* scd/scdaemon.c (ENAMETOOLONG): New.
(redir_socket_name): New.
(cleanup): Take care of a redirected socket.
(main): Pass redir_socket_name to create_server_socket.
(create_socket_name): Remove superfluous length check.
(create_server_socket): Add arg r_redir_name and implement
redirection. Replace assert for older Assuan by an error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Also fixed some of my own copyright notices due to the termination of
my assignment. The one displayed by --version is kept at FSF because
we had contributors in 2014 with FSF assignments and it gives the FSF
some visibility.
* agent/agent.h (opt): Remove field use_standard_socket.
* agent/command.c (cmd_killagent): Always allow killing.
* agent/gpg-agent.c (main): Turn --{no,}use-standard-socket and
--write-env-file into dummy options. Always return true for
--use-standard-socket-p. Do not print the GPG_AGENT_INFO envvar
setting or set that envvar.
(create_socket_name): Simplify by removing non standard socket
support.
(check_for_running_agent): Ditto.
* common/asshelp.c (start_new_gpg_agent): Remove GPG_AGENT_INFO use.
* common/simple-pwquery.c (agent_open): Ditto.
* configure.ac (GPG_AGENT_INFO_NAME): Remove.
* g10/server.c (gpg_server): Do not print the AgentInfo comment.
* g13/server.c (g13_server): Ditto.
* sm/server.c (gpgsm_server): Ditto.
* tools/gpgconf.c (main): Simplify by removing non standard socket
support.
--
The indented fix to allow using a different socket than the one in the
gnupg home directory is to change Libassuan to check whether the
socket files exists as a regualr file with a special keyword to
redirect to another socket file name.
* scd/app-sc-hsm.c: Re-indendet some parts and set some vars to NULL
after xfree for improbed robustness.
(read_ef_prkd): Replace serial operator by blocks for better
readability.
(apply_PKCS_padding): Rewrite for easier auditing.
(strip_PKCS15_padding): Ditto. Add stricter check on SRCLEN.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-sc-hsm.c (select_and_read_binary): Use SW_ macro.
(parse_certid): Remove useless test.
(send_certinfo, send_keypairinfo): Shrink malloc to the needed size.
(do_getattr): Ditto.
(verify_pin): Use SW_ macro.
(do_decipher): Replace OFS variable and extend comment.
--
Code parts which have not been audited are marked with a warning
pragma.
* scd/app-sc-hsm.c: New.
* scd/app.c (select_application, get_supported_applications): Register
new app.
--
Add a read/only driver for scdaemon that provides access to keys and
certificates on a SmartCard-HSM (www.smartcard-hsm.com).
The driver supports RSA and ECC keys on SmartCard-HSM cards and
USB-Sticks.
The driver does not yet support the MicroSD edition.
--
ChangeLog and FSF copyright year fix by wk.
* scd/ccid-driver.h (VENDOR_REINER, CYBERJACK_GO): New.
* scd/ccid-driver.c (ccid_transceive_secure): Handle the case for
VENDOR_REINER. Original work was by Alina Friedrichsen (tiny change).
--
This is revised version which adapts changes of ccid-driver and was
later ported from branch-2.0 to master (2.1)
* configure.ac (HAVE_NPTH): New ac_define.
* common/estream.c: Use USE_NPTH instead of HAVE_NPTH.
* common/http.c: Ditto. Replace remaining calls to pth by npth calls.
(connect_server): Remove useless _().
* common/exechelp-posix.c, common/exechelp-w32.c
* common/exechelp-w32ce.c: Use HAVE_PTH to include npth.h.
* common/init.c (_init_common_subsystems): Remove call to pth_init.
* common/sysutils.c (gnupg_sleep): Use npth_sleep.
* scd/ccid-driver.c (my_sleep): Ditto.
--
USE_NPTH is used in case were we may build with and without nPth. The
missing definition HAVE_NPTH didn't allowed us to build outher sources
with nPTh support.
* scd/app-openpgp.c (KEY_TYPE_EDDSA, CURVE_ED25519): New.
(struct app_local_s): Add eddsa.
(get_algo_byte, store_fpr): Support KEY_TYPE_EDDSA.
(get_ecc_key_parameters, get_curve_name): Support CURVE_ED25519.
