* g10/mainproc.c (proc_encrypted): Print warning and later force an
error.
--
Note that when this error is triggered the plaintext from the literal
data packet has already been outputted before the BEGIN_DECRYPTION
status line. We fail only later to get more information. Callers
need to check and act upon the decryption error code anyway.
Thanks to Marcus for pointing out this case.
GnuPG-bug-id: 4000
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 344b548dc7)
* g10/gpg.c (aShowKeys): New const.
(opts): New command --show-keys.
(main): Implement command.
* g10/import.c (import_keys_internal): Don't print stats in show-only
mode.
(import_one): Be silent in show-only mode.
--
Using
--import --import-options show-only
to look at a key is too cumbersome. Provide this shortcut and also
remove some diagnostic cruft in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 257661d6ae)
* g10/mainproc.c (proc_encrypted): Print a hint for legacy ciphers w/o
MDC. Also print a dedicated status error code
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 874e391665)
* g10/gpg.c: Turn options --force-mdc, --no-force-mdc, --disable-mdc
and --no-disable-mdc into NOPs.
* g10/encrypt.c (use_mdc): Simplify. MDC is now almost always used.
* g10/cipher.c (write_header): Include extra hint and make
translatable.
* g10/options.h (struct opt): Remove fields force_mdc and disable_mdc.
--
The MDC is now always used except with --rfc2440 which will lead to a
a big fat warning.
This is a stripped down version of commit
253e8bdd90 which could not directly be
applied due to the AEAD mechanisms there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): Require an MDC or AEAD
* tests/openpgp/defs.scm (create-gpghome): Use --ignore-mdc-error to
allow testing with the current files.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d1431901f0)
Resolved Conflicts:
g10/mainproc.c - Remove AEAD stuff.
* g10/gpg.c (oNoMDCWarn): Remove.
(opts): Make --no-mdc-warn a NOP.
(main): Don't set var.
* g10/options.h (struct opt): Remove 'no_mdc_var'.
* g10/cipher-cfb.c (write_header): Assume opt.no_mdc_warn is false.
* g10/mainproc.c (proc_encrypted): Ditto.
--
Users should not be allowed to suppress the warning that they are
shooting into their foot.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 96350c5d5a)
* g10/compress.c (push_compress_filter2): Return an error if no filter
was pushed.
(push_compress_filter): Ditto.
(handle_compressed): Free CFX if no filter was pushed.
* g10/import.c (read_block): Ditto.
--
GnuPG-bug-id: 3898, 3930
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/compress.c (handle_compressed): Fix memory leak.
--
All other calls of push_compress_filter checks ALGO,
so, do it here, too.
GnuPG-bug-id: 3898
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/getkey.c (get_user_id_string): Add arg R_NOUID. Change call
callers.
(get_user_id): Add arg R_NOUID. Change call callers.
* g10/mainproc.c (issuer_fpr_string): Make global.
* g10/keylist.c (list_keyblock_colon): Print a '?' for a missing key
also in --list-mode. Print the "issuer fpr" field also if there is an
issuer fingerprint subpacket.
--
Scripts used to rely on the "User ID not found" string even in the
--with-colons listing. However, that is not a good idea because that
string is subject to translations etc. Now we have an explicit way of
telling that a key is missing. For example:
gpg --list-sigs --with-colons | \
awk -F: '$1=="sig" && $2=="?" {if($13){print $13}else{print $5}}'
Prints all keyids or fingerprint of signing keys for which we do not
have the key in our local keyring.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (issuer_fpr_raw): New.
(issuer_fpr_string): Re-implement using issuer_fpr_rtaw.
(check_sig_and_print): Don't free ISSUER_FPR. Use ISSUER_FPR_RAW.
Use write_status_printf. Extend ERRSIG status.
--
Modern OpenPGP implementations put the ISSUER_FPR into the signature
to make it easier to discover the, public needed to check the
signature. This is also useful in error messages and thus we add it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (g10_exit): Print STATUS_FAILURE only based on passed
return code and not on the presence of any call to log_error.
--
This fixes an actual regression in GPGME where FAILURE is considered
for example by a signature verify operation. The operation will simply
fail and not just record that that a signature could not be verified.
In particular for files with more than one signature a log_error if
often called to show that a pubkey is missing for one of the
signatures. Using that log_error is correct in that case.
Fixes-commit: 0336e5d1a7
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oNoSymkeyCache): New.
(opts): Add that option.
(main): Set var.
* g10/options.h (struct opt): New field no_symkey_cache.
* g10/passphrase.c (passphrase_to_dek): Implement that feature.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_failure): Make it print only once.
* g10/gpg.c (wrong_args): Bump error counter.
(g10_exit): Print a FAILURE status if we ever did a log_error etc.
(main): Use log_error instead of log_fatal at one place. Print a
FAILURE status for a bad option. Ditto for certain exit points so
that we can see different error locations.
--
This makes it easier to detect errors by tools which have no way to
get the exit code (e.g. due to double forking).
GnuPG-bug-id: 3872
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (IS_BACK_SIG): New.
* g10/sig-check.c: Re-indent and use macros.
--
This makes the code easier to understand.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (ask_card_rsa_keysize): Don't show message here.
(ask_card_keyattr): Show message when change, also for ECC.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (gen_kdf_data): Support single salt.
(kdf_setup): Can have argument for single salt.
* scd/app-openpgp.c (pin2hash_if_kdf): Support single salt.
--
Gnuk has "admin-less" mode. To support "admin-less" mode with KDF
feature, salt should be same for user and admin. Thus, I introduce a
valid use of single salt.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (ask_card_rsa_keysize): Drop support for magic
number 25519 for ed25519/cv25519. Rename from ask_card_keyattr.
(ask_card_keyattr): Support ECC, as well as RSA.
(do_change_keyattr): Support ECC dropping magical number 25519.
* g10/keygen.c (ask_curve): Allow call from outside, adding last arg
of CURRENT.
(generate_keypair): Follow the change of ask_curve.
(generate_subkeypair): Likewise.
--
GnuPG-bug-id: 3781
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/card-util.c (generate_card_keys): Check PIN later.
(card_generate_subkey): Likewise.
--
Changing key attribute resets PIN authentication status. So, CHECKPIN
should be after that, before key generation. Note that CHECKPIN is
done for binding signature.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tdbio.c (tdbio_read_record): Return GPG_ERR_EOF.
(tdbio_new_recnum): Never return on error.
(lookup_hashtable): Print a more descriptive error in case of !TABLE.
--
Also: tdbio_new_recnum had a bug in that it returned an error code and
not a record number in the error case. The function is expected to
always return a valid new record number.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (is_locked): Turn into a counter.
(take_write_lock, release_write_lock): Implement recursive locks.
--
On trustdb creation we have this call sequence:
init_trustdb -> takes lock
tdbio_set_dbname
create_version_record
tdbio_write_record
put_record_into_cache -> takes lock
put_record_into_cache -> releases lock
init_trustdb -> releases lock
The second take lock does noting but the first release lock has
already released the lock and the second release lock is a thus a NOP.
This is likely the cause for the corrupted trustdb as reported in
GnuPG-bug-id: 3839
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tdbio.c (in_transaction): Comment this var.
(put_record_into_cache): Comment the transaction code.
(tdbio_sync): Ditto
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* g10/options.h (struct opt): Add field request_origin.
* g10/call-agent.c (start_agent): Send option to the agent.
* sm/gpgsm.c (oRequestOrigin): New const.
(opts): New option --request-origin.
(main): Parse that option.
* sm/gpgsm.h (struct opt): Add field request_origin.
* sm/call-agent.c (start_agent): Send option to the agent.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (enum_sig_subpkt): Check buflen before reading
the type octet. Print diagnostic.
--
If the final subpacket has only a length header evaluating to zero and
missing the type octet, a read could happen right behind the buffer.
Valgrind detected this. Fix is obvious. Note that the further
parsing of the subpacket is still okay because it always checks the
length. Note further that --list-packets uses a different code path
and already reported an error.
Reported-by: Philippe Antoine
He provided a test file copied below. Running "gpg -v --verify" on it
triggered the bug.
-----BEGIN PGP ARMORED FILE-----
Comment: Use "gpg --dearmor" for unpacking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=qYZP
-----END PGP ARMORED FILE-----
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (factory_reset): Dummy PIN size is now 32-byte.
