* configure.ac: Detect TPM emulator and enable tests.
* tests/tpm2dtests/: New test suite.
* tests/Makefile.am: Run tests.
--
Add a set of tests that exercise tpm2daemon handling of keys and
verify compatibility with non-tpm based keys.
Running this test infrastructure requires a tpm emulator, which is
tested for during configuration. If an emulator is not found, the
tests won't be run since they require the presence of a TPM (although
the TPM handling code will still be built).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
- Fixed tests/Makefile.am for make distcheck.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: New option --allow-old-cipher-algos.
(set_compliance_option): Set --rfc4880bis explictly to SHA256 and
AES256. Allow old cipher algos for OpenPGP, rfc4880, and rfc2440.
* g10/options.h (opt): Add flags.allow_old_cipher_algos.
* g10/misc.c (print_sha1_keysig_rejected_note): Always print the note
unless in --quiet mode.
* g10/encrypt.c (setup_symkey): Disallow by default algos with a
blocklengt < 128.
(encrypt_crypt): Ditto. Fallback by default to AES instead of 3DES.
* g10/pkclist.c (algo_available): Take care of old cipher also.
(select_algo_from_prefs): Use AES as implicit algorithm by default.
* tests/openpgp/defs.scm (create-gpghome): Set allow-old-cipher-algos.
--
GnuPG-bug-id: 3415
* tests/openpgp/all-tests.scm (all-tests): Replace extended-key-format
mode with a new keyboxd mode.
* tests/openpgp/defs.scm (create-gpghome): Ditto.
* tests/openpgp/gpgv.scm: Adjust for keyboxd mode.
* tests/openpgp/issue2419.scm: Fix to allow setting a log-file into
gpg.conf for debugging.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm (pipe:gpg): Remove stray dash.
--
The extra dash is problematic at export and import because this does
not export a single key as intended by the tests but does two key
lookups where the second fails because that userid is always "-". For
the current keyring and keybox code this does not matter because it is
ignored. The keyboxd code however is more picky and returns an error.
Fixes-commit: 9609cb20e4caee739b9fc4fd36797029d2970041
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Take care: Running under valgrind takes loooong and in some case you
may run into an valgrind internal error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/main.c: Switch to the new option parser.
* common/argparse.c, common/argparse.h: Remove.
* common/init.c (_init_common_subsystems): Do not call obsolete func.
* common/Makefile.am (common_sources): Remove those files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gpgscm/scheme.c (gc_reservation_failure): Fix adding ";".
[!NDEBUG] (scheme_init_custom_alloc): Don't init seserved_lineno.
--
Picked from libgpg-error commit of:
8a9397896fd202dcfb3fb46259e43bc05a0ddd2e
In some build environment, NDEBUG is defined (although it's
bad practice). This change supports such a situation.
GnuPG-bug-id: 3959
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm: Add "disable-scdaemon". Remove
"scdaemon-program".
* tests/gpgme/gpgme-defs.scm, tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/inittests, tests/pkits/inittests: Add "disable-scdaemon"
--
Before this change, running "make check" accesses USB device by
scdaemon on host computer. If there is any smartcard/token available,
it may affect test results. Because default key choice depends on
smartcard/token availability now and existing tests have nothing about
testing smartcard/token, disabling scdaemon is good.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/scheme.c (CASE): Use unused attribute for GCC > 6.
(FALLTHROUGH): New for fallthrough.
(Eval_Cycle): Use FALLTHROUGH. Remove not-needed comment of
fallthrough.
--
Since GCC combines C preprocessor macro expansion, the fallthrough
comment doesn't work well to suppress warnings for
-Wimplicit-fallthrough, near the macro CASE. To handle this
problem, we use GCC's extension of unused label and fallthrough
attributes.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/gnupg.scm (with-ephemeral-home-directory): Add
teadown-fn.
* tests/gpgsm/export.scm: Use -no-atexit version and stop-agent.
* tests/openpgp/decrypt-session-key.scm: Likewise.
* tests/openpgp/decrypt-unwrap-verify.scm: Likewise.
* tests/openpgp/defs.scm (have-opt-always-trust): Likewise.
