* tools/gpg-zip.in: Correctly set GPG when --gpg is specified.
Correctly set TAR when --tar is specified. Pass TAR_ARGS to tar.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Co-authored-by: Michael Mönch <michael.moench@marktjagd.de>
GnuPG-bug-id 1351
GnuPG-bug-id 1442
* tools/gpgkey2ssh.c (main): Add support for --help. Replace the most
gratuitous asserts with error messages. Invoke gpg2, not gpg.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Debian-bug-id: 380241
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component): Change printed name.
--
All network access is handled by Dirmngr so at least in the GUI option
dialog we should acknowledge that by changing the name to an issuer to
understand term. This is an update of
819bba75aa suggested by Neal Walfield.
The former term "Network Manager" conflicts with the well known GNOME
network manager tool.
* tools/gpgconf-comp.c (gc_component): Change printed name.
--
All network access is handled by Dirmngr so at least in the GUI
option dialog we should acknowledge that by changing the name to an
issuer to understand term.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr.h (opt): Add field "use_tor".
* dirmngr/dirmngr.c (oUseTor): New.
(opts): Add --use-tor.
(parse_rereadable_options): Set option.
(main): Tell gpgconf about that option.
* dirmngr/crlfetch.c (crl_fetch): Pass TOR flag to the http module and
return an error if LDAP is used in TOR mode.
(ca_cert_fetch): Return an error in TOR mode.
(start_cert_fetch): Ditto.
* dirmngr/ks-engine-finger.c (ks_finger_fetch): Pass TOR flag to the
http module.
* dirmngr/ks-engine-hkp.c (send_request): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_get): Return an error in TOR mode.
(ks_ldap_search): Ditto.
(ks_ldap_put): Ditto.
* dirmngr/ocsp.c (do_ocsp_request): Ditto. Also pass TOR flag to the
http module.
* dirmngr/server.c (option_handler): Add "honor-keyserver-url-used".
(cmd_dns_cert): Return an error in TOR mode.
(cmd_getinfo): Add subcommand "tor"
* tools/gpgconf-comp.c (gc_options_dirmngr): Add TOR group.
--
More work is required to actually make --use-tor useful. For now it
returns an error for almost all network access but as soon as we have
added the TOR feature to the http module some parts will start to
work.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgsm-gencert.sh: remove deprecated script entirely. It is
fully replaced by gpgsm --gen-key
* doc/tools.texi: remove gpgsm-gencert.sh documentation
* .gitignore: no longer ignore gpgsm-gencert.sh manpage
* doc/Makefile.am: quit making the manpage
* tools/Makefile.am: quit distributing the script
* doc/howto-create-a-server-cert.texi: overhaul documentation to use
gpgsm --gen-key and tweak explanations
--
The commit deprecating gpgsm-gencert.sh
(81972ca7d5) dates back exactly 6 years.
https://codesearch.debian.net/results/gpgsm-gencert.sh
suggests that in all of debian it is only referenced in documentation
(for poldi and scute) and example files (libept), and isn't actually
used directly anywhere.
Furthermore, trying to use gpgsm-gencert.sh to make a simple webserver
certificate-signing request failed for me, following the examples in
doc/howto-create-a-server-cert.texi exactly.
It's time we ripped off this band-aid :)
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/agent.h (opt): Add field allow_emacs_pinentry.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oAllowEmacsPinentry): New.
(opts): Add option --allow-emacs-pinentry.
(parse_rereadable_options): Set this option.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add new option.
--
gpgconf-comp and manual entry added by wk.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For unknown reason I used the term MOSS for an RFC1847 structure.
MOSS is a historic and broken security format for MIME define in 1848.
To avoid misunderstandings this patch changes the term to SMFM which
stands for Security Multiparts for MIME (rfc-1847).
* agent/agent.h (opt): Add field allow_external_cache.
* agent/call-pinentry.c (start_pinentry): Act upon new var.
* agent/gpg-agent.c (oNoAllowExternalCache): New.
(opts): Add option --no-allow-external-cache.
(parse_rereadable_options): Set this option.
--
Pinentry 0.9.2 may be build with libsecret support and thus an extra
checkbox is displayed to allow the user to get passwords out of an
libsecret maintained cache. Security aware user may want to avoid
this feature and may do this at runtime by enabling this option.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.h: Rename JNLIB_LOG_* to GPGRT_LOG_*.
* common/mischelp.h: Rename JNLIB_GCC_* to GPGRT_GCC_*.
--
JNLIB has no more meaning. Thus we switch to a GPGRT_ prefix in
anticipation that some code may eventually be moved to libgpg-error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/rfc822parse.c (parse_field): Replace break by goto.
--
Brown paper bag bug: Changing an IF to a WHILE inside another loop
requires to fix the inner break.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/rfc822parse.c (parse_field): Loop after continuation line.
