* acinclude.m4 (GNUPG_GPG_DISABLE_ALGO): New.
* configure.ac: Add --enable-gpg-* options to disable non MUS
algorithms.
* g10/misc.c (map_cipher_openpgp_to_gcry): Implement these options.
(openpgp_pk_test_algo2): Ditto.
(map_md_openpgp_to_gcry): Ditto.
(openpgp_cipher_test_algo, openpgp_md_test_algo): Simplify.
--
We have a similar feature in GnuPG-1. Although we don't shrink the
size of the gpg binary by disabling algorithms (they are implemented
in Libgcrypt), this feature may still be useful for inerop testing.
* g10/misc.c (openpgp_pk_algo_name): Return a different string for
each ECC algorithm.
* g10/gpg.c (build_list_pk_test_algo): New wrapper to cope with the
different algo type enums.
(build_list_pk_algo_name): Ditto.
(build_list_cipher_test_algo): Ditto.
(build_list_cipher_algo_name): Ditto.
(build_list_md_test_algo): Ditto.
(build_list_md_algo_name): Ditto.
(my_strusage): Use them.
(list_config): Ditto. Add "pubkeyname".
(build_list): Add letter==1 hack.
* g10/misc.c (print_pubkey_algo_note): Use enum typedef for the arg.
(print_cipher_algo_note): Ditto.
(print_digest_algo_note): Ditto.
(map_md_openpgp_to_gcry): New.
(openpgp_md_test_algo): Rewrite.
(openpgp_md_algo_name): Rewrite to do without Libgcrypt.
* g10/cpr.c (write_status_begin_signing): Remove hardwired list of
algo ranges.
* g10/misc.c (map_cipher_openpgp_to_gcry): Use explicit mapping and
use enums for the arg and return value.
(map_cipher_gcry_to_openpgp): Ditto.
(openpgp_cipher_blocklen): Use constant macros.
(openpgp_cipher_test_algo): Use mapping function and prepare to
disable algorithms.
(openpgp_cipher_algo_name): Do not use Libgcrypt.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Replace
CGRY_CIPHER_* by CIPHER_ALGO_*.
* common/openpgpdefs.h (cipher_algo_t): Remove unused
CIPHER_ALGO_DUMMY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (get_pk_algo_from_canon_sexp): Change to return a
string.
* g10/keygen.c (check_keygrip): Adjust for change.
* sm/certreqgen-ui.c (check_keygrip): Likewise.
* agent/pksign.c (do_encode_dsa): Remove bogus map_pk_openpgp_to_gcry.
* g10/misc.c (map_pk_openpgp_to_gcry): Remove.
(openpgp_pk_test_algo): Change to a wrapper for openpgp_pk_test_algo2.
(openpgp_pk_test_algo2): Rewrite.
(openpgp_pk_algo_usage, pubkey_nbits): Add support for EdDSA.
(openpgp_pk_algo_name): Rewrite to remove need for gcry calls.
(pubkey_get_npkey, pubkey_get_nskey): Ditto.
(pubkey_get_nsig, pubkey_get_nenc): Ditto.
* g10/keygen.c(do_create_from_keygrip): Support EdDSA.
(common_gen, gen_ecc, ask_keysize, generate_keypair): Ditto.
* g10/build-packet.c (do_key): Ditto.
* g10/export.c (transfer_format_to_openpgp): Ditto.
* g10/getkey.c (cache_public_key): Ditto.
* g10/import.c (transfer_secret_keys): Ditto.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Ditto.
* g10/mainproc.c (proc_pubkey_enc): Ditto.
* g10/parse-packet.c (parse_key): Ditto,
* g10/sign.c (hash_for, sign_file, make_keysig_packet): Ditto.
* g10/keyserver.c (print_keyrec): Use openpgp_pk_algo_name.
* g10/pkglue.c (pk_verify, pk_encrypt, pk_check_secret_key): Use only
OpenPGP algo ids and support EdDSA.
* g10/pubkey-enc.c (get_it): Use only OpenPGP algo ids.
* g10/seskey.c (encode_md_value): Ditto.
--
This patch separates Libgcrypt and OpenPGP public key algorithms ids
and in most cases completely removes the Libgcrypt ones. This is
useful because for Libgcrypt we specify the algorithm in the
S-expressions and the public key ids are not anymore needed.
This patch also adds some support for PUBKEY_ALGO_EDDSA which will
eventually be used instead of merging EdDSA with ECDSA. As of now an
experimental algorithm id is used but the plan is to write an I-D so
that we can get a new id from the IETF. Note that EdDSA (Ed25519)
does not yet work and that more changes are required.
The ECC support is still broken right now. Needs to be fixed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/cpr.c (write_status_strings): New.
(write_status_text): Replace code by a call to write_status_strings.
* g10/mainproc.c (proc_encrypted): Remove show_session_key code.
* g10/decrypt-data.c (decrypt_data): Add new show_session_key code.
--
This feature can be used to return the session key for just a part of
a file. For example to downloading just the first 32k of a huge file,
decrypting that incomplete part and while ignoring all the errors
break out the session key. The session key may then be used on the
server to decrypt the entire file without the need to have the private
key on the server.
GnuPG-bug-id: 1389
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/options.h (opt): Rename field no_version to emit_version.
* g10/gpg.c (main): Init opt.emit_vesion to 1. Change --emit-version
to bump up opt.emit_version.
* g10/armor.c (armor_filter): Implement different --emit-version
values.
--
GnuPG-bug-id: 1572
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
* kbx/keybox-update.c (keybox_update_keyblock): Implement.
* kbx/keybox-search.c (get_blob_flags): Move to ...
* kbx/keybox-defs.h (blob_get_type): here.
* kbx/keybox-file.c (_keybox_read_blob2): Fix calling without R_BLOB.
* g10/keydb.c (build_keyblock_image): Allow calling without
R_SIGSTATUS.
(keydb_update_keyblock): Implement for keybox.
* kbx/keybox-dump.c (_keybox_dump_blob): Fix printing of the unhashed
size. Print "does not expire" also on 64 bit platforms.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (key_parms_from_sexp): Add algo name "ecc".
(agent_is_dsa_key): Ditto.
(agent_is_eddsa_key): New. Not finished, though.
* agent/pksign.c (do_encode_eddsa): New.
(agent_pksign_do): Use gcry_log_debug functions.
* agent/protect.c (agent_protect): Parse a flags parameter.
* g10/keygen.c (gpg_curve_to_oid): Move to ...
* common/openpgp-oid.c (openpgp_curve_to_oid): here and rename.
(oid_ed25519): New.
(openpgp_oid_is_ed25519): New.
(openpgp_oid_to_curve): New.
* common/t-openpgp-oid.c (test_openpgp_oid_is_ed25519): New.
* g10/build-packet.c (gpg_mpi_write): Write the length header also for
opaque MPIs.
(gpg_mpi_write_nohdr): New.
(do_key): Use gpg_mpi_write_nohdr depending on algorithm.
(do_pubkey_enc): Ditto.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Use
gpg_mpi_write_nohdr.
* g10/export.c (transfer_format_to_openpgp):
* g10/keygen.c (ecckey_from_sexp): Return the error.
(gen_ecc): Repalce arg NBITS by CURVE.
(read_parameter_file): Add keywords "Key-Curve" and "Subkey-Curve".
(ask_curve): New.
(generate_keypair, generate_subkeypair): Use ask_curve.
(do_generate_keypair): Also pass curve name.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Print
curve name.
