRkZGRkZGRkZGRkBGRkZGRkZGRkZGRkZGQAZGRkZGRkZGRkZGRkZGRkZ
GRkZInzgDbpa/9gQ4wq9////f3Vy81CkyVq3HQaqgZLZOeqPjM7XgGh5hJvAkpec
9wAAAgDHe0FVFbkppJZXP+gFs6z3gobS0qUFeyTtxs+wAgAD
=JDFT
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.w32-manifest.in: New.
* g10/gpg-w32info.rc: Add manifest.
* g10/Makefile.am (EXTRA_DIST): Add manifest.
(gpg-w32info.o): Depend on manifest.
* configure.ac (BUILD_VERSION): New.
(AC_CONFIG_FILES): Add manifest.
--
There are no dependencies yet defined - we need to do this for the
libs first.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (MAX_KEY_PACKET_LENGTH): New.
(MAX_UID_PACKET_LENGTH): New.
(MAX_COMMENT_PACKET_LENGTH): New.
(MAX_ATTR_PACKET_LENGTH): New.
(parse_key): Limit the size of a key packet to 256k.
(parse_user_id): Use macro for the packet size limit.
(parse_attribute): Ditto.
(parse_comment): Ditto.
--
Without that it is possible to force gpg to allocate large amounts of
memory by using a bad encoded MPI. This would be an too easy DoS.
Another way to mitigate would be to change the MPI read function to
allocate memory dynamically while reading the MPI. However, that
complicates and possibly slows down the code. A too large key packet
is in any case a sign for broken data and thus gpg should not use it.
Reported-by: Hanno Böck
GnuPG-bug-id: 1823
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (list_config): Replace print_sanitized_string2 by
es_write_sanitized.
* common/stringhelp.c (print_sanitized_buffer2): Remove.
(print_sanitized_buffer, print_sanitized_utf8_buffer): Remove.
(print_sanitized_utf8_buffer, print_sanitized_utf8_string): Remove.
(print_sanitized_string): Remove.
* sm/certdump.c (print_dn_part, print_dn_parts): Remove arg FP.
(pretty_print_sexp, gpgsm_print_name2, gpgsm_print_name): Remove.
--
Mixing stdio and estream is never a good idea. This fix also allows
us to remove a lot of garbage.
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
GnuPG-bug-id: 1822
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_search_first, keydb_search_next): Skip legacy
keys.
* g10/keyring.c (keyring_get_keyblock): Handle GPG_ERR_LEGACY_KEY.
(prepare_search): Ditto.
(keyring_rebuild_cache): Skip legacy keys.
* g10/keyserver.c (keyidlist): Ditto.
* g10/trustdb.c (validate_key_list): Ditto.
--
This is not the most elegant way to handle it but it reduces the
chance for unwanted side effects.
GnuPG-bug-id: 1816
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (g10_errstr): Remove macro and change all occurrences by
gpg_strerror.
(G10ERR_): Remove all macros and change all occurrences by their
GPG_ERR_ counterparts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c: Include shareddefs.h.
(quick_generate_keypair): Support static passphrase.
(get_parameter_passphrase): New.
(do_generate_keypair): Use it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Fix order of args.
--
That bug has been here since the beginning. The entire function needs
a review or be be moved to Libgcrypt.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (pct_expando): Reorder conditions for clarity.
* g10/sign.c (write_signature_packets): Fix notation data creation.
--
Also re-added the check for signature version > 3.
Reported-by: MFPA
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_learn): Add option --sendinfo.
* agent/learncard.c (agent_handle_learn): Add arg "send" andsend
certifciate only if that is set.
* g10/call-agent.c (agent_scd_learn): Use --sendinfo. Make INFO
optional.
(agent_learn): Remove.
* g10/keygen.c (gen_card_key): Replace agent_learn by agent_scd_learn.
--
The requirement of using --card-status on the first use of card on a
new box is a bit annoying but the alternative of always checking
whether a card is available before a decryption starts does not sound
promising either.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (can_handle_critical): Check content length
before calling can_handle_critical_notation.
--
The problem was found by Jan Bee and gniibe proposed the used fix.
Thanks.
This bug can't be exploited: Only if the announced length of the
notation is 21 or 32 a memcmp against fixed strings using that length
would be done. The compared data is followed by the actual signature
and thus it is highly likely that not even read of unallocated memory
will happen. Nevertheless such a bug needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Remove keyserver_options.other.
* g10/gpg.c (main): Obsolete option --honor-http-proxt.
