* g10/keygen.c (ask_key_flags_with_mask): Allow more than ECDH for
legacy curves.
(ask_algo): Tweak mapping of ECC to OpenPGP algos
(parse_key_parameter_part): Ditto.
(generate_subkeypair): Create the subkey with the time stored on the
card.
--
This fixes two problems with generating keys from a card:
1. The key usage is now set correctly for brainpool curves.
2. The add-key and --quick-add-key commands now also take the creation
time from the time stored on the card. Without that we would need
to update the creation time and fingerprint already stored on the
card which is a no-go if another key has already been created using
that on-card key.
Note: To create a key on a card without an OpenPGP keyblock use
gpg-card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Now, it's only for
encrytion.
(pk_ecdh_decrypt): Use prepare_ecdh_with_shared_point and move decrypt
code path in original pk_ecdh_encrypt_with_shared_point here.
* g10/pkglue.h (pk_ecdh_encrypt_with_shared_point): Change API.
* g10/pkglue.c (pk_encrypt): Follow the change.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/ecdh.c (build_kdf_params): New.
(pk_ecdh_encrypt_with_shared_point): Use build_kdf_params, and check
things before extract_secret_x.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/decrypt-data.c (decrypt_data): Move aead algo detection up.
--
Note that the AEAD modes are not yet approved for --compliance=de-vs
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/main.h (DEFAULT_AEAD_ALGO): Set to OCB.
--
With the old code and using libgcrypt 1.9 would have switched from the
high performance OCB to the ugly EAX mode. We are free software, we
are OCB.
* g10/pubkey-enc.c (get_it): Remove check which mandates shorter
padding.
--
According to the section 8 of RFC 6637, the sender MAY use 21 bytes of
padding for AES-128 to provide 40-byte "m".
Reported-by: Metin Savignano
GnuPG-bug-id: 4908
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-card.h (struct card_info_s): Add manufacturer fields.
* tools/card-call-scd.c (release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* tools/gpg-card.c (get_manufacturer): Remove.
(list_card): Use the new attribute.
* g10/call-agent.h (struct agent_card_info_s): Add manufacturer fields.
* g10/call-agent.c (agent_release_card_info): Release them.
(learn_status_cb): Parse MANUFACTURER attribute.
* g10/card-util.c (get_manufacturer): Remove.
(current_card_status): Use new attribute.
--
This does away with the duplicated OpenPGP vendor tables; they are now
at a better place (app-openpgp.c).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well
as long key ID.
* doc/gpg.texi: document that --trusted-key can accept a fingerprint.
--
GnuPG-bug-id: 4855
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Fixed uses or return and kept the old string to avoid breaking
translations.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (merge_selfsigs_main): Take a zero key creation time in
account.
--
Keys created at the Epoch have a creation time of 0; when figuring out
the latest signature with properties to apply to a key the usual
comparison A > B does not work if A is always 0. We now special case
this for the expiration and usage data.
Co-authored-by: gniibe@fsij.org
GnuPG-bug-id: 4670
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): New options --auto-key-import,
--no-auto-key-import, and --no-include-key-block.
(gpgconf_list): Add them.
* g10/options.h (opt): Add field flags.auto_key_import.
* g10/mainproc.c (check_sig_and_print): Use flag to enable that
feature.
* tools/gpgconf-comp.c: Give the new options a Basic config level.
--
Note that the --no variants of the options are intended for easy
disabling at the command line.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_key_from_file): Rename to ...
(read_key_from_file_or_buffer): this and add new parameters. Adjust
callers.
(import_included_key_block): New.
* g10/packet.h (PKT_signature): Add field flags.key_block.
* g10/parse-packet.c (parse_signature): Set that flags.
* g10/sig-check.c (check_signature2): Add parm forced_pk and change
all callers.
* g10/mainproc.c (do_check_sig): Ditto.
(check_sig_and_print): Try the included key block if no key is
available.
--
This is is the second part to support the new Key Block subpacket.
The idea is that after having received a signed mail, it is instantly
possible to reply encrypted - without the need for any centralized
infrastructure.
There is one case where this does not work: A signed mail is received
using a specified signer ID (e.g. using gpg --sender option) and the
key block with only that user ID is thus imported. The next time a
mail is received using the same key but with a different user ID; the
signatures checks out using the key imported the last time. However,
the new user id is not imported. Now when trying to reply to that
last mail, no key will be found. We need to see whether we can update
a key in such a case.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_KEY_BLOCK): New.