(send_key_attr, get_public_key): Support KEY_TYPE_EDDSA.
(build_ecc_privkey_template): Rename as it supports both of
ECDSA and EdDSA.
(ecc_writekey): Rename. Support CURVE_ED25519, too.
(do_writekey): Follow the change of ecc_writekey.
(do_auth): Support KEY_TYPE_EDDSA.
(parse_ecc_curve): Support CURVE_ED25519. Bug fix for other curves.
(parse_algorithm_attribute): Bug fix for ECDH. Support EdDSA.
* scd/apdu.c (new_reader_slot): Acquire lock.
(open_ct_reader, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, open_rapdu_reader): Release lock.
(lock_slot, trylock_slot, unlock_slot): Move more to the top.
--
Fixes a test case of:
No libpcsclite1 installed.
Run gpg-agent
Run command "gpg-connect-agent learn /bye" with no card/token
Sometimes it fails: ERR 100663356 Not supported <SCD>
While it should be always: ERR 100663404 Card error <SCD>
(cherry picked from commit 4f557cb9c2)
Resolved conflicts:
scd/apdu.c: pth/npth changes. Move lock helpers to the top.
Take care of removed pcsc_no_service.
* scd/pcsc-wrapper.c [__APPLE__]: Fix syntax error.
--
For W32 and probably for Cygwin we don't need the wrapper, thus the
problems does not exhibit itself.
(cherry picked from commit 8ddf604659)
* scd/scdaemon.c (opts): Ignore --disable-keypad.
--
The renaming of --disable-keypad to --disable-pinpad might mess up
configuration files managed with a GUI. The GUI does not not anymore
know about the old option and would allow the user to switch
"disable-pinpad" on. However, a "disable-keypad" might still linger
in the conf file with gpgconf not knowing about it. Thus the conf
file would always be rejected and manual intervention would be
required. Ignoring the old option nicely solves the problem.
(cherry picked from commit e24e92d7e2)
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* scd/apdu.c (check_pcsc_pinpad): Set ->minlen and ->maxlen only when
those are specified.
(pcsc_pinpad_modify): Remove old check code.
--
GnuPG-bug-id: 1549
* scd/apdu.c (open_pcsc_reader_direct): Don't call
pcsc_vendor_specific_init here, but...
(connect_pcsc_card): Call it here.
--
Thanks to Martin Wolters for the bug report.
* scd/ccid-driver.c: Move vendor and product ids to ...
* scd/ccid-driver.h: here.
* scd/apdu.c (CCID_DRIVER_INCLUDE_USB_IDS): Define to include ids.
(pcsc_vendor_specific_init): Use vendor and product id macros.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_writekey): Added RSA_CRT and RSA_CRT_N support.
--
Updates of original patch by wk:
- unsigned char *rsa_u, *rsa_dp, rsa_dq;
+ unsigned char *rsa_u, *rsa_dp, *rsa_dq;
and AUTHORS. Missing signed-off-by assumed due to DCO send the other
day.
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_preset_passphrase, pinentry_loopback): Use %zu
in format string.
* scd/ccid-driver.c (ccid_get_atr): Ditto.
* agent/command-ssh.c (stream_read_string): Init arg STRING_SIZE to
avoid maybe_unitialized warning.
--
Actually the first one might have been a problem on big endian
machines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (CM_IOCTL_GET_FEATURE_REQUEST): Use SCARD_CTL_CODE.
(SCARD_CTL_CODE): Define if not defined.
(reader_table_s): Add is_spr532.
(new_reader_slot): Clear it.
(check_pcsc_pinpad): Set it.
(pcsc_pinpad_verify, pcsc_pinpad_modify): Add fix for SPR532.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (update_reader_status_file): Add condition
vr->status == 0.
--
To reproduce the bug: (1) insert card,
(2) run "gpg2 --card-status",
(3) remove card, (4) invoke "gpg2 --card-edit",
(5) invoke some command like "verify"
The last step fails (but with no error message to user).
* scd/apdu.c (pcsc_dword_t): New. It was named as DWORD (double-word)
when a word was 16-bit.
(struct reader_table_s): Fixes for types.
(struct pcsc_readerstate_s) [__APPLE__]: Enable #pragma pack(1).
Throughout: Fixes for types.
