* g10/gpg.c (main): Remove note about rfc4880bis.
* g10/keygen.c (keygen_set_std_prefs): Use only OCB in the AEAD
preference list.
--
It is more than unlikely that EAX will ever be used in practice and
thus we remove it from the preference list.
* g10/misc.c (openpgp_cipher_algo_mode_name): New.
* g10/decrypt-data.c (decrypt_data): Use function here.
--
Note that openpgp_cipher_algo_mode_name is different from the version
2.2 becuase we append ".CFB" here.
Without this change we would see
gpg: cipher algorithm 'AES256' may not be used in
--compliance=de-vs mode
This is confusing because AES256 is compliant. Now we see
gpg: cipher algorithm 'AES256.OCB' may not be used in
--compliance=de-vs mode
which gives a hint on the problem.
* g10/decrypt-data.c (decrypt_data): Add arg compliance_error. Adjust
all callers. Fail on compliance error only in --require-compliance
mode. Make sure to return an error if the buffer is missing; actually
that should be an assert.
* g10/mainproc.c (proc_encrypted): Delay printing of the compliance
mode status. Consult the compliance error now returned by
decrypt_data.
--
The actual case here is that we fail hard if a message has been AEAD
encrypted with one AEAD capable key and also with one passphrase. In
general the preference system takes care of not using AEAD if one
recipient's key does not support it. However, if the sender uses her
own AEAD-capable key _and_ a passphrase the message will be AEAD
encrypted. This change allows to decrypt that anyway along with a
warning message.
Note that this does currently not work in 2.3 due to a non-compliant
libgcrypt. We will however, backport this to 2.2.
* g10/sign.c (sign_symencrypt_file): Insert correct version and AEAD
information into symkey packet.
--
GnuPG-bug-id: 5856
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
* g10/options.h (opt): Add field flags.require_compliance.
* g10/gpg.c (oRequireCompliance): New.
(opts): Add --require-compliance.
(main): Set option.
* g10/mainproc.c (proc_encrypted): Emit error if non de-vs compliant.
(check_sig_and_print): Ditto.
* g10/encrypt.c (encrypt_crypt): Ditto.
--
Note that in the --encrypt and --verify cased other checks may kick in
earlier than this new --require-compliance controlled one.
* common/iobuf.c (filter_flush): Remove "src_len == 0" check.
* g10/compress-bz2.c (do_compress): Exit early if flush not
forced and input length is zero.
* g10/compress.c (do_compress): Likewise.
--
Remove "(src_len == 0)" check in filter_flush which was
introduced to fix compress failure caused by zero length
flush from iobuf_close. However this check broke enarmoring
file with length of zero. Patch instead fixes zero length
flush problem in compress filters.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_hash): Add faster path for encrypting directly
from input buffer instead of memcpying then encrypting inplace.
--
When encrypting with AES256.OCB on AMD Ryzen 5800X, memcpy shows as
taking largest portion of computation time. Patch adds fast path for
AEAD encryption which largely eliminates need for memcpying when
doing AEAD encryption. AES256.OCB throughput increases from 2.2GB/s
to 4.2GB/s on said system (1.9x faster).
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/decrypt-data.c (decrypt_data): Disable estream buffering for
output file.
--
Here estream is filled with iobuf_copy which already uses large buffers
so additional buffering in estream was just adding memory copy overhead.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/plaintext.c (handle_plaintext): Disable estream buffering in
binary modes.
--
Since in binary mode, large buffers are passed from source iobuf to
target estream, extra buffering in estream only causes extra memory
copying and overhead.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* common/iobuf.c (iobuf_copy): Use iobuf buffer size for temporary
buffers.
* g10/plaintext.c (handle_plaintext, do_hash): Likewise.
* g10/sign.c (sign_file): Likewise.
--
As iobuf will have zerocopy operation for read/write, it is better to
use same size buffers as iobuf for temporary copy buffers.
GnuPG-bug-id: T5828
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/sign.c (sign_file): Use iobuf_read instead of iobuf_get for
reading data from detached file.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up detached signing.
