* g10/parse-packet.c (enum_sig_subpkt): Print a hexdump.
--
A test key for this is 02DF08F5FD356BF27F5F7B838921B5DCCD15A883 .
A key listing in verbose mode will now yield
gpg: DBG: buffer shorter than subpacket (10/9/25);\
dump: 19100d87e54973647cff
The error here is that the packet length is 0x19 but what follows is a
long keyid (subpacket 16) which is shorter. The debug output might be
helpful to better analyze broken signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Don't use agent_scd_cardlist and
agent_scd_serialno, but agent_scd_keyinfo.
--
When there are multiple cards/tokens, this change can avoid switching
card of foreground access.
GnuPG-bug-id: 4784
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/sysutils.c (inhibit_set_foregound_window): New var.
(gnupg_inhibit_set_foregound_window): New func.
(gnupg_allow_set_foregound_window): Use var.
* g10/gpg.c (main): Inhibit in loopback mode.
* sm/gpgsm.c (main): Ditto.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (open_card_with_request): Use NULL instead of
APPTYPE_NULL.
--
Using the enum is wrong because a string is expected. However it did
harm anything because the value of the enum is 0 and thus equivalent
to NULL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_one): Probe for a secret key in --with-secret
mode.
--
In contrast to list_all(), list_one() did not tests for a secret key
and took MARK_TRUSTED verbatim as an indication for "secret key
available".
GnuPG-bug: 4061
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/server.c (proc_wkd_get): Print new NOTE status
"wkd_cached_result".
* g10/call-dirmngr.c (ks_status_cb): Detect this and print a not ein
verbose mode.
--
This little patch is helpful to see why a WKD change still does not
work after it has been updated on the server.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_byname): Extend is_mbox checking.
(get_best_pubkey_byname): Ditto.
--
With this patch it is now possible to use
gpg -e -r '<foo@example.org>'
and auto key locate will find the key. Without that a plain mail
address; i.e.
gpg -e -r 'foo@example.org'
was required.
GnuPG-bug-id: 4726
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.h (MAX_FORMATTED_FINGERPRINT_LEN): Increase by one.
* g10/keyid.c (format_hexfingerprint): Change v5 key formatting.
--
The new format are groups of 5 letters to resemble the CW speed
measurement rules. Many hams are used to such blocks from their CW
lessons. Note that there is no double blank in the middle as with the
v4 keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-keyboxd.c (struct store_parm_s): New.
(store_inq_cb): New.
(keydb_update_keyblock): Implement the keyboxd part.
(keydb_insert_keyblock): Ditto.
(keydb_delete_keyblock): Ditto.
(keydb_search_reset): Clear ubid flag. Also use the correct union
member for building the search string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (UBID_LEN): New. Use it at all places.
* kbx/keybox-blob.c (create_blob_finish): Do not write the UBID item.
* kbx/keybox-dump.c (print_ubib): Remove.
(_keybox_dump_blob): Do not print the now removed ubid flag.
* kbx/keybox-search-desc.h (struct keydb_search_desc): Use constants
for the size of the ubid and grip.
* kbx/keybox-search.c (blob_cmp_ubid): New.
(has_ubid): Make it a simple wrapper around blob_cmp_ubid.
(keybox_get_data): Add arg 'r_ubid'.
* kbx/frontend.h (enum kbxd_store_modes): New.
* kbx/kbxserver.c (cmd_store): Add new option --insert.
* kbx/backend-cache.c (be_cache_initialize): New.
(be_cache_add_resource): Call it here.
* kbx/backend-kbx.c (be_kbx_seek): Remove args 'fpr' and 'fprlen'.
(be_kbx_search): Get the UBID from keybox_get_data.
* kbx/backend-support.c (be_fingerprint_from_blob): Replace by ...
(be_ubid_from_blob): new. Change all callers.
* kbx/frontend.c (kbxd_add_resource): Temporary disable the cache but
use the new cache init function.
(kbxd_store): Replace arg 'only_update' by 'mode'. Seek using the
ubid. Take care of the mode.
--
It turned out that using the hash of the entire blob was not helpful.
Thus we redefine the Unique-Blob-ID (UBID) as the primary fingerprint
of the blob. In case this is a v5 OpenPGP key a left truncated
version of the SHA-256 hash is used; in all other cases the full SHA-1
hash. Using a SHA-256 hash does not make sense because v4 keys are
and will for some time be the majority of keys and thus padding them
with zeroes won't make any difference. Even if fingerprint collisions
can eventually be created we will assume that the keys are bogus and
that it does not make sense to store its twin also in our key storage.
We can also easily extend the update code to detect a collision and
reject the update.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/DETAILS: Specify new status code "NOTE".
* dirmngr/ks-engine-http.c (ks_http_fetch): Print a NOTE status for a
bad TLS certificate.
* g10/call-dirmngr.c (ks_status_cb): Detect this status.
--
For example a
gpg -v --locate-external-keys dd9jn@posteo.net
now yields
gpg: Note: server uses an invalid certificate
gpg: (further info: bad cert for 'posteo.net': \
Hostname does not match the certificate)
gpg: error retrieving 'dd9jn@posteo.net' via WKD: Wrong name
gpg: error reading key: Wrong name
(without -v the "further info" line is not shown). Note that even
after years Posteo is not able to provide a valid certificate for
their .net addresses. Anyway, this help to show the feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/http.c: Include dirmngr-status.h
(http_prepare_redirect): Emit WARNING status lines for redirection
problems.
* dirmngr/http.h: Include fwddecl.h.
(struct http_redir_info_s): Add field ctrl.
* dirmngr/ks-engine-hkp.c (send_request): Set it.
* dirmngr/ks-engine-http.c (ks_http_fetch): Set it.
* g10/call-dirmngr.c (ks_status_cb): Detect the two new warnings.
--
This should make it easier to diagnose problems with bad WKD servers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one_real): Don't do the final clean in the
merge case.
--
This fixes a regression introduced with self-sigs-only.
GnuPG-bug-id: 4628
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (pubkey_cmp): Handle a primary key with
PUBKEY_USAGE_ENC, and make sure new key is for encryption.
(get_best_pubkey_byname): Add comment for ranking.
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_best_pubkey_byname): Always use PK0 to search
by get_pubkey_byname. Add initial call to pubkey_cmp to fill
BEST at first before the loop.
--
Fixes-commit: 44604209c1
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_best_pubkey_byname): After the call of
get_pubkey_byname, set up CTX with KEYDB_SEARCH_MODE_LONG_KID to enter
the loop.
--
Fixes-commit: 7535f1d47a
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_best_pubkey_byname): Handle the first key
as the initial candidate for the selection.
--
GnuPG-bug-id: 4713
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/sig-check.c (check_signature_over_key_or_uid): No cut-off date
and remove debug output.
--
With 2.2 we do not not support SHA-1 key signatures anymore even if
that means that the WoT shrinks.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb-private.h (struct keydb_handle_s): Add fields for UBID.
* g10/call-keyboxd.c (search_status_cb): New.
(keydb_search): Set new UBID fields.
--
The UBID is not yet used but may come handy later.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_retrieval_screener): Compare against
actual length.
--
This was a long standing and annoying regression due to changes
for v5 keys. Really simple to fix :-).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/expand-group.c (expand_group): Add arg prepend_input.
* g10/pkclist.c (build_pk_list): Adjust for it.
* g10/getkey.c (key_byname): Keep the expanded names in the CTX and
don't premature free them.
(get_pubkey_byname): Append the namelist to the extra_list.
--
The original patch didn't kept the expanded list in the context and
also would duplicate names which are not group names. The latter does
not really harm but the former lead to a use after free. Original
patch was applied just a few weeks ago.
Fixes-commit: e825aea2ba
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Resolved Conflicts:
* common/asshelp.c: Keep the new code in master for spawing under
Windows.