* g10/gpg.c (oIncludeKeyBlock): New.
(opts): New option --include-key-block.
(main): Implement.
* g10/options.h (opt): New flag include_key_block.
* g10/parse-packet.c (dump_sig_subpkt): Support SIGSUBPKT_KEY_BLOCK.
(parse_one_sig_subpkt): Ditto.
(can_handle_critical): Ditto.
* g10/sign.c (mk_sig_subpkt_key_block): New.
(write_signature_packets): Call it for data signatures.
--
This patch adds support for a to be proposed OpenPGP ferature:
Introduce the Key Block subpacket to align OpenPGP with CMS.
This new subpacket may be used similar to the CertificateSet of
CMS (RFC-5652) and thus allows to start encrypted communication
after having received a signed message. In practice a stripped down
version of the key should be including having only the key material
and the self-signatures which are really useful and shall be used by
the recipient to reply encrypted.
#### Key Block
(1 octet with value 0, N octets of key data)
This subpacket MAY be used to convey key data along with a signature
of class 0x00, 0x01, or 0x02. It MUST contain the key used to create
the signature; either as the primary key or as a subkey. The key
SHOULD contain a primary or subkey capable of encryption and the
entire key must be a valid OpenPGP key including at least one User ID
packet and the corresponding self-signatures.
Implementations MUST ignore this subpacket if the first octet does not
have a value of zero or if the key data does not represent a valid
transferable public key.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (push_export_filters): New.
(pop_export_filters): New.
(export_pubkey_buffer): Add args prefix and prefixlen. Adjust
callers.
* g10/import.c (impex_filter_getval): Add property "fpr".
* g10/main.h (struct impex_filter_parm_s): Add field hexfpr.
--
The push and pop feature will help us to use the export filter
internally in gpg. Same for the export_pubkey_buffer change.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Change oLoadExtensions, oStrict, and oNoStrict to
use ARGPARSE_ignore and remove the code in the option switch.
--
This looks better and is also required for further simplifications of
gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Re-add permission checking of the user config
file. Re-add code to check against the SE-Linux secured file list.
(get_default_configname): Remove unused func.
* configure.ac (SAFE_VERSION, SAFE_VERSION_DOT)
(SAFE_VERSION_DASH): Remove.
--
Die to the switch to the new option parser, the permissions were not
anymore checked. This patch fixes this. Note that there there is no
checking for the global config file because that file is not expected
to be user modifiable.
This patch also adds checking against the list of SE-linux secured
files. However, like in the old code the checking does not work in
practise because the to be checked files are added to the the list
only after option parsing. Tested using temporary debug code.
The SAFE_VERSION macros were used for RISC OS, which is not anymore
supported, and only in the now removed get_default_configname. There
purpose was that a RISC OS could use a modified config.h here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpgv.c: Use new option parser.
* sm/gpgsm.c: Ditto.
* agent/gpg-agent.c: Ditto.
(opts): Add option --no-options.
--
This is the next part of changes. The latest libgpg-error is required
so that that re-reading options (SIGHUP) works.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_seckey_default_or_card): Handle the case
when card key is not suitable for requested usage.
--
Cherry-pick stable commit of:
1cdd9e57f7
GnuPG-bug-id: 4850
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/call-agent.h (struct keypair_info_s): Add fields keytime and
usage.
* g10/call-agent.c (struct keypairinfo_cb_parm_s): New.
(scd_keypairinfo_status_cb): Rework to store parsed KEYPAIRINFO data.
(agent_scd_keypairinfo): Change accordingly.
(agent_scd_readkey): Add arg ctrl and change callers. Change return
arg from an strlist_t to a keypair_info_t.
(readkey_status_cb): Use KEYPAIRINFO instead of KEY-TIME.
* g10/keygen.c (pSUBKEYCREATIONDATE): New.
(pAUTHKEYCREATIONDATE): New.
(get_parameter_u32): Allow for new parameters.
(do_create_from_keygrip): For card keys use direct scd call which does
not create a stub file.
(ask_algo): Rework to use the new keypair_info_t as return from
agent_scd_keypairinfo.
(parse_key_parameter_part): Likewise. Also get and return the key
creation time using a arg.
(parse_key_parameter_string): New args r_keytime and r_subkeytime.
(parse_algo_usage_expire): New arg r_keytime.
(proc_parameter_file): Ignore the explict pCREATIONDATE for card keys.
(quickgen_set_para): New arg keytime.
(quick_generate_keypair): Get the keytimes and set the pCARDKEY flag.