--
Using header lines like
Name:[lf]
[space][lf]
[lf]
resulted in running into the "(s2 = strchr (delimiters2, *s)" branch
and inserting a new token for the empty continuation line. This also
led to one byte read after the string which is what Hanno figured.
The new code should handle empty continuation lines correct.
Reported-by: Hanno Böck
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-extract.c (extract_regular): Handle size multiples
of RECORDSIZE.
--
If a hdr->size was a multiple of 512 the last record would
not have been written and the files corrupted accordingly.
GnuPG-bug-id: 1926
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
Changed to use only if-else.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (option_check_validity): Enable check for
UINT32.
--
Reported-by: Günther Noack <gnoack@google.com>
This is actually a bug which inhibited the checking of values of type
UINT32.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgkey2ssh.c (key_to_blob) : ensure that va_end is called.
--
stdarg(3) says:
Each invocation of va_start() must be matched by a
corresponding invocation of va_end() in the same function.
Observed by Joshua Rogers <honey@internot.info>
Debian-Bug-Id: 773415
* configure.ac (AC_CHECK_HEADERS): Check for sys.select.h
* tools/watchgnupg.c: Include it.
--
It seems http://www.musl-libc.org/ is quite limited and requires
the use sys/select.h instead of unistd.h et al.
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/Makefile.am: Avoid $(DNSLIBS) for dirmngr_ldap
* g10/Makefile.am: $(LIBREADLINE) is only for gpg2; gpgv2 does not
need $(LIBASSUAN_LIBS)
* sm/Makefile.am: gpgsm does not need $(ZLIBS)
* tools/Makefile.am: gpgconf does not need $(NPTH_LIBS)
--
In the course of building GnuPG 2.1.0 beta864 on debian, i found that
several of the installed executables were linked to libraries that
they did not need to be linked to, which would cause unnecessary
package dependencies at runtime.
The changeset here removes these unnecessary libraries from linking.
Something similar could possibly also be done by passing --as-needed
to the linker, but trimming the depenencies seems more parsimonious.
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* common/estream.c (es_freopen): Remove useless check for STREAM.
* kbx/keybox-blob.c (_keybox_create_x509_blob): Remove useless check
for BLOB.
* tools/sockprox.c (run_proxy): Do not fclose(NULL).
--
Found by Hans-Christoph Steiner with cppcheck.
* agent/gpg-agent.c (opts, main): Add option --no-allow-mark-trusted.
Put this option into the gpgconf-list.
(main): Enable opt.allow_mark_trusted by default.
* tools/gpgconf-comp.c (gc_options_gpg_agent): Replace
allow-mark-trusted by no-allow-mark-trusted.
* agent/trustlist.c (agent_marktrusted): Always set the "relax" flag.
--
These changes have been in effect for the Gpg4win Windows version
since 2011-01-24 and thus first released with Gpg4win 2.1.0. Given
the current state of PKIX it does not make any sense to lure the Unix
user into false security by making it harder to trust self-signed or
CAcert certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 90b419f3e9)
Resolved conflicts:
NEWS
agent/gpg-agent.c
* agent/gpg-agent.c [W32]: Include Several Windows header.
(opts): Change help text for enable-ssh-support.
(opts, main): Add option --enable-putty-support
(putty_support, PUTTY_IPC_MAGIC, PUTTY_IPC_MAXLEN): New for W32.
(agent_init_default_ctrl): Add and asssert call.
(putty_message_proc, putty_message_thread): New.
(handle_connections) [W32]: Start putty message thread.
* common/sysutils.c (w32_get_user_sid): New for W32 only
* tools/gpgconf-comp.c (gc_options_gpg_agent): Add
--enable-ssh-support and --enable-putty-support. Make the
configuration group visible at basic level.
* agent/command-ssh.c (serve_mmapped_ssh_request): New for W32 only.
--
This patch enables support for Putty. It has been tested with Putty
0.62 using an Unix created ssh key copied to the private-keys-v1.d
directory on Windows and with a manually crafted sshcontrol file. It
also works with a smartcard key.
May thanks to gniibe who implemented a proxy in Python to test the
putty/gpg-agent communication.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 9f32499f99)
Resolved conflicts:
NEWS
agent/agent.h
agent/gpg-agent.c: Convert from pth to npth.
common/sysutils.c
common/sysutils.h
* g10/photoid.c (show_photos) [DISABLE_PHOTO_VIEWER]: Mark args as
unused.
* tools/gpgconf-comp.c (my_dgettext): Mark DOMAIN as unused if NLS is
not configured.
* tools/gpgsplit.c [!HAVE_ZLIB]: Do not include zlib.h.
(handle_zlib): Build only if HAVE_ZLIB is defined.
(write_part): Support zlib and zip only if HAVE_ZLIB is defined.
Signed-off-by: Werner Koch <wk@gnupg.org>