* g10/parse-packet.c (mpi_read): Remove workaround for
Libcgrypt < 1.5.
(parse_key): Fix ECC case. Print the curve name.
* g10/pkglue.c (mpi_from_sexp): Rename to get_mpi_from_sexp.
(pk_verify, pk_check_secret_key): Add special case for Ed25519.
* g10/seskey.c (encode_md_value): Ditto.
* g10/sign.c (do_sign, hash_for, sign_file): Ditto.
--
Be warned that this code is subject to further changes and that the
format will very likely change before a release. There are also known
bugs and missing code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/iobuf.c (MAX_NESTING_FILTER): New.
(iobuf_push_filter2): Limit the nesting level.
* g10/mainproc.c (mainproc_context): New field ANY. Change HAVE_DATA
and ANY_SIG_SIGN to bit fields of ANY. Add bit field
UNCOMPRESS_FAILED.
(proc_compressed): Avoid printing multiple Bad Data messages.
(check_nesting): Return GPG_ERR_BAD_DATA instead of UNEXPECTED_DATA.
--
This is a more general fix for the nested compression packet bug. In
particular this helps g10/import.c:read_block to stop pushing
compression filters onto an iobuf stream. This patch also reduces the
number of error messages for the non-import case.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 35e40e2d514223c950c2f6d1214e02e92d87e997)
Resolved conflicts:
common/iobuf.c
g10/mainproc.c
* scd/app-common.h (APP_DECIPHER_INFO_NOPAD): New.
* scd/app-openpgp.c (do_decipher): Add arg R_INFO.
* scd/app-nks.c (do_decipher): Add arg R_INFO as a dummy.
* scd/app.c (app_decipher): Add arg R_INFO.
* scd/command.c (cmd_pkdecrypt): Print status line "PADDING".
* agent/call-scd.c (padding_info_cb): New.
(agent_card_pkdecrypt): Add arg R_PADDING.
* agent/divert-scd.c (divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Ditto.
* agent/command.c (cmd_pkdecrypt): Print status line "PADDING".
* g10/call-agent.c (padding_info_cb): New.
(agent_pkdecrypt): Add arg R_PADDING.
* g10/pubkey-enc.c (get_it): Use padding info.
--
Decryption using a card never worked in gpg 2.1 because the
information whether the pkcs#1 padding needs to be removed was not
available. Gpg < 2.1 too this info from the secret sub key but that
has gone in 2.1.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_import_key): Add option --unattended.
* agent/cvt-openpgp.c (convert_transfer_key): New.
(do_unprotect): Factor some code out to ...
(prepare_unprotect): new function.
(convert_from_openpgp): Factor all code out to ...
(convert_from_openpgp_main): this. Add arg 'passphrase'. Implement
openpgp-native protection modes.
(convert_from_openpgp_native): New.
* agent/t-protect.c (convert_from_openpgp_native): New dummy fucntion
* agent/protect-tool.c (convert_from_openpgp_native): Ditto.
* agent/protect.c (agent_unprotect): Add arg CTRL. Adjust all
callers. Support openpgp-native protection.
* g10/call-agent.c (agent_import_key): Add arg 'unattended'.
* g10/import.c (transfer_secret_keys): Use unattended in batch mode.
--
With the gpg-agent taking care of the secret keys, the user needs to
migrate existing keys from secring.gpg to the agent. This and also
the standard import of secret keys required the user to unprotect the
secret keys first, so that gpg-agent was able to re-protected them
using its own scheme. With many secret keys this is quite some
usability hurdle. In particular if a passphrase is not instantly
available.
To make this migration smoother, this patch implements an unattended
key import/migration which delays the conversion to the gpg-agent
format until the key is actually used. For example:
gpg2 --batch --import mysecretkey.gpg
works without any user interaction due to the use of --batch. Now if
a key is used (e.g. "gpg2 -su USERID_FROM_MYSECRETKEY foo"), gpg-agent
has to ask for the passphrase anyway, converts the key from the
openpgp format to the internal format, signs, re-encrypts the key and
tries to store it in the gpg-agent format to the disk. The next time,
the internal format of the key is used.
This patch has only been tested with the old demo keys, more tests
with other protection formats and no protection are needed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (build_list): Rewrite to cope with buffer overflow in
certain locales.
--
This fixes an obvious bug in locales where the translated string is
longer than the original. The bug could be exhibited by using
LANG=ru_RU.utf8 gpg -v --version.
En passant we also removed the trailing white space on continued
lines.
Reported-by: Dmitry V. Levin" <ldv at altlinux.org>
(cherry picked from commit 3402a84720e7d8c6ad04fc50eacb338a8ca05ca1)
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (mem_cleanup_item_t): New.
(run_mem_cleanup): New.
(_init_common_subsystems): Add an atexit for it.
(register_mem_cleanup_func): New.
* g10/kbnode.c (cleanup_registered): New.
(release_unused_nodes): New.
(alloc_node): Call register_mem_cleanup_func.
--
It is often time consuming to figure out whether still allocated
memory at process termination is fine (e.g. a cache) or a problem. To
help for that register_mem_cleanup_func may now be used to cleanup
such memory. The run time of the program will be longer; if that
turns out to be a problem we can change the code to only run in
debugging mode.
* include/cipher.h (PUBKEY_USAGE_NONE): New.
* g10/getkey.c (parse_key_usage): Set new flag.
--
We do not want to use the default capabilities (derived from the
algorithm) if any key flags are given in a signature. Thus if key
flags are used in any way, the default key capabilities are never
used.
This allows to create a key with key flags set to all zero so it can't
be used. This better reflects common sense.
* g10/keygen.c (append_to_parameter): New.
(proc_parameter_file): Use new func to extend the parameter list.
* g10/passphrase.c (passphrase_to_dek_ext): Print a diagnostic of
gcry_kdf_derive failed.
* g10/keygen.c (proc_parameter_file): Print a diagnostic if
passphrase_to_dek failed.
--
Due to an improper way of using the linked list head, all memory for
items allocated in proc_parameter_file was never released. If batched
key generation with a passphrase and more than ~200 keys was used this
exhausted the secure memory.
* g10/keygen.c (append_to_parameter): New.
(proc_parameter_file): Use new func to extend the parameter list.
* g10/passphrase.c (passphrase_to_dek_ext): Print a diagnostic of
gcry_kdf_derive failed.
* g10/keygen.c (proc_parameter_file): Print a diagnostic if
passphrase_to_dek failed.
--
Due to an improper way of using the linked list head, all memory for
items allocated in proc_parameter_file was never released. If batched
key generation with a passphrase and more than ~200 keys was used this
exhausted the secure memory.
* g10/gpg.c: Include shareddefs.h.
(main): Add option --pinentry-mode.
* g10/options.h (struct opt): Add field pinentry_mode.
* g10/passphrase.c: Include shareddefs.h.
(have_static_passphrase): Take care of loopback pinentry_mode.
(read_passphrase_from_fd): Ditto.
(get_static_passphrase): New.
(passphrase_to_dek_ext): Factor some code out to ...
(emit_status_need_passphrase): new.
* g10/call-agent.c (start_agent): Send the pinentry mode.
(default_inq_cb): Take care of the PASSPHRASE inquiry. Return a
proper error code.
(agent_pksign): Add args keyid, mainkeyid and pubkey_algo.
(agent_pkdecrypt): Ditto.
* g10/pubkey-enc.c (get_it): Pass new args.
