* agent/gpg-agent.c (oCheckSymPassphrasePattern): New.
(opts): Add --check-sym-passphrase-pattern.
(parse_rereadable_options): Set option.
(main): Return option info.
* tools/gpgconf-comp.c: Add new option.
* agent/agent.h (opt): Add var check_sym_passphrase_pattern.
(struct pin_entry_info_s): Add var constraints_flags.
(CHECK_CONSTRAINTS_NOT_EMPTY): New to replace a hardwired 1.
(CHECK_CONSTRAINTS_NEW_SYMKEY): New.
* agent/genkey.c (check_passphrase_pattern): Rename to ...
(do_check_passphrase_pattern): this to make code reading
easier. Handle the --check-sym-passphrase-pattern option.
(check_passphrase_constraints): Replace arg no_empty by a generic
flags arg. Also handle --check-sym-passphrase-pattern here.
* agent/command.c (cmd_get_passphrase): In --newsymkey mode pass
CHECK_CONSTRAINTS_NEW_SYMKEY flag.
* agent/call-pinentry.c (struct entry_parm_s): Add constraints_flags.
(struct inq_cb_parm_s): New.
(inq_cb): Use new struct for parameter passing. Pass flags to teh
constraints checking.
(do_getpin): Pass constraints flag down.
(agent_askpin): Take constrainst flag from the supplied pinentry
struct.
--
Requirements for a passphrase to protect a private key and for a
passphrase used for symmetric encryption are different. Thus a
the use of a different pattern file will be useful. Note that a
pattern file can be used to replace the other passphrase constraints
options and thus we don't need to duplicate them for symmetric
encryption.
GnuPG-bug-id: 5517
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Change type of pinentry_formatted_passphrase
to int (as for other flags).
* agent/call-pinentry.c (setup_formatted_passphrase): Remove no longer
needed translated strings. Write option without value to Assuan
connection.
* agent/gpg-agent.c (opts): Use ARGPARSE_s_n for
oPinentryFormattedPassphrase.
(parse_rereadable_options): Set option to 1.
--
GnuPG-bug-id: 5553, 5517
* agent/call-pinentry.c (inq_cb): Handle checkpin inquiry.
(setup_enforced_constraints): New.
(agent_get_passphrase): Call setup_enforced_constraints if new
passphrase is requested.
--
This implements the gpg-agent side for checking whether a new passphrase
entered by the user in pinentry satisfies the passphrase constraints.
Performing a checkpin inquiry is only allowed if the passphrase
constraints are enforced. setup_enforced_constraints sends necessary
options and translated strings to pinentry.
GnuPG-bug-id: 5517, 5532
* agent/cvt-openpgp.c (do_unprotect): Only modify SKEY when it is
correctly decrypted.
--
GnuPG-bug-id: 5122
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_genkey): Use goto instead of return.
* agent/cvt-openpgp.c (convert_from_openpgp_main): Ditto.
* agent/genkey.c (agent_ask_new_passphrase): Fix typo to free correct
pointer
(agent_genkey): Release memory
* agent/gpg-agent.c (check_own_socket): Free sockname
* agent/protect-tool.c (read_key): Free buf.
(agent_askpin): Free passphrase
--
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Changed original patch to not add a free before a GPG_ERR_BUG.
Signed-off-by: Werner Koch <wk@gnupg.org>
GnuPG-bug-id: 5393
* agent/command.c (cmd_keyinfo): Factor some code out to ...
(get_keyinfo_on_cards): ... new.
(cmd_havekey): Add --list mode.
* g10/gpg.h (struct server_control_s): Add new caching vars.
* g10/gpg.c (gpg_deinit_default_ctrl): Release cache.
* g10/call-agent.c (agent_probe_any_secret_key): Init and try to use
the keygrip cache.
(agent_genkey): Clear the cache.
(agent_import_key): Ditto.
* g10/keylist.c (list_all, list_one): Pass ctrl to
agent_probe_any_secret_key.
* g10/getkey.c (lookup): Ditto.
--
With this change we first ask the agent for a list of all secret
keygrips and use that list instead of asking the agent for each public
key. Speeds up my "gpg -K" with a lot of secret and public keys by
more than 25%.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_request_identities): Remove double
check of ERR.
* g10/getkey.c (get_pubkey_byname): Remove double use of break.
* g10/pkglue.c (pk_encrypt): Handle possible NULL-ptr access due to
failed malloc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_readkey): Add option --no-data and special
handling for $SIGNKEYID and $AUTHKEYID.
* g10/call-agent.c (agent_scd_getattr): Create shadow keys for KEY-FPR
output.
