* common/host2net.h (buf16_to_ulong, buf16_to_uint): New.
(buf16_to_ushort, buf16_to_u16): New.
(buf32_to_size_t, buf32_to_ulong, buf32_to_uint, buf32_to_u32): New.
--
Commit 91b826a388 was not enough to
avoid all sign extension on shift problems. Hanno Böck found a case
with an invalid read due to this problem. To fix that once and for
all almost all uses of "<< 24" and "<< 8" are changed by this patch to
use an inline function from host2net.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (GPG_ERR_OBJ_TERM_STATE): New.
* scd/iso7816.c (map_sw): Add this error code.
* scd/app-openpgp.c (do_getattr): Return the life cycle indicator.
* scd/app.c (select_application): Allow a return value of
GPG_ERR_OBJ_TERM_STATE.
* scd/scdaemon.c (set_debug): Print the DBG_READER value.
* g10/call-agent.c (start_agent): Print a status line for the
termination state.
(agent_scd_learn): Make arg "info" optional.
(agent_scd_apdu): New.
* g10/card-util.c (send_apdu): New.
(factory_reset): New.
(card_edit): Add command factory-reset.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_learn): Add option --sendinfo.
* agent/learncard.c (agent_handle_learn): Add arg "send" andsend
certifciate only if that is set.
* g10/call-agent.c (agent_scd_learn): Use --sendinfo. Make INFO
optional.
(agent_learn): Remove.
* g10/keygen.c (gen_card_key): Replace agent_learn by agent_scd_learn.
--
The requirement of using --card-status on the first use of card on a
new box is a bit annoying but the alternative of always checking
whether a card is available before a decryption starts does not sound
promising either.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_export_key): Actually implement the cache_nonce
feature.
* g10/export.c (do_export_stream): Make use of a cache_nonce.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c (agent_scd_learn): Rename from agent_learn.
(agent_learn): New.
* g10/keygen.c (gen_card_key): Call new agent-learn.
--
Without a shadow key we can't create the self-signatures. Thus we
need to issue the learn command after each key generation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/call-agent.c, g10/call-agent.h (agent_get_version): New.
* g10/migrate.c (migrate_secring): Abort migration if
agent_get_version returns not at least 2.1.0
--
GnuPG-bug-id: 1718
On the first installation of GnuPG 2.1 it is likely that an
old gpg-agent is still running in the environment. In that
case the migration would fail.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/gpg.c: Add option --with-secret.
* g10/options.h (struct opt): Add field with_secret.
* g10/keylist.c (public_key_list): Pass opt.with_secret to list_all
and list_one.
(list_all, list_one): Add arg mark_secret.
(list_keyblock_colon): Add arg has_secret.
* sm/gpgsm.c: Add option --with-secret.
* sm/server.c (option_handler): Add option "with-secret".
* sm/gpgsm.h (server_control_s): Add field with_secret.
* sm/keylist.c (list_cert_colon): Take care of with_secret. Also move
the token string from the wrong field 14 to 15.
--
This option is useful for key managers which need to know whether a
key has a secret key. This change allows to collect this information
in one pass.
* agent/cvt-openpgp.c (get_keygrip, convert_secret_key)
(convert_transfer_key): Follow newer (>= 1.6) libgcrypt API, which
does not distinguish the detail.
(do_unprotect, convert_from_openpgp_main): Don't call
map_pk_openpgp_to_gcry, as it's the value of libgcrypt API already and
not the value defined by OpenPGP.
(convert_to_openpgp): It's "ecc".
* agent/gpg-agent.c (map_pk_openpgp_to_gcry): Remove.
* g10/call-agent.c (agent_pkdecrypt): Fix off-by-one error.
* g10/pubkey-enc.c (get_it): Fix swapping the fields error.
* g10/call-agent.c (check_hijacking): New.
(start_agent): Call it.
(membuf_data_cb, default_inq_cb): Move more to the top.
--
Note that GUIs may use the gpg status line
[GNUPG:] ERROR check_hijacking 33554509
to detect this and print an appropriate warning.
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_import_key): Add option --unattended.
* agent/cvt-openpgp.c (convert_transfer_key): New.
(do_unprotect): Factor some code out to ...
(prepare_unprotect): new function.
(convert_from_openpgp): Factor all code out to ...
(convert_from_openpgp_main): this. Add arg 'passphrase'. Implement
openpgp-native protection modes.
(convert_from_openpgp_native): New.
* agent/t-protect.c (convert_from_openpgp_native): New dummy fucntion
* agent/protect-tool.c (convert_from_openpgp_native): Ditto.
* agent/protect.c (agent_unprotect): Add arg CTRL. Adjust all
callers. Support openpgp-native protection.
* g10/call-agent.c (agent_import_key): Add arg 'unattended'.
* g10/import.c (transfer_secret_keys): Use unattended in batch mode.
--
With the gpg-agent taking care of the secret keys, the user needs to
migrate existing keys from secring.gpg to the agent. This and also
the standard import of secret keys required the user to unprotect the
secret keys first, so that gpg-agent was able to re-protected them
using its own scheme. With many secret keys this is quite some
usability hurdle. In particular if a passphrase is not instantly
available.
To make this migration smoother, this patch implements an unattended
key import/migration which delays the conversion to the gpg-agent
format until the key is actually used. For example:
gpg2 --batch --import mysecretkey.gpg
works without any user interaction due to the use of --batch. Now if
a key is used (e.g. "gpg2 -su USERID_FROM_MYSECRETKEY foo"), gpg-agent
has to ask for the passphrase anyway, converts the key from the
openpgp format to the internal format, signs, re-encrypts the key and
tries to store it in the gpg-agent format to the disk. The next time,
the internal format of the key is used.
This patch has only been tested with the old demo keys, more tests
with other protection formats and no protection are needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
This works by specifying the keygrip instead of an algorithm (section
number 13) and requires that the option -expert has been used. It
will be easy to extend this to the primary key.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
This was a regression in 2.1 introduced due to having the agent do the
signing in contrast to the old "SCD PKSIGN" command which accesses the
scdaemon directly and passed the hash algorithm. The hash algorithm
is used by app-openpgp.c only for a sanity check.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