(setup-environment-no-atexit): New.
(start-agent): Support no use of atexit.
* tests/gpgsm/gpgsm-defs.scm (setup-gpgsm-environment-no-atexit): New.
* tests/migrations/common.scm (untar-armored): Follow the change
of with-ephemeral-home-directory.
--
When gpg-agent detects homedir removal, it will automatically exit.
Then, call of 'gpgconf --kill all' will fail. So, stop-agent should
be called before the removal of homedir.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (opts): Add new option.
(opt_set_iobuf_size): New var.
(set_debug): Set the option.
* tests/openpgp/armor.scm: Use this option to revert the buffer size
to the one which used to exhibit the tested bugs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/Makefile.am [DISABLE_REGEX] (EXTRA_DIST, XTESTS):
Conditionalize.
* tests/openpgp/all-tests.scm (all-tests): Input file is Makefile.
--
The feature is only valid with !DISABLE_REGEX.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Add trust-pgp-4.scm.
(EXTRA_DIST): Remove the test file from EXTRA_DIST.
--
Now that issue 2923 is fixed, the trust-pgp-4 test passes as
expected and we can enable it again. That should help prevent
a future regression on this issue.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/defs.scm (create-gpghome): Add s2k-count.
--
My tests show only 2.5% improvement, but as we have that option now
let's use it.
real 9m12.604s
user 2m20.720s
sys 0m11.452s
real 8m3.815s
user 2m16.700s
sys 0m11.544s
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_scd): Support !BUILD_WITH_SCDAEMON.
* tests/openpgp/defs.scm (create-gpghome): Likewise.
* tests/gpgsm/gpgsm-defs.scm (create-gpgsmhome): Likewise.
--
We could modify gpg-agent to remove all support of scdaemon, with no
inclusion of call-scd.c, divert-scd.c, and learncard.c, but it would
not be worth to do that.
GnuPG-bug-id: 3316
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/quick-key-manipulation.scm: Fix expiration time
comparison.
--
This is a bug fix for Amelia Earhart who is probably in UTC-12.
When expiration date is specified, GnuPG interprets it as noon of the
date in local time.
Before this fix, the test compared the value by 2145916800 which is
2038-01-01 00:00:00 in UTC with allowance of 1 day. When the test
was ran in UTC-12 timezone, it failed because of noon in the timezone
is midnight of the next day in UTC.
GnuPG-bug-id: 3393
Reported-by: Daniel Kahn Gillmor
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/quick-key-manipulation.scm: Fix expiration time
comparison.
--
This is a bug fix for Amelia Earhart who is probably in UTC-12.
When expiration date is specified, GnuPG interprets it as noon of the
date in local time.
Before this fix, the test compared the value by 2145916800 which is
2038-01-01 00:00:00 in UTC with allowance of 1 day. When the test
was ran in UTC-12 timezone, it failed because of noon in the timezone
is midnight of the next day in UTC.
GnuPG-bug-id: 3393
Reported-by: Daniel Kahn Gillmor
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/Makefile.am (XTESTS): Remove test.
(EXTRA_DIST): Add test file.
--
There are two problems with this test: First a syntax error in the
file name so that the test was not used at all. Second the test
currently returns FAIL.
Fixes-commit: c23a69970ba38edae9d3b2603825d18fbb732423
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/trust-pgp-1.scm: New file.
* tests/openpgp/trust-pgp-2.scm: New file.
* tests/openpgp/trust-pgp-3.scm: New file.
* tests/openpgp/trust-pgp-4.scm: New file.
* tests/openpgp/trust-pgp/common.scm: New file.
* tests/openpgp/trust-pgp/scenario1.asc: New file.
* tests/openpgp/trust-pgp/scenario2.asc: New file.
* tests/openpgp/trust-pgp/scenario3.asc: New file.
* tests/openpgp/trust-pgp/scenario4.asc: New file.
* tests/openpgp/trust-pgp/alice.sec.asc: New file.
* tests/openpgp/trust-pgp/bobby.sec.asc: New file.
* tests/openpgp/trust-pgp/carol.sec.asc: New file.