(generate_keypair): Likewise.
(do_generate_keypair): Implement the cardkey with keytime thingy.
(generate_subkeypair): Use the keytime parameters.
* g10/keygen.c (pAUTHKEYCREATIONDATE): New. Not yet set but may come
handy later.
(get_parameter_u32): Take care of that.
(do_generate_keypair): For cardkeys sign with the current time.
--
Key generation direct from the card used to work for all cards except
the OpenPGP cards. The key generation from card using an OpenPGP card
is special because the fingerprint is stored on the card and we must
make sure that the newly created key has the same fingerprint. This
requires that we take the key creation date as stored on the card into
account.
Along with the recent change in gpg-agent this change also fixes a
problem with existing stub files.
Note that with a key take from a card the self-signature are created
with the current time and not the creation time. This allows to
better distinguish keys created using the same card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.h (struct card_key_info_s): Rename to ...
(struct keypair_info_s): this.
(keypair_info_t): New. Use this everywhere instead of
card_key_info_s.
* g10/call-agent.c (agent_scd_free_keyinfo): Rename to ..
(free_keypair_info): this. Change all callers.
--
The struct is also useful to store the data from KEYPAIRINFO status
lines. Thus renaming it makes sense. A future patch will extend the
struct.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (readkey_status_cb): New.
(agent_scd_readkey): Add new arg r_keytime and allow NULL for
r_result. Change all callers.
(agent_readkey): Minor code reformatting.
* g10/keygen.c (pCARDKEY): New.
(struct para_data_s): Add u.bool.
(get_parameter_bool): New.
(do_create_from_keygrip): Add arg cardkey and make use of it.
(ask_algo): Add args r_cardkey and r_keytime. Read the keytime of the
selected card key and return it.
(generate_keypair): Store CARDKEY and KEYTIME.
(do_generate_keypair): Pass CARDKEY to do_create_from_keygrip.
(generate_subkeypair): Ditto.
--
This allows to first create keys on the card (e.g. using gpg-card)
even without having any public key for OpenPGP. Then the key
generation option 14 (cardkey) can be used to create a primary OpenPGP
key from the key on the card.
There are still a couple of problems related to the agent which
creates the stub key and may run into problems if creating a second
key from the card. This will be fixed in a future patch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_curve_to_oid): Add optional arg R_NBITS.
Change all callers.
--
In particular for ed25519 and cv25519 it is quite useful to have an
ability to get the required algorithm.
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/verify.c (verify_files): Track the first error code.
--
It seems to be possible to play tricks with packet structures so that
log_error is not used for a bad input data. By actually checking the
return code and let the main driver in gpg call log_error, we can fix
this case.
Note that using gpg --verify-files and relying solely on gpg's return
code is at best a questionable strategy. It is for example impossible
to tell which data has been signed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (send_key_attr): Use log_assert.
(do_genkey): Allow prefix.
--
It is more uniform to always use full keyref (e.g. "OPENPGP.1")
instead of just the key number.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (struct keyalgo_string_s): New.
(keyalgo_strings): New.
(keyalgo_strings_size, keyalgo_strings_used): New.
(get_keyalgo_string): New.
--
This function is intended as a more general version of gpg's
pubkey_string function. It has the advantage to avoid mallocs and
uses static table of algorithm strings instead. There should be only
a few dozen of such strings (if at all) and thus all those allocations
we do internally in gpg's pubkey_string and the static buffers all
over the place are not too nice.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (map_pk_gcry_to_openpgp): Move to ...
* common/openpgp-oid.c (map_gcry_pk_to_openpgp): here and rename.
Change all 4 callers.
(map_openpgp_pk_to_gcry): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (keyinfo_status_cb): Parse more fields.
(agent_probe_secret_key): Use KEYINFO and returns bigger value
representing the preference.
* g10/getkey.c (finish_lookup): For subkeys, select one
by using value of agent_probe_secret_key.
--
GnuPG-bug-id: 3416
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/parse-packet.c (enum_sig_subpkt): Print a hexdump.
--
A test key for this is 02DF08F5FD356BF27F5F7B838921B5DCCD15A883 .
A key listing in verbose mode will now yield
gpg: DBG: buffer shorter than subpacket (10/9/25);\
dump: 19100d87e54973647cff
The error here is that the packet length is 0x19 but what follows is a
long keyid (subpacket 16) which is shorter. The debug output might be
helpful to better analyze broken signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Don't use agent_scd_cardlist and
agent_scd_serialno, but agent_scd_keyinfo.
