* tools/gpgtar-create.c (global_header_count): new.
(myreadlink): New.
(build_header): New arg r_exthdr. Detect and store long file and link
names. Factor checkum computation out to ...
(compute_checksum): new.
(add_extended_header_record): New.
(write_extended_header): New.
(write_file): Write extended header.
--
GnuPG-bug-id: 5754
* tools/gpgconf-comp.c (list_one_option): Skip ignored options and set
the no_change flag for forced options.
(retrieve_options_from_program): Put the attributes into the option
table.
--
* tools/gpgconf.c (my_copy_file): Add arg LISTP and record certain
things.
(show_configs_one_file): New arg LISTP to be passed thru.
(show_configs): Show envars and regisiry values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aShowConfigs): New.
(opts): Add --show-configs.
(CUTLINE_FMT): New.
(show_version_gnupg): Add arg "prefix" and adjust caller.
(my_copy_file): New.
(show_configs_one_file): New.New.
(show_configs): New.
(main): Call show_configs.
--
The ability to have a consolidated list of all config files is very
useful for support cases. This is in particular important due to the
global config files and their conditional constructs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (known_options_gpg): Add "keyserver".
--
This allows Kleopatra to read and change the keyserver that is used
by gpg if the deprecated keyserver option in gpg.conf is set.
GnuPG-bug-id: 5462
* common/i18n.c (i18n_init): Use gnupg_localedir() instead of LOCALEDIR.
(i18n_localegettext): Ditto.
* tools/gpgconf-comp.c (my_dgettext): Ditto.
--
On Unix, gnupg_localedir() returns the locale directory relative to
the root directory of the gnupg installation if specified in the
gpgconf.ctl. Otherwise, it returns the built-in LOCALEDIR.
GnuPG-bug-id: 5999
* common/recsel.c (recsel_parse_expr): Add flag -t.
* common/stringhelp.c: Remove assert.h.
(strtokenize): Factor code out to do_strtokenize.
(strtokenize_nt): New.
(do_strtokenize): Add arg trim to support the strtokenize_nt.
* common/t-stringhelp.c (test_strtokenize_nt): New test cases.
* tools/wks-util.c (wks_list_key): Use strtokenize_nt and the recsel
flag -t.
--
This fixes a bug with user ids with leading spaces because:
wks-client lists all mail addresses from the key and matches them to the
requested mail address.
If there are several user-ids all with the same mail address
wks-client picks one of them and then extracts exactly that user id.
However, here it does not match by the mail address but by the full
user-id so that we can be sure that there will be only one user-id in
the final key.
The filter built expression unfortunately strips leading blanks but
requires a verbatim match. Thus it won't find the user id again and
errors out.
The new -t flag and a non-trimming strtokenize solves the problem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oCheckSymPassphrasePattern): New.
(opts): Add --check-sym-passphrase-pattern.
(parse_rereadable_options): Set option.
(main): Return option info.
* tools/gpgconf-comp.c: Add new option.
* agent/agent.h (opt): Add var check_sym_passphrase_pattern.
(struct pin_entry_info_s): Add var constraints_flags.
(CHECK_CONSTRAINTS_NOT_EMPTY): New to replace a hardwired 1.
(CHECK_CONSTRAINTS_NEW_SYMKEY): New.
* agent/genkey.c (check_passphrase_pattern): Rename to ...
(do_check_passphrase_pattern): this to make code reading
easier. Handle the --check-sym-passphrase-pattern option.
(check_passphrase_constraints): Replace arg no_empty by a generic
flags arg. Also handle --check-sym-passphrase-pattern here.
* agent/command.c (cmd_get_passphrase): In --newsymkey mode pass
CHECK_CONSTRAINTS_NEW_SYMKEY flag.
* agent/call-pinentry.c (struct entry_parm_s): Add constraints_flags.
(struct inq_cb_parm_s): New.