* tests/openpgp/trust-pgp/david.sec.asc: New file.
* tests/openpgp/trust-pgp/frank.sec.asc: New file.
* tests/openpgp/trust-pgp/grace.sec.asc: New file.
* tests/openpgp/trust-pgp/heidi.sec.asc: New file.
* tests/openpgp/Makefile.am (XTESTS): Add new tests.
(TEST_FILES): Add new files.
(EXTRA_DIST): Add new common file.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/openpgp/tofu.scm (gettrust): Moved to the common defs.scm
module.
(checktrust): Likewise.
* tests/openpgp/defs.scm (gettrust): New function.
(checktrust): Likewise.
--
These functions will be re-used by the tests for the PGP trust
model.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* tests/gpgscm/scheme.c (CASE): Rearrange so that the case statement
is at the front.
(Eval_Cycle): Improve fallthrough annotations.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/README: Add quickstart instructions, how to use
shell.scm, remove no longer used MKDATA.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: New option --enable-all-tests.
* tests/gpgscm/ffi.c (ffi_init): New gloabl var *run-all-tests*.
* tests/openpgp/all-tests.scm (all-tests): Use that var instead
of *maintainer-mode*.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Add --enable-all-tests.
--
It is better to have a separate option to run all tests than to put
this on top of --enable-maintainer-mode. This way we can also make
sure to run all tests during "make distcheck".
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/tests.scm (test-pool): Add delimiter lines.
--
This is to make those summaries a bit more simlar to those from
automake.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Leak the maintainer mode flag into 'config.h'.
* tests/gpgscm/ffi.c: Pass it into the scheme environment.
* tests/openpgp/all-tests.scm: Only run tests against non-default
configurations (keyring, extended-key-format) in maintainer mode.
--
Werner is concerned that the tests do take up too much time and asked
me to reduce the runtime of the tests for normal users.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (create-file): Unlink file first.
* tests/openpgp/shell.scm: Ask whether to import legacy test keys or
not, and whether to drop 'batch' from the configuration. Add paths to
all the programs to 'PATH'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/repl.scm (prompt-yes-no?): New function.
* tests/gpgscm/tests.scm (pathsep-split): Likewise.
(pathsep-join): Likewise.
(with-path): Use the new function.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/init.scm (throw'): Make it impossible to catch
'*interpreter-exit*'. This fixes 'exit' (and with it 'fail') inside
'catch' statements.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/Makefile.am (XTESTS): Add the new test.
* tests/openpgp/gpgv.scm: New file.
* tests/openpgp/signed-messages.scm: Likewise.
* tests/openpgp/verify.scm: Move the signed messages to the new file
and load it.
Signed-off-by: Justus Winter <justus@g10code.com>
* ffi.c (do_wait_processes): Suppress the timeout error.
* tests.scm (semaphore): New definition.
(test-pool): Only run a bounded number of tests in parallel.
(test::started?): New function.
(run-tests-parallel): Do not report results, do not start the tests.
(run-tests-sequential): Adapt.
(run-tests): Parse the number of parallel jobs.
--
This change limits the number of tests that are run in parallel. This
way we do not overwhelm the operating systems' scheduler. As a
side-effect, we also get more accurate runtime information, and it
will be easy to implement timeouts on top of this.
Use TESTFLAGS to limit the number of jobs:
$ make check-all TESTFLAGS=--parallel=16
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/all-tests.scm: Generalize a bit, and also add a
variant that uses the new extended key format.
* tests/openpgp/defs.scm (create-gpghome): Conditionally enable the
new extended key format.
Signed-off-by: Justus Winter <justus@g10code.com>
Replace mentions of bugs.gnupg.org with https://dev.gnupg.org/. Since
the project has transitioned to a better workflow for supporting
contributions, we should ensure that our documentation points to the
right place.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tests/openpgp/defs.scm (start-agent,stop-agent): Use gpg-conf which
will properly use the '--build-prefix' argument to make gpgconf use
tools from the build directory.
GnuPG-bug-id: 3165
Fixes-commit: 2c9d9ac55ea455a5ec26428989dced0311ed46cc
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgme/gpgme-defs.scm: Use the scdaemon from the build tree
when writing a 'gpg-agent.conf'.