* g10/sign.c (do_sign): Pass new args.
* g10/call-agent.c (struct default_inq_parm_s): New. Change all
similar structs to reference this one. Change all users and inquire
callback to use this struct, instead of NULL or some undefined but not
used structs. This change will help to eventually get rid of global
variables.
--
This new features allows to use gpg without a Pinentry. As a
prerequisite the agent must be configured to allow the loopback
pinentry mode (option --allow-loopback-pinentry). For example
gpg2 --pinentry-mode=loopback FILE.gpg
may be used to decrypt FILE.gpg while entering the passphrase on the
tty. If batch is used, --passphrase et al. may be used, if
--command-fd is used, the passphrase may be provided by another
process. Note that there are no try-again prompts in case of a bad
passphrase.
* common/iobuf.c (iobuf_seek): Fix for temp streams.
* g10/pubkey-enc.c (get_session_key, get_it): Add some log_clock calls.
* g10/keydb.c (dump_search_desc): New.
(enum_keyblock_states, struct keyblock_cache): New.
(keyblock_cache_clear): New.
(keydb_get_keyblock, keydb_search): Implement a keyblock cache.
(keydb_update_keyblock, keydb_insert_keyblock, keydb_delete_keyblock)
(keydb_rebuild_caches, keydb_search_reset): Clear the cache.
--
Gpg uses the key database at several places without a central
coordination. This leads to several scans of the keybox for the same
key. To improve that we now use a simple cache to store a retrieved
keyblock in certain cases. In theory this caching could also be done
for old keyrings, but it is a bit more work and questionable whether
it is needed; the keybox scheme is anyway much faster than keyrings.
Using a keybox with 20000 384 bit ECDSA/ECHD keypairs and a 252 byte
sample text we get these values for encrypt and decrypt operations on
an Core i5 4*3.33Ghz system. The option --trust-model=always is used.
Times are given in milliseconds wall time.
| | enc | dec | dec,q |
|-----------+-----+-----+-------|
| key 1 | 48 | 96 | 70 |
| key 10000 | 60 | 98 | 80 |
| key 20000 | 69 | 106 | 88 |
| 10 keys | 540 | 290 | 70 |
The 10 keys test uses a mix of keys, the first one is used for
decryption but all keys are looked up so that information about are
printed. The last column gives decryption results w/o information
printing (--quiet).
The keybox is always scanned sequentially without using any index. By
adding an index to the keybox it will be possible to further reduce
the time required for keys stored to the end of the file.
* g10/keydb.c (parse_keyblock_image): Add args PK_NO and UID_NO and
set the note flags accordingly.
(keydb_get_keyblock): Transfer PK_NO and UID_NO to parse_keyblock_image.
* kbx/keybox-search.c (blob_cmp_fpr, blob_cmp_fpr_part)
(blob_cmp_name, blob_cmp_mail): Return the key/user number.
(keybox_search): Set the key and user number into the found struct.
(keybox_get_keyblock): Add args R_PK_NO and R_UID_NO and set them from
the found struct.
--
getkey.c needs to know whether the correct subkey was found. Thus we
need to set the node flags the same way we did it with the keyring
storage.
* common/logging.c (log_clock): New.
* g10/gpg.c (set_debug): Print clock debug flag.
* g10/options.h (DBG_CLOCK_VALUE, DBG_CLOCK): New.
--
To actually use log_clock you need to enable the code in
logginc.c:log_check() and link against librt. --debug 4096 may then
be used to enable it at runtime.
* g10/getkey.c (cache_public_key): Make room in the cache if needed.
--
To create the selfsigs, the key generation code makes use of the key
cache. However, after 4096 the cache is filled up and then disabled.
Thus generating more than 4096 keys in one run was not possible. We
now clear the first half the inserted keys every time the cache gets
full.
* g10/keydb.c (parse_keyblock_image): Add arg SIGSTATUS.
(keydb_get_keyblock): Handle it.
(build_keyblock_image): Add arg SIGSTATUS.
(keydb_insert_keyblock): Handle it.
* kbx/keybox-blob.c (pgp_create_sig_part): Add arg SIGSTATUS.
(_keybox_create_openpgp_blob): Ditto.
* kbx/kbxutil.c (import_openpgp): Adjust for above change.
* kbx/keybox.h (KEYBOX_FLAG_SIG_INFO): New.
* kbx/keybox-search.c (_keybox_get_flag_location): Handle new flag.
(keybox_get_keyblock): Add arg R_SIGSTATUS.
* kbx/keybox-update.c (keybox_insert_keyblock): Add arg SIGSTATUS.
--
With this change a key listing using the keybox format is now double
as fast as using a keyring. The memory use dropped as well. Measured
with about 1500 keys.
* g10/getkey.c (get_pubkey_fast): Improve the assertion.
* kbx/keybox.h: Include iobuf.h.
* kbx/keybox-blob.c (keyboxblob_uid): Add field OFF.
(KEYBOX_WITH_OPENPGP): Remove use of this macro.
(pgp_create_key_part_single): New.
(pgp_temp_store_kid): Change to use the keybox-openpgp parser.
(pgp_create_key_part): Ditto.
(pgp_create_uid_part): Ditto.
(pgp_create_sig_part): Ditto.
(pgp_create_blob_keyblock): Ditto.
(_keybox_create_openpgp_blob): Ditto.
* kbx/keybox-search.c (keybox_get_keyblock): New.
* kbx/keybox-update.c (keybox_insert_keyblock): New.
* g10/keydb.c (parse_keyblock_image):
(keydb_get_keyblock): Support keybox.
(build_keyblock_image): New.
(keydb_insert_keyblock): Support keybox.
* kbx/kbxutil.c (import_openpgp, main): Add option --dry-run and print
a kbx file to stdout.
* kbx/keybox-file.c (_keybox_read_blob2): Allow keyblocks up to 10^6
bytes.
--
Import and key listing does now work with the keybox format. It is
still quite slow and signature caching is completely missing.
Increasing the maximum allowed length for a keyblock was required due
to a 700k keyblock which inhibited kbxutil to list the file.
kbxutil's option name --import-openpgp is not quite appropriate
because it only creates KBX blobs from OpenPGP data.
* kbx/keybox-defs.h (_keybox_write_header_blob): Move prototype to ..
* kbx/keybox.h: here.
* kbx/keybox-init.c (keybox_lock): Add dummy function
* g10/keydb.c: Include keybox.h.
(KeydbResourceType): Add KEYDB_RESOURCE_TYPE_KEYBOX.
(struct resource_item): Add field kb.
(maybe_create_keyring_or_box): Add error descriptions to diagnostics.
Add arg IS_BOX. Write a header for a new keybox file.
(keydb_add_resource): No more need for the force flag. Rename the
local variable "force" to "create". Add URL scheme "gnupg-kbx". Add
magic test to detect a keybox file. Add basic support for keybox.
(keydb_new, keydb_get_resource_name, keydb_delete_keyblock)
(keydb_locate_writable, keydb_search_reset, keydb_search2): Add
support for keybox.
(lock_all, unlock_all): Ditto.
* g10/Makefile.am (needed_libs): Add libkeybox.a.
(gpg2_LDADD, gpgv2_LDADD): Add KSBA_LIBS as a workaround.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_PRIMARY)
KEYDB_RESOURCE_FLAG_DEFAULT, KEYDB_RESOURCE_FLAG_READONLY): New.
* g10/gpg.c, g10/gpgv.c (main): Use new constants.
