* common/compliance.h (PK_ALGO_FLAG_RSAPSS): New.
* common/compliance.c (gnupg_pk_is_compliant): Add arg alog_flags and
test rsaPSS. Adjust all callers.
(gnupg_pk_is_allowed): Ditto.
* sm/misc.c (gpgsm_ksba_cms_get_sig_val): New wrapper function.
(gpgsm_get_hash_algo_from_sigval): New.
* sm/certcheck.c (gpgsm_check_cms_signature): Change type of sigval
arg. Add arg pkalgoflags. Use the PK_ALGO_FLAG_RSAPSS.
* sm/verify.c (gpgsm_verify): Use the new wrapper and new fucntion to
also get the algo flags. Pass algo flags along.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certdump.c: Include membuf.h.
(gpgsm_print_serial_decimal): New.
* sm/keylist.c (list_cert_raw): Print s/n also in decimal
(list_cert_std): Ditto.
--
Many CA's print the serial number in decimal on their cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certdump.c (gpgsm_get_serial): New.
* sm/certcheck.c (gpgsm_check_cert_sig): Support EdDSA signatures.
--
Note that this does not work with the self-signed RFC-8410 sample
certificate; see the code for comments.
The Ed488 case has not been tested due to a lack of support in
Libgcrypt.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (struct certlist_s): Add helper field pk_algo.
* sm/sign.c (gpgsm_sign): Store the public key algo. Take the hash
algo from the curve. Improve diagnostic output in verbose mode.
--
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/decrypt.c (ecdh_decrypt): Support
dhSinglePass-stdDH-sha1kdf-scheme. Factor key derive code out to ...
(ecdh_derive_kek): new global function. Allow for hashs shorter than
the key.
(hash_ecc_cms_shared_info): Make file-only.
* sm/encrypt.c (ecdh_encrypt): Replace derive code by a call to the
new ecdh_derive_kek. Add test code to create data using
dhSinglePass-stdDH-sha1kdf-scheme.
* sm/gpgsm.h (opt): Add member force_ecdh_sha1kdf.
* sm/gpgsm.c: Add option --debug-force-ecdh-sha1kdf.
--
I did some test against
Governikus_Signer: 2.9.2.0
MCard security Provider: 2.4.0
Algorithm catalog from: 05.12.2019
using a Signature Card v2.0 and a nistp256 certificate. Encrypting
with Governikus used the stdDH-sha1kdf scheme which we can now
decrypt. Encrypting with GPGSM uses for that curve the recommended
scheme sha256kdf but Governikus was not able to decrypt this (no
usable error message). Encrypting using stdDH-sha1kdf with GPGSM by
using the new --debug-force-ecdh-sha1kdf option showed that
Governikus was able to decrypt this.
FWIW: RFC5753 (Use of Elliptic Curve Cryptography (ECC) Algorithms)
has this requirement:
Implementations that support EnvelopedData with the
ephemeral-static ECDH standard primitive:
- MUST support the dhSinglePass-stdDH-sha256kdf-scheme key
agreement algorithm, the id-aes128-wrap key wrap algorithm, and
the id-aes128-cbc content encryption algorithm; and
which Governikus seems not to fulfill.
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/fingerprint.c (gpgsm_get_key_algo_info): Factor code out to ...
(gpgsm_get_key_algo_info2): new.
(gpgsm_pubkey_algo_string): New.
* sm/keylist.c (list_cert_colon): Put curve into field 17
(list_cert_raw): Print the unified key algotithm string instead of the
algo and size.
(list_cert_std): Ditto.
--
It is important to known whether a 256 bit ECC uses a NIST or a
Brainpool curve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/decrypt.c (hash_ecc_cms_shared_info): Make global.
* sm/encrypt.c (ecdh_encrypt): New.
(encrypt_dek): Add arg PK_ALGO and support ECDH.
(gpgsm_encrypt): Pass PK_ALGO.
--
Note: This has only been tested with a messages created and decrypted
by GnuPG.
GnuPG-bug-id: 4098
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/call-dirmngr.c (gpgsm_dirmngr_lookup): Add optional arg URL and
adjust all callers.