* tests/gpgsm/gpgsm-defs.scm: Likewise.
* tests/openpgp/defs.scm: Likewise.
--
As of 97a2394ecafaa6f58e4a1f70ecfd04408dc15606 gpg may query the
scdaemon for a signing key to use. To make sure that the agent calls
the right scdaemon, we provide the path explicitly in the
'gpg-agent.conf' that is used in the tests, similar to what we do for
the agent itself and the pinentry.
GnuPG-bug-id: 3165
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/all-tests.scm: Run each test twice, once with public
keys stored in a keybox, once with a keyring.
* tests/openpgp/defs.scm (create-gpghome): Create a public keyring to
make GnuPG use that instead of creating a keybox if '--use-keyring' is
given.
* tests/openpgp/setup.scm: Fix flag handling and usage.
--
This parametrizes the OpenPGP tests. With this change, the test suite
is able to detect problems with the keyring store, e.g. like the one
fixed in 22739433e98be80e46fe7d01d52a9627c1aebaae.
GnuPG-bug-id: 3080
Signed-off-by: Justus Winter <justus@g10code.com>
* Makefile.am (TESTS_ENVIRONMENT): New variable.
(check-all): New phony target to run all tests.
* tests/gpgme/gpgme-defs.scm (have-gpgme?): New function that tests
whether the GPGME test suite is available instead of exiting the
process.
* tests/gpgscm/init.scm (export): New macro.
* tests/gpgscm/tests.scm (run-tests): New function.
(load-tests): Likewise.
* tests/gpgme/run-tests.scm: Simplify and move the parsing of the list
of tests to 'all-tests.scm'.
* tests/gpgsm/run-tests.scm: Likewise.
* tests/migrations/run-tests.scm: Likewise.
* tests/openpgp/run-tests.scm: Likewise.
* tests/gpgme/Makefile.am: To select the tests to run, use the
variable 'TESTS'. This harmonizes the interface with the automake
test suite.
* tests/gpgsm/Makefile.am: Likewise.
* tests/migrations/Makefile.am: Likewise.
* tests/openpgp/Makefile.am: Likewise.
* tests/openpgp/README: Likewise.
* agent/all-tests.scm: New file.
* common/all-tests.scm: Likewise.
* g10/all-tests.scm: Likewise.
* g13/all-tests.scm: Likewise.
* tests/gpgme/all-tests.scm: Likewise.
* tests/gpgsm/all-tests.scm: Likewise.
* tests/migrations/all-tests.scm: Likewise.
* tests/openpgp/all-tests.scm: Likewise.
* tests/run-tests.scm: Likewise.
--
This change allows us to run all tests in parallel and write one XML
report capturing the results of every test. It also lays the
foundation to parametrize test suites.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (test-pool): Rework reporting. Filter using
the computed test status instead of the return value. Also print the
new categories 'failed expectedly' and 'passed unexpectedly'.
(test): If a test ends with a bang (!), it is expected to fail. Adapt
status, status-string, and xml accordingly.
--
Allow tests to be marked as being expected to fail by appending a bang
(!) to the tests name. If such a test fails, it will not be counted
as failure, but will still be prominently displayed in the report. If
it succeeds unexpectedly, this is counted as a failure.
Fixes T3134.
GnuPG-bug-id: 3134
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (struct scheme): New field
'frame_freelist'.
* tests/gpgscm/scheme.c (enum scheme_types): New type 'T_FRAME'.
(type_to_string): Handle new type.
(settype): New macro.
(gc_disable): Make sure there is at least one frame in the free list.
(mark): Handle frame objects.
(finalize_cell): Likewise.
(dump_stack_initialize): Initialize free list.
(dump_stack_free): Simplify.
(frame_length): New variable.
(dump_stack_make_frame): New function.
(frame_slots): Likewise.
(frame_payload): New macro.
(dump_stack_allocate_frame): New function.
(dump_stack_deallocate_frame): Likewise.
(dump_stack_preallocate_frame): Likewise.
(_s_return): Unpack frame object and deallocate it.
