* g10/gpg.c (aShowKeys): New const.
(opts): New command --show-keys.
(main): Implement command.
* g10/import.c (import_keys_internal): Don't print stats in show-only
mode.
(import_one): Be silent in show-only mode.
--
Using
--import --import-options show-only
to look at a key is too cumbersome. Provide this shortcut and also
remove some diagnostic cruft in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/compress.c (push_compress_filter2): Return an error if no filter
was pushed.
(push_compress_filter): Ditto.
(handle_compressed): Free CFX if no filter was pushed.
* g10/import.c (read_block): Ditto.
--
GnuPG-bug-id: 3898, 3930
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_symkey_enc): Add field aead_algo.
* g10/build-packet.c (do_symkey_enc): Support version 5 packets.
* g10/parse-packet.c (parse_symkeyenc): Ditto.
* g10/encrypt.c (encrypt_symmetric): Force using a random session
key in AEAD mode.
(encrypt_seskey): Add and support arg aead_algo.
(write_symkey_enc): Ditto.
(encrypt_simple): Adjust accordingly.
(encrypt_filter): Ditto.
* g10/gpgcompose.c (sk_esk): For now call encrypt_seskey without AEAD
support.
* g10/mainproc.c (symkey_decrypt_seskey): Support AEAD. Nver call BUG
but return an error.
(proc_symkey_enc): Call symkey_decrypt_seskey in a bug compatible way.
* g10/import.c (check_prefs): Check AEAD preferences.
* g10/keyedit.c (show_prefs): Print AEAD preferences.
--
For easier debugging this patch also changes some diagnostics to also
print the encryption mode with the cipher algorithm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): Pass FROM_SK to list_keyblock_direct.
--
Note that this will likely add the suffix '#' top "sec" because the
secret key has not yet (or will not be) imported. If the secret key
already exists locally another suffix might be printed. The upshot is
that the suffix has no usefulness.
GnuPG-bug-id: 3431
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_secret_one): Check for dry-run before
transferring keys.
--
The use of --dry-run or --import-option show-only had no effect when
importing a secret key and the public key already existed. If the
public key did not exist an error message inhibited the import of the
secret key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (get_pubkey_byfprint_fast): Factor most code out to ...
(get_keyblock_byfprint_fast): .. new function.
* g10/import.c (revocation_present): s/int rc/gpg_error_t err/.
(import_one): Use get_keyblock_byfprint_fast to get the keyblock and a
handle. Remove the now surplus keyblock fetch in the merge branch.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_keys_internal): Return gpg_error_t instead of
int. Change var names.
(import_keys_es_stream): Ditto.
(import_one): Ditto. Use a single keydb_new and simplify the use of
of keydb_release.
--
Note that this opens a keydb handle before we call
get_pubkey_byfprint_fast which internally uses another key db handle.
A further patch will cleanup this double use. Note that we also
disable the keydb caching for the insert case.
The s/int/gpg_error_t/ has been done while checking the call chains of
the import functions and making sure that gpg_err_code is always used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (IMPORT_DRY_RUN): New.
* g10/import.c (parse_import_options): Add "show-only".
(import_one): use that as alternative to opt.dry_run.
--
This is just a convenience thing for
--import-options import-show --dry-run
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/key-check.c (key_check_all_keysigs): Add arg mode and change all
output calls to use it.
* g10/keyedit.c (keyedit_print_one_sig): Add arg fp and chnage all
output calls to use it.
(keyedit_menu): Adjust for changes.
* g10/gpgcompose.c (keyedit_print_one_sig): Add dummy arg fp.
* g10/import.c (import_one): Call key_check_all_keysigs with output to
the log stream.
--
Fixes-commit: 404fa8211b
GnuPG-bug-id: 3288
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (update_key_origin): New.
(merge_blocks): Add arg curtime.
(import_one): Pass curtime to merge_blocks. Call update_key_origin.
--
We probably need to refine the rules on how this is done. But it is a
start.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Rename to ...
(insert_key_origin): this. Factor code out to ...
(insert_key_origin_pk, insert_key_origin_uid): new funcs.
(import_one): Move insert_key_origin behind clean_key.
(merge_blocks): Add args options, origin, and url.
