* g10/options.h (opt): Add flags.dummy_outfile.
* g10/decrypt.c (decrypt_message): Set this global flag instead of the
fucntion local flag.
* g10/plaintext.c (get_output_file): Ignore opt.output if that was
used as a dummy option aslong with --use-embedded-filename.
--
The problem here was that an explicit specified --decrypt, as
meanwhile suggested, did not work with that dangerous
--use-embedded-filename. In contrast it worked when gpg decrypted as
a side-effect of parsing the data.
GnuPG-bug-id: 4500
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/exec.c (w32_system): Add "!ShellExecute" special.
* g10/photoid.c (get_default_photo_command): Use the new ShellExecute
under Windows and fallbac to 'display' and 'xdg-open' in the Unix
case.
(show_photos): Flush stdout so that the output is shown before the
image pops up.
--
For Unix this basically syncs the code with what we have in gpg 1.4.
Note that xdg-open may not be used when running as root which we
support here.
For Windows we now use ShellExecute as this seems to be preferred over
"cmd /c start"; however this does not solve the actual problem we had
in the bug report. To solve that problem we resort to a wait
parameter which defaults to 400ms. This works on my Windows-10
virtualized test box. If we can figure out which simple viewers are
commonly installed on Windows we should enhance this patch to test for
them.
GnuPG-bug-id: 4334
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search.c (keybox_search): We need to seek to the last
position in all cases not just when doing a NEXT.
--
This is because search from the beginning needs a keybox_search_reset.
We can only make an exception for KEYDB_SEARCH_MODE_FIRST..
Fixes-commit: 49b236af0e
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (struct card_key_info_s): New.
(divert_pksign, divert_pkdecrypt): New API.
* agent/call-scd.c (card_keyinfo_cb): New.
(agent_card_free_keyinfo, agent_card_keyinfo): New.
* agent/divert-scd.c (ask_for_card): Having GRIP argument,
ask scdaemon with agent_card_keyinfo.
(divert_pksign, divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Supply GRIP.
* agent/pksign.c (agent_pksign_do): Ditto.
--
We are going to relax the requirment for SERIALNO of card. It's OK,
when a card doesn't have recorded SERIALNO. If a card has a key
with GRIP, it can be used.
GnuPG-bug-id: 2291, 4301
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/export.c (cleartext_secret_key_to_openpgp): ignore trailing
sublists in private-key S-expression.
--
When gpg-agent learns about a private key from its ssh-agent
interface, it stores its S-expression with the comment attached. The
export mechanism for OpenPGP keys already in cleartext was too brittle
because it would choke on these comments. This change lets it ignore
any additional trailing sublists.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gnupg-Bug-Id: 4490
* kbx/keybox-init.c (keybox_lock) [W32]: Use _keybox_close_file
instead of fclose so that a close is done if the file is opened by
another handle.
* kbx/keybox-search.c (keybox_search): Remember the last offset and
use that in NEXT search mode if we had to re-open the file.
--
GnuPG-bug-id: 4505
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-init.c (keybox_lock): New arg TIMEOUT. Change all
callers to pass -1 when locking.
* sm/keydb.c (struct resource_item): Remove LOCKANDLE.
(struct keydb_handle): Add KEEP_LOCK.
(keydb_add_resource): Use keybox locking instead of a separate dotlock
for testing whether we can run a compress.
(keydb_release): Reset KEEP_LOCK.
(keydb_lock): Set KEEP_LOCK.
(unlock_all): Take care of KEEP_LOCK.
(lock_all): Use keybox_lock instead of dotlock fucntions.
(keydb_delete): Remove arg UNLOCK.
* sm/delete.c (delete_one): Adjust keydb_delete. Due to the KEEP_LOCK
the keydb_release takes care of unlocking.
--
This aligns the code more with g10/keydb.c and avoids the separate
calls to dotlock_take.
GnuPG-bug-id: 4505
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (agent_public_key_from_file): pass size_t as int to
gcry_sexp_build_array's %b.
--
This is only a problem on big-endian systems where size_t is not the
same size as an int. It was causing failures on debian's s390x,
powerpc64, and sparc64 platforms.
There may well be other failures with %b on those platforms in the
codebase, and it probably needs an audit.