Connect the card again at the last step.
--
Before the change, a user has to quit the session to continue. Now,
it is possible to type RET in the session and see if it's really done.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
WIN32_LEAN_AND_MEAN is required to avoid definitions of grp1, grp2,
and grp3 in dlgs.h, which is included by windows.h.
Fixes-commit: fd595c9d36
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
Sorry, I accidentally pushed the last commit without having amended it
with this fix.
Fixes-commit: fd595c9d36
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.h (agent_card_info_s): Add fields grp1, grp2 and
grp3.
* g10/call-agent.c (unhexify_fpr): Allow for space as delimiter.
(learn_status_cb): Parse KEYPARIINFO int the grpX fields.
* g10/card-util.c (print_keygrip): New.
(current_card_status): Print "grp:" records or with --with-keygrip a
human readable keygrip.
--
Suggested-by: Peter Lebbing <peter@digitalbrains.com>
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (parse_keyblock_image): Use log_info instead of
log_error for skipped packets.
* g10/keyring.c (keyring_get_keyblock): Ditto.
--
log_info should be sufficient and makes this more robust. Some
tools (e.g. Enigmail) are too picky on return codes from gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_part): Add arg clear_cert.
(parse_key_parameter_string): Add arg suggested_use and implement
fallback. Change callers to pass 0 for new arg.
(parse_algo_usage_expire): Pass the parsed USAGESTR to
parse_key_parameter_string so that it can use it in case a subkey is
to be created.
--
The problem here was that future-default gives the primary and subkey
algorithm. However, when using future-default for adding a key, the
second part was always used which is for encryption. If the caller
now wanted to create a signing subkey using the future-default
parameters this did not worked.
gpg --batch --passphrase "" --quick-add-key FPR future-default encr
aready worked as did
gpg --batch --passphrase "" --quick-add-key FPR ed25519 sign
but
gpg --batch --passphrase "" --quick-add-key FPR future-default sign
does only work with this fix.
GnuPG-bug-id: 3747
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_pubkey_enc): Use dedicated error code for
list-only and put the key into PKENC_LIST.
(print_pkenc_list): Take care of the new error code.
--
If the secret keys exist in --list-only mode it was not printed in
--list-only mode.
GnuPG-bug-id: 3718
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_string): Allow "futuredefault" and
use case-insensitive matching
(quick_generate_keypair): Ditto.
(parse_algo_usage_expire): Ditto.
--
The man page is sometimes rendered in a way that the hyphen may be
not be considered as part of the string. And while at it we also
allow case-insensitivity.
GnuPG-bug-id: 3655
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/filter.h (cipher_filter_context_t): Remove unused filed
'create_mdc'. Turn field 'header' into a bit field. Add new fields
'short_blklen_warn' and 'short_blklen_count'.
* g10/cipher.c (write_header): Print a warning if MDC is not used.
(cipher_filter): Print a warning for long messages encrypted with a
short block length algorithm.
--
Note that to test this warning in a reliable way compression needs to
be disabled.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (default_recipient): Use hexfingerprint.
--
Note that on malloc failure this function now returns NULL instead of
terminating the process. However, under memory pressure any function
called latter will very likely fail as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkeys): Do not use xmalloc.
--
We eventually need to get rid of all xmallocs so that gpg won't fail
easily when we make more use of the s server mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (keygen_set_std_prefs): when producing default internal
personal-digest-preferences, keep the same order. When publishing
external preferences, state preference for SHA512 first.
--
SHA-512 has a wider security margin than SHA-256. It is also slightly
faster on most of the architectures on which GnuPG runs today. New
keys should publish defaults that indicate we prefer the stronger,
more performant digest.
Specifically, this changes --default-preference-list from:
SHA256 SHA384 SHA512 SHA224
to:
SHA512 SHA384 SHA256 SHA224
This patch deliberately avoids touching --personal-digest-preferences
(which itself would affect the default of --digest-algo and
--cert-digest-algo), so that public-facing cleartext signatures and
identity certifications will continue to be made with SHA256 by
default.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/trustdb.c (sanitize_regexp): Only escape operators.
--
Backport from master commit:
ccf3ba9208
To sanitize a regular expression, quoting by backslash should be only
done for defined characters. POSIX defines 12 characters including
dot and backslash.
Quoting other characters is wrong, in two ways; It may build an
operator like: \b, \s, \w when using GNU library. Case ignored match
doesn't work, because quoting lower letter means literally and no
much to upper letter.
GnuPG-bug-id: 2923
Co-authored-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/parse-packet.c (parse_plaintext): Fill up the allocated NAME.
--
This actually does not harm because we merely display a buffer
allocated by ourselves. However, we better tell Valgrind about it so
that we don't need to track this thing down ever again.
Test using a corrupted literal data packet:
echo cb 0a 75 ff 59 ae 90 d5 74 65 73 74 | \
undump |\
valgrind gpg --list-packets >/dev/null
Reported-by: Sebastian Schinzel
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (do_get_from_fd): Free the old buffer.
--
If the received input is longer than 200 characters we used to leak
the previous allocated buffer.
GnuPG-bug-id: 3528
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (factory_reset): Simplify.
--
In this summer, I got report about old code before this change didn't
work with newer Yubikey. I got another report test version of OpenPGP
card V3.3 implementation didn't work, either. Then, I confirmed that
according to the OpenPGP card specification, the procedure of old code
is not expected by its author.
This change simplify "factory-reset" as simple.
Only versions of Gnuk 1.2.2, 1.2.3, 1.2.4, won't work with this
change. That's because the factory-reset feature of Gnuk was
introduced by reading the implementation of GnuPG, instead of reading
the specification. Gnuk 1.2.5 and later works well. All OpenPGPcard
implementations I have work well (2.0, 2.1, 2.2, test version of 3).
GnuPG-bug-id: 3286
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit d63b7966cd)
* g10/card-util.c (ask_card_keyattr): Handle special value 25519.
(do_change_keyattr): Allow changing to cv25519/ed25519.
(generate_card_keys): Ditto.
(card_generate_subkey): Ditto.
--
This is kludge to make it easier for gnuk to be switched into ECC
mode. This is basically the same change as
commit ea09b6cded
but without the string change in show_keysize_warning.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (ask_card_rsa_keysize): Rename to ask_card_keyattr.
(do_change_rsa_keysize): Rename to do_change_keyattr.
--
We want to support other algos than RSA and thus we need a better name
for the functions.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f795f4529d)
* g10/key-check.c (print_info): New.
(key_check_all_keysigs): Print sig checking results only in debug
mode. Prettify the stats info and suppress them in quiet mode.
--
This also makes usable stats by prefixing them with the key and the
program name.
GnuPG-bug-id: 3397
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (KEYEDIT_NEED_SUBSK): New.
(cmds): Add this flag to keytocard, bkuptocard, expire, and passwd.
(keyedit_menu): Check whether only subkeys are available and take care
of that in the command check and in the HELP listing. Also print a
different notice if only subkeys are available.
--
Print "Secret key is available" and the bailing out in all commands
which require the _primary_ secret key was surprising. Now we print
another notice and adjust the checks.
GnuPG-bug-id: 3463
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (KEYEDIT_NOT_SK, KEYEDIT_ONLY_SK): Remove.
(cmds): Remove them.
--
These flags were cruft from the time we had to switch between secret
and public key view.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (generate_subkeypair): Ignore error code issued for
trying to verify a card based key.
--
We try to verify the primary key and thus seed the passphrase cache
before generating the subkey. However, the verification does not yet
work for on-card keys and thus the PASSWD --verify send to the agent
returns an error. This patch detects this error and continues without
a seeded passphrase cache. After all that pre-seeding is just a
convenience.
GnuPG-bug-id: 3280
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): Pass FROM_SK to list_keyblock_direct.
--
Note that this will likely add the suffix '#' top "sec" because the
secret key has not yet (or will not be) imported. If the secret key
already exists locally another suffix might be printed. The upshot is
that the suffix has no usefulness.
GnuPG-bug-id: 3431
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_secret_one): Check for dry-run before
transferring keys.
--
The use of --dry-run or --import-option show-only had no effect when
importing a secret key and the public key already existed. If the
public key did not exist an error message inhibited the import of the
secret key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/pkclist.c (find_and_check_key): Call get_validity on a specific
keyblock.