(append_uid): Rename to ...
(append_new_uid): this. Add args options, curtime, origin, and url.
Call insert_key_origin_uid for new UIDs.
--
This is a straightforward change to handle new user ids.
How to test:
With an empty keyring run
gpg --with-key-origin --locate-key \
--auto-key-locate clear,nodefault,wkd wk@gnupg.org
and then append a new keyid using
gpg --with-key-origin --locate-key \
--auto-key-locate clear,nodefault,wkd wk@g10code.com
Works with my current key 80615870F5BAD690333686D0F2AD85AC1E42B367.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_get_chunk): Use KEYORG_KS if request was
done by fingerprint.
* g10/import.c (apply_meta_data): Implement that.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (apply_meta_data): Remove arg 'merge'. Add arg 'url'.
Implement WKD and DANE key origin.
(import_keys_internal): Add arg 'url' and change all callers.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
* g10/keylist.c (list_keyblock_print): Fix update URL printing.
* g10/call-dirmngr.c (gpg_dirmngr_wkd_get): Add arg 'r_url' to return
the SOURCE. Pass ks_status_cb to assuan_transact.
* g10/keyserver.c (keyserver_import_wkd): Get that URL and pass it to
the import function.
--
Note that this only for new keys. Merging this info will be added
soon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (import_one): If option import-clean is set,
also clean on initial import, not only for merge.
Signed-off-by: Marcus Brinkmann <mb@g10code.com>
GnuPG-bug-id: 2401
* g10/import.c (import_keys_stream): Remove this unused function.
(import_keys_internal): Add arg origin.
(import_keys): Ditto.
(import_keys_es_stream): Ditto.
(import): Ditto.
(import_one): Ditto.
(apply_meta_data): New stub.
(import_secret_one): Pass 0 for ORIGIN.
* g10/keyserver.c (keyserver_get_chunk): For now pass 0 for ORIGIN.
(keyserver_fetch): Add arg origin.
(keyserver_import_cert): Pass KEYORG_DANE for ORIGIN.
(keyserver_import_wkd): Pass KEYORG_WKD for ORIGIN.
* g10/gpg.c (main): Pass OPT.KEY_ORIGIN to import_keys and
keyserver_fetch.
* g10/card-util.c (fetch_url): Pass KEYORG_URL for ORIGIN.
--
This is just the framework; applying the meta data will be done in
another commit.
GnuPG-bug-id: 3252
Signed-off-by: Werner Koch <wk@gnupg.org>
* doc/gpg.texi: Document the new import option.
* g10/gpg.c (main): Make the new option default to yes.
* g10/import.c (parse_import_options): Parse the new option.
(import_one): Act on the new option.
* g10/options.h (IMPORT_REPAIR_KEYS): New macro.
GnuPG-bug-id: 2236
Signed-off-by: Justus Winter <justus@g10code.com>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse_trust): Rename to ...
(parse_ring_trust): this. Change args and implement new ring trust
packet format.
(parse): Add special ring trust packet handling.
* g10/packet.h (PKT_user_id): New fields KEYUPDATE, UPDATEURL, and
KEYSRC.
(PKT_public_key): Ditto.
(RING_TRUST_SIG, RING_TRUST_KEY, RING_TRUST_UID): New consts.
(PKT_ring_trust): New.
(struct packet_struct): Remove member RING_TRUST.
(strcu parse_packet_ctx_s): Add field SKIP_META.
(init_parse_packet): Init SKIPT_META.
* g10/free-packet.c (release_public_key_parts): Free UDPATEURL.
(free_user_id): Ditto.
* g10/mainproc.c (list_node): Remove printing of non-documented "rtv"
lines.
* g10/build-packet.c (build_packet_and_meta): New.
(do_ring_trust): New.
* g10/export.c (write_keyblock_to_output): Use build_packet_and_meta
in backup mode.
(do_export_one_keyblock): Ditto.
* g10/import.c (read_block): Add arg WITH_META. Skip ring trust
packets if that ism not set.
(import): Call read_block WITH_META in restore mode.
* g10/keydb.h (KEYSRC_UNKNOWN, KEYSRC_FILE, KEYSRC_KS, KEYSRC_PREF_KS)
(KEYSRC_WKD, KEYSRC_WKD_SD, KEYSRC_DANE): New constants. They are not
yet used, though.