Once you have a key in private-keys-v1.d/$KEYGRIP.key with a comment
or a uri of reasonable length associated with it, this fix can be
tested with:
gpg-agent --server <<<"READKEY $KEYGRIP"
On the failing platforms, the printed comment will be of length 0.
Gnupg-bug-id: 4501
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keyserver.c (keyserver_search): Remove a specialized error
message.
--
Dirmngr comes with a default keyserver and the suggestion to use
gpg --keyserver
is not good because that option is deprecated. An error message
"No keyserver available" is sufficient.
GnuPG-bug-id: 4512
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (update_keysig_packet): Convert digest algo when needed.
--
Several gpg commands try to keep most properties of a key signature
when updating (i.e. creating a new version of a key signature). This
included the use of the current hash-algorithm. This patch changes
this so that SHA-1 or RMD160 are replaced by SHA-256 if
possible (i.e. for RSA signatures). Affected commands are for example
--quick-set-expire and --quick-set-primary-uid.
GnuPG-bug-id: 4508
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (make_keysig_packet): Remove obsolete arg diegst_algo
which was always passed as 0. Change all callers.
* g10/gpgcompose.c (signature): Warn when trying to set a digest algo.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* m4/iconv.m4: Update from gettext 0.20.1.
--
This includes fixes of file descriptor leaks.
GnuPG-bug-id: 4504
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/findkey.c (has_comment_expando): New.
(agent_key_from_file): Modify DESC_TEXT.
--
A Label entry in the keyfile is always set manually and thus we can
assume that the user wants to have this label in the prompt. In case
the prompt template does not demand a comment this patch appends a
comment to thhe template. This is a common case for on-disk keys used
by gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (linefeed_to_percent0A): New.
(read_key_file): Add optional arg 'keymeta' and change all callers.
(agent_key_from_file): Prefer "Label:" over the comment for protected
keys.
--
If in the extended key format an item
Label: This is my key
is found, "This is my key" will be displayed instead of the comment
intially recorded in the s-expression. This is pretty useful for the
ssh keys because often there is only the original file name recorded
in the comment.
If no Label is found or it is empty the S-expression comment is used.
To show more than one line, the standard name-value syntax can be
used, for example:
Label: The Ssh key
<blank line>
<space>I registered on fencepost.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_pksign, cmd_pkauth, cmd_pkdecrypt): When length
of keyidstr is 40, it is considered as a keygrip for direct use.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/findkey.c (write_extended_private_key): Add args serialno and
keyref. Write a Token line if that does not yet exist.
(agent_write_private_key): Add args serialno and keyref and change all
callers.
(agent_write_shadow_key): Skip leading spaces.
* agent/keyformat.txt: Improve extended key format docs.
--
Noet that the extended key forma is the defaqult in 2.3. This patch
is a first step to better handle tokens which carray the same key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/name-value.c (nvc_write): Take care of Key. Factor some code
out to ...
(write_one_entry): new.
--
The key item is in general not manual editable thus we put it at the
end of a file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_signature): Take only rthe addrspec from a
Signer's UID subpacket.
--
This is to address a problem in the currentr OpenKeychain which put
the entire UID into the subpacket. For example our Tofu code can only
use the addrspec and not the entire UID.
Reported-by: Wiktor Kwapisiewicz <wiktor@metacode.biz>
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (opts): New options --authenticode and --attribute.
* sm/gpgsm.h (opt): Add vars authenticode and attribute_list.
* sm/sign.c (add_signed_attribute): New but inactive.
(gpgsm_sign): Use new options.
--
Because libksba 1.4 is not yet ready the new code is not yet active.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exechelp-w32.c (gnupg_spawn_process_detached): Add
CREATE_BREAKAWAY_FROM_JOB creation flag if required.
--
When the gpg process is assigned to a W32 "Job" the
child processes are killed once the Job is finished.
As we want our detached processes to linger e.g.
gpg-agent the breakaway flag is required in
that case.
GnuPG-Bug-Id: T4333
Thanks to Jan Echternach for reporting this and providing
a patch.
Signed-off-by: Andre Heinecke <aheinecke@gnupg.org>
* scd/app-common.h (struct app_ctx_s): Add with_keygrip function.