(s_save): Wrap state in an frame object.
(dump_stack_mark): Mark the free list.
--
TinySCHEME being a SECD-machine needs to push frames onto the dump
stack. Previously, the dump stack was a list. This required four
cells for the spine, as well as up to one additional cell to encode
the current opcode. This was quite inefficient despite the fact that
we recovered the spine as well as the integer cell.
We introduce frame objects, which are a special variant of vectors of
length four. Since the length is fixed, this frees up the length
field of the vector object to store the unboxed opcode. A frame
object now fits in two cells.
Saving two or three cells is a mere byproduct, the performance gain
comes from increased locality, unboxed opcode representation, and the
ability to easily put the objects in a free list, keeping the garbage
collector out of the continuous motion of the virtual machine.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (struct scheme): Remove field 'op'.
* tests/gpgscm/scheme.c (opexe_0): Inline into 'Eval_Cycle'.
(_Error_1): Return the opcode to evaluate next.
(Error_1): Do not return, but set the opcode and goto dispatch.
(Error_0): Likewise.
(s_goto): Likewise.
(s_return): Likewise.
(s_return_enable_gc): Likewise.
(s_thread_to): Remove superfluous cast.
(_s_return): Return the opcode to evaluate next.
(scheme_init_custom_alloc): Adapt to removal of field 'op'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgme/gpgme-defs.scm (python): Fix Python detection.
--
In 25e6444b3f4601c7821beab06bc4520deacb007b we changed the way GPGME
creates the build directory for the Python bindings. We now use the
basename of the interpreter as an identifier, that means we have to
get the base name right, a link to the same binary is not sufficient.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (finalize_cell): Use switch, return whether
the cell may be freed.
(gc): Update callsite.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/init.scm (throw'): If the first argument to the error
is a string, display it as such.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (call-with-io): When being verbose, include
the pid in the output, and avoid duplicating the command arguments.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (test-pool, tests): Previously, these methods
updated objects by creating new updated copies of the object being
manipulated. This made the code awkward without any benefit,
therefore I change it to just update the object.
Signed-off-by: Justus Winter <justus@g10code.com>
--
Locate every resource and every script used in the tests using a path
relative to the top of the source tree.
This is a purely mechanical change, mostly done using regular
expressions, with a few manual fixups here and there.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (CELL_MINRECOVER): New macro.
* tests/gpgscm/scheme.c (_get_cell): Move the heuristic to get more
cells...
(gc): ... here where every caller benefits from the optimization.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (have-opt-always-trust): Execute in empty
ephemeral home directory. This prevents gpg from picking up the
configuration from the current gnupghome (if any).
* tests/migrations/common.scm (untar-armored): Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (with-home-directory,
with-ephemeral-home-directory): Move...
* tests/gpgscm/gnupg.scm: ... to this new file.
* tests/gpgscm/main.c (main): Load the new file.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_0): Consider 'op', not 'sc->op'. The
former is the opcode we are currently executing.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/main.c (load): Try to mmap the script.
* tests/gpgscm/scheme.c (scheme_load_memory): New function, a
generalization of 'scheme_load_string'.
* tests/gpgscm/scheme.h (scheme_load_memory): New prototype.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (op_code_info): Fix type, add forward
declaration.
(check_arguments): New function.
(Eval_cycle): Use the new function.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/opdefines.h: Make tags mandatory.
* tests/gpgscm/scheme.c: Likewise.
* tests/gpgscm/scheme.h: Likewise.
--
Tags provide a constant-time lookup mechanism for almost every object.
This is useful for the interpreter itself, and the code for tags is
tiny.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_6): Merge into 'opexe_0'.
* tests/gpgscm/opdefines.h: Adapt.
--
Having separate functions to execute opcodes reduces our ability to
thread the code and prevents the dispatch_table from being moved to
rodata.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_5): Merge into 'opexe_0'.
* tests/gpgscm/opdefines.h: Adapt.
--
Having separate functions to execute opcodes reduces our ability to
thread the code and prevents the dispatch_table from being moved to
rodata.
Signed-off-by: Justus Winter <justus@g10code.com>