--
I did most of these changes back in 2011 and only cleaned them up
now. More to follow soon.
* g10/import.c (valid_keyblock_packet): New.
(read_block): Store only valid packets.
--
A corrupted key, which for example included a mangled public key
encrypted packet, used to corrupt the keyring. This change skips all
packets which are not allowed in a keyblock.
GnuPG-bug-id: 1455
(cherry-picked from commit f795a0d59e197455f8723c300eebf59e09853efa)
* keyserver.c (print_keyrec): Honor --keyid-format when getting back
full fingerprints from the keyserver (the comment in the code was
correct, the code was not).
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
* g10/keygen.c (keygen_set_std_prefs): Include IDEA only in PGP2
compatibility mode.
* g10/misc.c (idea_cipher_warn): Remove. Also remove all callers.
* common/status.h (STATUS_RSA_OR_IDEA): Remove. Do not emit this
status anymore.
--
To keep the number of actually used algorithms low, we want to support
IDEA only in a basically read-only way (unless --pgp2 is used during
key generation). It does not make sense to suggest the use of this
old 64 bit blocksize algorithm. However, there is old data available
where it might be helpful to have IDEA available.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* g10/sign.c (update_keysig_packet): Honor --cert-digest-algo when
recreating a cert.
This is used by various things in --edit-key like setpref, primary,
etc. Suggested by Christian Aistleitner.
* g10/gpgv.c, g10/trustdb.c (read_trust_options): Add min_cert_level
* g10/trustdb.c (check_trustdb_stale): Request a rebuild if
pending_check_trustdb is true (set when we detect a trustdb
parameter has changed).
* g10/keylist.c (public_key_list): Use 'l' in the "tru" with-colons
listing for min_cert_level not matching.
* g10/tdbio.c (tdbio_update_version_record, create_version_record,
tdbio_db_matches_options, tdbio_dump_record, tdbio_read_record,
tdbio_write_record): Add a byte for min_cert_level in the tdbio
version record.
* g10/misc.c (pubkey_get_npkey, pubkey_get_nskey)
(pubkey_get_nsig, pubkey_get_nenc): Map all RSA algo ids to
GCRY_PK_RSA.
--
The problem is that Libgcrypt has no more support for the alternate
RSA ids and thus if asking for the number of parameters, they will
return zero. Now, this leads to packing the key parameters into an
opaque MPI but because the algorithm id is actually known to GPG, it
assumes valid RSA parameters.
An example key with RSA_S is 0x5434509D.
* scripts/gitlog-to-changelog: New script. Taken from gnulib.
* scripts/git-log-fix: New file.
* scripts/git-log-footer: New file.
* doc/HACKING: Describe the ChangeLog policy
* ChangeLog: New file.
* Makefile.am (EXTRA_DIST): Add new files.
(gen-ChangeLog): New.
(dist-hook): Run gen-ChangeLog.
Rename all ChangeLog files to ChangeLog-2011.
* common/dns-cert.c: Remove iobuf.h.
(get_dns_cert): Rename to _get_dns_cert. Remove MAX_SIZE arg. Change
iobuf arg to a estream-t. Rewrite function to make use of estream
instead of iobuf. Require all parameters. Return an gpg_error_t
error instead of the type. Add arg ERRSOURCE.
* common/dns-cert.h (get_dns_cert): New macro to pass the error source
to _gpg_dns_cert.
* common/t-dns-cert.c (main): Adjust for changes in get_dns_cert.
* g10/keyserver.c (keyserver_import_cert): Ditto.
* doc/gpg.texi (GPG Configuration Options): Remove max-cert-size.
This works by specifying the keygrip instead of an algorithm (section
number 13) and requires that the option -expert has been used. It
will be easy to extend this to the primary key.
Without this patch, pk2 would be freed twice.
>From 2a18a4b757e0896e738fefbbaa8ff8c23a9edf89 Mon Sep 17 00:00:00 2001
From: Jim Meyering <meyering@redhat.com>
Date: Tue, 20 Sep 2011 16:20:39 +0200
Subject: [PATCH] avoid use of freed pointer
If we free pk2 at the top of the for-loop, set it to NULL
so that we don't free it again just before returning.
* revoke.c (gen_desig_revoke): Don't use pk2 after freeing it.
This patch implementes a chunk mode to pass the key parameters from
scdaemon to gpg. This allows to pass arbitrary long key paremeters;
it is used for keys larger than 3072 bit.
Note: the card key generation in gpg is currently broken. The keys
are generated but it is not possible to create the self-signature
because at that time the gpg-agent does not yet know about the new
keys and thus can't divert the sign request to the card. We either
need to run the learn command right after calling agent_scd_genkey or
implement a way to sign using the currently inserted card. Another
option would be to get rid of agent_scd_genkey and implement the
feature directly in agent_genkey.
Returning -1 as an error code is not very clean given that gpg error
has more descriptive error codes. Thus we now return
GPG_ERR_NOT_FOUND for all search operations and adjusted all callers.
The protection used in the exported key used a different iteration
count than given in the S2K field. Thus all OpenPGP keys exported
from GnuPG 2.1-beta can't be imported again. Given that the actual
secret key material is kept in private-keys-v1.d/ the can be
re-exported with this fixed version.
Since 2009-12-08 gpg was not able to find email addresses indicated
by a leading '<'. This happened when I merged the user id
classification code of gpgsm and gpg.
This helps in the case of an unknown key algorithm with a corrupted
packet which claims a longer packet length. This used to allocate the
announced packet length and then tried to fill it up without detecting
an EOF, thus taking quite some time. IT is easy to fix, thus we do
it. However, there are many other ways to force gpg to use large
amount of resources; thus as before it is strongly suggested that the
sysadm uses ulimit do assign suitable resource limits to the gpg
process. Suggested by Timo Schulz.
Without Libgcrypt 1.5 is was not possible to use ECC keys. ECC is
major new feature and thus it does not make sense to allow building
with an older Libgcrypt without supporting ECC.
Also fixed a few missing prototypes.
This was a regression in 2.1 introduced due to having the agent do the
signing in contrast to the old "SCD PKSIGN" command which accesses the
scdaemon directly and passed the hash algorithm. The hash algorithm
is used by app-openpgp.c only for a sanity check.
The import test imports the keys as needed and because they are
passphrase protected we now need a pinentry script to convey the
passphrase to gpg-agent.
The basic network code from http.c is used for finger. This keeps the
network related code at one place and we are able to use the somewhat
matured code form http.c. Unfortunately I had to enhance the http
code for more robustness and probably introduced new bugs.
Test this code using
gpg --fetch-key finger:wk@g10code.com
(I might be the last user of finger ;-)
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
DECRYPTION_INFO <mdc_method> <sym_algo>
Print information about the symmetric encryption algorithm and
the MDC method. This will be emitted even if the decryption
fails.
Wrote the ChangeLog 2011-01-13 entry for Andrey's orginal work modulo
the cleanups I did in the last week. Adjusted my own ChangeLog
entries to be consistent with that entry.
Nuked quite some trailing spaces; again sorry for that, I will better
take care of not saving them in the future. "git diff -b" is useful
to read the actual changes ;-).
The ECC-INTEGRATION-2-1 branch can be closed now.
Import and export of secret keys does now work. Encryption has been
fixed to be compatible with the sample messages.
This version tests for new Libgcrypt function and thus needs to be
build with a new Libgcrypt installed.
