* gpgscm/scheme.c (gc_reservation_failure): Fix adding ";".
[!NDEBUG] (scheme_init_custom_alloc): Don't init seserved_lineno.
--
Picked from libgpg-error commit of:
8a9397896fd202dcfb3fb46259e43bc05a0ddd2e
In some build environment, NDEBUG is defined (although it's
bad practice). This change supports such a situation.
GnuPG-bug-id: 3959
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/scheme.c (CASE): Use unused attribute for GCC > 6.
(FALLTHROUGH): New for fallthrough.
(Eval_Cycle): Use FALLTHROUGH. Remove not-needed comment of
fallthrough.
--
Since GCC combines C preprocessor macro expansion, the fallthrough
comment doesn't work well to suppress warnings for
-Wimplicit-fallthrough, near the macro CASE. To handle this
problem, we use GCC's extension of unused label and fallthrough
attributes.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/gnupg.scm (with-ephemeral-home-directory): Add
teadown-fn.
* tests/gpgsm/export.scm: Use -no-atexit version and stop-agent.
* tests/openpgp/decrypt-session-key.scm: Likewise.
* tests/openpgp/decrypt-unwrap-verify.scm: Likewise.
* tests/openpgp/defs.scm (have-opt-always-trust): Likewise.
(setup-environment-no-atexit): New.
(start-agent): Support no use of atexit.
* tests/gpgsm/gpgsm-defs.scm (setup-gpgsm-environment-no-atexit): New.
* tests/migrations/common.scm (untar-armored): Follow the change
of with-ephemeral-home-directory.
--
When gpg-agent detects homedir removal, it will automatically exit.
Then, call of 'gpgconf --kill all' will fail. So, stop-agent should
be called before the removal of homedir.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/scheme.c (CASE): Rearrange so that the case statement
is at the front.
(Eval_Cycle): Improve fallthrough annotations.
Signed-off-by: Justus Winter <justus@g10code.com>
* configure.ac: New option --enable-all-tests.
* tests/gpgscm/ffi.c (ffi_init): New gloabl var *run-all-tests*.
* tests/openpgp/all-tests.scm (all-tests): Use that var instead
of *maintainer-mode*.
* Makefile.am (AM_DISTCHECK_CONFIGURE_FLAGS): Add --enable-all-tests.
--
It is better to have a separate option to run all tests than to put
this on top of --enable-maintainer-mode. This way we can also make
sure to run all tests during "make distcheck".
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/tests.scm (test-pool): Add delimiter lines.
--
This is to make those summaries a bit more simlar to those from
automake.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Leak the maintainer mode flag into 'config.h'.
* tests/gpgscm/ffi.c: Pass it into the scheme environment.
* tests/openpgp/all-tests.scm: Only run tests against non-default
configurations (keyring, extended-key-format) in maintainer mode.
--
Werner is concerned that the tests do take up too much time and asked
me to reduce the runtime of the tests for normal users.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/repl.scm (prompt-yes-no?): New function.
* tests/gpgscm/tests.scm (pathsep-split): Likewise.
(pathsep-join): Likewise.
(with-path): Use the new function.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/init.scm (throw'): Make it impossible to catch
'*interpreter-exit*'. This fixes 'exit' (and with it 'fail') inside
'catch' statements.
Signed-off-by: Justus Winter <justus@g10code.com>
* ffi.c (do_wait_processes): Suppress the timeout error.
* tests.scm (semaphore): New definition.
(test-pool): Only run a bounded number of tests in parallel.
(test::started?): New function.
(run-tests-parallel): Do not report results, do not start the tests.
(run-tests-sequential): Adapt.
(run-tests): Parse the number of parallel jobs.
--
This change limits the number of tests that are run in parallel. This
way we do not overwhelm the operating systems' scheduler. As a
side-effect, we also get more accurate runtime information, and it
will be easy to implement timeouts on top of this.
Use TESTFLAGS to limit the number of jobs:
$ make check-all TESTFLAGS=--parallel=16
Signed-off-by: Justus Winter <justus@g10code.com>
* Makefile.am (TESTS_ENVIRONMENT): New variable.
(check-all): New phony target to run all tests.
* tests/gpgme/gpgme-defs.scm (have-gpgme?): New function that tests
whether the GPGME test suite is available instead of exiting the
process.
* tests/gpgscm/init.scm (export): New macro.
* tests/gpgscm/tests.scm (run-tests): New function.
(load-tests): Likewise.
* tests/gpgme/run-tests.scm: Simplify and move the parsing of the list
of tests to 'all-tests.scm'.
* tests/gpgsm/run-tests.scm: Likewise.
* tests/migrations/run-tests.scm: Likewise.
* tests/openpgp/run-tests.scm: Likewise.
* tests/gpgme/Makefile.am: To select the tests to run, use the
variable 'TESTS'. This harmonizes the interface with the automake
test suite.
* tests/gpgsm/Makefile.am: Likewise.
* tests/migrations/Makefile.am: Likewise.
* tests/openpgp/Makefile.am: Likewise.
* tests/openpgp/README: Likewise.
* agent/all-tests.scm: New file.
* common/all-tests.scm: Likewise.
* g10/all-tests.scm: Likewise.
* g13/all-tests.scm: Likewise.
* tests/gpgme/all-tests.scm: Likewise.
* tests/gpgsm/all-tests.scm: Likewise.
* tests/migrations/all-tests.scm: Likewise.