--
When we have multiple keyrings, get_validity after
get_best_pubkey_byname should access same keyring. Or else, the
situation of an expired key in keyring A but valid key in keyring B
causes SEGV.
Thanks to Guido Günther for the use case and the log.
Debian-bug-id: 878812
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keydb.c (keydb_handle): New field 'keep_lock'.
(keydb_release): Clear that flag.
(keydb_lock): New function.
(unlock_all): Skip if KEEP_LOCK is set.
* g10/getkey.c (get_keyblock_byfprint_fast): Call keep_lock if
requested.
--
That change is straightforward. It helps to avoid the race condition
that another gpg process inserts a key while the first process is
between the search and the insert.
A similar change is due for gpgsm.
Note that the key edit operations may still suffer from a race.
GnuPG-bug-id: 3446
* g10/getkey.c (get_pubkey_byfprint_fast): Factor most code out to ...
(get_keyblock_byfprint_fast): .. new function.
* g10/import.c (revocation_present): s/int rc/gpg_error_t err/.
(import_one): Use get_keyblock_byfprint_fast to get the keyblock and a
handle. Remove the now surplus keyblock fetch in the merge branch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_internal): Return gpg_error_t instead of
int. Change var names.
(import_keys_es_stream): Ditto.
(import_one): Ditto. Use a single keydb_new and simplify the use of
of keydb_release.
--
Note that this opens a keydb handle before we call
get_pubkey_byfprint_fast which internally uses another key db handle.
A further patch will cleanup this double use. Note that we also
disable the keydb caching for the insert case.
The s/int/gpg_error_t/ has been done while checking the call chains of
the import functions and making sure that gpg_err_code is always used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trust.c (register_trusted_key): Cut off everthing starting as a
hash sign.
--
This problem is fallout from
commit f99830b728
which fixes
GnuPG-bug-id: 1206
The same could happen with other options taking keyids but we won't
change that because a trailing '#' does not indicate a comment. So
this is really only a workaround and eventually we will
deprecate --trusted-key anyway or require a fingerprint as a value.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpgv.c (main): Call gnupg_initialize_compliance.
--
The compliance checker needs to be initialize so that it won't let
spit out a "not suitable" message. We use the module name of gpg.
Because there is no option to change the compliance mode in gpgv we
will always be in the default (CO_GNUPG) mode. It also does not make
much sense to have it here because gpgv expects a "curated" keyring.
GnuPG-bug-id: 3404
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (proc_parameter_file): Special case the email only
case.
--
Using a parameter file like
%ask-passphrase
key-type: RSA
key-length: 2048
key-usage: sign
subkey-type: RSA
subkey-length: 2048
subkey-usage: encrypt
name-email: foo@example.org
with "gpg --gen-key --patch" the result was this key
pub rsa2048 2017-09-11 [SC]
63A8C1BA12CC289A0E8072C971C7F8D4A18CE0BE
uid [ultimate] <foo@example.org>
sub rsa2048 2017-09-11 [E]
At least the the extra leading space the left angle bracket is wrong.
Further some mail providers reject keys which consist of more than
just a plain mail address. Using just a mail address is anyway the
new new suggested content for a user id. With this patch the key
will be
pub rsa2048 2017-09-11 [SC]
B302343C20EA6DECDB6A155135352F2520397080
uid [ultimate] foo@example.org
sub rsa2048 2017-09-11 [E]
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (check_signature_over_key_or_uid): Remove useless
condition. Actually free when SIGNER was allocated by us.
--
SIGNER_ALLOCATED never received a value of -1 but that was tested.
IF SIGNER_ALLOCATED was 2 the memory was never freed:
if (signer_allocated == 1)
if (signer_allocated == 2)
free()
Fixes-commit: 44cdb9d73f
This function needs to be audited more thoroughly.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This is to make those function better readable.
if (foo)
/* Comment */
{
}
is bad style because it requires extra time to notice the begin of the
block and vice versa when noticing the block it is not clear whether
this is an conditioned or unconditioned block.
Having asterisks on the left is better for view impaired people and
for b/w printouts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (gpgconf_list): Announce "auto-key-retrieve".
(main): Simplify setting of KEYSERVER_AUTO_KEY_RETRIEVE.
* tools/gpgconf-comp.c: Make "no-auto-key-retrieve" invisible. Make
"auto-key-retrieve" an expert option.
--
This basically reverts 9bb13a0e81
because --no-auto-key-retrieve is again the default. Note that we
allow both options for the sake of profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_options_gpg): Add max-cert-depth,
completes-needed, and marginals-needed options.
* g10/gpg.c (gpgconf_list): Likewise.
--
Some tests to come for the PGP trust model will need to manipulate
these parameters.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/gpg.c (main): remove KEYSERVER_AUTO_KEY_RETRIEVE from the
default keyserver options.
* doc/gpg.texi: document this change.
--
This is a partial reversion of
7e1fe791d1. Werner and i discussed it
earlier today, and came to the conclusion that:
* the risk of metadata leakage represented by a default
--auto-key-retrieve, both in e-mail (as a "web bug") and in other
contexts where GnuPG is used to verified signatures, is quite high.
* the advantages of --auto-key-retrieve (in terms of signature
verification) can sometimes be achieved in other ways, such as when
a signed message includes a copy of its own key.
* when those other ways are not useful, a graphical, user-facing
application can still offer the user the opportunity to choose to
fetch the key; or it can apply its own policy about when to set
--auto-key-retrieve, without needing to affect the defaults.
Note that --auto-key-retrieve is specifically about signature
verification. Decisions about how and whether to look up a key during
message encryption are governed by --auto-key-locate. This change
does not touch the --auto-key-locate default of "local,wkd". The user
deliberately asking gpg to encrypt to an e-mail address is a different
scenario than having an incoming e-mail trigger a potentially unique
network request.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* doc/gpg.texi: Document new option.
* g10/call-dirmngr.c (create_context): Fail if option is given.
* g10/gpg.c (cmd_and_opt_values): New value.
(opts): New option.
(gpgconf_list): Add new option.
(main): Handle new option.
* g10/options.h (struct opt): New field 'disable_dirmngr'.
* tools/gpgconf-comp.c (gc_options_gpg): New option.
GnuPG-bug-id: 3334
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (gpgconf_list): Print no-auto-key-retrieve instead of
auto-key-retrieve.
* tools/gpgconf-comp.c (gc_options_gpg): Replace auto-key-retrieve by
no-auto-key-retrieve and chnage level from invisible to advanced.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Add KEYSERVER_AUTO_KEY_RETRIEVE to the default
keyserver options. Set the default for --auto-key-locate to
"local,wkd". Reset that default iff --auto-key-locate has been given
in the option file or in the commandline.
* g10/getkey.c (parse_auto_key_locate): Work on a copy of the arg.
--
GnuPG-bug-id: 3324
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_DRY_RUN): New.
* g10/import.c (parse_import_options): Add "show-only".
(import_one): use that as alternative to opt.dry_run.
--
This is just a convenience thing for
--import-options import-show --dry-run
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/revoke.c (gen_standard_revocation): Set opt.outfile to NULL
temporarily to create certificate in right place.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 3015
* g10/main.h (open_outfile): New parameter NO_OUTFILE.
* g10/openfile.c (open_outfile): New parameter NO_OUTFILE. If given,
never use opt.outfile.
* g10/revoke.c (create_revocation): If FILENAME is true, also set
NO_OUTFILE to true (for standard revocation certificates).
* g10/dearmor.c, g10/encrypt.c, g10/export.c, g10/revoke.c,
g10/sign.c: Adjust all other callers.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 3015
* g10/pubkey-enc.c (get_session_key): Bail out if the algo is not
allowed in the current compliance mode.
* sm/decrypt.c (gpgsm_decrypt): Ditto.
--
The idea here is that the owner of the key created a non-compliant key
and later receives a mail encrypted to that key. The sender should
have checked this key too but we can't guarantee that. By hard
failing here the owner of the key will notice that he had created a
non-compliant key and thus has a chance to generate a new compliant
key. In case the compliant criteria changes and the owner wants to
decrypt an old message he can still switch gpg to another compliant
mode.