* g10/Makefile.am: Keep all new file.
* g10/photoid.c: Pass CTRL to pct_expando.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/Makefile.am: Add nPth flags.
* g10/gpg.c: Include npth.h.
(gpg_deinit_default_ctrl): Deinit call-keyboxd local data.
(main): Init nPth.
* g10/keydb-private.h (struct keydb_handle_s): Add field 'kbl' and
remove the search result and the assuan context.
* g10/call-keyboxd.c (struct keyboxd_local_s): Add more fields.
(lock_datastream, unlock_datastream): New.
(gpg_keyboxd_deinit_session_data): Adjust for changed data structures.
(prepare_data_pipe): New.
(open_context): Return kbl instead of an Assuan context. Init mutexes
etc.
(close_context): Merge into ...
(keydb_release): here. Adjust for changed data structures.
(datastream_thread): New.
(keydb_get_keyblock): Implement datastream stuff.
(keydb_search): Ditto.
* common/asshelp.c (wait_for_sock): Add arg connect_flags.
(start_new_service): Set FDPASSING flag for the keyboxd.
--
This code as a lot of rough edges, in particular it relies on a well
behaving keyboxd. We need to add code to shutdown the datastream
reader thread in case of errors and to properly get it up again. We
also need to make really sure that both threads run in lockstep so
that the datastream thread is only active while we are sending a
command to the keyboxd.
We should also see whether we can depend nPth initialization on the
--use-keyboxd option to avoid any problems with nPth.
And we need to test on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oUseKeyboxd,oKeyboxdProgram): New consts.
(opts): New options --use-keyboxd and --keyboxd-program.
(main): Implement them.
* g10/keydb.c: Move some defs out to ...
* g10/keydb-private.h: new file.
* g10/keydb.c: prefix function names with "internal" and move original
functions to ...
* g10/call-keyboxd.c: new file. Divert to the internal fucntion if
--use-keyboxd is used. Add a CTRL arg to most fucntions and change
all callers.
* g10/Makefile.am (common_source): Add new files.
(noinst_PROGRAMS): Do bot build gpgcompose.
--
Note that this is just the framework with only a basic implementation
of searching via keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/expand-group.c: New
* g10/pkclist.c: Extract expand_group and expand_id into expand-group.c.
* g10/keydb.h: Add prototypes of expand_id and expand_group.
* g10/getkey.c: Use expand_group before resolving key references.
* g10/Makefile.am: Compile expand-group.c.
--
When searching a key by its name, try to expand the provided name in
case it is a GPG group reference. This GPG group resolution is performed
before the individual keys are verified.
This allows key listing using a GPG group reference. In particular, this
modification fixes the encryption to group support in KDE's Kmail which
is broken since version 18.04.
Signed-off-by: Stephan Mueller <stephan.mueller@atsec.com>
- Changed new filename to use a dash instead of an underscore.
- Indendation changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_ATTST_SIGS): New.
* g10/keydb.h (IS_ATTST_SIGS): New.
(IS_CERT): Include the new one.
* g10/sign.c (mk_notation_policy_etc): Do not put notations into
attestation key signatures.
* g10/parse-packet.c (dump_sig_subpkt): Add new arg digest_algo.
Print the attestation sigs.
(parse_one_sig_subpkt): Support SIGSUBPKT_ATTST_SIGS.
(can_handle_critical): Ditto.
(enum_sig_subpkt): Pass digest algo to dump_sig_subpkt.
--
This change allows to list the new subpacket with --list-packets.
Example output:
:signature packet: algo 22, keyid C694723A1370EAB1
version 4, created 1567097576, md5len 0, sigclass 0x16
digest algo 8, begin of digest ff 0c
hashed subpkt 2 len 4 (sig created 2019-08-29)
hashed subpkt 37 len 32 (attst-sigs: 1
A794C6E9CCFE2F34C67E07[...])
hashed subpkt 33 len 21 (issuer fpr v4 156A3872[...])
subpkt 16 len 8 (issuer key ID C694723A1370EAB1)
data: [256 bits]
data: [256 bits]
GnuPG-bug-id: 4694
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (enum_sig_subpkt): Replace first arg by two args
so that the entire signature packet is available. Change all callers.
(parse_sig_subpkt): Ditto.
--
This patch is a prerequisite to support the new attestation key
signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Call keybox_compress.
* sm/keydb.c (keydb_add_resource): Release the lock after a compress.
--
Note that in gpgsm we already did the compress run but we didn't
released the lock on the file. This might have been a reason for some
strange hangs.
GnuPG-bug-id: 4644
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (akl_empty_or_only_local): New.
* g10/gpg.c (DEFAULT_AKL_LIST): New.
(main): Use it here.
(main) <aLocateExtKeys>: Set default AKL if none is set.
--
This better matches the expectations of the user. The used list in
this case is the default list ("local,wkd") with local ignored by the
command anyway.
GnuPG-bug-id: 4662
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (glo_ctrl): Add flag silence_parse_warnings.
* g10/keylist.c (list_all): Set that during secret key listsings.
* g10/parse-packet.c (unknown_pubkey_warning): If new flag is set do
not print info message normally emitted inh verbose mode.
(can_handle_critical_notation, enum_sig_subpkt): Ditto.
(parse_signature, parse_key, parse_attribute_subpkts): Ditto.
--
Those messages are annoying because they might be emitted due to
parsing public keys which are latter not shows because the secret part
is missing. No functional regressions are expected because --verbose
should not change anything.
Note that this suppression is only done if no arguments are given to
the command; that is if a listing of the entire keyring is requested.
Thus to see the earnings anyway, a listing of a single or group of
keys can be requested.
GnuPG-bug-id: 4627
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (verify_own_keys): Silence informational diagnostic.
--
This silences these notes with --quiet
gpg: Note: RFC4880bis features are enabled.
gpg: key EE65E8C75D41FD1D marked as ultimately trusted
GnuPG-bug-id: 4634
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_part): Add arg R_KEYGRIP and
support the special algo "card".
(parse_key_parameter_string): Add args R_KEYGRIP and R_SUBKEYGRIP.
Handle the "card" algo. Adjust callers.
(parse_algo_usage_expire): Add arg R_KEYGRIP.
(quickgen_set_para): Add arg KEYGRIP and put it into the parameter
list.
(quick_generate_keypair): Handle algo "card".
(generate_keypair): Also handle the keygrips as returned by
parse_key_parameter_string.
(ask_algo): Support ed25519 from a card.
--
Note that this allows to create a new OpenPGP key from an initialized
OpenPGP card or from any other supported cards. It has been tested
with the TCOS Netkey card. Right now a stub file for the cards might
be needed; this can be achieved by running "gpgsm --learn" with the
card plugged in.
Example:
gpg --quick-gen-key foo@example.org card
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_algo): Identify the standard keys.
--
The asterisks mark the usages of a key as retruned by scd via the
$AUTHKEYID et al. attributes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (opts): Add option.
(main): Set flag.
* g10/options.h: Add flags.use_only_openpgp_card.
* g10/call-agent.c (start_agent): Implement option.
--
With the previous patch we switch to autoselect an application
instead of requesting an openpgp card. This option allows to revert
this in case of use use cases which expected the former behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit c185f6dfbd)
This was first added to the 2.2 branch.
* g10/mainproc.c (proc_encrypted): Report status of STATUS_NO_SECKEY
only when some error occurred.
--
Fixes-commit: 6cc4119ec0
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-agent.c (agent_pkdecrypt): accept but do not require
NUL-terminated data from the agent.
* sm/call-agent.c (gpgsm_agent_pkdecrypt): accept but do not require
NUL-terminated data from the agent.
GnuPG-bug-id: 4652
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/photoid.c (exec_write, exec_read, exec_finish): Remove.
(setup_input_file): Rename from make_tempdir.
(expand_args): Drop support of 'o' and 'O'.