* scd/pcsc-wrapper.c: Likewise.
--
Problem reported for 1.4.x by the issue 1358.
* scd/apdu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Default value
of maxlen for pinpad input is now 15 (was: 25).
* scd/ccid-driver.c (ccid_transceive_secure): Likewise.
--
For newer PC/SC, it is better to use FEATURE_GET_TLV_PROPERTIES to get
bMaxPINSize.
* scd/ccid-driver.c (ccid_transceive_apdu_level): Support larger
APDU.
--
This is still ad hoc change, but it's OK. Supporting full extended
APDU exchange level is not worth yet.
* scd/app-openpgp.c (do_sign): Only prepend message digest block
for RSA or do_auth.
(do_auth): Remove message digest block for ECDSA.
--
If we don't need to check the message digest block by SCDaemon, we
don't requite the message digest block for ECDSA by gpg-agent.
* scd/app-openpgp.c (key_type_t): New.
(CURVE_NIST_P256, CURVE_NIST_P384, CURVE_NIST_P521): New.
(struct app_local_s): Change keyattr to have key_type and union.
(get_ecc_key_parameters, get_curve_name): New.
(send_key_attr, get_public_key): Support ECDSA.
(build_privkey_template, do_writekey, do_genkey): Follow the change
of the member KEY_ATTR.
(parse_historical): New.
(parse_algorithm_attribute): Support ECDSA.
--
Add ECDSA support to OpenPGP card.
* scd/app-openpgp.c (struct app_local_s): Remove VARLEN.
(parse_login_data): "P=0" means to disable pinpad.
(check_keypad_request): Default is to use pinpad if available.
* scd/ccid-driver.c: Add 2013.
(VENDER_VEGA, VEGA_ALPHA):New.
(ccid_transceive_secure): VEGA_ALPHA is same firmware as GEMPC_PINPAD.
Change bNumberMessage to 0x01, as it works better (was: 0xff).
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
* scd/apdu.c (pcsc_no_service): Remove.
(open_pcsc_reader_direct, open_pcsc_reader_wrapped): Remove
pcsc_no_service support.
(apdu_open_reader): Remove R_NO_SERVICE.
* scd/apdu.h (apdu_open_reader): Remove R_NO_SERVICE.
* scd/command.c (reader_disabled): Remove.
(get_current_reader): Follow the change of R_NO_SERVICE.
(open_card, cmd_serialno, scd_command_handler): Remove reader_disabled
support.
* scd/sc-copykeys.c (main): Follow the change of R_NO_SERVICE.
--
Daemon should handle all possible cases. Even if such a difficult
case like reader_disabled, it should not exit.
* scd/command.c (update_reader_status_file): Don't call
get_current_reader.
--
This fix has a impact that the insertion of a card reader will not be
detected upon the insertion, but will be deferred until user tries to
access his card.
* scd/command.c (MAXLEN_SETDATA): New.
(cmd_setdata): Add option --append.
* agent/call-scd.c (agent_card_pkdecrypt): Use new option for long
data.
* scd/app-openpgp.c (struct app_local_s): Add field manufacturer.
(app_select_openpgp): Store manufacturer.
(do_decipher): Print a note for broken cards.
--
Please note that I was not able to run a full test because I only have
broken cards (S/N < 346) available.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
When the KILLSCD command had been sent a race condition would occur
causing PID -1 getting killed, which on Linux seems to terminate all
applications for the current user.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* agent/gpg-agent.c (get_agent_ssh_socket_name): Use
INVALID_HANDLE_VALUE instead of 0.
(handle_signal) [!HAVE_W32_SYSTEM]: Don't define.
(handle_connections): Port Windows code to NPTH.
* dirmngr/dirmngr.c (handle_connections): Port Windows code to NPTH.
* g13/g13.c (handle_connections): Port Windows code to NPTH.
* scd/scdaemon.c (handle_connections): Port Windows code to NPTH.
* scd/apdu.c (ccid_keypad_operation): Rename from ccid_keypad_verify.
(open_ccid_reader): Use ccid_keypad_operation for verify and modify.
* scd/ccid-driver.c (VENDOR_VASCO, VASCO_920): New.
(ccid_transceive_apdu_level): Permit sending packet where
apdulen <= 289. Support receiving packets in a chain.