Fixes-commit: a0d0cbee76
GnuPG-bug-id: 3308
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (warn_version_mismatch): Print a note on how to
restart the servers.
* g10/call-dirmngr.c (warn_version_mismatch): Ditto.
* sm/call-agent.c (warn_version_mismatch): Ditto.
* sm/call-dirmngr.c (warn_version_mismatch): Ditto.
--
We should move this fucntion to common. However, the status output
functions are different and would need to be streamlined too.
GnuPG-bug-id: 3117
Debian-bug-id: 860745
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Change return type to
gpg_error_t. Use var name err instead of rc. Move a
gpg_error_from_syserror closer to the call.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_best_pubkey_byname): Init NEW.
--
We call free_user_id on NEW.uid and thus it needs to be initialized.
This fixes the ref-count or invisible segv bug from
GnuPG-bug-id: 3266
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_pk_is_allowed): Rework to always allow
verification.
* g10/mainproc.c (check_sig_and_print): Print a con-compliant warning.
* g10/sig-check.c (check_signature2): Use log_error instead of
log_info.
--
We should be able to verify all signatures. So we only print a
warning. That is the same beheavour as for untrusted keys etc.
GnuPG-bug-id: 3311
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/encrypt.c (encrypt_crypt): Do not abort for a non-compliant key.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
--
GnuPG-bug-id: 3306
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_pk_is_compliant): Remove the Elgamal
signing check. We don't support Elgamal signing at all.
(gnupg_pk_is_allowed) <de-vs>: Revert encryption/decryption for RSA.
Check the curvenames for ECDH.
* g10/pubkey-enc.c (get_session_key): Print only a warning if the key
is not compliant.
* sm/decrypt.c (gpgsm_decrypt): Ditto. Use the same string as in gpg
so that we have only one translation.
--
We always allow decryption and print only a note if the key was not
complaint at the encryption site.
GnuPG-bug-id: 3308
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/key-check.c (key_check_all_keysigs): Add arg mode and change all
output calls to use it.
* g10/keyedit.c (keyedit_print_one_sig): Add arg fp and chnage all
output calls to use it.
(keyedit_menu): Adjust for changes.
* g10/gpgcompose.c (keyedit_print_one_sig): Add dummy arg fp.
* g10/import.c (import_one): Call key_check_all_keysigs with output to
the log stream.
--
Fixes-commit: 404fa8211b
GnuPG-bug-id: 3288
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (do_generate_keypair): Only set fpr in
list_keyblock_direct invocation if neither --fingerprint nor
--with-fingerprints are given.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2741
* g10/import.c (update_key_origin): New.
(merge_blocks): Add arg curtime.
(import_one): Pass curtime to merge_blocks. Call update_key_origin.
--
We probably need to refine the rules on how this is done. But it is a
start.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Rename to ...
(insert_key_origin): this. Factor code out to ...
(insert_key_origin_pk, insert_key_origin_uid): new funcs.
(import_one): Move insert_key_origin behind clean_key.
(merge_blocks): Add args options, origin, and url.
(append_uid): Rename to ...
(append_new_uid): this. Add args options, curtime, origin, and url.
Call insert_key_origin_uid for new UIDs.
--
This is a straightforward change to handle new user ids.
How to test:
With an empty keyring run
gpg --with-key-origin --locate-key \
--auto-key-locate clear,nodefault,wkd wk@gnupg.org
and then append a new keyid using
gpg --with-key-origin --locate-key \
--auto-key-locate clear,nodefault,wkd wk@g10code.com
Works with my current key 80615870F5BAD690333686D0F2AD85AC1E42B367.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_get_chunk): Use KEYORG_KS if request was
done by fingerprint.
* g10/import.c (apply_meta_data): Implement that.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Remove arg 'merge'. Add arg 'url'.
Implement WKD and DANE key origin.
(import_keys_internal): Add arg 'url' and change all callers.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
* g10/keylist.c (list_keyblock_print): Fix update URL printing.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): Add arg 'r_url' to return
the SOURCE. Pass ks_status_cb to assuan_transact.
* g10/keyserver.c (keyserver_import_wkd): Get that URL and pass it to
the import function.
--
Note that this only for new keys. Merging this info will be added
soon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_import_cert): Use an import filter in
DANE mode.
--
We only want to see the user ids requested via DANE and not any
additional ids. This filter enables this in the same way we do this
in WKD.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/mainproc.c (proc_encrypted): If error code is GPG_ERR_CIPHER_ALGO,
assume the symmetric passphrase was wrong and invalidate the cache.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2270
* g10/free-packet.c (copy_public_key): Copy fields serialno and
updateurl.
--
The PK->serialno is used to get the version of the card to decide
whether it does support other algorithms than SHA-1. This value is
cached but no deep copy was done when calling copy_public_key.
Bug detected by importing some public keys and then importing a secret
key which led to a double free.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): If option import-clean is set,
also clean on initial import, not only for merge.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2401
* g10/keydb.h (MK_DATESTR_SIZE): New.
* g10/keyid.c (mk_datestr): Make public. Add arg bufsize and use
snprintf. Change arg atime to u32.
(datestr_from_pk): Simplify.
(datestr_from_sig): Ditto.
(expirestr_from_pk): Ditto.
(expirestr_from_sig): Ditto.
(revokestr_from_pk): Ditto.
--
Note that this also reduces the size of the static buffers from 16 to
11 which is sufficient for the string. In the past we added the 5
extra bytes to cope for bugs in gmtime which is now handles by
snprintf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (lookup): Return immediately on any other error than
GPG_ERR_NO_SECKEY from agent_probe_any_secret_key.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2204
* g10/mainproc.c (check_sig_and_print): Track key server request via
fingerprint.
--
New signatures carry the fingerprint and thus --auto-key-retrieve tries
to lookup the key by fingerprint. If that failed it used to also ask
the same thing by KEYID - but the keyid is part of the fingerprint and
thus it will either get no response or the wrong key back. We can
easily avoid this.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_rng_is_compliant): New.
* g10/call-agent.c (start_agent) [W32]: Check rng compliance.
* sm/call-agent.c (start_agent) [W32]: Ditto.
* g10/encrypt.c (encrypt_simple, encrypt_crypt): Check that the RNG is
compliant.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
* g10/sign.c (do_sign): Ditto.
* sm/sign.c (gpgsm_sign): Ditto.
--
Under Windows we need to check that the Jitter RNG is active in de-vs
mode. Under Linux this is not necessary because /dev/random can be
scrutinized and is believed to provide enough entropy.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_stream): Remove this unused function.
(import_keys_internal): Add arg origin.
(import_keys): Ditto.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
(apply_meta_data): New stub.
(import_secret_one): Pass 0 for ORIGIN.
* g10/keyserver.c (keyserver_get_chunk): For now pass 0 for ORIGIN.
(keyserver_fetch): Add arg origin.
(keyserver_import_cert): Pass KEYORG_DANE for ORIGIN.
(keyserver_import_wkd): Pass KEYORG_WKD for ORIGIN.
* g10/gpg.c (main): Pass OPT.KEY_ORIGIN to import_keys and
keyserver_fetch.
* g10/card-util.c (fetch_url): Pass KEYORG_URL for ORIGIN.
--
This is just the framework; applying the meta data will be done in
another commit.
GnuPG-bug-id: 3252
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/Makefile.am (tofu_source) [USE_TOFU]: Remove sqrtu32.h and
sqrtu32.c.
* g10/sqrtu32.h, g10/sqrtu32.c: Removed files.
* g10/tofu.c: Compare squares instead of square roots.
--
The original code is a factor 11.5 slower than using libm's sqrt(),
which in turn is a factor 3.5 slower than using one multiplication
on the other side of the comparison. Also, it's much simpler now.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
* common/status.h (STATUS_ENCRYPTION_COMPLIANCE_MODE): New.
* g10/encrypt.c (encrypt_crypt): Emit new status code.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
--
This status code allows to report whether an encryption operation was
compliant to de-vs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (show_keyserver_url): Print to 'fp', not to 'stdout'.
(show_notation): Likewise.
--
Fixes the fact that if mode == -1, all text except for the labels is
written to the tty, but the label is written to stdout, which is
buffered.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keygen.c (generate_subkeypair): Handle errors from pinentry.
--
Previously, when generating a subkey, gpg would ask for the passphrase
of the primary key. If that dialog is canceled, gpg would ask a
second time for a passphrase to protect the new subkey.