* sm/certchain.c (oidstr_caIssuers): New.
(struct find_up_store_certs_s): Add additional fields.
(find_up_store_certs_cb): Store the fingerprint.
(find_up_via_auth_info_access): New.
(find_up): Try the AIA URI first.
--
Note that --auto-issuer-key-retrieve is required to use that.
GnuPG-bug-id: 4898
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certchain.c (is_cert_still_valid): Shortcut if tehre is no DP.
* common/audit.c (proc_type_verify): Print "n/a" if a cert has no
distribution point.
* sm/gpgsm.h (opt): Add field enable_issuer_based_crl_check.
* sm/gpgsm.c (oEnableIssuerBasedCRLCheck): New.
(opts): Add option --enable-issuer-based-crl-check.
(main): Set option.
--
If the issuer does not provide a DP and the user wants such an issuer,
we expect that a certificate does not need revocation checks. The new
option --enable-issuer-based-crl-check can be used to revert to the
old behaviour which requires that a suitable LDAP server has been
configured to lookup a CRL by issuer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87a9f793a106095e3838eb71825189d7)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (struct server_control_s): Add field 'current_time'.
* sm/certchain.c (find_up_search_by_keyid): Detect a corner case.
Also simplify by using ref-ed cert objects in place of an anyfound
var.
--
See the code for a description of the problem. Tested using the certs
from the bug report and various command lines
gpgsm --faked-system-time=XXXX --disable-crl-checks \
-ea -v --debug x509 -r 0x95599828
with XXXX being 20190230T000000 -> target cert too young
with XXXX being 20190330T000000 -> okay
with XXXX being 20190830T000000 -> okay, using the long term cert
with XXXX being 20220330T000000 -> target cert expired
The --disabled-crl-checks option is required because in our a simple
test setting dirmngr does not know about the faked time.
GnuPG-bug-id: 4696
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (struct keyserver_spec): Add field use_ldaps.
* sm/gpgsm.c (parse_keyserver_line): Parse flags.
* sm/call-dirmngr.c (prepare_dirmngr): Send ldaps flag to the dirmngr.
* dirmngr/dirmngr.h (struct ldap_server_s): Add field use_ldaps.
* dirmngr/ldapserver.c (ldapserver_parse_one): Parse flags.
* dirmngr/ldap.c (start_cert_fetch_ldap): Call wrapper with --tls.
* dirmngr/dirmngr_ldap.c: New option --tls.
(fetch_ldap): Make use of that option.
--
There was no way to specify an LDAPS server in
dirmngr_ldapserver.socnf or with gpgsm's --keyserver option. This
patch fixes this. Eventually we should allow to replace host and port
by a partial URI in the same way ldap_initialize does it. For backward
compatibility we do not yet do that.
Although the dirmngr code accepts an URL (eg. taken from a
certificate), I can't see how the scheme was ever used. Thus the
patch also detects an ldaps scheme and uses this. That part has not
been tested, though.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certlist.c (cert_usage_p): Add arg 'silent' and change all
callers.
(gpgsm_cert_use_sign_p): Add arg 'silent' and pass to cert_usage_p.
Change all callers.
* sm/sign.c (gpgsm_get_default_cert): Set SILENT when calling
gpgsm_cert_use_sign_p
--
GnuPG-bug-id: 4535
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (opts): New options --authenticode and --attribute.
* sm/gpgsm.h (opt): Add vars authenticode and attribute_list.
* sm/sign.c (add_signed_attribute): New but inactive.
(gpgsm_sign): Use new options.
--
Because libksba 1.4 is not yet ready the new code is not yet active.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* g10/options.h (struct opt): Add field request_origin.
* g10/call-agent.c (start_agent): Send option to the agent.
* sm/gpgsm.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* sm/gpgsm.h (struct opt): Add field request_origin.
* sm/call-agent.c (start_agent): Send option to the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/certlist.c (gpgsm_find_cert): Add arg allow_ambiguous and use it.
* sm/call-dirmngr.c (inq_certificate): Pass true to ALLOW_AMBIGUOUS
(run_command_inq_cb): Ditto.
* sm/gpgsm.c (main): Pass false.