(fill_command_argv, run_with_pipe, create_temp_file) New.
(show_photo): New with gnupg_spawn_process_fd and gnupg_wait_process.
(show_photos): Call show_photo.
GnuPG-bug-id: 4362
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/dek.h (DEK): Use debugger friendly type of unsigned int.
* g10/mainproc.c (symkey_decrypt_seskey): Add another check.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Only call get_session_key when
PKENC_LIST is not NULL.
Return GPG_ERR_BAD_KEY, instead of GPG_ERR_NO_SECKEY, when
it's encrypted only by symmetric key.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/import.c (read_block): Make sure KEYID is availabale also on a
pending packet.
--
Reported-by: Phil Pennock
Fixes-commit: 2e349bb617
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (check_sig_and_print): Print a hint on how to make
use of the preferred keyserver. Remove keyserver lookup just by the
keyid. Try a WKD lookup before a keyserver lookup.
--
The use of the the keyid for lookups does not make much sense anymore
since for quite some time we do have the fingerprint as part of the
signature.
GnuPG-bug-id: 4595
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Check ->result against -1.
When c->dek == NULL, put GPG_ERR_NO_SECKEY only when not set.
* g10/pubkey-enc.c (get_session_key): Set k->result by the result of
get_it.
When no secret key is available for some reasons, return the last
specific error, if any.
GnuPG-bug-id: 4561
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (main): Change default.
--
Due to the DoS attack on the keyeservers we do not anymore default to
import key signatures. That makes the keyserver unsuable for getting
keys for the WoT but it still allows to retriev keys - even if that
takes long to download the large keyblocks.
To revert to the old behavior add
keyserver-optiions no-self-sigs-only,no-import-clean
to gpg.conf.
GnuPG-bug-id: 4607
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_byname): Add special traeatment for default
and skipped-local.
--
This change avoids error message like
gpg: error retrieving 'foo@example.org' via None: No public key
A 'None' mechanism is something internal.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aLocateExtKeys): New.
(opts): Add --locate-external-keys.
(main): Implement that.
* g10/getkey.c (get_pubkey_byname): Implement GET_PUBKEY_NO_LOCAL.
(get_best_pubkey_byname): Add arg 'mode' and pass on to
get_pubkey_byname. Change callers.
* g10/keylist.c (public_key_list): Add arg 'no_local'.
(locate_one): Ditto. Pass on to get_best_pubkey_byname.
--
This new command is a shortcut for
--auto-key-locate nodefault,clear,wkd,... --locate-key
and uses the default or configured AKL list but does so without local.
See also
GnuPG-bug-id: 4599
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (enum get_pubkey_modes): New.
* g10/getkey.c (get_pubkey_byname): Repalce no_akl by a mode arg and
change all callers.
--
This change prepares the implementation of GET_PUBKEY_NO_LOCAL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): Rename to ...
(import_one_real): this. Do not print and update stats on keyring
write errors.
(import_one): New. Add fallback code.
--
GnuPG-bug-id: 4591
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_SELF_SIGS_ONLY): New.
* g10/import.c (parse_import_options): Add option "self-sigs-only".
(read_block): Handle that option.
--
This option is intended to help against importing keys with many bogus
key-signatures. It has obvious drawbacks and is not a bullet-proof
solution because a self-signature can also be faked and would be
detected only later.
GnuPG-bug-id: 4591
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c: Change arg 'with_meta' to 'options'. Change callers.
--
This chnage allows to pass more options to read_block.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Block all signals before calling
emergency_cleanup.
--
There is a race condition here which results crash of the process.
When a signal is delivered in emergency_cleanup, it is called again.
This change fixes the problem.
GnuPG-bug-id: 2747
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tofu.c: Removed some translation markups which either make no
sense or are not possble.
--
Error message which are not helpful for the user but indicate a
problem of the installation or the code do not need a translation.
The translator may not understand them correctly and the use support
can't immediately locate the problem because it needs to be reverse
translated.
There is also one case where certain grammar constructs are
assumed (concatenating parts of a sentence at runtime). Better do not
translate that than getting weird sentences.
* common/userids.c (classify_user_id): Do not set the EXACT flag in
the default case.
* g10/export.c (exact_subkey_match_p): Make static,
* g10/delkey.c (do_delete_key): Implement subkey only deleting.
--
GnuPG-bug-id: 4457
* g10/keydb.c (parse_keyblock_image): Treat invalid packet special.
--
This is in particular useful to run --list-keys on a keyring with
corrupted packets. The extra flush is to keep the diagnostic close to
the regular --list-key output.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c: Move max packet lengths constants to ...
* g10/packet.h: ... here.
* g10/build-packet.c (do_user_id): Return an error if too data is too
large.
* g10/keygen.c (write_uid): Return an error for too large data.
--
This can lead to keyring corruption becuase we expect that our parser
is abale to parse packts created by us. Test case is
gpg --batch --passphrase 'abc' -v \
--quick-gen-key $(yes 'a'| head -4000|tr -d '\n')
GnuPG-bug-id: 4532
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/delkey.c (do_delete_key): Don't delete the keyblock on dry runs.
Do not clear the ownertrust. Do not let the agent delete the key.
--
Co-authored-by: Matheus Afonso Martins Moreira
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Add flags.dummy_outfile.
* g10/decrypt.c (decrypt_message): Set this global flag instead of the
fucntion local flag.
* g10/plaintext.c (get_output_file): Ignore opt.output if that was
used as a dummy option aslong with --use-embedded-filename.
--
The problem here was that an explicit specified --decrypt, as
meanwhile suggested, did not work with that dangerous
--use-embedded-filename. In contrast it worked when gpg decrypted as
a side-effect of parsing the data.
GnuPG-bug-id: 4500
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/exec.c (w32_system): Add "!ShellExecute" special.
* g10/photoid.c (get_default_photo_command): Use the new ShellExecute
under Windows and fallbac to 'display' and 'xdg-open' in the Unix
case.
(show_photos): Flush stdout so that the output is shown before the
image pops up.
--
For Unix this basically syncs the code with what we have in gpg 1.4.
Note that xdg-open may not be used when running as root which we
support here.
For Windows we now use ShellExecute as this seems to be preferred over
"cmd /c start"; however this does not solve the actual problem we had
in the bug report. To solve that problem we resort to a wait
parameter which defaults to 400ms. This works on my Windows-10
virtualized test box. If we can figure out which simple viewers are
commonly installed on Windows we should enhance this patch to test for
them.
GnuPG-bug-id: 4334
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (cleartext_secret_key_to_openpgp): ignore trailing
sublists in private-key S-expression.
--
When gpg-agent learns about a private key from its ssh-agent
interface, it stores its S-expression with the comment attached. The
export mechanism for OpenPGP keys already in cleartext was too brittle
because it would choke on these comments. This change lets it ignore
any additional trailing sublists.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Gnupg-Bug-Id: 4490
* kbx/keybox-init.c (keybox_lock): New arg TIMEOUT. Change all
callers to pass -1 when locking.
* sm/keydb.c (struct resource_item): Remove LOCKANDLE.
(struct keydb_handle): Add KEEP_LOCK.
(keydb_add_resource): Use keybox locking instead of a separate dotlock
for testing whether we can run a compress.
(keydb_release): Reset KEEP_LOCK.
(keydb_lock): Set KEEP_LOCK.
(unlock_all): Take care of KEEP_LOCK.
(lock_all): Use keybox_lock instead of dotlock fucntions.
(keydb_delete): Remove arg UNLOCK.
* sm/delete.c (delete_one): Adjust keydb_delete. Due to the KEEP_LOCK
the keydb_release takes care of unlocking.
--
This aligns the code more with g10/keydb.c and avoids the separate
calls to dotlock_take.
GnuPG-bug-id: 4505
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_search): Remove a specialized error
message.