Quite some changes were needed but in the end we have less code than
before. Instead of trying to do everything with MPIs and pass them
back and forth between Libgcrypt and GnuPG, we know use the
S-expression based interface and make heavy use of our opaque MPI
feature.
Encryption, decryption, signing and verification work with
self-generared keys.
Import and export does not yet work; thus it was not possible to check
the test keys at https://sites.google.com/site/brainhub/pgpecckeys .
Changed order of some conditional to make to put the special case into
the true branch. Indentation changes. Minor other changes to make the
ECC code more similar to the rest of our code.
It builds but many sefltests still fail. Need to fix that before
using it with an ECDH enabled libgcrypt.
[/]
2011-01-21 Werner Koch <wk@g10code.com>
* configure.ac: Need Libgcrypt 1.4.6 due to AESWRAP.
(HAVE_GCRY_PK_ECDH): Add new test.
[agent/]
2011-01-21 Werner Koch <wk@g10code.com>
* cvt-openpgp.c (GCRY_PK_ECDH) [!HAVE_GCRY_PK_ECDH]: New.
[include/]
2011-01-21 Werner Koch <wk@g10code.com>
* cipher.h (GCRY_PK_USAGE_CERT): Remove compatibility macros
because we now require libgcrypt 1.4.6.
(GCRY_PK_ECDH): Add replacement.
The following works:
gpg2 --gen-key (ECC)
gpg2 --list-keys
gpg2 --list-packets ~/.gnupg/pubring.gpg
gpg2 --list-packets <private key from http://sites.google.com/site/brainhub/pgpecckeys>
ECDH doesn't work yet as the code must be re-written to adjust for gpg-agent refactoring.
overflow when picking an algorithm (not a security issue since we
can't pick something not present in all preference lists, but we might
pick something that isn't scored first choice).
* pkclist.c (select_algo_from_prefs): Slightly improve the handling of
MD5 in preference lists. Instead of replacing MD5 with SHA-1, just
remove MD5 from the list altogether, and let the next-highest ranked
algorithm be chosen.
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (start_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
scd/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* command.c (scd_command_handler): Use assuan_fd_t and
assuan_fdopen on fds.
sm/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpgsm_server): Use assuan_fd_t and assuan_fdopen on
fds.
g10/
2009-11-25 Marcus Brinkmann <marcus@g10code.de>
* server.c (gpg_server): Use assuan_fd_t and assuan_fdopen on fds.
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
common/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* get-passphrase.c (default_inq_cb, membuf_data_cb): Change return
type to gpg_error_t.
g10/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
scd/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* command.c (reset_notify): Take LINE arg and return error.
(register_commands): Use assuan_handler_t type.
sm/
2009-11-02 Marcus Brinkmann <marcus@g10code.de>
* server.c (reset_notify, input_notify, output_notify): Update to
new assuan interface.
(register_commands): Use assuan_handler_t.
* call-agent.c (membuf_data_cb, default_inq_cb)
(inq_ciphertext_cb, scd_serialno_status_cb)
(scd_keypairinfo_status_cb, istrusted_status_cb)
(learn_status_cb, learn_cb, keyinfo_status_cb): Return gpg_error_t.
* configure.ac (NEED_LIBASSUAN_API, NEED_LIBASSUAN_VERSION):
Update to new API (2, 1.1.0).
agent/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-agent.c (parse_rereadable_options): Don't set global assuan
log file (there ain't one anymore).
(main): Update to new API.
(check_own_socket_pid_cb): Return gpg_error_t instead of int.
(check_own_socket_thread, check_for_running_agent): Create assuan
context before connecting to server.
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(write_and_clear_outbuf): Use gpg_error_t instead of
assuan_error_t.
(cmd_geteventcounter, cmd_istrusted, cmd_listtrusted)
(cmd_marktrusted, cmd_havekey, cmd_sigkey, cmd_setkeydesc)
(cmd_sethash, cmd_pksign, cmd_pkdecrypt, cmd_genkey, cmd_readkey)
(cmd_keyinfo, cmd_get_passphrase, cmd_clear_passphrase)
(cmd_get_confirmation, cmd_learn, cmd_passwd)
(cmd_preset_passphrase, cmd_scd, cmd_getval, cmd_putval)
(cmd_updatestartuptty, cmd_killagent, cmd_reloadagent)
(cmd_getinfo, option_handler): Return gpg_error_t instead of int.
(post_cmd_notify): Change type of ERR to gpg_error_t from int.
(io_monitor): Add hook argument. Use symbols for constants.
(register_commands): Change return type of HANDLER to gpg_error_t.
(start_command_handler): Allocate assuan context before starting
server.
* call-pinentry.c: Include "scdaemon.h" before <assuan.h> because
of GPG_ERR_SOURCE_DEFAULT check.
(unlock_pinentry): Call assuan_release instead of
assuan_disconnect.
(getinfo_pid_cb, getpin_cb): Return gpg_error_t instead of int.
(start_pinentry): Allocate assuan context before connecting to
server.
* call-scd.c (membuf_data_cb, learn_status_cb, get_serialno_cb)
(membuf_data_cb, inq_needpin, card_getattr_cb, pass_status_thru)
(pass_data_thru): Change return type to gpg_error_t.
(start_scd): Allocate assuan context before connecting to server.
common/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* asshelp.c (start_new_gpg_agent): Allocate assuan context before
starting server.
g10/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* call-agent.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(learn_status_cb, dummy_data_cb, get_serialno_cb, default_inq_cb)
(learn_status_cb, inq_writecert_parms, inq_writekey_parms)
(scd_genkey_cb, membuf_data_cb): Return gpg_error_t instead of
int.
* gpg.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(main): Update to new Assuan API.
* server.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, do_listkeys, cmd_listkeys)
(cmd_listsecretkeys, cmd_genkey, cmd_getinfo): Return gpg_error_t
instead of int.
(register_commands): Allocate assuan context before starting
server.
(gpg_server): Allocate assuan_context before starting server.
scd/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* command.c: Include "scdaemon.h" before <assuan.h> because of
GPG_ERR_SOURCE_DEFAULT check.
(option_handler, open_card, cmd_serialno, cmd_lean, cmd_readcert)
(cmd_readkey, cmd_setdata, cmd_pksign, cmd_pkauth, cmd_pkdecrypt)
(cmd_getattr, cmd_setattr, cmd_writecert, cmd_writekey)
(cmd_genkey, cmd_random, cmd_passwd, cmd_checkpin, cmd_lock)
(cmd_unlock, cmd_getinfo, cmd_restart, cmd_disconnect, cmd_apdu)
(cmd_killscd): Return gpg_error_t instead of int.
(scd_command_handler): Allocate assuan context before starting server.
* scdaemon.c (main): Update to new Assuan API.
sm/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpgsm.c (main): Update to new assuan API.
* server.c: Include "gpgsm.h" before <assuan.h> due to check for
GPG_ERR_SOURCE_DEFAULT and assuan.h now including gpg-error.h.
(option_handler, cmd_recipient, cmd_signer, cmd_encrypt)
(cmd_decrypt, cmd_verify, cmd_sign, cmd_import, cmd_export)
(cmd_delkeys, cmd_message, cmd_listkeys, cmd_dumpkeys)
(cmd_listsecretkeys, cmd_dumpsecretkeys, cmd_genkey)
(cmd_getauditlog, cmd_getinfo): Return gpg_error_t instead of int.
(register_commands): Same for member HANDLER in table.
(gpgsm_server): Allocate assuan context before starting server.