* sm/server.c (cmd_passwd): Pass false.
--
As described in my report T1644, it is possible that multiple
certificates exist with the same Distinguished Name and the same key.
In this case, verifying S/MIME signatures and other actions fail with
"certificate not found: Ambiguous name". For details see the bug
report.
To circumvent the problem, I am patching GnuPG since 2014 so that in
this case the newest of the ambiguous certificates is used.
This is not an ultimate solution of the problem: You should try every
certificate with the same DN until verification succeeds or until all
certificates fail, and if multiple certificates of a chain are
ambiguous you even have to check every combination. You may even
consider checking the keyUsage attributes of the ambiguous certificates
to reduce the number of combinations.
But in the existing case of the certificates in the German Research
Network (DFN) PKI where the newest one is the valid one and all
ambiguous certificates have the same keyUsage attributes, this patch
has proven to be sufficient over the last three years.
With every GnuPG update, I have adapted the patch, luckily I never
needed to change anything except line numbers.
GnuPG-bug-id: 1644
ChangeLog log written by wk, comment taken from mail. Signed-off line
was missing in the plain diff. However the mail with the patch and
the DCO posted as reply to that mail were both signed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/pkscreening.c: New.
* common/pkscreening.h: New.
* common/Makefile.am (common_sources): Add them.
* g10/gpg.c (opts): New option --with-key-screening.
* g10/options.h (struct opt): New field with_key_screening.
* g10/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(list_keyblock_print): Call it.
(print_compliance_flags): Call it.
* sm/gpgsm.c (opts): New option --with-key-screening.
* sm/gpgsm.h (scruct opt): New field with_key_screening.
* sm/keylist.c: Include pkscreening.h.
(print_pk_screening): New.
(print_compliance_flags): Call it. Add new arg cert.
(list_cert_colon): Pass arg cert
(list_cert_std): Call print_pk_screening.
* sm/fingerprint.c (gpgsm_get_rsa_modulus): New.
--
This new option can be used to detect ROCA affected keys. To scan an
entire keyring and print the affected fingerprints use this:
gpg -k --with-key-screening --with-colons | gawk -F: \
'$1~/pub|sub|sec|ssb|crt/ && $18~/\<6001\>/ {found=1;next};
$1=="fpr" && found {print $10}; {found=0}'
The same works for gpgsm. Note that we need gawk due to the "\<" in
the r.e.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_parse_compliance_option): New function.
* common/compliance.h (struct gnupg_compliance_option): New type.
(gnupg_parse_compliance_option): New prototype.
* g10/gpg.c (parse_compliance_option): Remove function.
(compliance_options): New variable.
(main): Adapt callsite.
* sm/gpgsm.c (main): Use the new common function.
* sm/gpgsm.h (opt): New field 'compliance'.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* common/ksba-io-support.c: Include ksba-io-support.h instead of
../sm/gpgsm.h. Include util.h.
(writer_cb_parm_s): Remove const from 'pem_name'.
(gpgsm_destroy_writer): Free 'pem_name'.
(gpgsm_create_reader): Rename to ...
(gnupg_ksba_create_reader): this. Replace args CTRL and
ALLOW_MULTI_PEM by a new arg FLAGS. Change the code to evaluate
FLAGS. Change all callers to pass the FLAGS.
(gpgsm_create_writer): Rename to ...
(gnupg_ksba_create_writer): this. Replace arg CTRL by new arg FLAGS.
Add arg PEM_NAME. Evaluate FLAGS. Store a copy of PEM_NAME. Change
all callers to pass the FLAGS and PEM_NAME.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Make ANY_REGISTERED
file-global. Write a STATUS_ERROR.
(maybe_create_keyring_or_box): Check for non-accessible but existant
file.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND.
* sm/keydb.c (keydb_add_resource): Rename ANY_PUBLIC to ANY_REGISTERED
and make file-global. Write a STATUS_ERROR.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND. Also add new arg CTRL and change
all callers to pass it down.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpgsm.texi: Document '--pinentry-mode' and '--passphrase-fd'.