--
When there are multiple cards/tokens, this change can avoid switching
card of foreground access.
GnuPG-bug-id: 4784
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/sysutils.c (inhibit_set_foregound_window): New var.
(gnupg_inhibit_set_foregound_window): New func.
(gnupg_allow_set_foregound_window): Use var.
* g10/gpg.c (main): Inhibit in loopback mode.
* sm/gpgsm.c (main): Ditto.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (open_card_with_request): Use NULL instead of
APPTYPE_NULL.
--
Using the enum is wrong because a string is expected. However it did
harm anything because the value of the enum is 0 and thus equivalent
to NULL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_one): Probe for a secret key in --with-secret
mode.
--
In contrast to list_all(), list_one() did not tests for a secret key
and took MARK_TRUSTED verbatim as an indication for "secret key
available".
GnuPG-bug: 4061
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/server.c (proc_wkd_get): Print new NOTE status
"wkd_cached_result".
* g10/call-dirmngr.c (ks_status_cb): Detect this and print a not ein
verbose mode.
--
This little patch is helpful to see why a WKD change still does not
work after it has been updated on the server.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_byname): Extend is_mbox checking.
(get_best_pubkey_byname): Ditto.
--
With this patch it is now possible to use
gpg -e -r '<foo@example.org>'
and auto key locate will find the key. Without that a plain mail
address; i.e.
gpg -e -r 'foo@example.org'
was required.
GnuPG-bug-id: 4726
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (MAX_FORMATTED_FINGERPRINT_LEN): Increase by one.
* g10/keyid.c (format_hexfingerprint): Change v5 key formatting.
--
The new format are groups of 5 letters to resemble the CW speed
measurement rules. Many hams are used to such blocks from their CW
lessons. Note that there is no double blank in the middle as with the
v4 keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-keyboxd.c (struct store_parm_s): New.
(store_inq_cb): New.
(keydb_update_keyblock): Implement the keyboxd part.
(keydb_insert_keyblock): Ditto.
(keydb_delete_keyblock): Ditto.
(keydb_search_reset): Clear ubid flag. Also use the correct union
member for building the search string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (UBID_LEN): New. Use it at all places.
* kbx/keybox-blob.c (create_blob_finish): Do not write the UBID item.
* kbx/keybox-dump.c (print_ubib): Remove.
(_keybox_dump_blob): Do not print the now removed ubid flag.
* kbx/keybox-search-desc.h (struct keydb_search_desc): Use constants
for the size of the ubid and grip.
* kbx/keybox-search.c (blob_cmp_ubid): New.
(has_ubid): Make it a simple wrapper around blob_cmp_ubid.
(keybox_get_data): Add arg 'r_ubid'.
* kbx/frontend.h (enum kbxd_store_modes): New.
* kbx/kbxserver.c (cmd_store): Add new option --insert.
* kbx/backend-cache.c (be_cache_initialize): New.
(be_cache_add_resource): Call it here.
* kbx/backend-kbx.c (be_kbx_seek): Remove args 'fpr' and 'fprlen'.
(be_kbx_search): Get the UBID from keybox_get_data.
* kbx/backend-support.c (be_fingerprint_from_blob): Replace by ...
(be_ubid_from_blob): new. Change all callers.
* kbx/frontend.c (kbxd_add_resource): Temporary disable the cache but
use the new cache init function.
(kbxd_store): Replace arg 'only_update' by 'mode'. Seek using the
ubid. Take care of the mode.
--
It turned out that using the hash of the entire blob was not helpful.
Thus we redefine the Unique-Blob-ID (UBID) as the primary fingerprint
of the blob. In case this is a v5 OpenPGP key a left truncated
version of the SHA-256 hash is used; in all other cases the full SHA-1
hash. Using a SHA-256 hash does not make sense because v4 keys are
and will for some time be the majority of keys and thus padding them
with zeroes won't make any difference. Even if fingerprint collisions
can eventually be created we will assume that the keys are bogus and
that it does not make sense to store its twin also in our key storage.
We can also easily extend the update code to detect a collision and
reject the update.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/DETAILS: Specify new status code "NOTE".
* dirmngr/ks-engine-http.c (ks_http_fetch): Print a NOTE status for a
bad TLS certificate.
* g10/call-dirmngr.c (ks_status_cb): Detect this status.