Fix this by handling the error.
GnuPG-bug-id: 3212
Signed-off-by: Justus Winter <justus@g10code.com>
* common/compliance.c (gnupg_pk_is_compliant): Swap P and Q for DSA
check. Explicitly check for allowed ECC algos.
(gnupg_pk_is_allowed): Swap P and Q for DSA check.
* g10/mainproc.c (proc_encrypted): Simplify SYMKEYS check. Replace
assert by debug message.
--
Note that in mainproc.c SYMKEYS is unsigned and thus a greater than 0
condition is surprising because it leads to the assumption SYMKEYS
could be negative. Better use a boolean test.
The assert could have lead to a regression for no good reason. Not
being compliant is better than breaking existing users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Document the new import option.
* g10/gpg.c (main): Make the new option default to yes.
* g10/import.c (parse_import_options): Parse the new option.
(import_one): Act on the new option.
* g10/options.h (IMPORT_REPAIR_KEYS): New macro.
GnuPG-bug-id: 2236
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/Makefile.am (gpg_SOURCES): Add new file.
* g10/keyedit.c (NODFLG_*): Move flags to the new header file.
(print_one_sig): Export symbol and rename accordingly.
(print_and_check_one_sig): Adapt accordingly.
(check_all_keysigs): Likewise.
* g10/keyedit.h: New file.
* g10/main.h: Drop declarations, include new header.
GnuPG-bug-id: 2236
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (getkey_end) [!W32]: Re-enable caching.
--
This change limits of the effects of commit
d3d640b9cc to W32 system.
GnuPG-bug-id: 3097
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpgcompose.c (encrypted_pop_options): New variable.
(encrypted_pop): Support the --help option.
Reported-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/mainproc.c (proc_encrypted): Symmetric encryption is also in
compliance with CO_DE_VS.
GnuPG-bug-id: 3059
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/call-agent.c (warn_version_mismatch): Use log_info if error is
"not supported".
--
This fix may make the fix for
GnuPG-bug-id: 3192
even more robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (gnupg_parse_compliance_option): New function.
* common/compliance.h (struct gnupg_compliance_option): New type.
(gnupg_parse_compliance_option): New prototype.
* g10/gpg.c (parse_compliance_option): Remove function.
(compliance_options): New variable.
(main): Adapt callsite.
* sm/gpgsm.c (main): Use the new common function.
* sm/gpgsm.h (opt): New field 'compliance'.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (set_compliance_option): The specification, section 4.1.1,
forbids the use of encryption without integrity protection.
GnuPG-bug-id: 3191
Signed-off-by: Justus Winter <justus@g10code.com>
* common/compliance.c (gnupg_pk_is_compliant): Add DSA with certain
parameters.
(gnupg_cipher_is_compliant): New function.
(gnupg_digest_is_compliant): Likewise.
* common/compliance.h (gnupg_cipher_is_compliant): New prototype.
(gnupg_digest_is_compliant): Likewise.
* common/status.h (STATUS_DECRYPTION_COMPLIANCE_MODE): New status.
(STATUS_VERIFICATION_COMPLIANCE_MODE): Likewise.
* doc/DETAILS: Document the new status lines.
* g10/mainproc.c (proc_encrypted): Compute compliance with CO_DE_VS
and report that using the new status line.
(check_sig_and_print): Likewise.
* sm/decrypt.c (gpgsm_decrypt): Likewise.
* sm/verify.c (gpgsm_verify): Likewise.
--
When decrypting data and verifying signatures, report whether the
operations are in compliance with the criteria for data classified as
VS-NfD. This information will be picked up by the frontend and
presented to the user.
GnuPG-bug-id: 3059
Signed-off-by: Justus Winter <justus@g10code.com>
* common/Makefile.am (common_sources): Add new files.
* common/compliance.c: New file. Move 'gnupg_pk_is_compliant' here,
and tweak it to not rely on types private to gpg.
* common/compliance.h: New file. Move the compliance enum here.
* g10/keylist.c (print_compliance_flags): Adapt callsite.
* g10/main.h (gnupg_pk_is_compliant): Remove prototype.
* g10/misc.c (gnupg_pk_is_compliant): Remove function.
* g10/options.h (opt): Use the new compliance enum.
* sm/keylist.c (print_compliance_flags): Use the common functions.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/misc.c (gnupg_pk_is_compliant): Compare against CO_RFC2440, not
RFC2440 which is actually a predicate.
Fixes-commit: fe0b37e123
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (getkey_end): Disable caching of the open keydb
handle.
--
This created a big regression for Windows because the keyring
is only released after the global ctrl is released. So if an operation
does a getkey and then tries to modify the keyring it will fail on
Windows with a sharing violation. We need to modify all
keyring write operations to also take the ctrl and close the
cached_getkey_kdb handle to make writing work. See:
https://dev.gnupg.org/T3097
GnuPG-Bug-Id: T3097
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/call-agent.c (warn_version_mismatch): Revert.
(start_agent): Suppress version mismatch if relevant.
* g10/getkey.c (get_seckey_default_or_card): New.
* g10/skclist.c (build_sk_list): Use get_seckey_default_or_card.
--
The change of 97a2394, which prefers available card than default key
specified is too strong.
Fixes-commit: 97a2394eca
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/tofu.c (ask_about_binding): Remove useless translation markers.
--
Translation and in particular punctuation marks can only be translated
with context. Thus making a sole comma translatable is useless.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.c (format_text): Return NULL on error.
* common/t-stringhelp.c (test_format_text): Adjust for change.
* g10/gpgcompose.c (show_help): Abort on out of core.
* g10/tofu.c (ask_about_binding): Abort on format_text error.
(show_statistics): Ditto.
(show_warning): Ditto.
--
For better re-usability function in common/ shot better not use
xmalloc functions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* Makefile.am (TESTS_ENVIRONMENT): New variable.
(check-all): New phony target to run all tests.
* tests/gpgme/gpgme-defs.scm (have-gpgme?): New function that tests
whether the GPGME test suite is available instead of exiting the
process.
* tests/gpgscm/init.scm (export): New macro.
* tests/gpgscm/tests.scm (run-tests): New function.
(load-tests): Likewise.
* tests/gpgme/run-tests.scm: Simplify and move the parsing of the list
of tests to 'all-tests.scm'.
* tests/gpgsm/run-tests.scm: Likewise.
* tests/migrations/run-tests.scm: Likewise.
* tests/openpgp/run-tests.scm: Likewise.
* tests/gpgme/Makefile.am: To select the tests to run, use the
variable 'TESTS'. This harmonizes the interface with the automake
test suite.
* tests/gpgsm/Makefile.am: Likewise.
* tests/migrations/Makefile.am: Likewise.
* tests/openpgp/Makefile.am: Likewise.
* tests/openpgp/README: Likewise.
* agent/all-tests.scm: New file.
* common/all-tests.scm: Likewise.
* g10/all-tests.scm: Likewise.
* g13/all-tests.scm: Likewise.
* tests/gpgme/all-tests.scm: Likewise.
* tests/gpgsm/all-tests.scm: Likewise.
* tests/migrations/all-tests.scm: Likewise.
* tests/openpgp/all-tests.scm: Likewise.
* tests/run-tests.scm: Likewise.
--
This change allows us to run all tests in parallel and write one XML
report capturing the results of every test. It also lays the
foundation to parametrize test suites.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/t-stutter.c (do_test): Refer current_test_group_failed.
--
Since this test does not follow the framework of TEST/TEST_P/ABORT,
the variable is not used.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keyring.c (keyring_get_keyblock): Use the parser's packet count
instead of counting ourself.
* g10/packet.h (struct parse_packet_ctx_s): New field
'n_parsed_packets'.
(init_parse_packet): Initialize new field.
* g10/parse-packet.c (parse): Count packets.
--
The 'keyring' keystore depends on the number of packets for delete and
update operations. With the rework of the ring trust packets, the
trust packets were no longer properly accounted for leading to keyring
corruptions.
The 'keybox' store was not affected.
GnuPG-bug-id: 3123
GnuPG-bug-id: 3135
GnuPG-bug-id: 3144
Fixes-commit: a8895c99a7
Signed-off-by: Justus Winter <justus@g10code.com>
* build-aux/speed/w32/inst.nsi: stop installing skeleton files.