(ccid_transceive_secure): Maximum is 15 for VASCO DIGIPASS 920.
Support keypad_modify method such as CHANGE_REFERENCE_DATA: 0x24.
* common/dotlock.c (use_hardlinks_p, dotlock_take_unix): Check return
value of link().
* g13/g13.c: Make sure err is initialized.
* scd/scdaemon.c (main) [!USE_GCRY_THREAD_CBS]: Do not define ERR.
* agent/gpg-agent.c, dirmngr/dirmngr.c, g13/g13.c, scd/scdaemon.c
(USE_GCRY_THREAD_CBS): New macro, defined if
GCRY_THREAD_OPTION_VERSION is 0.
(fixed_gcry_pth_init) [!USE_GCRY_THREAD_CBS]: Don't define.
(main) [!USE_GCRY_THREAD_CBS]: Do not install thread callbacks.
* scd/apdu.c (apdu_connect): Do not test for zero atrlen.
--
When gpg-agent prompts for insertion of a card this error would be
returned.
Co-authored-by: Ben Kibbey <bjk@luxsci.net>
* scd/app.c (select_application): Reorder application tests.
--
Although the DINSIG application is available on most German cards, it
is in reality not used. Thus showing the Geldkarte application is
more desirable for a good user experience.
* scd/command.c (update_card_removed): Do no act on an invalid VRDR.
(do_reset): Ignore apdu_reset error codes for no and inactive card.
Close the reader before setting the slot to -1.
(update_reader_status_file): Notify the application before closing the
reader.
--
With this change the scd now works as it did in the past. In
particular there is no more endless loop trying to open the reader by
the update_reader_status_file ticker function. That bug basically
blocked all card operations until the scdaemon was killed.
* scd/scdaemon.c (oDebugAssuanLogCats): New.
(opts): Add option --debug-assuan-log-cats.
(main): Implement option.
* common/asshelp.c (set_libassuan_log_cats): New.
--
The old way of setting the logging categories with an environment
variable is awkward if sdaemon is spawned from a running gpg-agent.
The vreader table makes the code more clear by explicitly talking
about APDU slots and reader indices. It also accommodates for future
extensions.
* scd/scdaemon.h (server_control_s): Remove READER_SLOT.
* scd/scdaemon.c (scd_init_default_ctrl): Do not init READER_SLOT.
* scd/app.c (check_application_conflict): Add arg SLOT.
* scd/command.c (slot_status_s): Rename to vreader_s.
(server_local_s): Add field VREADER_IDX as replacement for
the READER_SLOT in server_control_s. Change all users.
(slot_table): Rename to vreader_table. Change all users.
(vreader_slot): New.
(do_reset, cmd_apdu): Map vreader to apdu slot.
(get_reader_slot): Rename to get_current_reader. Return -1 on error.
(open_card): Map vreader toapdu slot. Pass slot to
check_application_conflict.
(scd_command_handler): Init VREADER_IDX.
(update_reader_status_file): Reset SLOT field on error.
* scd/apdu.c (apdu_connect): Return status codes for no card available
and inactive card.
* scd/command.c (TEST_CARD_REMOVAL): Also test for GPG_ERR_CARD_RESET.
(open_card): Map apdu_connect status to GPG_ERR_CARD_RESET.
* apdu.c (pcsc_keypad_verify): Have dummy Lc field with value 0.
(pcsc_keypad_modify): Likewise.
(pcsc_keypad_modify): It's only for ISO7816_CHANGE_REFERENCE_DATA.
bConfirmPIN value is determined by the parameter p0.
* app-openpgp.c (do_change_pin): The flag use_keypad should be 0 when
reset_mode is on, or resetcode is on. use_keypad only makes sense for
iso7816_change_reference_data_kp.
* iso7816.h (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* iso7816.c (iso7816_put_data_kp): Remove.
(iso7816_reset_retry_counter_kp): Remove.
(iso7816_reset_retry_counter_with_rc_kp): Remove.
(iso7816_change_reference_data_kp): Add an argument: IS_EXCHANGE.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
Before this change, it is layered like following:
iso7816_verify
iso7816_verify_kp
apdu_send_simple, apdu_send_simple_kp
...
After this change, it will be layered like:
iso7816_verify iso7816_verify_kp
apdu_send_simple apdu_keypad_verify
...
and apdu_send_simple_kp will be deprecated.
