* scd/app-p15.c (do_decipher): Get the keygrip.
--
This was lost during the backport.
Fixes-commit: 4af38ea5e4
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_decipher): New.
--
tested using the D-TRUSt card and a SCR3310 reader. The Kobil KAAN
Advanced, I used for the signing tests could not be used because it
supports only Short APDU Level exchange.
Signed-off-by: Werner Koch <wk@gnupg.org>
Back ported from master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_sign): Factor code out to ...
(prepare_verify_pin, verify_pin): new functions.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Bakc ported from master
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-help.c (app_help_get_keygrip_string_pk): Add optional arg
r_pkey and change all callers.
(app_help_get_keygrip_string): Ditto.
* scd/app-p15.c (struct cdf_object_s): Use bit flags
(struct aodf_object_s): Ditto. Add field 'fid'.
(struct prkdf_object_s): Ditto. Add fields keygrip, keyalgo, and
keynbits.
(parse_certid): Allow a keygrip instead of a certid aka keyref.
(read_ef_aodf): Store the FID.
(keygripstr_from_prkdf): Rename to ...
(keygrip_from_prkdf): this. Remove arg r_gripstr and implement cache.
Change callers to directly use the values from the object. Also store
the algo and length of the key ion the object.
(keyref_from_keyinfo): New. Factored out code.
(do_sign): Support SHA-256 and >2048 bit RSA keys.
common/scd:p15: Support signing with CardOS 5 cards.
* common/util.h (KEYGRIP_LEN): New.
--
This has been tested with a D-Trust card featuring 3072 bit keys.
Note that non-repudiation key for a qualified signature does not yet
work because we do not yet support rsaPSS padding. Thus a gpgsm
--learn shows a couple of Bad Signature errors for this key.
Signed-off-by: Werner Koch <wk@gnupg.org>
Back ported from master:
- Removed do_with_keygrip
- Added KEYGRIP_LEN
- app_help_get_keygrip_string_pk actually added.
- Move keygrip_from_prkdf in do_sign before the verification.
It used to work in master only because there it is implictly
called prior to signing by do_with_keygrip
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary): Factor code out to ...
(iso7816_read_binary_ext): new function. Add arg extended_mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This removes almost all log_debug calls and uses opt.verbose and
log_info to show card information. Also avoid too long and thus
harder to read lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
(back ported from master)
* scd/app-p15.c (read_ef_odf): Detect the home_DF on the fly. Silence
the garbage warning for null bytes.
(print_tokeninfo_tokenflags): New.
(read_ef_tokeninfo): Print manufacturer, label, and flags.
(app_select_p15): No need to use the app_get_slot macro.
(CARD_TYPE_CARDOS_50): New const.
(card_atr_list): Detect CardOS 5.0
--
The card under test is a "Test-Signaturkarte D-TRUST Card 3.1" for a
mere 49 Euro and no specs available. D-Trust is a branch of the
German Bundesdruckerei. Compare that to Telesec and Yubikey who have
always been nice enough to send bunches of sample cards without a need
to wade through lots of forms and not even asking for money. Guess
which cards I prefer.
Signed-off-by: Werner Koch <wk@gnupg.org>
(backported from master)
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.h (GEMPC_EZIO): New.
* scd/ccid-driver.c (ccid_transceive_secure): Support GEMPC_EZIO.
--
This is backport from master.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-agent.c (agent_scd_keypairinfo): Use --keypairinfo.
* sm/call-agent.c (gpgsm_agent_scd_keypairinfo): Ditto.
* scd/app-openpgp.c (do_getattr): Add attributes "$ENCRKEYID" and
"$SIGNKEYID".
* scd/app-nks.c (do_getattr): Add attributes too.
--
We already have $AUTHKEYID to locate the keyref of the key to be used
with ssh. It will also be useful to have default keyref for
encryption and signing. For example, this will allow us to replace
the use of "OPENPGP.2" by a app type specific keyref.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 2b1135cf92)
Removed changes for the non-existing app-piv.c.