* doc/gpg.texi: stop documenting skeleton files.
* g10/Makefile.am: stop installing skeleton files.
* g10/openfile.c (copy_options_file): Remove.
(try_make_homedir): do not call copy_options_file.
--
The defaults for gpg and dirmngr are good. Both programs should work
fine for the simple case without any config file. The skeleton config
files were being copied at first use (when the defaults are fine).
But when the user needs to fiddle with them (after they've become
sophisticated users), they're likely out of date because gpg has been
upgraded since then. So they're used for documentation, but they're
stale documentation, which is probably worse than a clean empty file.
GnuPG-bug-id: 3086
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* g10/skclist.c (build_sk_list): Ask gpg-agent if card is available.
Then, use the card key if any.
--
GnuPG-bug-id: 1983
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/gpg.c: Define _dowildcard = -1;
--
If this value is defined wildcard support in the c runtime
is enabled again. This fixes a regression caused by switching to
mingw 3.0
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
--
Locate every resource and every script used in the tests using a path
relative to the top of the source tree.
This is a purely mechanical change, mostly done using regular
expressions, with a few manual fixups here and there.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/openpgpdefs.h (CIPHER_ALGO_PRIVATE10, PUBKEY_ALGO_PRIVATE10)
(DIGEST_ALGO_PRIVATE10, COMPRESS_ALGO_PRIVATE10): New.
* g10/misc.c (map_pk_gcry_to_openpgp): Add type conversion.
(map_cipher_openpgp_to_gcry, openpgp_cipher_algo_name)
(openpgp_pk_test_algo2, map_md_openpgp_to_gcry)
(pubkey_get_npkey): Add default handling.
--
Compilers may emit code assuming the maximum value of enum type.
According to OpenPGP specification, there are cases for private uses.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/export.c (export_ssh_key): Check IDENTIFIER for error.
Release base64 thing on error of get_membuf.
--
Compiler (older) may misunderstand the variable IDENTIFIER is not
initialized, while good one can do better analysys on the value for
ERR (and thus, IDENTIFIER).
On the error of get_membuf, still, b64enc_finish should be called,
even if it lost the ERR value.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/compress-bz2.c: Include bzlib.h after gcrypt.h.
* tools/gpgsplit.c: Likewise.
--
bzlib.h may include windows.h on Windows. It is better
after gcrypt.h which may include winsock2.h.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keylist.c (list_keyblock_print): Set SECRET to 2 and not 0x32.
--
Reported-by: Danielle McLean <dani@00dani.me>
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (can_handle_critical): Add
SIGSUBPKT_REVOC_REASON.
--
Some software seems to mark that subpacket as criticial. Although gpg
has no special treatment for a revocation reasons (except for
--list-packets) we can accept a criticial marked anyway. There are no
mandatary rules specified on how to handle a revocation reason.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (KEYDB_HANDLE): Move typedef to ...
* g10/gpg.h: here.
(struct server_control_s): Add field 'cached_getkey_kdb'.
* g10/gpg.c (gpg_deinit_default_ctrl): Release that keydb handle.
* g10/getkey.c (getkey_end): Cache keydb handle.
(get_pubkey): Use cached keydb handle.
* kbx/keybox-search.c (keybox_search_reset): Use lseek instead of
closing the file.
--
Before this patch a "gpg --check-sigs" opened and closed the keybox
file for almost every signature check. By caching the keydb handle
and using lseek(2) this can be limited to just 2 times. This might
speed up things on Windows.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c: Use '#if' instead of '#ifdef' when checking
DEBUG_PARSE_PACKET. This fixes the build with '#define
DEBUG_PARSE_PACKET 0'.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keydb.c (keyblock_cache): Remove field SIGSTATUS.
(keyblock_cache_clear): Adjust for that removal.
(parse_keyblock_image): Remove arg SIGSTATUS. Remove the signature
cache setting; this is now done in the parser.
(keydb_get_keyblock): Do not set SIGSTATUS.
(build_keyblock_image): Remove arg SIGSTATUS and simplify. Change
caller.
* kbx/keybox-blob.c: Explain that the signature information is not
anymore used.
(_keybox_create_openpgp_blob): Remove arg SIGSTATUS and change
callers.
* kbx/keybox-search.c (keybox_get_keyblock): Remove arg R_SIGSTATUS
and change callers.
* kbx/keybox-update.c (keybox_insert_keyblock): Likewise.
--
This thing was too complicated and has been replaced by the new ring
trust packet code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct parse_packet_ctx_s): Change LAST_PKT deom a
pointer to its struct.
(init_parse_packet): Adjust for LAST_PKT not being a pointer.
* g10/parse-packet.c (parse): Ditto. Free the last packet before
storing a new one in case of a deep link.
(parse_ring_trust): Adjust for LAST_PKT not being a pointer.
* g10/free-packet.c (free_packet): Ditto.
* g10/t-keydb-get-keyblock.c (do_test): Release keyblock.
--
Fixes-commit: afa8680908
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (do_user_id): Avoid indeterminate length header.
--
We are able to import such user ids but when exporting them the
exported data could not be imported again because the parser bails out
on invalid keyrings. This is now fixed and should be backported.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_trust): Rename to ...
(parse_ring_trust): this. Change args and implement new ring trust
packet format.
(parse): Add special ring trust packet handling.
* g10/packet.h (PKT_user_id): New fields KEYUPDATE, UPDATEURL, and
KEYSRC.
(PKT_public_key): Ditto.
(RING_TRUST_SIG, RING_TRUST_KEY, RING_TRUST_UID): New consts.
(PKT_ring_trust): New.
(struct packet_struct): Remove member RING_TRUST.
(strcu parse_packet_ctx_s): Add field SKIP_META.
(init_parse_packet): Init SKIPT_META.
* g10/free-packet.c (release_public_key_parts): Free UDPATEURL.
(free_user_id): Ditto.
* g10/mainproc.c (list_node): Remove printing of non-documented "rtv"
lines.
* g10/build-packet.c (build_packet_and_meta): New.
(do_ring_trust): New.
* g10/export.c (write_keyblock_to_output): Use build_packet_and_meta
in backup mode.
(do_export_one_keyblock): Ditto.
* g10/import.c (read_block): Add arg WITH_META. Skip ring trust
packets if that ism not set.
(import): Call read_block WITH_META in restore mode.
* g10/keydb.h (KEYSRC_UNKNOWN, KEYSRC_FILE, KEYSRC_KS, KEYSRC_PREF_KS)
(KEYSRC_WKD, KEYSRC_WKD_SD, KEYSRC_DANE): New constants. They are not
yet used, though.
* g10/keydb.c (parse_keyblock_image): Allow ring trust packets.
(build_keyblock_image): Ditto. Use build_packet_and_meta.
* g10/keyring.c (keyring_get_keyblock): Remove specila treatment of
ring trust packets.
(write_keyblock): Use build_packet_and_meta. Remove special treatment
of ring trust packets and initialization of the signature caches.
--
This patch introduced the framework to store meta data for keys and
user ids in the keyrings/keyboxes. Ring trust packets are
implementation defined and have always been used in gpg to cache the
signature verification status.
Ring trust packets are only exported with the export option "backup"
and only imported with the import option "restore".
The new code uses a cleaner way to handle the ring trust packets: When
the parser reads a ring trust packet and the previously read packet
matches the type of that ring trust packet, the information is stored
in that previously read packet (signature, user id, or primary key)
and the next packet is read immediately. Thus only the parser sees
the ring trust packets. Ring trust packets are written by using the
new function build_packet_and_meta instead of build_packet. That
function writes a ring trust packet when the needed information is
available.
As a side-effect of this patch the signature status cache works again
and "gpg --check-sigs" is thus much faster.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct parse_packet_ctx_s): Add fields LAST_PKT and
FREE_LAST_PKT.
(init_parse_packet): Clear them.
(deinit_parse_packet): New macro. Change all users if
init_parse_packet to also call this macro.
* g10/free-packet.c (free_packet): Add arg PARSECTX and handle shallow
packet copies in the context. Change all callers.
* g10/parse-packet.c (parse): Store certain packets in the parse
context.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct parse_packet_ctx_s): New.
(parse_packet_ctx_t): New type.