(inq_cb): Use new struct for parameter passing. Pass flags to teh
constraints checking.
(do_getpin): Pass constraints flag down.
(agent_askpin): Take constrainst flag from the supplied pinentry
struct.
--
Requirements for a passphrase to protect a private key and for a
passphrase used for symmetric encryption are different. Thus a
the use of a different pattern file will be useful. Note that a
pattern file can be used to replace the other passphrase constraints
options and thus we don't need to duplicate them for symmetric
encryption.
GnuPG-bug-id: 5517
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (is_gnupg_default_homedir): Use standard_homedir
instead of the constant which makes a difference on Windows.
(_gnupg_socketdir_internal) [W32]: Move the directory to LOCAL_APPDATA.
(gnupg_cachedir): Remove unsued function.
* common/sysutils.c (gnupg_rmdir): New.
* tools/gpgconf.c (main): s/rmdir/gnupg_rmdir/.
--
That is actually a more correct directory than APPDATA. This fixes
a problem with installations where the APPDATA is non a network drive
and the resulting socket filename is truncated in our socket helper
function (because we use sockaddr also for our local socket
emulation on Windows).
LOCAL_APPDATA is expected to be on the local box and thus in the
majority of cases the resulting socket file name will be short enough.
GnuPG-bug-id: 5537
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_HEADERS): Remove string.h and getopt.h.
* dirmngr/ks-engine-ldap.c: Remove including getopt.h.
* tools/make-dns-cert.c: Likewise.
--
Checking string.h is supported by AC_HEADER_STDC. Use of getopt.h
is only needed for getopt_long of GNU extention.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-check-pattern.c: Major rewrite.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Here is a simple pattern file:
====================
# Pattern to reject passwords which do not comply to
# - at least 1 uppercase letter
# - at least 1 lowercase letter
# - at least one number
# - at least one special character
# and a few extra things to show the reject mode
# Reject is the default mode, ignore case is the default
#[reject]
#[icase]
# If the password starts with "foo" (case insensitive) it is rejected.
/foo.*/
[case]
# If the password starts with "bar" (case sensitive) it is rejected.
/bar.*/
# Switch to accept mode: Only if all patterns up to the next "accept"
# or "reject" tag or EOF match, the password is accepted. Otherwise
# the password is rejected.
[accept]
/[A-Z]+/
/[a-z]+/
/[0-9]+/
/[^A-Za-z0-9]+/
=================
Someone™ please write regression tests.
* tools/gpgtar-create.c (fillup_entry_w32): Move parentheses.
--
Fixes-commit: 8b8925a2bd
The bug is so obvious that I wonder why it was not reported more often
on Windows. (Adding 1 to MAXDWORD (0xfffffff) always gives 0 for the
product).
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_readkey): Add arg create_shadow.
* tools/gpg-card.c (list_one_kinfo): Add arg create_shadow and pass it
down to scd-readkey. Change all callers to convey this arg.
(cmd_list): Add option --shadow.
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* tools/gpgconf-comp.c (known_pseudo_options_gpg): Add
"compliance_de_vs".
* g10/gpg.c (gpgconf_list): Returh that pseudo option.
--
Of course this will always return false for this version of gnupg.
But as soon as this version has been approved we have everything ready
for a runtime check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c (cmd_list): Add flag --reread.
* tools/card-call-scd.c (scd_learn): New arg reread.
* tools/card-call-scd.c (release_card_info): Fix releasing of the new
label var.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.h (struct key_info_s): Add field 'label'.
* tools/card-call-scd.c (learn_status_cb): Parse KEY-LABEL.
(scd_learn): Always request KEY-LABEL.
* tools/gpg-card.c (nullnone): New.
(list_one_kinfo, list_card): Use it. Print the label.
--
PKCS#15 defines label which help to understand for what a key is
intended. Print them.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_check_options): Increase array.
--
I missed to fix that one with the last patch.