--
Dirmngr comes with a default keyserver and the suggestion to use
gpg --keyserver
is not good because that option is deprecated. An error message
"No keyserver available" is sufficient.
GnuPG-bug-id: 4512
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (update_keysig_packet): Convert digest algo when needed.
--
Several gpg commands try to keep most properties of a key signature
when updating (i.e. creating a new version of a key signature). This
included the use of the current hash-algorithm. This patch changes
this so that SHA-1 or RMD160 are replaced by SHA-256 if
possible (i.e. for RSA signatures). Affected commands are for example
--quick-set-expire and --quick-set-primary-uid.
GnuPG-bug-id: 4508
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (make_keysig_packet): Remove obsolete arg diegst_algo
which was always passed as 0. Change all callers.
* g10/gpgcompose.c (signature): Warn when trying to set a digest algo.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_signature): Take only rthe addrspec from a
Signer's UID subpacket.
--
This is to address a problem in the currentr OpenKeychain which put
the entire UID into the subpacket. For example our Tofu code can only
use the addrspec and not the entire UID.
Reported-by: Wiktor Kwapisiewicz <wiktor@metacode.biz>
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.c (opts): New options --authenticode and --attribute.
* sm/gpgsm.h (opt): Add vars authenticode and attribute_list.
* sm/sign.c (add_signed_attribute): New but inactive.
(gpgsm_sign): Use new options.
--
Because libksba 1.4 is not yet ready the new code is not yet active.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Set new.uid always
to NULL after use.
--
pubkey_cmp is not guranteed to set new.uid.
So if the diff < 0 case is reached best is set to new.
If then diff > 0 is reached without modifying new.uid
e.g. if the key has no matching mboxes. new.uid is
free'd even though the uid is still referenced in
best.
GnuPG-Bug-Id: T4462
* g10/objcache.c: New.
* g10/objcache.h: New.
* g10/Makefile.am (common_source): Add them.
* g10/gpg.c: Include objcache.h.
(g10_exit): Call objcache_dump_stats.
* g10/getkey.c: Include objcache.h.
(get_primary_uid, release_keyid_list): Remove.
(cache_user_id): Remove.
(finish_lookup): Call the new cache_put_keyblock instead of
cache_user_id.
(get_user_id_string): Remove code for mode 2.
(get_user_id): Implement using cache_get_uid_bykid.
--
This generic caching module is better than the ad-hoc code we used in
getkey.c. More cleanup in getkey is still required but it is a
start. There is also a small performance increase with the new cache:
With a large keyring and --list-sigs I get these numbers:
| | before | after |
|------+------------+------------|
| real | 14m1.028s | 12m16.186s |
| user | 2m18.484s | 1m36.040s |
| sys | 11m42.420s | 10m40.044s |
Note the speedup in the user time which is due to the improved cache
algorithm. This is obvious, because the old cache was just a long
linked list; the new cache are two hash tables.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_public_key): Add fields fpr and fprlen.
* g10/keyid.c (do_fingerprint_md): Remove.
(compute_fingerprint): New.
(keyid_from_pk): Simplify.
(fingerprint_from_pk): Simplify.
(hexfingerprint): Avoid using extra array.
--
This is similar to what we are doing with the keyid for a long time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_wkd): Clear NO_ARMOR.
--
We may even adjust the specs to allow that. It should not be a
problem for any OpenPGP implementation because armored keys are very
common and de-armoring code is de-facto a mandatory feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import): Limit the number of considered keys to 5.
(import_one): Return the first fingerprint in case of WKD.
--
The Web Key Directory should carry only one key. However, some
providers like to put old or expired keys also into the WKD. I don't
thunk that this is a good idea but I heard claims that this is needed
for them to migrate existing key data bases.
This patch puts a limit on 5 on it (we had none right now) and also
fixes the issue that gpg could not work immediately with the requested
key because the code uses the fingerprint of the key to use the
imported key. Now the first key is used. On a second try (w/o
accessing the WKD) the regular key selection mechanism would be in
effect. I think this is the most conservative approach. Let's see
whether it helps.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (struct keyid_list): Add field fprlen.
(cache_user_id): Set and test it.
(get_user_id_byfpr): Make static, add arg fprlen and use it.
(get_user_id_byfpr_native): Add arg fprlen and change all callers.
--
This was a regression in the 2.3 base.
GnuPG-bug-id: 3801
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_keypairinfo): Add arg 'keyref'.
* g10/keygen.c (ask_algo): Adjust.
* g10/skclist.c (enum_secret_keys): Request the keyref directly.
--
This improves commit ec6a677923 to avoid
looping over all keypairinfos. This way scdaemon does not need to
compute all the keypairinfos for all keys of a card. This patch is
possible due the enhanced READKEY command in scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (struct getattr_one_parm_s): New.
(getattr_one_status_cb): New.
(agent_scd_getattr_one): New.
* g10/pubkey-enc.c (get_it): Allow the standard leading zero byte from
pkcs#1.
* g10/skclist.c (enum_secret_keys): Handle non-OpenPGP cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_keypairinfo): Use --keypairinfo.
* sm/call-agent.c (gpgsm_agent_scd_keypairinfo): Ditto.
* scd/app-openpgp.c (do_getattr): Add attributes "$ENCRKEYID" and
"$SIGNKEYID".
* scd/app-piv.c (do_getattr): Ditto.
--
We already have $AUTHKEYID to locate the keyref of the key to be used
with ssh. It will also be useful to have default keyref for
encryption and signing. For example, this will allow us to repalce
the use of "OPENPGP.2" by a app type specific keyref.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Move list forward on error.
--
The error is not easy to reproduce but may occur if a card is removed
at the wrong time. Tested by changing the code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (print_pkenc_list): Simplify.
--
This changes the output from
# ------------------------ >8 ------------------------
gpg: encrypted with 2048-bit RSA key, ID D20073D46DF6C97D, created 2019-04-02
"Test with PIV card"
to
gpg: encrypted with rsa2048 key, ID D20073D46DF6C97D, created 2019-04-02
"Test with PIV card"
Signed-off-by: Werner Koch <wk@gnupg.org>
# ------------------------ 8< ------------------------
* g10/call-agent.c (agent_scd_readkey): New.
* g10/keygen.c (ask_key_flags): Factor code out to ..
(ask_key_flags_with_mask): new.
(ask_algo): New mode 14.
--
Note that this new menu 14 is always displayed. The usage flags can
be changed only in --expert mode, though. Creating and using signing
keys works but decryption does not yet work; we will need to tweak a
couple of other places for that. Tested with a Yubikey's PIV app.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (scd_keypairinfo_status_cb): Also store the usage
flags.
* sm/call-agent.c (scd_keypairinfo_status_cb): Ditto.
* sm/certreqgen-ui.c (gpgsm_gencertreq_tty): Print the usage flags.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (start_agent): Use card app auto selection.
* g10/card-util.c (current_card_status): Print the Application type.
(card_status): Put empty line between card listings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (ask_curve): Change algo ID to ECDSA if it changed from
an EdDSA curve.
--
This change matters when it is called from ask_card_keyattr.
Some-comments-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/import.c (NODE_TRANSFER_SECKEY): New.
(import): Add attic kludge.
(transfer_secret_keys): Add arg only_marked.
(resync_sec_with_pub_keyblock): Return removed seckeys via new arg
r_removedsecs.
(import_secret_one): New arg r_secattic. Change to take ownership of
arg keyblock. Implement extra secret key import logic. Factor some
code out to ...
(do_transfer): New.
(import_matching_seckeys): New.
--
The PGP desktops exported secret keys are really stupid. And they
even a have kind of exception in rfc4880 which does not rule that
out (section 11.2):
[...] Implementations SHOULD include self-signatures on any user
IDs and subkeys, as this allows for a complete public key to be
automatically extracted from the transferable secret key.
Implementations MAY choose to omit the self-signatures, especially
if a transferable public key accompanies the transferable secret
key.