* sm/Makefile.am (gpgsm_SOURCES): Add new files
* sm/call-agent.c (struct default_inq_parm_s): New definition.
(start_agent): Pass in the pinentry mode.
(default_inq_cb): Handle 'PASSPHRASE' and 'NEW_PASSPHRASE' inquiries.
Adapt all call sites to the new callback cookie.
* sm/gpgsm.c (cmd_and_opt_values): Add new values.
(opts): Add new options.
(main): Handle new options.
* sm/gpgsm.h (struct opt): Add field 'pinentry_mode'.
* sm/passphrase.c: New file.
* sm/passphrase.h: Likewise.
GnuPG-bug-id: 1970
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpgsm.texi: Drop description.
* sm/gpgsm.c (cmd_and_opt_values): Drop enum value.
(opts): Drop argument.
(main): Drop argument handling.
* sm/gpgsm.h (struct opt): Drop field 'fixed_passphrase'.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* sm/server.c (option_handler): Add "offline".
(cmd_getinfo): Ditto.
* sm/certchain.c (is_cert_still_valid):
(do_validate_chain):
* sm/gpgsm.c (gpgsm_init_default_ctrl): Default "offline" to the value
of --disable-dirmngr.
* sm/call-dirmngr.c (start_dirmngr_ext): Better also check for
ctrl->offline.
--
Adding this option makes it easier to implement the corresponding
feature in gpgme.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (opt): Add field "no_homedir_creation".
* sm/gpgsm.c (main): Set it if --no-options is used.
* sm/keydb.c (try_make_homedir): New. Similar to the one from
g10/openfile.c.
(maybe_create_keybox): New. Similar to the one from g10/keydb.c.
(keydb_add_resource): Replace some code by maybe_create_keybox.
* g10/gpg.c: Add option --with-secret.
* g10/options.h (struct opt): Add field with_secret.
* g10/keylist.c (public_key_list): Pass opt.with_secret to list_all
and list_one.
(list_all, list_one): Add arg mark_secret.
(list_keyblock_colon): Add arg has_secret.
* sm/gpgsm.c: Add option --with-secret.
* sm/server.c (option_handler): Add option "with-secret".
* sm/gpgsm.h (server_control_s): Add field with_secret.
* sm/keylist.c (list_cert_colon): Take care of with_secret. Also move
the token string from the wrong field 14 to 15.
--
This option is useful for key managers which need to know whether a
key has a secret key. This change allows to collect this information
in one pass.
* sm/gpgsm.h (VALIDATE_FLAG_STEED): New.
* sm/gpgsm.c (gpgsm_parse_validation_model): Add model "steed".
* sm/server.c (option_handler): Allow validation model "steed".
* sm/certlist.c (gpgsm_cert_has_well_known_private_key): New.
* sm/certchain.c (do_validate_chain): Handle the
well-known-private-key attribute. Support the "steed" model.
(gpgsm_validate_chain): Ditto.
* sm/verify.c (gpgsm_verify): Return "steed" in the trust status line.
* sm/keylist.c (list_cert_colon): Print the new 'w' flag.
--
This is the first part of changes to implement the STEED proposal as
described at http://g10code.com/steed.html . The idea for X.509 is
not to use plain self-signed certificates but certificates signed by a
dummy CA (i.e. one for which the private key is known). Having a
single CA as an indication for the use of STEED might help other X.509
implementations to implement STEED.
Using "gpgsm --genkey" allows the creation of a self-signed
certificate via a new prompt.
Using "gpgsm --genkey --batch" should allow the creation of arbitrary
certificates controlled by a parameter file. An example parameter file
is
Key-Type: RSA
Key-Length: 1024
Key-Grip: 2C50DC6101C10C9C643E315FE3EADCCBC24F4BEA
Key-Usage: sign, encrypt
Serial: random
Name-DN: CN=some test key
Name-Email: foo@example.org
Name-Email: bar@exmaple.org
Hash-Algo: SHA384
not-after: 2038-01-16 12:44
This creates a self-signed X.509 certificate using the key given by
the keygrip and using SHA-384 as hash algorithm. The keyword
signing-key can be used to sign the certificate with a different key.
See sm/certreggen.c for details.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