--
For example a
gpg -v --locate-external-keys dd9jn@posteo.net
now yields
gpg: Note: server uses an invalid certificate
gpg: (further info: bad cert for 'posteo.net': \
Hostname does not match the certificate)
gpg: error retrieving 'dd9jn@posteo.net' via WKD: Wrong name
gpg: error reading key: Wrong name
(without -v the "further info" line is not shown). Note that even
after years Posteo is not able to provide a valid certificate for
their .net addresses. Anyway, this help to show the feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/http.c: Include dirmngr-status.h
(http_prepare_redirect): Emit WARNING status lines for redirection
problems.
* dirmngr/http.h: Include fwddecl.h.
(struct http_redir_info_s): Add field ctrl.
* dirmngr/ks-engine-hkp.c (send_request): Set it.
* dirmngr/ks-engine-http.c (ks_http_fetch): Set it.
* g10/call-dirmngr.c (ks_status_cb): Detect the two new warnings.
--
This should make it easier to diagnose problems with bad WKD servers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one_real): Don't do the final clean in the
merge case.
--
This fixes a regression introduced with self-sigs-only.
GnuPG-bug-id: 4628
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (pubkey_cmp): Handle a primary key with
PUBKEY_USAGE_ENC, and make sure new key is for encryption.
(get_best_pubkey_byname): Add comment for ranking.
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_best_pubkey_byname): Always use PK0 to search
by get_pubkey_byname. Add initial call to pubkey_cmp to fill
BEST at first before the loop.
--
Fixes-commit: 44604209c1
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_best_pubkey_byname): After the call of
get_pubkey_byname, set up CTX with KEYDB_SEARCH_MODE_LONG_KID to enter
the loop.
--
Fixes-commit: 7535f1d47a
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_best_pubkey_byname): Handle the first key
as the initial candidate for the selection.
--
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/sig-check.c (check_signature_over_key_or_uid): No cut-off date
and remove debug output.
--
With 2.2 we do not not support SHA-1 key signatures anymore even if
that means that the WoT shrinks.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb-private.h (struct keydb_handle_s): Add fields for UBID.
* g10/call-keyboxd.c (search_status_cb): New.
(keydb_search): Set new UBID fields.
--
The UBID is not yet used but may come handy later.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_retrieval_screener): Compare against
actual length.
--
This was a long standing and annoying regression due to changes
for v5 keys. Really simple to fix :-).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/expand-group.c (expand_group): Add arg prepend_input.
* g10/pkclist.c (build_pk_list): Adjust for it.
* g10/getkey.c (key_byname): Keep the expanded names in the CTX and
don't premature free them.
(get_pubkey_byname): Append the namelist to the extra_list.
--
The original patch didn't kept the expanded list in the context and
also would duplicate names which are not group names. The latter does
not really harm but the former lead to a use after free. Original
patch was applied just a few weeks ago.
Fixes-commit: e825aea2ba
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Resolved Conflicts:
* common/asshelp.c: Keep the new code in master for spawing under
Windows.
* g10/Makefile.am: Keep all new file.
* g10/photoid.c: Pass CTRL to pct_expando.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/Makefile.am: Add nPth flags.
* g10/gpg.c: Include npth.h.
(gpg_deinit_default_ctrl): Deinit call-keyboxd local data.
(main): Init nPth.
* g10/keydb-private.h (struct keydb_handle_s): Add field 'kbl' and
remove the search result and the assuan context.
* g10/call-keyboxd.c (struct keyboxd_local_s): Add more fields.
(lock_datastream, unlock_datastream): New.
(gpg_keyboxd_deinit_session_data): Adjust for changed data structures.
(prepare_data_pipe): New.
(open_context): Return kbl instead of an Assuan context. Init mutexes
etc.
(close_context): Merge into ...
(keydb_release): here. Adjust for changed data structures.
(datastream_thread): New.
(keydb_get_keyblock): Implement datastream stuff.
(keydb_search): Ditto.
* common/asshelp.c (wait_for_sock): Add arg connect_flags.
(start_new_service): Set FDPASSING flag for the keyboxd.
--
This code as a lot of rough edges, in particular it relies on a well
behaving keyboxd. We need to add code to shutdown the datastream
reader thread in case of errors and to properly get it up again. We
also need to make really sure that both threads run in lockstep so
that the datastream thread is only active while we are sending a
command to the keyboxd.
We should also see whether we can depend nPth initialization on the
--use-keyboxd option to avoid any problems with nPth.
And we need to test on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oUseKeyboxd,oKeyboxdProgram): New consts.