Added support for NKS.
* g10/card-util.c (current_card_status): String changes.
(change_sex): Description change.
(cmds): Add "salutation"; keep "sex" as an alias.
--
Note that we can't change the used values or tags but at least the UI
should show reflect the real purpose of the field.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 166f3f9ec4)
* scd/ccid-driver.c (bulk_in): Increase timeout by the multiplier
value as defined section 6.2.6 in CCID specification.
--
Backport master commit of:
996c497a86
For TPDU level transfer, it was handled. This is fix for APDU level
transfer.
GnuPG-bug-id: 4646
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_transceive_apdu_level): Use bBWI=0 for APDU
level transfer.
(ccid_transceive): Use bBWI=0 or the value returend by WTX for TPDU
level transfer.
--
Backported master commit of:
858dc95643
GnuPG-bug-id: 4654
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.
--
Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit af3efd149f)
* scd/app-openpgp.c (do_setattr): Add new table item to flush a
different tag.
--
For whatever reasons the OpenPGP card reads the 3 CA fingerprints from
one object but sets them individually using 3 different tags. The
cache flushing was not prepared for this and so a changed CA
fingerprint showed only up after a card reset. This patch fixes it.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c9f4c1f0de)
Fixed conflict by removing the UIF-* entries from the table.
* scd/app.c (app_genkey): Add arg keytype.
* scd/app-common.h (struct app_ctx_s): Fitto for the genkey member.
* scd/command.c (cmd_genkey): Adjust for change.
* scd/iso7816.c (do_generate_keypair): Replace arg read_only by new
args p1 and p2.
(iso7816_read_public_key): Adjust for this.
(iso7816_generate_keypair): Add new args p1 and p2.
* scd/app-openpgp.c (do_genkey): Adjust for changes.
--
The OpenPGP card creates keys according to parameters read from a data
object. Other cards we are about to implement require a direct
specification of the requested keytype. This patch implements the
required changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9a9cb0257a)
* scd/app-common.h (APP_GENKEY_FLAG_FORCE): New.
* scd/app.c (app_change_pin): Rename arg reset_mode to flags and
change from int to unsigned int.
--
This is basically a documentation fix.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c26af8ac26)
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card. This has been taken from master commit
3231ecdafd which has additional changed
for gpg-card-tool, which is only available there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_passwd): Add option --clear.
(send_status_printf): New.
* scd/app-common.h (APP_CHANGE_FLAG_CLEAR): New.
* scd/app-nks.c (do_change_pin): Return an error if that option is
used.
* scd/app-openpgp.c (do_change_pin): Ditto.
--
Card application may support this option to clear the PIN verification
status of a specific PIN.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 29929e6552)
* scd/apdu.c (apdu_send_direct): New arg R_SW.
* scd/command.c (cmd_apdu): Ditto.
* scd/iso7816.c (iso7816_apdu_direct): New arg R_SW.
(iso7816_general_authenticate): New.
* scd/app-nks.c (get_chv_status, get_nks_version): Pass NULL for new
arg.
--
iso7816_general_authenticate will be used for the PIV card support.
The new arg to iso7816_apdu_direct and apdu_send_direct allows to get
the raw status word back without the need to handle an output buffer.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 70bb5c7931)
* scd/ccid-driver.c (intr_cb): When LIBUSB_TRANSFER_NO_DEVICE,
just handle this event as failure.
--
Cherry-picked from master commit:
5ab3bc422a
It used to try another interrupt transfer request to make sure
if it fails again.
GnuPG-bug-id: 4308
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_sign): Clear DID_CHV1 after signing.
--
Cherry-picked from master commit of:
78f542e1f4
We have a corner case: In "not forced" situation and authenticated,
and it is changed to "forced", card implementaiton can actually accept
signing, but GnuPG requires authentication, because it is "forced".