(init_parse_packet): New macro.
* g10/parse-packet.c (parse_packet, dbg_parse_packet): Change to take
a parse context. Change all callers to provide a context instead of
directly supplying the input stream.
(search_packet, dbg_search_packet): Ditto.
(copy_all_packets, dbg_copy_all_packets): Init an use a parse context.
(copy_some_packets, dbg_copy_some_packets): Ditto.
(skip_some_packets, dbg_skip_some_packets): Ditto.
--
We will need this change to handle ring packets inside the parser.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_colon): Add empty fields 19 and 20.
--
We add them now to early catch error in parsers which arbitrary limit
the number of fields in --with-colon listings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (aQuickSetPrimaryUid): New const.
(opts): New command --quick-set-primary-uid.
(main): Implement it.
* g10/keyedit.c (keyedit_quick_adduid): Factor some code out to ...
(quick_find_keyblock): new func.
(keyedit_quick_revuid): Use quick_find_keyblock.
(keyedit_quick_set_primary): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/misc.c (gnupg_pk_is_compliant): New.
* g10/keylist.c (print_compliance_flags): New.
(list_keyblock_colon): Call it here.
* sm/keylist.c (print_compliance_flags): New.
(list_cert_colon): Call it here.
--
This patch is to convey information about DE_VS compliant keys to the
caller. The double digit value is used so that parsers do the right
thing and don't just look for a single digit.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (get_trust): Sanity check CONFLICT_SET after calling
get_policy. If POLICY is 'auto' and the default policy is 'ask', make
sure CONFLICT_SET includes the current key.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2959
Debian-bug-id: 854829
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/call-agent.c (select_openpgp): Remove.
--
By this change, the function get_serialno_cb will be also unused. But
please don't remove the function, because it will be soon used.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/keylist.c (print_signature_stats): Flush stdout.
(list_keyblock_colon): Use es_flush instead of fflush.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (keyedit_quick_revuid): Merge self signatures, then
make sure that we do not revoke the last valid UID.
(menu_revuid): Make sure that we do not revoke the last valid UID.
* tests/openpgp/quick-key-manipulation.scm: Demonstrate that
'--quick-revoke-uid' can not be used to revoke the last valid UID.
GnuPG-bug-id: 2960
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/getkey.c (get_best_pubkey_byname): Set released .UID to NULL.
--
Phil Pennock reported an assertion failure when doing
% gpg --auto-key-locate dane --locate-keys someone
gpg: Ohhhh jeeee: Assertion "uid->ref > 0" in \
free_user_id failed (free-packet.c:310)
on his keyring. This patch is not tested but a good guess.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (impex_filter_getval): Handle PKT_ATTRIBUTE the same as
PKT_USER_ID
(apply_drop_sig_filter): Ditto.
--
The old code was plainly wrong in that it considered PKT_ATTRIBUTE to
use a PKT_signature object.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): Always initialize the trust db when generating
keys.
* g10/keygen.c (do_generate_keypair): We can now assume that there is
a trust db.
--
It is important to mark keys we create as ultimately trusted.
Fixes-commit: 4735ab96aa
GnuPG-bug-id: 2695
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keygen.c (do_generate_keypair): Only update the ownertrust if we
do have a trust database.
* g10/trustdb.c (have_trustdb): New function.
* g10/trustdb.h (have_trustdb): New prototype.
* tests/openpgp/quick-key-manipulation.scm: Remove workaround.
GnuPG-bug-id: 2695
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keyedit.c (keyedit_quick_revuid): Signal an error when trying to
revoke non-existant UID.
* tests/openpgp/quick-key-manipulation.scm: Test that.
GnuPG-bug-id: 2962
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/export.c (export_seckeys): Add arg OPTIONS and pass it to
do_export.
(export_secsubkeys): Ditto.
* g10/gpg.c (main): Pass opt.export_options to export_seckeys and
export_secsubkeys
--
Back in the old days we did not used the export options for secret
keys export because of a lot of duplicated code and that the old
secring.gpg was anyway smaller that the pubring.gpg. With 2.1 it was
pretty easy to enable it.
Reported-by: Peter Lebbing
GnuPG-bug-id: 2973
* g10/trustdb.c (init_trustdb): Add and implement arg NO_CREATE.
Change to return an error code. Change all callers to to pass False
for NO_CREATE.
(tdb_get_ownertrust): New arg NO_CREATE. Call init_trustdb to test
for a non-existing trustdb. Change all callers to to pass False for
NO_CREATE.
(tdb_get_min_ownertrust): Ditto.
* g10/trust.c (get_ownertrust_with_min): Add arg NO_CREATE. Call
init_trustdb for a quick check.
(get_ownertrust_info): Add arg NO_CREATE.
(get_ownertrust_string): Ditto.
* g10/gpgv.c (get_ownertrust_info): Adjust stub.
* g10/test-stubs.c (get_ownertrust_info): Ditto.
* g10/mainproc.c (list_node): Call get_ownertrust_info with NO_CREATE
set.
* g10/pubkey-enc.c (get_it): Ditto.
--
Fixes-commit: effa80e0b5
For details see mails on Feb 27 and 28 by dkg, gniibe, and Justus to
gnupg-devel 'test failure on git master with
decrypt-session-key.scm (and: continuous integration?)'
Signed-off-by: Werner Koch <wk@gnupg.org>
I already have copyright assignment with the FSF for GDB. I don't
think I'll need to do the DCO thing.
Signed-off-by: Manish Goregaokar <manish@mozilla.com>
* g10/export.c (export_ssh_key): Also check the primary key.
--
If no suitable subkey was found for export, we now check whether the
primary key is suitable for export and export this one. Without this
change it was only possible to export the primary key by using the '!'
suffix in the key specification.
Also added a sample key for testing this.
GnuPG-bug-id: 2957
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sign.c (write_signature_packets): Free SIG. Also replace
xcalloc by xtrycalloc.
--
If do_sign fails SIG was not released. Note that in the good case SIG
is transferred to PKT and freed by free_packet.
Reported-by: Stephan Müller
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_fd_valid): New function.
* common/sysutils.h (gnupg_fd_valid): New declaration.
* common/logging.c (log_set_file): Use the new function.
* g10/cpr.c (set_status_fd): Likewise.
* g10/gpg.c (main): Likewise.
* g10/keylist.c (read_sessionkey_from_fd): Likewise.
* g10/passphrase.c (set_attrib_fd): Likewise.
* tests/openpgp/Makefile.am (XTESTS): Add the new test.
* tests/openpgp/issue2941.scm: New file.
--
Consider a situation where the user passes "--status-fd 3" but file
descriptor 3 is not open.
During the course of executing the rest of the commands, it's possible
that gpg itself will open some files, and file descriptor 3 will get
allocated.
In this situation, the status information will be appended directly to
whatever file happens to have landed on fd 3 (the trustdb? the
keyring?).
This is a potential data destruction issue for all writable file
descriptor options:
--status-fd
--attribute-fd
--logger-fd
It's also a potential issue for readable file descriptor options, but
the risk is merely weird behavior, and not data corruption:
--override-session-key-fd
--passphrase-fd
--command-fd
Fixes this by checking whether the fd is valid early on before using
it.
GnuPG-bug-id: 2941
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Define commands with ARGPARSE_c
instead of ARGPARSE_s_n.
--
These three entries are commands, but they're being treated as a
string-based option for some reason. However, if you try to use them
concurrently with another command like --clearsign, you'll get "gpg:
conflicting commands".
Furthermore, because they're marked as options, their flags differ
from the commands that they alias, they cause ambiguity in
abbreviation (e.g. try "gpg --list-ke") which should have been fixed
by 7249ab0f95.
Marking them explicitly as commands for argparse should be more
accurate and should resolve the abbreviation ambiguity issue.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
gpg: fix aliases --list-key, --list-sig, and --check-sig.
* g10/gpg.c: ARGPARSE_OPTS opts[]: define commands with ARGPARSE_c
instead of ARGPARSE_s_n.
--
These three entries are commands, but they're being treated as a
string-based option for some reason. However, if you try to use them
concurrently with another command like --clearsign, you'll get "gpg:
conflicting commands".
Furthermore, because they're marked as options, their flags differ
from the commands that they alias, they cause ambiguity in
abbreviation (e.g. try "gpg --list-ke") which should have been fixed
by 7249ab0f95.