* sm/call-dirmngr.c:
* call-dirmngr.c (prepare_dirmngr): Check for CTX and error before
setting LDAPSERVER.
(start_dirmngr_ext): Allocate assuan context before starting
server.
(inq_certificate, isvalid_status_cb, lookup_cb, lookup_status_cb)
(run_command_cb, run_command_inq_cb, run_command_status_cb):
Return gpg_error_t instead of int.
tools/
2009-09-23 Marcus Brinkmann <marcus@g10code.de>
* gpg-connect-agent.c (getinfo_pid_cb, read_and_print_response)
(main): Update to new Assuan API.
* mainproc.c (proc_encrypted): Clear passphrase cached with S2K
cache ID if decryption failed.
* passphrase.c (passphrase_to_dek_ext): Set dek->s2k_cacheid.
* gpgv.c (passphrase_clear_cache): New stub.
* exec.c: Fix function name indentation.
(expand_args): Simplify by using membuf functions.
(exec_write): Fix memory leak on error.
(w32_system): Use DETACHED_PROCESS so
that a new console is not created.
* configure.ac: Remove Camellia restriction.
* gpg.c (main), misc.c (openpgp_cipher_test_algo): Remove Camellia
restriction.
* misc.c (map_cipher_openpgp_to_gcry), main.h: Add macros for
openpgp_cipher_open, openpgp_cipher_get_algo_keylen, and
openpgp_cipher_get_algo_blklen to wrap around the corresponding gcry_*
functions, but pass the algorithm number through
map_cipher_openpgp_to_gcry. This is needed in case the gcry algorithm
number doesn't match the OpenPGP number (c.f. Camellia).
* encr-data.c, pubkey-enc.c, mainproc.c, cipher.c, encode.c, seskey.c,
passphrase.c, seckey-cert.c: Use new openpgp_cipher_* macros here.
(list_keyblock_print), pkclist.c (do_edit_ownertrust), keyedit.c
(menu_showphoto), photoid.c (generate_photo_id, show_photos), misc.c
(pct_expando): Add %v and %V expandos so that displaying photo IDs can
show the attribute validity tag (%v) and string (%V). Originally by
Daniel Gillmor.
* gpg.c (enum cmd_and_opt_values): New option
oEnableW32HandleTranslation.
(opts): New option --enable-w32-handle-translation.
(main): New variable w32_handle_translation to keep track of
option.
* gpg.c (main): New variable default_configname. Use it if
save_configname is NULL (can happen if default configfile does
not exist). Move default configname determination to ...
(get_default_configname): ... this new function.
the literals count.
* verify.c (verify_one_file), decrypt.c (decrypt_messages): Call it
here so we allow multiple literals in --multifile mode (in different
files - not concatenated together).
* call-agent.c (start_agent): Don't use log_error when using the
fallback hack to start the agent. This is bug 782.
scripts/
* mail-to-translators: Copied from 1.4. and adjusted.
tools/
* gpgconf-comp.c: Allow changing of --allow-mark-trusted.
* gpg-connect-agent.c (main): New option --decode and commands
decode and undecode.
(read_and_print_response): Implement option.
* keyserver.c: Windows Vista doesn't grok X_OK and so fails access()
tests. Previous versions interpreted X_OK as F_OK anyway, so we'll
just use F_OK directly.
* parse-packet.c (parse_signature): It's hex.
* getkey.c (merge_selfsigs_subkey): Avoid listing the contents of a
backsig when list mode is on. Noted by Timo Schulz.
* keyedit.c (keyedit_menu): If we modify the keyblock (via
fix_keyblock() or collapse_uids()) make sure we reprocess the
keyblock so the flags are correct. Noted by Robin H. Johnson.
* getkey.c (fixup_uidnode): Properly clear flags that don't apply
to us (revoked, expired) so that we can reprocess a uid.
g10/
* passphrase.c (passphrase_get): Set the cancel flag on all error
from the agent. Fixes a bug reported by Tom Duerbusch.
sm/
* gpgsm.c (main): Let --gen-key print a more informative error
message.
doc/
* com-certs.pem: Added the current root certifcates of D-Trust and
S-Trust.
g10/
* status.c (write_status_begin_signing): New.
* sign.c (sign_file, sign_symencrypt_file): Call it.
* textfilter.c (copy_clearsig_text): Call it.
* call-agent.c (agent_scd_pksign): Pass --hash-rmd160 to SCD if
required.
* gpg.c (main): Let --no-use-agent and --gpg-agent-info print a
warning.
* misc.c (obsolete_option): New.
* Makefile.am (gpg2_LDADD, gpgv2_LDADD): Replace -lassuan and
-lgpg-error with $(LIBASSUAN_LIBS) and $(GPG_ERROR_LIBS).
(AM_CFLAGS): Add $(LIBASSUAN_CFLAGS) and $(GPG_ERROR_CFLAGS).
char * vs. unsigned char * warnings. The GNU coding standards used to
say that these mismatches are okay and better than a bunch of casts.
Obviously this has changed now.
* kbxutil.c (i18n_init): Always use LC_ALL.
* gpgsm.c (i18n_init): Always use LC_ALL.
* certdump.c (gpgsm_format_name): Factored code out to ..
(gpgsm_format_name2): .. new.
(gpgsm_print_name): Factored code out to ..
(gpgsm_print_name2): .. new.
(print_dn_part): New arg TRANSLATE. Changed all callers.
(print_dn_parts): Ditto.
(gpgsm_format_keydesc): Do not translate the SUBJECT; we require
it to stay UTF-8 but we still want to filter out bad control
characters.
* gpgconf.c (i18n_init): Always use LC_ALL.
file.
(card_edit): Pass ARG_STRING to change_login.
(card_status): Print CA fingerprints.
(change_cafpr): New.
(card_edit): New command CAFPR.
* call-agent.h: Add members for CA fingerprints.
* call-agent.c (agent_release_card_info): Invalid them.
(learn_status_cb): Store them.
Introduce PACKAGE_GT and set it to gnupg2.
* gpg-agent.c (main): Use new libgcrypt thread library register
scheme.
* Makevars (DOMAIN): Init from PACKAGE_GT
* g10.c: New options --gpgconf-list, --debug-level and --log-file
(set_debug): Add arg DEBUG_LEVEL.
(main): Look at less and less version specific config files. From
gnupg 1.3.
* keygen.c (do_generate_keypair): Don't try to execute certain pieces of code
in case an error occured.
(gen_card_key): Don't print out a message, which is already
printed by do_generate_keypair().
(print_isoname): Ditto.
* trustdb.c (check_regexp): s/exp/expr/.
* keyedit.c (trustsig_prompt): Removed a "> 255" term; it is
always false due to the data type.
* passphrase.c (agent_get_passphrase): Use xasprintf and avoid
non-literal format strings.
* tdbio.c (upd_hashtable, drop_from_hashtable, lookup_hashtable):
Fixed log_error format string bugs. Kudos to the now working
gcc-3.3 -Wformat-nonliteral and Florian Weimer's investigations in
gnupg 1.2.3.
structure, so that it can indeed be updated.
* card-util.c (fpr_is_zero): New.
(generate_card_keys): New.
(card_edit): New command "generate".
* keygen.c (generate_keypair): New arg CARD_SERIALNO, removed call
to check_smartcard.
(check_smartcard,show_smartcard): Removed.
(show_sha1_fpr,fpr_is_zero): Removed.