Detached signing speed on AMD Ryzen 5800X (4.3GiB file, SHA256):
gpg process
user time
before: 3.951s
after: 1.898s (2.0x faster)
GnuPG-bug-id: T5826
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/plaintext.c (do_hash): Use iobuf_read instead of iobuf_get for
reading data; Use gcry_md_write instead of gcry_md_putc for hash data.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up detached signature verifying.
Detached verifying speed on AMD Ryzen 5800X (4.3GiB file, SHA256):
gpg process
user time
before: 9.410s
after: 1.913s (4.9x faster)
GnuPG-bug-id: T5826
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/mainproc.c (proc_tree): Call ask_for_detached_datafile
with MD2=NULL.
--
Here, c->mfx.md2 is always NULL, in fact. But, text-wise
(when searching the use of "mfx.md2"), before the change, it used
mfx.md2, which is irrelevant in the handling of PKT_ONEPASS_SIG.
Note that: One-Pass Signature is not available in PGP2.
This fix removes (text-wise) unmatch of the calls of functions
hash_datafile_by_fd hash_datafiles, and ask_for_detached_datafile.
Fixes-commit: 88a916cdd4
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_mdc'.
(release_list): Clear 'seen_pkt_encrypted_mdc'.
(proc_encrypted): Set 'seen_pkt_encrypted_mdc'.
(have_seen_pkt_encrypted_aead): Rename to...
(have_seen_pkt_encrypted_aead_or_mdc): ...this and add check for
'seen_pkt_encrypted_mdc'.
(proc_plaintext): Do not enable extra hash contexts when decrypting
MDC input.
--
Avoiding extra hash contexts speeds up CFB/MDC decryption quite
a lot. For example, decrypting symmetric-key AES-256 encrypted
4 GiB file from RAM to /dev/null sees ~3.4x speed increase on
AMD Ryzen 5800X:
AES256.CFB encryption: 783 MB/s
AES256.CFB decryption: 386 MB/s (before)
AES256.CFB encryption: 1.3 GB/s (after patch)
Note, AEAD is still significantly faster:
AES256.OCB encryption: 2.2 GB/s
AES256.OCB decryption: 3.0 GB/s
GnuPG-bug-id: T5820
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): Use PRIu64.
* g10/decrypt-data.c (aead_underflow): Likewise.
--
Even among LP64 data model machines, uint64_t type may differ;
unsigned long or unsigned long long.
Only portable way is use of PRIu64.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/filter.h (armor_filter_context_t): New fields dearmor_mode and
dearmor_state.
* g10/dearmor.c (dearmor_file): Set dearmor_mode.
* g10/armor.c (is_armor_header): Magic to switch to generic dearmor
mode.
(parse_header_line): Treat non OpenPGP armor in a special way.
(check_input): Ditto.
(radix64_read): Detect non OpenPGP armor END lines.
* g10/call-agent.c (learn_status_cb): Parse APPVERSION.
* g10/call-agent.h (struct agent_card_info_s): Add field appversion.
* g10/card-util.c (print_a_version): New.
(current_card_status): Print version from appversion.
--
This is a regression due to the PIV support. Note that the newer
gpg-card worked correctly.
GnuPG-bug-id: 5787
* g10/keygen.c (generate_subkeypair): On error, write error and
"key not created" message to status interface.
--
This change allows users of the status/command interface to detect
errors when adding a subkey to a key. Similar status messages are
output by do_generate_keypair.
GnuPG-bug-id: 5771
* g10/keygen.c (ask_algo): Request keygrip via cpr_get.
* doc/help.txt (gpg.keygen.keygrip): New help text.
--
This change makes it possible to add an existing (sub)key to
another key via the status/command interface.
GnuPG-bug-id: 5771
* g10/pkglue.c (sexp_extract_param_sos_nlz): New.
* g10/pkglue.h: Add the declaration.
* g10/sign.c (do_sign): Use sexp_extract_param_sos_nlz for Ed25519.
--
Ed25519 signature in GnuPG 2.2 has no leading zeros.
GnuPG-bug-id: 5331
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/export.c (key_to_sshblob): Use put_membuf with length counted
beforehand, and use memcmp instead of strncmp.
--
GnuPG-bug-id: 5393
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oForbidGenKey, opts): New option.
(mopt): New local struct
(gen_key_forbidden): New.
(main): Set and handle the option.