(opts): New options --use-keyboxd and --keyboxd-program.
(main): Implement them.
* g10/keydb.c: Move some defs out to ...
* g10/keydb-private.h: new file.
* g10/keydb.c: prefix function names with "internal" and move original
functions to ...
* g10/call-keyboxd.c: new file. Divert to the internal fucntion if
--use-keyboxd is used. Add a CTRL arg to most fucntions and change
all callers.
* g10/Makefile.am (common_source): Add new files.
(noinst_PROGRAMS): Do bot build gpgcompose.
--
Note that this is just the framework with only a basic implementation
of searching via keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/expand-group.c: New
* g10/pkclist.c: Extract expand_group and expand_id into expand-group.c.
* g10/keydb.h: Add prototypes of expand_id and expand_group.
* g10/getkey.c: Use expand_group before resolving key references.
* g10/Makefile.am: Compile expand-group.c.
--
When searching a key by its name, try to expand the provided name in
case it is a GPG group reference. This GPG group resolution is performed
before the individual keys are verified.
This allows key listing using a GPG group reference. In particular, this
modification fixes the encryption to group support in KDE's Kmail which
is broken since version 18.04.
Signed-off-by: Stephan Mueller <stephan.mueller@atsec.com>
- Changed new filename to use a dash instead of an underscore.
- Indendation changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_ATTST_SIGS): New.
* g10/keydb.h (IS_ATTST_SIGS): New.
(IS_CERT): Include the new one.
* g10/sign.c (mk_notation_policy_etc): Do not put notations into
attestation key signatures.
* g10/parse-packet.c (dump_sig_subpkt): Add new arg digest_algo.
Print the attestation sigs.
(parse_one_sig_subpkt): Support SIGSUBPKT_ATTST_SIGS.
(can_handle_critical): Ditto.
(enum_sig_subpkt): Pass digest algo to dump_sig_subpkt.
--
This change allows to list the new subpacket with --list-packets.
Example output:
:signature packet: algo 22, keyid C694723A1370EAB1
version 4, created 1567097576, md5len 0, sigclass 0x16
digest algo 8, begin of digest ff 0c
hashed subpkt 2 len 4 (sig created 2019-08-29)
hashed subpkt 37 len 32 (attst-sigs: 1
A794C6E9CCFE2F34C67E07[...])
hashed subpkt 33 len 21 (issuer fpr v4 156A3872[...])
subpkt 16 len 8 (issuer key ID C694723A1370EAB1)
data: [256 bits]
data: [256 bits]
GnuPG-bug-id: 4694
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (enum_sig_subpkt): Replace first arg by two args
so that the entire signature packet is available. Change all callers.
(parse_sig_subpkt): Ditto.
--
This patch is a prerequisite to support the new attestation key
signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Call keybox_compress.
* sm/keydb.c (keydb_add_resource): Release the lock after a compress.
--
Note that in gpgsm we already did the compress run but we didn't
released the lock on the file. This might have been a reason for some
strange hangs.
GnuPG-bug-id: 4644
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (akl_empty_or_only_local): New.
* g10/gpg.c (DEFAULT_AKL_LIST): New.
(main): Use it here.
(main) <aLocateExtKeys>: Set default AKL if none is set.
--
This better matches the expectations of the user. The used list in
this case is the default list ("local,wkd") with local ignored by the
command anyway.
GnuPG-bug-id: 4662
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (glo_ctrl): Add flag silence_parse_warnings.
* g10/keylist.c (list_all): Set that during secret key listsings.
* g10/parse-packet.c (unknown_pubkey_warning): If new flag is set do
not print info message normally emitted inh verbose mode.
(can_handle_critical_notation, enum_sig_subpkt): Ditto.
(parse_signature, parse_key, parse_attribute_subpkts): Ditto.
--
Those messages are annoying because they might be emitted due to
parsing public keys which are latter not shows because the secret part
is missing. No functional regressions are expected because --verbose
should not change anything.
Note that this suppression is only done if no arguments are given to
the command; that is if a listing of the entire keyring is requested.
Thus to see the earnings anyway, a listing of a single or group of
keys can be requested.
GnuPG-bug-id: 4627
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (verify_own_keys): Silence informational diagnostic.
--
This silences these notes with --quiet
gpg: Note: RFC4880bis features are enabled.
gpg: key EE65E8C75D41FD1D marked as ultimately trusted
GnuPG-bug-id: 4634
Signed-off-by: Werner Koch <wk@gnupg.org>