Marking them explicitly as commands for argparse should be more
accurate and should resolve the abbreviation ambiguity issue.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/call-pinentry.c (start_pinentry): Call getinfo/ttyinfo.
* g10/server.c (gpg_proxy_pinentry_notify): Simplify the output so
that we do not change the code when adding new fields to
PINENTRY_LAUNCHED.
--
This patch changes the --verbose output of gpg to show
for example
gpg: pinentry launched (5228 gtk2 1.0.1-beta10 \
/dev/pts/4 xterm localhost:10.0)
the used tty, its type, and the value of DISPLAY in addiion to the
pid, flavor, and version.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (show_statistics): If there are not records, return 0
instead of NULL.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2853
According to SUSv3:
If the subject sequence is empty or does not have the expected form,
no conversion is performed
...
If no conversion could be performed, 0 is returned and errno may be
set to [EINVAL].
http://pubs.opengroup.org/onlinepubs/007908799/xsh/strtol.html
It appears that MacOS X sets errno to EINVAL, but glibc doesn't.
Hence, we map NULL to 0 explicitly.
* g10/tofu.c (get_trust): Call get_policy before short-circuiting the
policy lookup for ultimately trusted keys to make sure the binding is
added to the bindings table, if necessary.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2929
* g10/tofu.c (tofu_get_validity): If there was a conflict, don't also
print out a warning about too few messages.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (get_trust): Add arguments POLICYP and CONFLICT_SETP. If
they are not NULL, return the policy and conflict set (if there is
one), respectively. Update callers. If MAY_ASK is FALSE, don't print
out the statistics.
(tofu_register_encryption): If there is a conflict and we haven't yet
printed the statistics about the conflicting bindings, do so now.
(tofu_get_validity): Likewise.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2914
* g10/keyring.c (compare_name): Fix KEYDB_SEARCH_MODE_MAIL* searches
in keyrings when the UID is a plain addr-spec.
--
Previously, 'gpg --list-key "<foo@example.org>"' failed if 1/ the
keyring format is used and 2/ the key's UID is a plain addr-spec
(cf. RFC2822 section 4.3), e.g. 'foo@example.org'.
GnuPG-bug-id: 2930
Signed-off-by: Justus Winter <justus@g10code.com>
* dirmngr/ks-engine-hkp.c (tor_not_running_p): New.
(map_host): Call that to print a warning.
(handle_send_request_error): Ditto and avoid marking the host dead.
Also print a tor_config_problem warning. Add arg CTRL; adjust callers
to pass that new arg.
* g10/call-dirmngr.c (ks_status_cb): Detect and print the new
warnings.
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/trustdb.c (check_regexp): Correctly print whether the
regexp matched or not.
--
This patch fixes the log message displayed when gpg attempts to
match the regexp associated with a trust signature with an user ID.
The current message interprets the 'ret' variable backwards, and
displays 'YES' when the regexp actually fails to match.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/export.c (parse_export_options): Add "backup" and its alias
"export-backup".
(do_export_one_keyblock): Export ring trust packets in backup mode.
* g10/import.c (parse_import_options): Add "restore" and its alias
"import-restore".
(read_block): Import ring trust packets.
--
These options are intended to, well, backup and restore keys between
GnuPG implementations. These options may eventually be enhanced to
backup and restore all public key related information.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (main): If the parameter for --faked-system-time
ends with a '!', freeze time at the specified point.
* common/gettime.c (gnupg_set_time): Allow to freeze the time
at an arbitrary time instead of only the current time.
* doc/gpg.texi: Update documentation for --faked-system-time.
--
This patch allows the user to modify the behavior of the
--faked-system-time option: by appending a '!' to the parameter,
time in GnuPG will be frozen at the specified time, instead of
advancing normally from that time onward.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/keylist.c (show_policy_url): Implement MODE -1.
(show_keyserver_url): Ditto.
(show_notation): Ditto.
* g10/keyedit.c (print_one_sig): Print policy URL, keyserver URL and
notation data to the tty.
--
With this change the listing of signatures in the key edit menu does
now include policy URLs et al in order and not possible after leaving
the menu (it used to go to stdout and not the tty).
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trust.c (mark_usable_uid_certs): Allow use of secret key packets.
(clean_sigs_from_uid): Ditto.
(clean_uid_from_key): Ditto.
(clean_one_uid): Ditto.
(clean_key): Ditto.
--
Since 2.1 secret keys and public keys use identical data structure and
thus we should not restrict those key cleaning functions to work only
with public key packets. This change has no immediate effect but may
come handy in the future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (keygen_set_std_prefs): Rename variable.
--
I consider it better not to use the name of a commonly used function.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (write_stats_status): Use the number of days with
signatures / encryptions to compute the validity, not the total number
of signatures / encryptions.
(BASIC_TRUST_THRESHOLD): Adjust given the new semantics.
(FULL_TRUST_THRESHOLD): Likewise.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* doc/DETAILS: Add SIGN-DAYS and ENCRYPT-DAYS to the TOFU_STATS status
line.
* g10/tofu.c (write_stats_status): Take additional parameters
signature_days and encryption_days. Update callers. Include them in
the tfs record and TOFU status lines.
(show_statistics): Compute the number of days on which we saw a
message signed by FINGERPRINT, and the number of days on which we
encrypted a message to it.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (ask_about_binding): Emit all of the conflicting keys and
their statistics on the status fd.
(get_trust): Likewise, if we don't call ask_about_binding.
(show_statistics): Have the caller pass the policy as returned by
get_policy. Add argument only_status_fd and don't emit any output on
stdout if it is set. Update callers.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (main): Avoid translating arguments to 'wrong_args'.
--
Translating these messages is a burden for translators, and we only
have translations for very few of them as it is.
If we want to localize these messages, I'd suggest to translate the
placeholders (e.g. 'filename').
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename options.
(main): Update errors.
* doc/gpg.texi: Update accordingly.
--
I decided not to keep the old versions as aliases in the documentation
because the interface is a fairly recent addition.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* g10/call-agent.c (agent_scd_learn): Update comment.
* doc/gpg.texi: Update accordingly.
--
This change has a surprising side effect. Previously, --edit was an
alias for --edit-key, because the argument parser actually accepts
unique prefixes of all options. With this change, however, --edit is
ambiguous.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/gpg.c (opts): Rename option.
* doc/gpg.texi: Update accordingly.
--
This is a rather long name, but I believe that this command is rarely
used, and in places where it is used frequently, the process is likely
automated.
GnuPG-bug-id: 2700
Signed-off-by: Justus Winter <justus@g10code.com>
* doc/gpg.texi: Document that fact.
* g10/keygen.c (quick_generate_keypair): Use a default value.
* tests/openpgp/quick-key-manipulation.scm: Test that fact.
GnuPG-bug-id: 2701
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keygen.c (get_default_pubkey_algo): New.
(parse_key_parameter_string): Use it.
* g10/gpg.c (gpgconf_list): Take value from new function.
--
Note that consumers of that gpgconf-list value may need to be adjusted
to that new value. It should anyway only be used to display the
default algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (parse_key_parameter_string): Fix handling of PART==1.
(parse_key_parameter_part): Use default key size if only "rsa", "dsa",
or "elg" is given.
--
The first change is the actual fix. The second change avoids the
error "Invalid Curve" when only "rsa" instead of RSA2048 is given.
Fixes-commit: ce29272e24
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (default_expiration_interval): New variable.
(generate_keypair): Use the new default.
--
Cursory discussion on gnupg-devel@ suggested two years as a good
default expiration interval.
GnuPG-bug-id: 2701
Signed-off-by: Justus Winter <justus@g10code.com>
* dirmngr/loadswdb.c: Set ERR on malloc failure.
* g10/passphrase.c (passphrase_to_dek): Initialize all fields of
HELP_S2K.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (build_conflict_set): Revert to int* and fix calloc.
--
The original code used an int array and thus better keep that and do
not limit it to 128 entries.
Fixes-commit: c3008bffac
Fixes-commit: 3b5b94ceab
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (build_conflict_set): Replace variable dynamic array.
--
Note that clang complained that CONFLICT_SET_COUNT could be negative.
Thus I added an assert.
Signed-off-by: Werner Koch <wk@gnupg.org>