GnuPG-bug-id: 4177
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (gen_kdf_data): Support single salt.
(kdf_setup): Can have argument for single salt.
* scd/app-openpgp.c (pin2hash_if_kdf): Support single salt.
--
Gnuk has "admin-less" mode. To support "admin-less" mode with KDF
feature, salt should be same for user and admin. Thus, I introduce a
valid use of single salt.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (change_rsa_keyattr): Try usual RSA.
--
In the OpenPGP card specification, there are multiple options to
support RSA (having P and Q or not, etc.), and it is implementation
dependent. Since GnuPG doesn't have knowledge which card
implementation support which option and there is no way (yet) for card
to express itself which key attributes are supported, we haven't
supported key attribute change back to RSA. But, many card
implementation uses P and Q, try this option. If other cases,
factory-reset would be easier option.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c (setup_signal_mask): New.
(main): Call setup_signal_mask.
(handle_connections): Remove signal mask setup.
--
For new thread, signal mask is inherited by thread creation.
Thus, it is best to setup signal mask just after npth_init.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Try submitting INTERRUPT urb
to see if it's suspend/resume.
--
Upon suspend/resume, LIBUSB_TRANSFER_NO_DEVICE is returned, since all
URBs are cancelled. We need to see if it's real NODEV error or its by
suspend/resume. We can distinguish by sending URB again.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac (require_pipe_to_unblock_pselect): Default is "yes".
* scd/scdaemon.c (scd_kick_the_loop): Minor clean up.
--
Normally SIGCONT or SIGUSR2 works for unblocking pselect. But on my
machine with GNU/Linux, when a machine is suspend/resume-ed, pselect
keeps blocked, while signal itself is delivered.
It's better to use pipe.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Add field of current_state.
(new_reader_slot): Initialize current_state.
(pcsc_get_status): Keep the status in READER_TABLE array.
Return SW_HOST_NO_READER when PCSC_STATE_CHANGED.
* scd/scdaemon.c (handle_connections): Silence a warning.
--
To detect some change of card status, including suspend/resume
possibly, SCardGetStatusChange should be used keeping the
dwCurrentState field.
This change could improve situation for suspend/resume with Yubikey on
Windows. Even not, this is doing the Right Thing.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/asshelp2.c (vprint_assuan_status_strings): New.
(print_assuan_status_strings): New.
* agent/command.c (agent_write_status): Replace by call to new
function.
* dirmngr/server.c (dirmngr_status): Ditto.
* g13/server.c (g13_status): Ditto.
* g13/sh-cmd.c (g13_status): Ditto.
* sm/server.c (gpgsm_status2): Ditto.
* scd/command.c (send_status_info): Bump up N.
--
This fixes a potential overflow if LFs are passed to the status
string functions. This is actually not the case and would be wrong
because neither the truncating in libassuan or our escaping is not the
Right Thing. In any case the functions need to be more robust and
comply to the promised interface. Thus the code has been factored out
to a helper function and N has been bumped up correctly and checked in
all cases.
For some uses this changes the behaviour in the error case (i.e. CR or
LF passed): It will now always be C-escaped and not passed to
libassuan which would truncate the line at the first LF.
Reported-by: private_pers
* scd/app-openpgp.c (get_cached_data): Return NULL for Data Object
with no data.
--
When GET_DATA returns no data with success (90 00), this routine
firstly returned buffer with length zero, and secondly (with cache)
returned NULL, which is inconsistent. Now, it returns NULL for both
cases.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac (HAVE_PSELECT_NO_EINTR): New.
* scd/scdaemon.c (scd_kick_the_loop): Write to pipe.
(handle_connections): Use pipe.
--
On NetBSD, signal to the same process cannot unblock pselect,
with unknown reason. Use pipe instead, for such systems.
GnuPG-bug-id: 3778
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