* scd/app-openpgp.c (do_with_keygrip): New.
* scd/app.c (app_do_with_keygrip): New.
* scd/command.c (cmd_keyinfo): New.
(send_keyinfo): New.
--
KEYGRIP_ACTION_LOOKUP is not yet used. It will be used for directly
asking PK* action to determine an APP.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (struct app_local_s): Add keygrip_str.
(store_keygrip): New.
(read_public_key): Call store_keygrip to hold keygrip.
(get_public_key): Likewise.
(send_keypair_info): Use stored keygrip_str.
(check_keyidstr): Allow use of KEYGRIP.
(do_check_pin): Allow use of KEYGRIP of signing slot.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf-comp.cb (gc_options_dirmngr): correct capitalization
of Tor.
--
https://www.torproject.org/docs/faq.html.en#WhyCalledTor says:
> Note: even though it originally came from an acronym, Tor is not
> spelled "TOR". Only the first letter is capitalized. In fact, we can
> usually spot people who haven't read any of our website (and have
> instead learned everything they know about Tor from news articles) by
> the fact that they spell it wrong.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/getkey.c (get_best_pubkey_byname): Set new.uid always
to NULL after use.
--
pubkey_cmp is not guranteed to set new.uid.
So if the diff < 0 case is reached best is set to new.
If then diff > 0 is reached without modifying new.uid
e.g. if the key has no matching mboxes. new.uid is
free'd even though the uid is still referenced in
best.
GnuPG-Bug-Id: T4462
* g10/objcache.c: New.
* g10/objcache.h: New.
* g10/Makefile.am (common_source): Add them.
* g10/gpg.c: Include objcache.h.
(g10_exit): Call objcache_dump_stats.
* g10/getkey.c: Include objcache.h.
(get_primary_uid, release_keyid_list): Remove.
(cache_user_id): Remove.
(finish_lookup): Call the new cache_put_keyblock instead of
cache_user_id.
(get_user_id_string): Remove code for mode 2.
(get_user_id): Implement using cache_get_uid_bykid.
--
This generic caching module is better than the ad-hoc code we used in
getkey.c. More cleanup in getkey is still required but it is a
start. There is also a small performance increase with the new cache:
With a large keyring and --list-sigs I get these numbers:
| | before | after |
|------+------------+------------|
| real | 14m1.028s | 12m16.186s |
| user | 2m18.484s | 1m36.040s |
| sys | 11m42.420s | 10m40.044s |
Note the speedup in the user time which is due to the improved cache
algorithm. This is obvious, because the old cache was just a long
linked list; the new cache are two hash tables.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_public_key): Add fields fpr and fprlen.
* g10/keyid.c (do_fingerprint_md): Remove.
(compute_fingerprint): New.
(keyid_from_pk): Simplify.
(fingerprint_from_pk): Simplify.
(hexfingerprint): Avoid using extra array.
--
This is similar to what we are doing with the keyid for a long time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_wkd): Clear NO_ARMOR.
--
We may even adjust the specs to allow that. It should not be a
problem for any OpenPGP implementation because armored keys are very
common and de-armoring code is de-facto a mandatory feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Limit the number of considered keys to 5.
(import_one): Return the first fingerprint in case of WKD.
--
The Web Key Directory should carry only one key. However, some
providers like to put old or expired keys also into the WKD. I don't
thunk that this is a good idea but I heard claims that this is needed
for them to migrate existing key data bases.
This patch puts a limit on 5 on it (we had none right now) and also
fixes the issue that gpg could not work immediately with the requested
key because the code uses the fingerprint of the key to use the
imported key. Now the first key is used. On a second try (w/o
accessing the WKD) the regular key selection mechanism would be in
effect. I think this is the most conservative approach. Let's see
whether it helps.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (struct keyid_list): Add field fprlen.
(cache_user_id): Set and test it.
(get_user_id_byfpr): Make static, add arg fprlen and use it.
(get_user_id_byfpr_native): Add arg fprlen and change all callers.
--
This was a regression in the 2.3 base.
GnuPG-bug-id: 3801
Signed-off-by: Werner Koch <wk@gnupg.org>
Werner Koch