For PC/SC API, we use:
SCardControl API to compose CCID PC_to_RDR_Secure message
SCardTransmit API to compose CCID PC_to_RDR_XfrBlock message
Considering the support of PC/SC, we have nothing to share between _kp
version of iso7816_* and no _kp version.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
This is not a part of pin pad support series of mine.
As I found the bug while I am preparing the patches, I report this.
As CCID protocol is little endian, wLangId of US English = 0x0409
is represented as two bytes of 0x09 then 0x04.
It is really confusing that the code like following is floating
around:
pin_verify -> wLangId = HOST_TO_CCID_16(0x0904);
But, it is 0x0409 (not 0x0904). It is defined in the documentation:
http://www.usb.org/developers/docs/USB_LANGIDs.pdf
and origin of this table is Microsoft. We can see it at:
http://msdn.microsoft.com/en-us/library/bb165625%28VS.80%29.aspx
Yes, it would be better not to hard-code 0x0409. It would be better
to try current locale of the user, or to use the first entry of string
descriptor. I don't have time to implement such a thing...
This solves a problem where ccid was used, the card unplugged and then
scdaemon tries to find a new (plugged in) reader and thus will
eventually try PC/SC over and over again.
Also added an explicit --kill command to gpgconf.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
From Grant Olsons's mail to gnupg-devel@:
This is three-quarters NIIBE and one-quarter me, but I though it would
be easier to have a single complete patch that applies to
STABLE-BRANCH-2-0 than two patches floating around.
This is basically NIIBE Yatuka's patch here:
http://lists.gnupg.org/pipermail/gnupg-devel/2010-November/025828.html
Plus another check that closes down the reader explicitly if we get a
SW_HOST_NO_READER error, so that an unplugged reader doesn't hold onto
the first slot, preventing us from getting to the active plugged reader.
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (start_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
scd/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
sm/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpgsm_server): Use assuan_fd_t and assuan_fdopen on
fds.
g10/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpg_server): Use assuan_fd_t and assuan_fdopen on fds.
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-pinentry.c (start_pinentry): Call assuan_pipe_connect, not
assuan_pipe_connect_ext.
* command.c (start_command_handler): Change
assuan_init_socket_server_ext into assuan_init_socket_server.
* call-scd.c (start_scd): Update use of assuan_socket_connect and
assuan_pipe_connect.
* gpg-agent.c (check_own_socket_thread, check_for_running_agent):
Update use of assuan_socket_connect.
common/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
scd/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Call assuan_init_socket_server,
not assuan_init_socket_server_ext.
sm/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* call-dirmngr.c (start_dirmngr_ext): Update use of
assuan_pipe_connect and assuan_socket_connect.
tools/
2009-11-05 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (start_agent): Update use of
assuan_socket_connect and assuan_pipe_connect.
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
common/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* get-passphrase.c (default_inq_cb, membuf_data_cb): Change return
type to gpg_error_t.
g10/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
scd/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
sm/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
* call-agent.c (membuf_data_cb, default_inq_cb)
(inq_ciphertext_cb, scd_serialno_status_cb)
(scd_keypairinfo_status_cb, istrusted_status_cb)
(learn_status_cb, learn_cb, keyinfo_status_cb): Return gpg_error_t.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
progress_cb and progress_cb_arg.
(ccid_set_progress_cb): New.
(print_progress): New.
(ccid_transceive): Call print_progress for wait time extensions.
* apdu.c (struct reader_table_s): Add field set_progress_cb.
(new_reader_slot): Clear that field.
(open_ccid_reader): Set it to ..
(set_progress_cb_ccid_reader): ... new fucntion.
* app.c (print_progress_line): New.
(lock_reader): Add arg CTRL to set a progress callback and
change all callers to provide it.
(unlock_reader): Remove the progress callback.
* scdaemon.c (main): Use estream_asprintf instead of asprintf.
* command.c (update_reader_status_file): Likewise.
(cmd_serialno): Use estream_asprintf instead of asprintf
and xfree instead of free to release memory allocated
through (estream_)asprintf.
(cmd_learn): Likewise.
(pin_cb): Likewise.
* app-openpgp.c (get_public_key): Likewise.