Now if they would only put the public key before the secret
key. Anyway we now have a workaround for that ugliness.
GnuPG-bug-id: 4392
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (struct kbnode_struct): Replace unused field RECNO by
new field TAG.
* g10/kbnode.c (alloc_node): Change accordingly.
* g10/import.c (import_one): Add arg r_valid.
(sec_to_pub_keyblock): Set tags.
(resync_sec_with_pub_keyblock): New.
(import_secret_one): Change return code to gpg_error_t. Return an
error code if sec_to_pub_keyblock failed. Resync secret keyblock.
--
When importing an invalid secret key ring for example without key
binding signatures or no UIDs, gpg used to let gpg-agent store the
secret keys anyway. This is clearly a bug because the diagnostics
before claimed that for example the subkeys have been skipped.
Importing the secret key parameters then anyway is surprising in
particular because a gpg -k does not show the key. After importing
the public key the secret keys suddenly showed up.
This changes the behaviour of
GnuPG-bug-id: 4392
to me more consistent but is not a solution to the actual bug.
Caution: The ecc.scm test now fails because two of the sample keys
don't have binding signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (show_basic_key_info): New arg 'print_sec'. Remove
useless code for "sub" and "ssb".
* g10/import.c (import_one): Pass FROM_SK to show_basic_key_info. Do
not print the first keyinfo in FROM_SK mode.
printing.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_printf): Escape CR and LF.
* g10/import.c (print_import_check): Simplify by using
write_status_printf and hexfingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (set_compliance_option, main): Change CO_GNUPG to include
rfc4880bis features.
(main): Change rfc4880bis warning to a note.
--
Note that the default is CO_GNUPG and not CO_OPENPGP. CO_OPENPGP does
not include rfc4880bis yet and has a couple of things we don't like,
like --allow-non-selfsigned-uids.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (gpg_mpi_write): New optional arg
R_NWRITTEN. Allow NULL for OUT. Change all callers.
(do_key): Support v5 keys.
(build_sig_subpkt_from_sig): Support 32 byte fingerprints.
* g10/parse-packet.c (parse_signature): First try to set the keyid
from the issuer fingerprint.
(parse_key): Support v5 keys.
(create_gpg_control): Better make sure to always allocate the static
size of the struct in case future compilers print warnings.
* g10/keyid.c (hash_public_key): Add v5 support.
(keyid_from_pk): Ditto.
(keyid_from_fingerprint): Ditto.
(fingerprint_from_pk): Ditto.
* g10/keygen.c (KEYGEN_FLAG_CREATE_V5_KEY): New.
(pVERSION, pSUBVERSION): New.
(add_feature_v5): New.
(keygen_upd_std_prefs): Call it.
(do_create_from_keygrip): Add arg keygen_flags and support the v5
flag.
(common_gen): Support the v5 flag.
(parse_key_parameter_part): New flags v4 and v5.
(parse_key_parameter_string): Add args for version and subversion.
(read_parameter_file): New keywords "Key-Version" and
"Subkey-Version".
(quickgen_set_para): Add arg 'version'.
(quick_generate_keypair, generate_keypair): Support version parms.
(do_generate_keypair): Support v5 key flag.
(generate_subkeypair): Ditto.
(generate_card_subkeypair): Preparse for keyflags.
(gen_card_key): Ditto.
* g10/sig-check.c (check_signature2): Add args extrahash and
extrahashlen.
(check_signature_end): Ditto.
(check_signature_end_simple): Ditto. Use them.
* g10/mainproc.c (proc_plaintext): Put extra hash infor into the
control packet.
(do_check_sig): Add args extrahas and extrahashlen and pass them on.
(issuer_fpr_raw): Support 32 byte fingerprint.
(check_sig_and_print): get extra hash data and pass it on.
--
Note that this is only basic support and requires more fine
tuning/fixing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/userids.c (classify_user_id): Support 32 byte fingerprints.
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR32): New.
(struct keydb_search_desc): Add field fprlen.
* kbx/keybox-defs.h (struct _keybox_openpgp_key_info): Add field
version and increase size of fpr to 32.
* kbx/keybox-blob.c: Define new version 2 for PGP and X509 blobs.
(struct keyboxblob_key): Add field fprlen and increase size of fpr.
(pgp_create_key_part_single): Allow larger fingerprints.
(create_blob_header): Implement blob version 2 and add arg want_fpr32.
(_keybox_create_openpgp_blob): Detect the need for blob version 2.
* kbx/keybox-search.c (blob_get_first_keyid): Support 32 byte
fingerprints.
(blob_cmp_fpr): Ditto.
(blob_cmp_fpr_part): Ditto.
(has_fingerprint): Add arg fprlen and pass on.
(keybox_search): Support KEYDB_SEARCH_MODE_FPR32 and adjust for
changed has_fingerprint.
* kbx/keybox-openpgp.c (parse_key): Support version 5 keys.
* kbx/keybox-dump.c (_keybox_dump_blob): Support blob version 2.
* g10/delkey.c (do_delete_key): Support KEYDB_SEARCH_MODE_FPR32.
* g10/export.c (exact_subkey_match_p): Ditto.
* g10/gpg.c (main): Ditto.
* g10/getkey.c (get_pubkey_byfprint): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
* g10/keydb.c (keydb_search_desc_dump): Support
KEYDB_SEARCH_MODE_FPR32 and adjust for changed KEYDB_SEARCH_MODE_FPR.
(keydb_search): Add new arg fprlen and change all callers.
* g10/keyedit.c (find_by_primary_fpr): Ditto.
* g10/keyid.c (keystr_from_desc): Ditto.
* g10/keyring.c (keyring_search): Ditto.
* g10/keyserver.c (print_keyrec): Ditto.
(parse_keyrec): Ditto.
(keyserver_export): Ditto.
(keyserver_retrieval_screener): Ditto.
(keyserver_import): Ditto.
(keyserver_import_fprint): Ditto.
(keyidlist): Ditto.
(keyserver_get_chunk): Ditto.
* g10/keydb.c (keydb_search): Add new arg fprlen and change all
callers.
* sm/keydb.c (keydb_search_fpr): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
--
This prepares the support for OpenPGP v5 keys. The new version 2 blob
format is needed for the longer fingerprints and we also use this
opportunity to prepare for storing the keygrip in the blob for faster
lookup by keygrip. Right now this is not yet functional.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (AC_CHECK_SIZEOF): Test size_t.
* g10/sig-check.c (check_signature_end_simple): Support v5 signatures
as per current rfc4880bis. For correctness also allow for N > 2^32.
* g10/sign.c (pt_extra_hash_data_t): New.
(hash_sigversion_to_magic): New arg EXTRAHASH.
(write_plaintext_packet): New arg R_EXTRAHASH.
(write_signature_packets): Pass EXTRAHASH.
(sign_file): Ditto.
(sign_symencrypt_file): Ditto.
--
Take care: The code path for v5 sigs has not yet been tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/ecdh.c (kek_params_table): Use CIPHER_ALGO_AES192 for
ECC strength 384, according to RFC-6637.
--
Reported-by: Trevor Bentley
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keylist.c (print_key_line): Print a warning for invalid algos.
--
Non-OpenPGP compliant keys now show a warning flag on the sec or pub
line like in:
gpg: can't encode a 256 bit MD into a 88 bits frame, algo=8
sec cv25519 2019-01-30 [INVALID_ALGO]
4239F3D606A19258E7A88C3F9A3F4F909C5034C5
uid [ultimate] ffffff
Instead of showing the usage flags "[CE]". Without this patch only
the error message is printed and the reason for it was not immediately
obvious (cv25519 is encryption only but we always consider the primary
key as having the "C" flag).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (map_pk_gcry_to_openpgp): Add EdDSA mapping.