Note that there was no problem in 2.2 at thismlocation - probably
because it had been manually backported once.
GnuPG-bug-id: 5366
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (known_options_gpg, known_options_gpgsm): No
flags needed for pseudo options.
(known_pseudo_options_gpg, known_pseudo_options_gpgsm): New.
(gc_component): Add field known_pseudo_options.
(struct read_line_wrapper_parm_s): New.
(read_line_wrapper): New.
(retrieve_options_from_program): Use read_line_wrapper to handle
pseudo options.
--
GnuPG-bug-id: 5341
Due to reading the list of options from the argparser of the
component, we had no more information about the pseudo options and
thus could not emit them. Well, there is just one pseudo option right
now, but with this change we have a generalized concept for them:
Pseudo options are used to convey information from a component to
gpgconf; for example build-in values.
* tools/gpg-card.c (cmd_writecert): Allow the other key references.
(cmd_readcert): Ditto.
--
See previous commit for testing info.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tpm2d: New directory.
* Makefile.am (SUBDIRS): Add directory.
* configure.ac: Detect libtss and decide whether to build tpm2d.
* am/cmacros.am: Add a define.
* util.h (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* common/homedir.c (gnupg_module_name): Add tpm2d.
* common/mapstrings.c (macros): Add "TPM2DAEMON".
* tools/gpgconf.h (GC_COMPONENT_TPM2DAEMON): New.
* tools/gpgconf-comp.c (known_options_tpm2daemon): New.
(gc_component): Add TPM2.
(tpm2daemon_runtime_change): New.
* tpm2d/Makefile.am: New.
* tpm2d/command.c: New.
* tpm2d/ibm-tss.h: New.
* tpm2d/tpm2.c: New.
* tpm2d/tpm2.h: New.
* tpm2d/tpm2daemon.c: New.
* tpm2d/tpm2daemon.h: New.
---
This commit adds and plumbs in a tpm2daemon to the build to mirror the
operation of scdaemon. The architecture of the code is that
tpm2daemon.c itself is pretty much a clone of scd/scdaemon.c just with
updated function prefixes (this argues there could be some further
consolidation of the daemon handling code). Note that although this
commit causes the daemon to be built and installed, nothing actually
starts it or uses it yet.
Command handling
----------------
command.c is copied from the command handler in scd.c except that the
command implementation is now done in terms of tpm2 commands and the
wire protocol is far simpler. The tpm2daemon only responds to 4
commands
IMPORT: import a standard s-expression private key and export it to
TPM2 format. This conversion cannot be undone and the
private key now can *only* be used by the TPM2. To anyone
who gets hold of the private key now, it's just an
encrypted binary blob.
PKSIGN: create a signature from the tpm2 key. The TPM2 form private
key is retrieved by KEYDATA and the hash to be signed by
EXTRA. Note there is no hash specifier because the tpm2
tss deduces the hash type from the length of the EXTRA
data. This is actually a limitation of the tpm2 command
API and it will be interesting to see how this fares if the
tpm2 ever supports say sha3-256 hashes.
PKDECRYPT: decrypt (RSA case) or derive (ECC case) a symmetric key.
The tpm2 for private key is retrieved by KEYDATA and the
information used to create the symmetric key by EXTRA.
KILLTPM2D: stop the daemon
All the tpm2 primitives used by command.c are in tpm2.h and all the
tpm2 specific gunk is confined to tpm2.c, which is the only piece of
this that actually does calls into the tss library.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Changes from James' patch:
- gpgconf: The displayed name is "TPM" and not "TPM2". That
string is used by GUIs and should be something the user
understands. For example we also use "network" instead
of "Dirmngr".
- Removed some commented includes.
- Use 16 as emulation of GPG_ERR_SOURCE_TPM2.
- Silenced a C90 compiler warning and flags unused parameters.
- Removed "if HAVE_LIBS" from tpm2/Makefile.am and add missing
files so that make distcheck works.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