* app-openpgp.c (do_getattr): Support SERIALNO and AID.
(list_keyblock_print): Use it here.
* card-util.c (toggle_forcesig): New.
(card_edit): New command "forcesig".
* card-util.c (print_name, print_isoname): Use 0 and not LF fro
the max_n arg of tty_print_utf8_string2.
* call-agent.c (agent_scd_getattr): New.
(learn_status_cb): Release values before assignment so that it can
be used by getattr to update the structure.
* card-util.c (change_pin): Simplified. We now have only a PIN
and an Admin PIN.
* card-util.c (card_status): Use tty_fprintf for all output.
(print_sha1_fpr, print_isoname): Ditto.
(get_one_name,change_name, change_url, change_login,change_lang)
(change_sex): New; taken from keygen.c.
* keygen.c (smartcard_get_one_name, smartcard_change_name)
(smartcard_change_url, smartcard_change_login_data)
(smartcard_change_lang, smartcard_change_sex): Removed.
(check_smartcard): Removed most menu items.
* misc.c (openpgp_pk_algo_usage): Allow AUTH where SIGN is allowed.
* keygen.c (ask_passphrase): No need to allocated S2K in secure
memory.
* scdaemon.c (main): --pcsc-driver again defaults to pcsclite.
David Corcoran was so kind to remove the GPL incompatible
advertisng clause from pcsclite.
* apdu.c (apdu_open_reader): Actually make pcsc-driver option work.
* scdaemon.c, scdaemon.h: New option --pcsc-ccid.
* ccid-driver.c, ccid-driver.h: New but far from being useful.
* Makefile.am: Add above.
* apdu.c: Add support for that ccid driver.
* encode.c (encode_sesskey): Checked the code and removed
the warning since all compatibility checks with PGP succeeded.
* mainproc.c (symkey_decrypt_sesskey): Better check for the
algorithm and check the return values of some functions.
(gpgsm_exit): Update the random seed file and enable debug output.
* g10.c (main): Add secmem features and set the random seed file.
(g10_exit): Update the random seed file.
* parse-packet.c (parse_signature,read_protected_v3_mpi)
(parse_key): Fixed use of mpi_set_opaque.
* keygen.c (gen_card_key): Ditto.
* card-util.c (card_status): New.
* call-agent.c (learn_status_cb): Parse more information.
* keylist.c (print_pubkey_info): Add FP arg for optinal printing
to a stream. Changed all callers.
* seskey.c (encode_session_key): Debug output of the session key.
* pubkey-enc.c (get_it): Handle card case.
* call-agent.c (agent_scd_pkdecrypt): New.
* pkglue.c (pk_encrypt): Add RSA support.
* g10.c (main): Default to --use-agent.
* keygen.c (show_smartcard): Print info about the public key.
(check_smartcard): Check for existing key here.
(gen_card_key): And not anymore here.
(fpr_is_zero): New.
(generate_keypair): Generate both keys for a card.
(smartcard_change_url): Nw.
* keygen.c (gen_card_key): Obviously we should use the creation
date received from SCDAEMON, so that the fingerprints will match.
* sign.c (do_sign): Pass the serialno to the sign code.
* keyid.c (serialno_and_fpr_from_sk): New.
to libgcrypt functions, using shared error codes from libgpg-error,
replacing the old functions we used to have in ../util by those in
../jnlib and ../common, renaming the malloc functions and a couple of
types. Note, that not all changes are listed below becuause they are
too similar and done at far too many places. As of today the code
builds using the current libgcrypt from CVS but it is very unlikely
that it actually works.
show_prompt, keyserver_search_prompt, keyserver_spawn): Go to version 1 of
the keyserver protocol. This is a better design, similar to
--with-colons, that allows for keys with multiple user IDs rather than
using multiple keys. It also matches the machine readable pksd format.
Also use a prettier --search-keys listing format that can fill different
size windows (currently set at 24 lines).
* keylist.c (print_capabilities): Properly indicate per-key capabilities
of sign&encrypt primary keys that have secret-parts-missing (i.e. no
capabilities at all)
* mainproc.c (symkey_decrypt_sesskey): Fix compiler warning.
function as they may not have all their fields filled in.
* sig-check.c (signature_check2): Use new is_primary flag to check rather
than comparing main_keyid with keyid as this still works in the case of a
not fully filled in pk.
that fact in the capabilities, and only primary signing keys can certify
other keys.
* packet.h, parse_packet.c (parse_key): Add is_primary flag for public
keys (it already exists for secret keys).
cipher when importing a secret key.
* keylist.c (list_keyblock_print): Show a '#' for a secret-parts-missing
key.
* parse_packet.c (parse_key): Some comments.
* revoke.c (gen_revoke): Remove some debugging code.
* trustdb.c (verify_own_keys): Make trusted-key a non-deprecated option
again.
* seckey-cert.c (do_check): Don't give the IDEA warning unless the cipher
in question is in fact IDEA.
* keyedit.c (menu_addrevoker): The direct key signature for revocation
keys must be at least v4 to carry the revocation key subpacket. Add a PGP
2.x warning for revocation keys.
* g10.c (check_permissions): Rearrange strings to make translating easier
(don't incorporate string parts).
* keyedit.c (sign_uids): Make strings translatable.
* sig-check.c (check_key_signature2): Make string translatable.
2002-09-13 David Shaw <dshaw@jabberwocky.com>
* getkey.c (check_revocation_keys): Move....
* main.h, sig-check.c (check_revocation_keys): to here. Also
return the signature_check error code rather than 0/1 and cache
the sig result.
* sig-check.c (check_key_signature2): Divert to
check_revocation_keys if a revocation sig is made by someone other
than the pk owner.
* getkey.c (merge_selfsigs_main): Tidy.
2002-09-13 Werner Koch <wk@gnupg.org>
* g10.c (main) [__MINGW32__]: Activate oLoadExtension.
* misc.c (checksum_u16_nobug): Removed.
(checksum_u16): Removed the bug emulation.
(checksum_mpi): Ditto.
(checksum_mpi_counted_nbits): Removed and replaced all calls
with checksum_mpi.
* parse-packet.c (read_protected_v3_mpi): New.
(parse_key): Use it here to store it as an opaque MPI.
* seckey-cert.c (do_check): Changed the v3 unprotection to the new
why to store these keys.
(protect_secret_key): Likewise.
* build-packet.c (do_secret_key): And changed the writing.
printing the list of keys a message was encrypted to. This would make gpg
give a non-zero exit code even for completely valid messages if the
message was encrypted to more than one key that the user owned.
used one in verbosity level 3.
* gpgv.c (main): Try to set a default character set.
* status.c, status.h (STATUS_IMPORT_OK): New.
* import.c (import_one,import_secret_one): Print new status.
* options.skel: The PGP LDAP keyserver is back. Use MIT keyserver as a
sample rather than cryptnet as cryptnet does not support searching yet.
* keyedit.c (show_key_with_all_names): Fix error message (preferences are
userid/selfsig and not key specific).
* encode.c (encode_simple,encode_crypt): Use new style CTB for
compressssed packets when using MDC. We need to do this so that
concatenated messages are properly decrypted. Old style
compression assumes that it is the last packet; given that we
can't determine the length in advance, the uncompressor does not
know where to start. Actually we should use the new CTB always
but this would break PGP 2 compatibility.
* parse-packet.c (parse): Special treatment for new style CTB
compressed packets.
* build-packet.c (do_mdc): Removed. Was not used.