--
Due to this missing mapping a "gpg --export --full-gen-key" with
selection "13 - Existing key" did not worked for an ed25519 key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_get_s2k_count): Actually return the count.
--
The previous push was definitely a bit to hasty.
Fixes-Commit: ec13b1c562
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/passphrase.c (encode_s2k_iterations): Move function to ...
* common/openpgp-s2k.c: new file. Remove default intialization code.
* common/openpgpdefs.h (S2K_DECODE_COUNT): New to keep only one copy.
* g10/call-agent.c (agent_get_s2k_count): Change to return the count
and print an error.
* agent/protect.c: Include openpgpdefs.h
* g10/card-util.c (gen_kdf_data): Adjust for changes
* g10/gpgcompose.c: Include call-agent.h.
(sk_esk): Adjust for changes.
* g10/passphrase (passphrase_to_dek): Adjust for changes.
* g10/main.h (S2K_DECODE_COUNT): Remove macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (openpgp_pk_test_algo2): Add extra check.
--
The problem is that --key-gen --batch with a parameter file didn't
detect that Elgamal is not capable of signing and so an error was only
triggered at the time the self-signature was created. See the code
comment for details.
GnuPG-bug-id: 4329
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (print_pubkey_info): Reverse the condition.
--
This mistakes were introduced when replacing by estream.
It resulted 'gpg --card-status' from a process with no controlling
terminal fails.
Fixes-commit: fb2ba98963
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/packet.h (struct revocation_key): Add field 'fprlen'.
* g10/parse-packet.c (parse_revkeys): Set fprlen and allow for v5
keys. Also fix reading of unitialized data at place where
MAX_FINGERPRINT_LEN is used.
* g10/revoke.c (gen_desig_revoke): Allow for v5 keys and use fprlen.
Do an explicit compare to avoid reading unitialized data.
* g10/sig-check.c (check_revocation_keys): Use the fprlen.
* g10/getkey.c (merge_selfsigs_main): Do an explicit copy to avoid
reading unitialized data.
* g10/import.c (revocation_present): Use fprlen.
* g10/keyedit.c (show_key_with_all_names): Use fprlen.
(menu_addrevoker): Use fprlen. Allow for v5 keys.
* g10/keygen.c (keygen_add_revkey): Use fprlen.
(parse_revocation_key): Allow for v5 keys.
* g10/keyid.c (keyid_from_fingerprint): Allow for v5 keys. Print a
better error message in case of bogus fingerprints.
* g10/keylist.c (print_revokers): Use fprlen.
--
The reading of uninitialized data is harmless but we better fix it to
make valgrind happy. More serious was that we always passed
MAX_FINGERPRINT_LEN but we will need to support 20 and 32 octet
fingerprints and MAX_FINGERPRINT_LEN would be too large for a v4.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add option "show-only-fpr-mbox".
* g10/options.h (LIST_SHOW_ONLY_FPR_MBOX): New.
* g10/keylist.c (list_keyblock_simple): New.
(list_keyblock): Call it.
(list_all): Do not print the keyring name in LIST_SHOW_ONLY_FPR_MBOX
mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (mainproc_context): New member
'seen_pkt_encrypted_aead'.
(release_list): Clear 'seen_pkt_encrypted_aead'.
(proc_encrypted): Set 'seen_pkt_encrypted_aead'.
(have_seen_pkt_encrypted_aead): New.
(proc_plaintext): Do not enable extra hash contexts when decryption
AEAD input.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (asctobin): Larger look-up table for fast path.
(initialize): Update 'asctobin' initialization.
(radix64_read): Add fast path for radix64 to binary conversion.
--
This patch adds fast path for radix64 to binary conversion in
armored decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc+radix64 opt)
-------------------------------------
gpg process
armor: user time pipe transfer rate
decrypt-aead: 9.8 200 MB/s
decrypt-cfb: 11.9 168 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (bintoasc): Change to read-only.
(initialize): Use const pointer for 'bintoasc'.
(armor_output_buf_as_radix64): New function for faster binary to
radix64 conversion.
(armor_filter): Use new conversion function.
--
This patch adds faster binary to radix64 conversion to speed up
armored encryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc+radix64 opt)
-------------------------------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 2.7 523 MB/s
encrypt-cfb: 6.7 264 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (CRCINIT, CRCPOLY, CRCUPDATE, crc_table): Remove.
(new_armor_context): Open libgcrypt CRC24 context.
(release_armor_context): Close CRC24 context.
(initialize): Remove CRC table generation.
(get_afx_crc): New.
(check_input, fake_packet, radix64_read, armor_filter): Update to use
CRC24 context.
* g10/filter.h (armor_filter_context_t): Replace crc intermediate value
with libgcrypt md context pointer.
--
This patch changes armor filter to use optimized CRC24 implementation
from libgcrypt to speed up encryption and decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt+iobuf+crc opt)
-----------------------------
gpg process
armor: user time pipe transfer rate
encrypt-aead: 8.7 211 MB/s
decrypt-aead: 17.6 116 MB/s
encrypt-cfb: 12.6 153 MB/s
decrypt-cfb: 19.6 105 MB/s
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/armor.c (radix64_read): Check EOF with '!afx->buffer_len' instead
of 'c == -1', as 'c' is never set to this value.
--
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/decrypt-data.c (fill_buffer): Use iobuf_read instead of iobuf_get
for reading data.
--
This patch reduces iobuf_read per byte processing overhead and speeds
up decryption.
Benchmark results below, tested on Intel Core i7-4790K (turbo off).
Encrypted 2 GiB through pipe to ramfs file using AES128. Decrypt
ramfs file out through pipe to /dev/null.
before patch-set
----------------
gpg process
no-armor: user time pipe transfer rate
encrypt-aead: 1.02 1.0 GB/s
decrypt-aead: 10.8 185 MB/s
encrypt-cfb: 4.8 342 MB/s
decrypt-cfb: 12.7 157 MB/s
gpg process
armor: user time pipe transfer rate
encrypt-aead: 13.8 140 MB/s
decrypt-aead: 30.6 68 MB/s
encrypt-cfb: 17.4 114 MB/s
decrypt-cfb: 32.6 64 MB/s
after (decrypt opt)
-------------------
gpg process
no-armor: user time pipe transfer rate
decrypt-aead: 7.3 263 MB/s
decrypt-cfb: 9.3 211 MB/s
gpg process
armor: user time pipe transfer rate
decrypt-aead: 27.0 77 MB/s
decrypt-cfb: 29.0 72 MB/s
Note: decryption results are much slower than encryption because of
extra SHA1 & RIPEMD160 hashing.
GnuPG-bug-id: 3786
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
* g10/cipher-aead.c (do_flush): No cast is correct.
* g10/decrypt-data.c (aead_underflow): No cast needed.
Use "%j" for uint64_t for chunklen.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-agent.c (learn_status_cb): Parse "bt" flag.
* g10/call-agent.h: New member field "bt".
* g10/card-util.c (uif): Limit its access only when it is supported.
* scd/app-openpgp.c (do_setattr): Allow access to UIF objects only
when there is a button.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tdbio.c (tdbio_update_version_record): Never store a TOFU model.
(create_version_record): Don't init as TOFU.
(tdbio_db_matches_options): Don't indicate a change in case TOFU is
stored in an old trustdb file.
--
This change allows to switch between a tofu and pgp or tofu+pgp trust
model without an auto rebuild of the trustdb. This also requires that
the tofu trust model is requested on the command line. If TOFU will
ever be the default we need to tweak the model detection via TM_AUTO
by also looking into the TOFU data base,
GnuPG-bug-id: 4134
* g10/sig-check.c (check_signature_end_simple):
--
Obviously we should not ignore a back signature here.
Fixes-commit: 214b007726
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pubkey-enc.c (get_session_key): Take care of
opt.skip_hidden_recipients.
--
This was lost due to
Fixes-commit: ce2f717601
GnuPG-bug-id: 4169
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_DROP_UIDS): New.