* g10/keydb.c (parse_keyblock_image): Allow ring trust packets.
(build_keyblock_image): Ditto. Use build_packet_and_meta.
* g10/keyring.c (keyring_get_keyblock): Remove specila treatment of
ring trust packets.
(write_keyblock): Use build_packet_and_meta. Remove special treatment
of ring trust packets and initialization of the signature caches.
--
This patch introduced the framework to store meta data for keys and
user ids in the keyrings/keyboxes. Ring trust packets are
implementation defined and have always been used in gpg to cache the
signature verification status.
Ring trust packets are only exported with the export option "backup"
and only imported with the import option "restore".
The new code uses a cleaner way to handle the ring trust packets: When
the parser reads a ring trust packet and the previously read packet
matches the type of that ring trust packet, the information is stored
in that previously read packet (signature, user id, or primary key)
and the next packet is read immediately. Thus only the parser sees
the ring trust packets. Ring trust packets are written by using the
new function build_packet_and_meta instead of build_packet. That
function writes a ring trust packet when the needed information is
available.
As a side-effect of this patch the signature status cache works again
and "gpg --check-sigs" is thus much faster.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct parse_packet_ctx_s): Add fields LAST_PKT and
FREE_LAST_PKT.
(init_parse_packet): Clear them.
(deinit_parse_packet): New macro. Change all users if
init_parse_packet to also call this macro.
* g10/free-packet.c (free_packet): Add arg PARSECTX and handle shallow
packet copies in the context. Change all callers.
* g10/parse-packet.c (parse): Store certain packets in the parse
context.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (struct parse_packet_ctx_s): New.
(parse_packet_ctx_t): New type.
(init_parse_packet): New macro.
* g10/parse-packet.c (parse_packet, dbg_parse_packet): Change to take
a parse context. Change all callers to provide a context instead of
directly supplying the input stream.
(search_packet, dbg_search_packet): Ditto.
(copy_all_packets, dbg_copy_all_packets): Init an use a parse context.
(copy_some_packets, dbg_copy_some_packets): Ditto.
(skip_some_packets, dbg_skip_some_packets): Ditto.
--
We will need this change to handle ring packets inside the parser.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (impex_filter_getval): Handle PKT_ATTRIBUTE the same as
PKT_USER_ID
(apply_drop_sig_filter): Ditto.
--
The old code was plainly wrong in that it considered PKT_ATTRIBUTE to
use a PKT_signature object.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/export.c (parse_export_options): Add "backup" and its alias
"export-backup".
(do_export_one_keyblock): Export ring trust packets in backup mode.
* g10/import.c (parse_import_options): Add "restore" and its alias
"import-restore".
(read_block): Import ring trust packets.
--
These options are intended to, well, backup and restore keys between
GnuPG implementations. These options may eventually be enhanced to
backup and restore all public key related information.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/tofu.c (initdb): Add column effective_policy to the bindings
table.
(record_binding): New parameters effective_policy and set_conflict.
Save the effective policy. If SET_CONFLICT is set, then set conflict
according to CONFLICT. Otherwise, preserve the current value of
conflict. Update callers.
(get_trust): Don't compute the effective policy here...
(get_policy): ... do it here, if it was not cached. Take new
parameters, PK, the public key, and NOW, the time that the operation
started. Update callers.
(show_statistics): New parameter PK. Pass it to get_policy. Update
callers.
(tofu_notice_key_changed): New function.
* g10/gpgv.c (tofu_notice_key_changed): New stub.
* g10/import.c (import_revoke_cert): Take additional argument CTRL.
Pass it to keydb_update_keyblock.
* g10/keydb.c (keydb_update_keyblock): Take additional argument CTRL.
Update callers.
[USE_TOFU]: Call tofu_notice_key_changed.
* g10/test-stubs.c (tofu_notice_key_changed): New stub.
* tests/openpgp/tofu.scm: Assume that manually setting a binding's
policy to auto does not cause the tofu engine to forget about any
conflict.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
We now store the computed policy in the tofu DB (in the
effective_policy column of the bindings table) to avoid computing it
every time, which is expensive. Further, policy is never overridden
in case of a conflict. Instead, we detect a conflict if CONFLICT is
not empty.