--
In large system installation it is sometimes useful to make it a bit
harder for users to generate their own keys. An example is a policy
to not use on-disk keys.
--
The last key is new. As usual the key is on a dedicated card with the
Admin PIN accessible to a few core hackers.
# ------------------------ >8 ------------------------
pub rsa3072 2017-03-17 [SC] [expires: 2027-03-15]
5B80C5754298F0CB55D8ED6ABCEF7E294B092E28
sig R BCEF7E294B092E28 2017-03-17 Andre Heinecke (Release Signing Key)
uid Andre Heinecke (Release Signing Key)
sig 3 BCEF7E294B092E28 2017-03-17 Andre Heinecke (Release Signing Key)
sig 1FDF723CF462B6B1 2017-03-17 Andre Heinecke <aheinecke@intevation.de>
pub ed25519 2020-08-24 [SC] [expires: 2030-06-30]
6DAA6E64A76D2840571B4902528897B826403ADA
uid Werner Koch (dist signing 2020)
sig 3 528897B826403ADA 2020-08-24 Werner Koch (dist signing 2020)
sig 249B39D24F25E3B6 2020-08-24 Werner Koch (dist sig)
sig 63113AE866587D0A 2020-08-24 wk@gnupg.org
sig E3FDFF218E45B72B 2020-08-24 Werner Koch (wheatstone commit signing)
sig F2AD85AC1E42B367 2020-08-24 Werner Koch <wk@gnupg.org>
pub ed25519 2021-05-19 [SC] [expires: 2027-04-04]
AC8E115BF73E2D8D47FA9908E98E9B2D19C6C8BD
uid Niibe Yutaka (GnuPG Release Key)
sig 3 E98E9B2D19C6C8BD 2021-05-19 Niibe Yutaka (GnuPG Release Key)
sig 00B45EBD4CA7BABE 2021-09-14 NIIBE Yutaka <gniibe@fsij.org>
sig E267B052364F028D 2021-09-14 NIIBE Yutaka <gniibe@fsij.org>
pub brainpoolP256r1 2021-10-15 [SC] [expires: 2029-12-31]
02F38DFF731FF97CB039A1DA549E695E905BA208
uid GnuPG.com (Release Signing Key 2021)
sig 3 549E695E905BA208 2021-10-15 GnuPG.com (Release Signing Key 2021)
sig 528897B826403ADA 2021-10-15 Werner Koch (dist signing 2020)
sig E3FDFF218E45B72B 2021-10-15 Werner Koch (wheatstone commit signing)
* g10/tdbdump.c (export_ownertrust): Skip records marked with the
option --trusted-key.
(import_ownertrust): Clear the trusted-key flag.
* g10/tdbio.h (struct trust_record): Add field flags.
* g10/tdbio.c (tdbio_dump_record): Improve output.
(tdbio_read_record, tdbio_write_record): Handle flags.
* g10/trustdb.c (verify_own_keys): Clear stale trusted-keys and set
the flag for new --trusted-keys.
(tdb_update_ownertrust): Add arg as_trusted_key. Update callers.
--
GnuPG-bug-id: 5685
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_revocation_key): Store the fingerprint length in
created structure.
--
GnuPG-bug-id: 5393
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
* g10/gpg.c (oOverrideComplianceCheck): New.
(opts): Add new option.
(main): Set option and add check for batch mode.
* g10/options.h (opt): Add flags.override_compliance_check.
* g10/sig-check.c (check_signature2): Factor complaince checking out
to ...
(check_key_verify_compliance): this. Turn error into a warning in
override mode.
--
There is one important use case for this: For systems configured
globally to use de-vs mode, Ed25519 and other key types are not
allowed because they are not listred in the BSI algorithm catalog.
Now, our release signing keys happen to be Ed25519 and thus we need to
offer a way for users to check new versions even if the system is in
de-vs mode. This does on purpose not work in --batch mode so that
scripted solutions won't accidently pass a signature check.
GnuPG-bug-id: 5655
--
This is per OpenPGP WG design team decision from 2021-08-13
(raising a new wall after exactly 60 years ;-)
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Fix the condition to report
NO_SECKEY even when the key was not considered by get_session_key.
--
GnuPG-bug-id: 5562
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Werner Koch