(EXPORT_DROP_UIDS): New.
* g10/import.c (parse_import_options): Add option "import-drop-uids".
(import_one): Don't bail out with that options and no uids found.
Also remove all uids.
(remove_all_uids): New.
* g10/export.c (parse_export_options): Add option "export-drop-uids".
(do_export_one_keyblock): Implement option.
--
These options are required for experiments with changes to the
keyserver infrastructure.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Use SK_LIST instead of pubkey_t.
--
The use of pubkey_t was wrong. The use is just a list of keys, not
with keyblock. With SK_LIST, release_sk_list releases memory by
free_public_key.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/skclist.c (enum_secret_keys): Don't forget to call
free_public_key in the error return paths.
--
Reported-by: Philippe Antoine
GnuPG-bug-id: 4140
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* dirmngr/ks-engine-hkp.c (ks_hkp_search): Send SOURCE status also on
NO DATA error.
(ks_hkp_get): Ditto.
* g10/call-dirmngr.c (gpg_dirmngr_ks_search): Print "data source" info
also on error.
(gpg_dirmngr_ks_get): Ditto.
--
If a keyserver does not return any data it can be useful to know which
keyserver out of the pool answered.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_block): Call free_packet to skip the packet.
--
Reported-by: Philippe Antoine
GnuPG-bug-id: 3916
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c (oKnownNotation): New const.
(opts): Add option --known-notation.
(main): Set option.
* g10/parse-packet.c (known_notations_list): New local var.
(register_known_notation): New.
(can_handle_critical_notation): Rewrite to handle the new feature.
Also print the name of unknown notations in verbose mode.
--
GnuPG-bug-id: 4060
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (getkey_ctx_s): New field found_via_akl.
(get_pubkey_byname): Set it.
(only_expired_enc_subkeys): New.
(get_best_pubkey_byname): Add support to refresh expired keys from the
WKD.
--
A little drawback of that code is that if the WKD has no update for an
expired key each access of the key will trigger a WKD lookup (unless
cached by the dirmngr). To avoid this we need to record the last time
we have checked for an update but that would in turn require that we
update the keyring for each check. We defer this until we have a
better key database which allows for fast updates of meta data.
Testing the code is currently a bit cumbersome because it requires to
update a key in the WKD several times. Eventually we we need a
network emulation layer to provide sample data for the regression
tests.
GnuPG-bug-id: 2917
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.h (agent_card_info_s): Rename the "*valid" fields to
"*len".
* g10/call-agent.c (unhexify_fpr): Change to take a FPRLEN and to
return the actual length.
(agent_release_card_info): Adjust for these changes.
* g10/card-util.c (print_sha1_fpr): Rename to print_shax_fpr and add
arg FPRLEN. Change all callers to pass the length.
(print_sha1_fpr_colon): Rename to print_shax_fpr_colon and add arg
FPRLEN. Change all callers to pass the length.
(fpr_is_zero): Add arg FPRLEN.
(fpr_is_ff): Ditto.
(show_card_key_info): Use the new functions.
* g10/skclist.c (enum_secret_keys): Use MAX_FINGERPRINT_LEN.
--
This is not needed right now but we should get rid of all hard coded
fingerprint lengths. Thus this change.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/skclist.c (enum_secret_keys): Since "KEY-FPR" returns
fingerprint in binary, change it to hex string.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Move to...
* g10/skclist.c (enum_secret_keys): ... here.
--
The function enum_secret_keys is not used by gpgv.c, but it is in
getkey.c. Extending enum_secret_keys will require change of gpgv.c,
so moving the function to the file for gpg is better.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Fix comment for usage of
enum_secret_keys, following the previous change.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (enum_secret_keys): Collecting keys in the context,
check duplicate to make sure returning only unique keys.
* g10/pubkey-enc.c (get_session_key): Now, it's the responsibility of
enum_secret_keys to free keys.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (struct mainproc_context): It's now pubkey_enc_list.
(do_proc_packets): Remove the first arg CTRL. Fix call of
proc_pubkey_enc.
(release_list): Handle pubkey_enc_list.
(proc_pubkey_enc): Remove the first arg CTRL. Simply put the packet
to pubkey_enc_list.
(print_pkenc_list): Remove the last arg FAILED.
(proc_encrypted): Only call print_pkenc_list once.
Handle DEK here.
(proc_packets, proc_signature_packets, proc_signature_packets_by_fd)
(proc_encryption_packets): Fix call of do_proc_packets.
* g10/packet.h (struct pubkey_enc_list): Define.
* g10/pubkey-enc.c (get_it): Change the second argument K.
(get_session_key): Select session key by LIST, using enum_secret_keys.
* g10/gpgv.c (get_session_key): Change the second argument K.
* g10/test-stubs.c (get_session_key): Likewise.
--
Collect all PKT_PUBKEY_ENC packets, and then, process the
PKT_ENCRYPTED* packet.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/parse-packet.c (parse_symkeyenc): Use iobuf_get_noeof.
(parse_key): Likewise.
--
When EOF comes at parsing s2k.count, it is possible the value will
be (unsigned long)-1. Then, the result of S2K_DECODE_COUNT will be
undefined. This patch fixes undefined behavior.
Reported-by: Philippe Antoine
GnuPG-bug-id: 4093
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/call-dirmngr.c (MAX_WKD_RESULT_LENGTH): New.
(gpg_dirmngr_wkd_get): Use it.
--
WKD should return only a single key with just one UID. For key
rollover 2 keys may be send. A total of 256 KiB seems to be a
generous limit here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dirmngr-status.h: New.
* dirmngr/dirmngr.h: Include dirmngr-status.h and move some prototypes
to that file.
* dirmngr/t-support.c: New.
* dirmngr/Makefile.am (dirmngr_SOURCES): Add dirmngr-status.h.
(t_common_src): Add t-support.c.
* dirmngr/server.c (dirmngr_status_printf): Bypass if CTRL is NULL.
* dirmngr/dns-stuff.c: Include dirmngr-status.h.
(libdns_init): Print WARNING status line. Change call callers to take
and pass a CTRL argument.
* g10/call-dirmngr.c (ks_status_cb): Print info for new WARNING
status.
--
To test this you can change RESOLV_CONF_NAME in dns-stuff.c and run
gpg --recv-key -v SOMETHING.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/key-clean.c (clean_key): Rename to clean_all_uids and split
subkey cleaning into ...
(clean_all_subkeys): new. Call that always after the former clean_key
invocations.
--
Note that the clean_all_subkeys function will later be extended.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_for_sig): New.
(get_pubkeyblock_for_sig): New.
* g10/mainproc.c (issuer_fpr_raw): Give global scope.
(check_sig_and_print): Use get_pubkeyblock_for_sig.
* g10/pkclist.c (check_signatures_trust): Use get_pubkey_for_sig.
* g10/sig-check.c (check_signature2): Ditto.
(check_signature_over_key_or_uid): Ditto.
--
GnuPG-bug-id: 4046
The whole getkey stuff is still a mess with way to much duplication
and missing caching of already fetched data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (read_block): Add special treatment for bad user ids
and comment packets.
--
See
GnuPG-bug-id: 4022
for an example of a bogus user id.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (check_signature_end_simple): Check sign usage.
--
Without this patch the signature verification fails only due to the
missing back signature. This check better explains what went wrong.
GnuPG-bug-id: 4014
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (get_revocation_reason): New.
(list_standalone_revocation): Extend function.
--
Note that this function extends the "rvs" field signature-class (field
11) with the revocation reason. GPGME does not yet parse this but it
can be expected that the comma delimiter does not break other parsers.
A new field is added to the "rvs" (and in future also the "rev")
record to carry a record specific comment. Hopefully all parsers
meanwhile learned the lesson from other new fields and don't bail out
on more fields than they know about.