* g10/keyserver.c (add_canonical_option): Replace by ...
(warn_kshelper_option): New.
(parse_keyserver_uri): Obsolete "x-broken-http".
--
Some of these options are deprecated for 10 years and they do not make
any sense without the keyserver helpers. For one we print a hint on
how to replace it:
gpg: keyserver option 'ca-cert-file' is obsolete; \
please use 'hkp-cacert' in dirmngr.conf
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Skip too large keys.
* kbx/keybox-file.c (IMAGELEN_LIMIT): Change limit from 2MB to 5MB.
--
The key which triggered the problem was 0x57930DAB0B86B067. With this
patch it can be imported. Keys larger than the now increased limit of
5MB will are skipped and the already existing not_imported counter is
bumped up.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/decrypt-data.c (decrypt_data): Return an error code instead of
calling BUG().
--
This code path can be triggered by fuzzing gpg and thus with some
likeness also by corrupt messages for other reasons.
* g10/parse-packet.c (dump_sig_subpkt): Print regex subpacket
sanitized.
--
We may not use "%s" to print an arbitrary buffer. At least "%.*s"
should have been used. However, it is in general preferable to escape
control characters while printf user data.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_attribute_subpkts): Check that the
attribute packet is large enough for the subpacket type.
--
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (get_parameter_algo): Map ECC algorithm strings
directly.
--
Interactive generation of the keys uses the OpenPGP algorithms numbers
but batch generation allows the use of strings.
Reported-by: Gaetan Bisson.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (stats_s): Add field v3keys.
(import): Update this field.
(import_print_stats): Print v3 key count.
(read_block): Skip v3 keys and return a count for them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (sign_file): Use DSA or ECDSA and not DSA|EdDSA.
--
This error was introduced with
commit b7f8dec6325f1c80640f878ed3080bbc194fbc78
while separating EdDSA from ECDSA.
Found due to a related bug report from Brian Minton.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (open_sigfile): Factor some code out to ...
(get_matching_datafile): new function.
* g10/plaintext.c (hash_datafiles): Do not try to find matching file
in batch mode.
* g10/mainproc.c (check_sig_and_print): Print a warning if a possibly
matching data file is not used by a standard signatures.
--
Allowing to use the abbreviated form for detached signatures is a long
standing bug which has only been noticed by the public with the
release of 2.1.0. :-(
What we do is to remove the ability to check detached signature in
--batch using the one file abbreviated mode. This should exhibit
problems in scripts which use this insecure practice. We also print a
warning if a matching data file exists but was not considered because
the detached signature was actually a standard signature:
gpgv: Good signature from "Werner Koch (dist sig)"
gpgv: WARNING: not a detached signature; \
file 'gnupg-2.1.0.tar.bz2' was NOT verified!
We can only print a warning because it is possible that a standard
signature is indeed to be verified but by coincidence a file with a
matching name is stored alongside the standard signature.
Reported-by: Simon Nicolussi (to gnupg-users on Nov 7)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/armor.c (parse_hash_header,carmor_filter): Ignore MD5 in hash
header.
(fake_packet): Remove pgp-2 workaround for white space stripping.
* g10/filter.h (armor_filter_context_t): Remove field pgp2mode.
* g10/options.h (opt): Remove field pgp2_workarounds.
* g10/gpg.c (main): Do not set this field.
* g10/gpgv.c (main): Ditto.
* g10/mainproc.c (proc_encrypted): Use SHA-1 as fallback s2k hash
algo. Using MD5 here is useless.
(proc_plaintext): Remove PGP-2 related woraround
(proc_tree): Remove another workaround but keep the one for PGP-5.
--
The removed code was either not anymore used or its use would have
caused an error message later anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_get): Factor all code out to ...
(keyserver_get_chunk): new. Extimate line length.
(keyserver_get): Split up requests into chunks.
--
Note that refreshing all keys still requires way to much memory
because we build an in-memory list of all keys first. It is required
to first get a list of all keys to avoid conflicts while updating the
key store in the process of receiving keys. A better strategy would
be a background process and tracking the last update in the key store.
GnuPG-bug-id: 1755
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_KEEP_OWNERTTRUST): New.
* g10/import.c (parse_import_options): Add "keep-ownertrust".
(import_one): Act upon new option.
--
This option is in particular useful to convert from a pubring.gpg to
the new pubring.kbx in GnuPG 2.1 or vice versa:
gpg1 --export | gpg2 --import-options keep-ownertrust --import