This change is backwards compatible to existing DBs. The only minor
incompatibility is that unresolved conflicts won't be automatically
resolved in case we import a direct signature, or cross signatures.
* g10/call-dirmngr.c (gpg_dirmngr_ks_get): Add arg 'quick'.
(gpg_dirmngr_wkd_get): Ditto.
* g10/keyserver.c (keyserver_get): Add arg 'quick'.
(keyserver_get_chunk): Add arg 'quick'.
(keyserver_import_fprint): Ditto. Change callers to pass 0 for it.
(keyserver_import_keyid): Ditto.
(keyserver_import_wkd): Ditto.
* g10/mainproc.c (check_sig_and_print): Call the 3 fucntions with
QUICK set.
--
Note that this option has not yet been implemented by dirmngr.
Dirmngr will simply ignore it for now.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/import.c (impex_filter_getval): Add properties for key packets.
* g10/export.c (export_drop_subkey): New var.
(cleanup_export_globals): Release that var.
(parse_and_set_export_filter): Add filter "drop-subkey".
(apply_drop_subkey_filter): New.
(do_export_stream): Run that filter.
Signed-off-by: Werner Koch <wk@gnupg.org>
* README, agent/command.c, agent/keyformat.txt, common/i18n.c,
common/iobuf.c, common/keyserver.h, dirmngr/cdblib.c,
dirmngr/ldap-wrapper.c, doc/DETAILS, doc/TRANSLATE,
doc/announce-2.1.txt, doc/gpg.texi, doc/gpgsm.texi,
doc/scdaemon.texi, doc/tools.texi, doc/whats-new-in-2.1.txt,
g10/export.c, g10/getkey.c, g10/import.c, g10/keyedit.c, m4/ksba.m4,
m4/libgcrypt.m4, m4/ntbtls.m4, po/ca.po, po/cs.po, po/da.po,
po/de.po, po/el.po, po/eo.po, po/es.po, po/et.po, po/fi.po,
po/fr.po, po/gl.po, po/hu.po, po/id.po, po/it.po, po/ja.po,
po/nb.po, po/pl.po, po/pt.po, po/ro.po, po/ru.po, po/sk.po,
po/sv.po, po/tr.po, po/uk.po, po/zh_CN.po, po/zh_TW.po,
scd/app-p15.c, scd/ccid-driver.c, scd/command.c, sm/gpgsm.c,
sm/sign.c, tools/gpgconf-comp.c, tools/gpgtar.h: replace "Allow to"
with clearer text.
In standard English, the normal construction is "${XXX} allows ${YYY}
to" -- that is, the subject (${XXX}) of the sentence is allowing the
object (${YYY}) to do something. When the object is missing, the
phrasing sounds awkward, even if the object is implied by context.
There's almost always a better construction that isn't as awkward.
These changes should make the language a bit clearer.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
'transfer_secret_keys' collects statistics on a subkey-basis, while
the other code does not. This leads to inflated numbers when
importing secret keys. E.g. 'count' is incremented by the main
parsing loop in 'import', and again in 'transfer_secret_keys', leading
to a total of 3 if one key with two secret subkeys is imported.
* g10/import.c (import_secret_one): Adjust to the fact that
'transfer_secret_keys' collects subkey statistics.
* tests/openpgp/Makefile.am (TESTS): Add new test.
* tests/openpgp/issue2346.scm: New file.
* tests/openpgp/samplekeys/issue2346.gpg: Likewise.
GnuPG-bug-id: 2346
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/export.c (do_export_stream): Move PKA and DANE printing helper
code to ...
(print_pka_or_dane_records): this fucntion.
(write_keyblock_to_output): Add arg OPTIOSN and call
print_pka_or_dane_records if requested.
--
It is now possible to print a DANE record given a a file with a key
without importing the key first:
gpg --export-options export-dane \
--import-options import-export \
--import-filter keep-uid='mbox =~ alpha' \
--import FILE_WITH_KEY
Using the filter we only print a user id with the substring "alpha" in
the addr-spec.
Signed-off-by: Werner Koch <wk@gnupg.org>