This is partial solution to
GnuPG-bug-id: 1173
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (impex_filter_getval): Add new "usage" property for
drop-subkey filter.
--
For example, this permits extraction of only encryption-capable
subkeys like so:
gpg --export-filter 'drop-subkey=usage !~ e' --export $FPR
GnuPG-Bug-id: 4019
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/gpg.c (main): Set some list options.
--
The new command --show-keys is commonly used to check the content of a
file with keys. In this case it can be expected that all included
subkeys and uids are of interested, even when they are already expired
or have been revoked.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_plaintext): Sanitize verbose output.
--
This fixes a forgotten sanitation of user supplied data in a verbose
mode diagnostic. The mention CVE is about using this to inject
status-fd lines into the stderr output. Other harm good as well be
done. Note that GPGME based applications are not affected because
GPGME does not fold status output into stderr.
CVE-id: CVE-2018-12020
GnuPG-bug-id: 4012
* g10/key-check.c (key_check_all_keysigs): Factor some code out to ...
(remove_duplicate_sigs): new.
(key_check_all_keysigs): Call remove_duplicate_sigs again after
reordering.
--
This is a follupup for commit 26bce2f01d
to cleanup the code and to add a second de-duplicate step when needed.
GnuPG-bug-id: 3994
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKG_siganture): Add field 'help_counter'.
* g10/key-check.c (sig_comparison): Take care of HELP_COUNTER.
(key_check_all_keysigs): De-duplicate on a per-block base.
--
The key_check_all_keysigs first does a detection of duplicate
signature. This is done over all signatures at once. The problem
here is for example:
key
uid_1
sig_uid_1.1
sig_uid_1.2
subkey_1
sig_sub_1.1
subkey_2
sig_sub_2.1
sig_sub_2.2 (duplicate of sig_sub_1.1)
Now the de-duplication deletes the first signature and keeps the
second. That works in most cases for foreign signature on userids but
in the above constellation the code simply removes sig_sub_1.1 so that
subkey_1 has no binding signature anymore. In a later step during
import the missing binding is detected and subkey_1 is removed because
it is not anymore valid. The sig_sub_2.2 will also be removed later
because it does not check out for subkey_2 (that is as expected).
The fix is to let the de-duplication work only on blocks (ie. within
the signatures of a user id or a subkey). This will not detect all
duplicates but that does not harm because later steps will detect and
remove them.
In the above case (with this patch applied) the second phase of
key_check_all_keysigs will reorder key signatures and move the
duplicate sig_sub_2.2 directly after sig_sub_1.1. This duplicates the
signature and for cleanness we should kick the de-duplication process
again. This will be done with a followup patch.
GnuPG-bug-id: 3994
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Print warning and later force an
error.
--
Note that when this error is triggered the plaintext from the literal
data packet has already been outputted before the BEGIN_DECRYPTION
status line. We fail only later to get more information. Callers
need to check and act upon the decryption error code anyway.
Thanks to Marcus for pointing out this case.
GnuPG-bug-id: 4000
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aShowKeys): New const.
(opts): New command --show-keys.
(main): Implement command.
* g10/import.c (import_keys_internal): Don't print stats in show-only
mode.
(import_one): Be silent in show-only mode.
--
Using
--import --import-options show-only
to look at a key is too cumbersome. Provide this shortcut and also
remove some diagnostic cruft in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_pubkey_enc): Remove a comment.
--
GnuPG always uses the OpenPGP algo number in its status report.
We can find a function in GPGME, it's _gpgme_map_pk_algo.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/mainproc.c (proc_encrypted): Print a hint for legacy ciphers w/o
MDC. Also print a dedicated status error code
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oAllowMultisigVerification)
(oAllowMultipleMessages, oNoAllowMultipleMessages): Remove.
(opts): Turn --allow-multisig-verification, --allow-multiple-messages
and --no-allow-multiple-messages into NOPs
* g10/options.h (struct opt): Remove flags.allow_multiple_messages.
* g10/mainproc.c (proc_plaintext): Assume allow_multiple_messages is
false.
--
These options are very old compatibility hacks and should not be used
anymore. We keep them as dummy options in case someone has them in
the conf file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Make --pgp6 an alias for --pgp7.
* common/compliance.h (gnupg_compliance_mode): Remove CO_PGP6.
* g10/options.h (PGP6): Remove. Adjust all users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Tuen options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
(use_aead): Ignore MDC options. Print warning for missing MDC feature
flags.
* g10/pkclist.c (warn_missing_mdc_from_pklist): Rename to ...
(warn_missing_aead_from_pklist): this and adjust.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoMDCWarn): Remove.
(opts): Make --no-mdc-warn a NOP.
(main): Don't set var.
* g10/options.h (struct opt): Remove 'no_mdc_var'.
* g10/cipher-cfb.c (write_header): Assume opt.no_mdc_warn is false.
* g10/mainproc.c (proc_encrypted): Ditto.
--
Users should not be allowed to suppress the warning that they are
shooting into their foot.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/compress.c (push_compress_filter2): Return an error if no filter
was pushed.
(push_compress_filter): Ditto.
(handle_compressed): Free CFX if no filter was pushed.
* g10/import.c (read_block): Ditto.
--
GnuPG-bug-id: 3898, 3930
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/compress.c (handle_compressed): Fix memory leak.
--
All other calls of push_compress_filter checks ALGO,
so, do it here, too.
GnuPG-bug-id: 3898
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_user_id_string): Add arg R_NOUID. Change call
callers.
(get_user_id): Add arg R_NOUID. Change call callers.
* g10/mainproc.c (issuer_fpr_string): Make global.
* g10/keylist.c (list_keyblock_colon): Print a '?' for a missing key
also in --list-mode. Print the "issuer fpr" field also if there is an
issuer fingerprint subpacket.
--
Scripts used to rely on the "User ID not found" string even in the
--with-colons listing. However, that is not a good idea because that
string is subject to translations etc. Now we have an explicit way of
telling that a key is missing. For example:
gpg --list-sigs --with-colons | \
awk -F: '$1=="sig" && $2=="?" {if($13){print $13}else{print $5}}'
Prints all keyids or fingerprint of signing keys for which we do not
have the key in our local keyring.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (issuer_fpr_raw): New.
(issuer_fpr_string): Re-implement using issuer_fpr_rtaw.
(check_sig_and_print): Don't free ISSUER_FPR. Use ISSUER_FPR_RAW.
Use write_status_printf. Extend ERRSIG status.
--
Modern OpenPGP implementations put the ISSUER_FPR into the signature
to make it easier to discover the, public needed to check the
signature. This is also useful in error messages and thus we add it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Print STATUS_FAILURE only based on passed
return code and not on the presence of any call to log_error.
--
This fixes an actual regression in GPGME where FAILURE is considered
for example by a signature verify operation. The operation will simply
fail and not just record that that a signature could not be verified.
In particular for files with more than one signature a log_error if
often called to show that a pubkey is missing for one of the
signatures. Using that log_error is correct in that case.
Fixes-commit: 0336e5d1a7
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoSymkeyCache): New.
(opts): Add that option.
(main): Set var.
* g10/options.h (struct opt): New field no_symkey_cache.
* g10/passphrase.c (passphrase_to_dek): Implement that feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_failure): Make it print only once.
* g10/gpg.c (wrong_args): Bump error counter.
(g10_exit): Print a FAILURE status if we ever did a log_error etc.
(main): Use log_error instead of log_fatal at one place. Print a
FAILURE status for a bad option. Ditto for certain exit points so
that we can see different error locations.
--
This makes it easier to detect errors by tools which have no way to
get the exit code (e.g. due to double forking).
GnuPG-bug-id: 3872
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (IS_BACK_SIG): New.
* g10/sig-check.c: Re-indent and use macros.
--
This makes the code easier to understand.
Signed-off-by: Werner Koch <wk@gnupg.org>