(do_encrypted_mdc): Count the version number and the MDC packet.
"dehtmlize" function. Remove HTML before trying to parse each line from
the keyserver. If the keyserver provides key type information in the
listing, use it.
even for cached sigs. This also serves to protect against missing a sig
expiring while cached.
* getkey.c (merge_selfsigs_main): Don't check UID self-sigs twice.
chk_self_sigs. This improves efficiency as the same signatures are not
checked multiple times. Clarify when a subkey is revoked (any revocation
signature, even if it is dated before the binding signature).
* getkey.c (merge_selfsigs_subkey): Subkey revocation comments.
* keylist.c (list_one): Stats are only for public key listings.
* g10.c (main), options.skel: Default should be include-revoked for
keyserver operations.
* export.c (do_export_stream): Fix noop bug in exporting sensitive
revocation keys.
* pkclist.c (do_edit_ownertrust): Comment out the option for showing trust
paths until it can be implemented.
(get_user_id_printable): this. Filter out all dangerous
characters. Checked all usages.
(get_user_id_string_native): Renamed to..
(get_user_id_string_printable): this. Filter out all dangerous
characters. Checked all usages.
* keyedit.c (show_basic_key_info): New.
* keylist.c (print_fingerprint): New mode 3.
* import.c (import_one): Use new function to display the user ID.
* g10.c (main): enable opt.interactive.
* import.c (import_one): Ask the user if the key shall be
imported when the interactive mode is used. Useful to extract
selected keys from a file.
symmetric compressed files.
* encode.c (encode_simple, encode_crypt): If we are not using a MDC,
compress even if a file is already compressed. This is to help against
the chosen ciphertext attack.
* pkclist.c (select_algo_from_prefs): Fix requested algorithm bug so the
request succeeds even if the requested algorithm is not the first found.
* cipher.c (write_header), encode.c (use_mdc, encode_simple, encode_crypt,
encrypt_filter), g10.c (main): Be more eager to use a MDC. We use a MDC
if the keys directly support it, if the keys list AES (any) or TWOFISH
anywhere in the prefs, or if the cipher chosen does not have a 64 bit
blocksize.
section for random gatherers.
* keyring.c (create_tmp_file, rename_tmp_file): Create tmp files with
user-only permissions, but restore the original permissions if the user
has something special set.
* openfile.c (copy_options_file): Create new options file (gpg.conf) with
user-only permissions.
* keydb.c (keydb_add_resource): Create new keyrings with user-only
permissions.
for the hash that the sig is expecting. This can happen if a onepass sig
header does not match the actual sig, and also if the clearsign "Hash:"
header is missing or does not match the actual sig.
restarting gpg. This is Debian bug 124219, though their supplied patch
will not do the right thing.
* main.h, tdbio.c (tdbio_set_dbname), misc.c (removed check_permissions),
keydb.c (keydb_add_resource), g10.c (main, check_permissions): Significant
reworking of the permission check mechanism. The new behavior is to check
everything in the homedir by checking the homedir itself. If the user
wants to put (possibly shared) keyrings outside the homedir, they are not
checked. The options file and any extension files are checked wherever
they are, as well as their enclosing directories. This is Debian bug
147760.
clearsign_file): Use the same --pgpX warning string everywhere to ease
translations.
* encode.c (write_pubkey_enc_from_list): Warn when using --throw-keyid
with --pgpX. Noted by Vedaal Nistar.
decryption failed error if a MDC does not verify. Warn if a MDC is not
present (can disable via --no-mdc-warning).
* exec.c (exec_write), g10.c (main), keyserver.c (keyserver_spawn): Use
new DISABLE_KEYSERVER_PATH rather than FIXED_EXEC_PATH.
user can revoke sigs from particular uids only.
* keylist.c (list_keyblock_print): Don't display expired uids in
--list-keys unless -v and not --list-sigs (just like revoked uids).
delete_inv_parts), g10.c (main): New import-option
"repair-hkp-subkey-bug", which repairs as much as possible the HKP
mangling multiple subkeys bug. It is on by default for keyserver
receives, and off by default for regular --import.
* main.h, import.c (import, import_one, delete_inv_parts), hkp.c
(hkp_ask_import), keyserver.c (keyserver_spawn): Use keyserver import
options when doing keyserver receives.
keyserver.c (keyserver_spawn): If the user does not use "exec-path",
completely replace $PATH with GNUPG_LIBEXECDIR before calling the
keyserver helper. If the user does use "exec-path", append
GNUPG_LIBEXECDIR after the specified path.
delete_inv_parts), keyserver.c (parse_keyserver_options): add new
--import-options option. The only current flag is "allow-local-sigs".
* g10.c (main): Don't disable MDC in pgp7 mode.
* options.h, g10.c (main), keyserver.c (parse_keyserver_options): Remove
old keyserver-option include-attributes now that there is an export-option
for the same thing.
g10.c (main): add new --export-options option. Current flags are
"include-non-rfc", "include-local-sigs", "include-attributes", and
"include-sensitive-revkeys".
* options.h, hkp.c (hkp_export), keyserver.c (parse_keyserver_options,
keyserver_spawn): try passing unknown keyserver options to export options,
and if successful, use them when doing a keyserver --send-key.
* build-packet.c (build_sig_subpkt): We do not generate
SIGSUBPKT_PRIV_VERIFY_CACHE anymore.
sensitive revkeys along with the revocation sig itself.
* keyserver.c (parse_keyserver_options): Simpler implementation that can
skip one pass over the options.
as an argument to an addrevoker command. This sets the 0x40 sensitive
revoker flag.
* revoke.c (gen_desig_revoke): When generating a designated revocation,
include the direct key sig that contains the designated revoker subpacket.
This allows sensitive designated revocation subpackets to be exported.
Also indicate which revokers are sensitive in the first place.
designated revoker means "sensitive", not "local". It's exportable under
the right circumstances.
* main.h, options.h, export.c (do_export_stream), g10.c (main), hkp.c
(hkp_export), keyserver.c (keyserver_spawn: Add a flag to skip attribute
packets and their signatures while exporting. This is to accomodate
keyservers (pksd again) that choke on attributes. Use keyserver-option
"include-attributes" to control it. This defaults to ON (i.e. don't
skip).
keyserver_work), hkp.c (hkp_ask_import, hkp_export, hkp_search): Use a
much more strict reading of RFC-2396 for the keyserver URIs. Specifically,
don't try and be smart about checking the value of ":port" so long as it
is all digits, and properly handle opaque data (those scheme specific
parts that do not start with "//").
FIXED_PHOTO_VIEWER and DISABLE_PHOTO_VIEWER.
* mainproc.c (check_sig_and_print): Use --show-photos to show photos when
verifying a sig made by a key with a photo.
* keyserver.c (parse_keyserver_uri): Properly parse a URI with no :port
section and an empty file path, but with a terminating '/'.
(keyserver_work): Honor DISABLE_KEYSERVER_HELPERS.
* hkp.c (hkp_ask_import): Display keyserver URI as a URI, but only if
verbose.
* exec.c, g10.c: USE_EXEC_PATH -> FIXED_EXEC_PATH
use the original keyserver URI for cosmetics rather than trying to
recreate it when needed.
* mainproc.c (check_sig_and_print): Properly disregard expired uids.
Make sure that the first uid listed is a real uid and not an attribute
(attributes should only be listed in the "aka" section). When there are
no valid textual userids, try for an invalid textual userid before using
any attribute uid.