* tests/openpgp/all-tests.scm: Likewise.
* tests/run-tests.scm: Likewise.
--
This change allows us to run all tests in parallel and write one XML
report capturing the results of every test. It also lays the
foundation to parametrize test suites.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (test-pool): Rework reporting. Filter using
the computed test status instead of the return value. Also print the
new categories 'failed expectedly' and 'passed unexpectedly'.
(test): If a test ends with a bang (!), it is expected to fail. Adapt
status, status-string, and xml accordingly.
--
Allow tests to be marked as being expected to fail by appending a bang
(!) to the tests name. If such a test fails, it will not be counted
as failure, but will still be prominently displayed in the report. If
it succeeds unexpectedly, this is counted as a failure.
Fixes T3134.
GnuPG-bug-id: 3134
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (struct scheme): New field
'frame_freelist'.
* tests/gpgscm/scheme.c (enum scheme_types): New type 'T_FRAME'.
(type_to_string): Handle new type.
(settype): New macro.
(gc_disable): Make sure there is at least one frame in the free list.
(mark): Handle frame objects.
(finalize_cell): Likewise.
(dump_stack_initialize): Initialize free list.
(dump_stack_free): Simplify.
(frame_length): New variable.
(dump_stack_make_frame): New function.
(frame_slots): Likewise.
(frame_payload): New macro.
(dump_stack_allocate_frame): New function.
(dump_stack_deallocate_frame): Likewise.
(dump_stack_preallocate_frame): Likewise.
(_s_return): Unpack frame object and deallocate it.
(s_save): Wrap state in an frame object.
(dump_stack_mark): Mark the free list.
--
TinySCHEME being a SECD-machine needs to push frames onto the dump
stack. Previously, the dump stack was a list. This required four
cells for the spine, as well as up to one additional cell to encode
the current opcode. This was quite inefficient despite the fact that
we recovered the spine as well as the integer cell.
We introduce frame objects, which are a special variant of vectors of
length four. Since the length is fixed, this frees up the length
field of the vector object to store the unboxed opcode. A frame
object now fits in two cells.
Saving two or three cells is a mere byproduct, the performance gain
comes from increased locality, unboxed opcode representation, and the
ability to easily put the objects in a free list, keeping the garbage
collector out of the continuous motion of the virtual machine.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (struct scheme): Remove field 'op'.
* tests/gpgscm/scheme.c (opexe_0): Inline into 'Eval_Cycle'.
(_Error_1): Return the opcode to evaluate next.
(Error_1): Do not return, but set the opcode and goto dispatch.
(Error_0): Likewise.
(s_goto): Likewise.
(s_return): Likewise.
(s_return_enable_gc): Likewise.
(s_thread_to): Remove superfluous cast.
(_s_return): Return the opcode to evaluate next.
(scheme_init_custom_alloc): Adapt to removal of field 'op'.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (finalize_cell): Use switch, return whether
the cell may be freed.
(gc): Update callsite.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/init.scm (throw'): If the first argument to the error
is a string, display it as such.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (call-with-io): When being verbose, include
the pid in the output, and avoid duplicating the command arguments.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/tests.scm (test-pool, tests): Previously, these methods
updated objects by creating new updated copies of the object being
manipulated. This made the code awkward without any benefit,
therefore I change it to just update the object.
Signed-off-by: Justus Winter <justus@g10code.com>
--
Locate every resource and every script used in the tests using a path
relative to the top of the source tree.
This is a purely mechanical change, mostly done using regular
expressions, with a few manual fixups here and there.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (CELL_MINRECOVER): New macro.
* tests/gpgscm/scheme.c (_get_cell): Move the heuristic to get more
cells...
(gc): ... here where every caller benefits from the optimization.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (with-home-directory,
with-ephemeral-home-directory): Move...
* tests/gpgscm/gnupg.scm: ... to this new file.
* tests/gpgscm/main.c (main): Load the new file.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_0): Consider 'op', not 'sc->op'. The
former is the opcode we are currently executing.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/main.c (load): Try to mmap the script.
* tests/gpgscm/scheme.c (scheme_load_memory): New function, a
generalization of 'scheme_load_string'.
* tests/gpgscm/scheme.h (scheme_load_memory): New prototype.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (op_code_info): Fix type, add forward
declaration.
(check_arguments): New function.
(Eval_cycle): Use the new function.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/opdefines.h: Make tags mandatory.
* tests/gpgscm/scheme.c: Likewise.
* tests/gpgscm/scheme.h: Likewise.
--
Tags provide a constant-time lookup mechanism for almost every object.
This is useful for the interpreter itself, and the code for tags is
tiny.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_6): Merge into 'opexe_0'.
* tests/gpgscm/opdefines.h: Adapt.
--
Having separate functions to execute opcodes reduces our ability to
thread the code and prevents the dispatch_table from being moved to
rodata.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_5): Merge into 'opexe_0'.
* tests/gpgscm/opdefines.h: Adapt.
--
Having separate functions to execute opcodes reduces our ability to
thread the code and prevents the dispatch_table from being moved to
rodata.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme.c (opexe_4): Merge into 'opexe_0'.
* tests/gpgscm/opdefines.h: Adapt.
--
Having separate functions to execute opcodes reduces our ability to
thread the code and prevents the dispatch_table from being moved to
rodata.
Signed-off-by: Justus Winter <justus@g10code.com>