* g10/skclist.c (enum_secret_keys): Automagically get a missing public
key for the current card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_request_identities): Skip unknown
curves.
--
For example when using my standard ed25519 token and testing cards
with only Brainpool support, the ssh-agent failed due to the unknown
curves seen on the card. This patches fixes this by ignoring keys
with unknown curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (agent_pksign_do): Support ECC and DSA verification
and print some debug info in the error case.
--
Note that the addition of do_encode_dsa has no immediate effect
because we use the code only for RSA. However, for debugging it can
be useful to change the code to check also other created signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_keytotpm): New.
(agent/command.c): Register new command KEYTOTPM.
* g10/call-agent.c (agent_keytotpm): New.
* g10/keyedit.c (cmdKEYTOTPM): New command "keytotpm".
(keyedit_menu): Implement.
--
The plumbing is done in two parts: the agent is modified to understand
a KEYTOTPM assuan command taking the key grip as an argument. This
simply obtains the key s expression and calls the existing writeky
diversion to the tpm2daemon. The daemon reponds with the TPM
conversion of the key and that key is then stored in the keyfile as a
shadowed-private-key with "tpm2-v1" type.
To effect the conversion, all the user does from gpg --edit-key is
select which private key they wish to move (or move the primary if no
key is selected) and type keytotpm. The conversion to TPM form is
instantaneous and once converted, the actual key cannot be recovered,
meaning that if you want your gpg key to move to a new laptop you must
keep an unconverted backup copy in a safe location.
When you do a list command, all TPM keys show up as
card-no: TPM-Protected
The key is stored encrypted to the TPM2 storage seed and since each
TPM has a unique seed, only the single TPM contained in your laptop
can now read the key. This means you cannot simply copy the shadowed
key file over to a new laptop, you must copy over the backup copy and
then convert it to TPM form on the new laptop.
To decomission your laptop, execute a tssclear command which
regenerates the storage seed and effectively shreds all keys. Note
when you have done this *every* TPM2 shadowed private key becomes
unreadable by any TPM and all are effectively destroyed.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Very minor cosmetic changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-tpm2d.c: New.
* divert-tpm2.c: New.
* agent/Makefile.am: Add new files.
* agent/agent.h (DAEMON_TPM2D): New. Add stub fucntions.
* agent/call-daemon.c (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* agent/command.c (do_one_keyinfo): Handle tpmv2.
* agent/gpg-agent.c (oTpm2daemonProgram): New.
(opts): New option --tpm2daemon-program.
(parse_rereadable_options): Handle option.
* agent/pkdecrypt.c (agent_pkdecrypt): Divert to tpm2d.
(agent_pksign_do): Ditto.
---
A new shadow key type: "tpm2-v1" is introduced signalling that the
shadowed key is handled by the tpm2daemon. A function to identify
this type is introduced and diversions to the tpm2daemon functions are
conditioned on this function for pkign and pkdecrypt where the same
diversions to scd are currently done. The (info) field of the
shadowed key stores the actual TPM key. The TPM key is encrypted so
only the physical TPM it was created on can read it (so no special
protection is required for the info filed), but if the (info) field
becomes corrupt or damaged, the key will be lost (unlike the token
case, where the key is actually moved inside the token).
Note, this commit adds handling for existing TPM format shadow keys,
but there is still no way to create them.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Additional changes:
* Add ChangeLog entries.
* Some minor indentation fixes.
* agent/Makefile.am (gpg_agent_SOURCES): Change to make distcheck
work.
* agent/agent.h [!HAVE_LIBTSS]: Do not return -EINVAL but an
gpg_error_t. Mark args as unused.
* agent/protect.c (agent_is_tpm2_key): Free BUF.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-daemon.c (struct wait_child_thread_parm_s) [W32]: Do not
use HANDLE for pid_t.
(wait_child_thread): Ditto.
--
Mingw has its own definition of pid_t as does libassuan. We should use
this instead of using HANDLE. Things are a bit complicated in
Windows, because Windows also has a pid_t but that is mostly useless;
in particular because you can't wait on a real pid but need a handle.
* common/session-env.c (session_env_list_stdenvnames): Extend to allow
return all names as one string.
* agent/command-ssh.c (SSH_REQUEST_EXTENSION): New.
(SSH_RESPONSE_EXTENSION_FAILURE): New.
(request_specs): Add handler for the extension command.
(ssh_handler_extension): New.
--
The extension mechanism is specified in
https://tools.ietf.org/html/draft-miller-ssh-agent-04
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Require at least Libgcrypt 1.9.0. Remove all
GCRYPT_VERSION_NUMBER dependent code.
--
Only Libgcrypt 1.9 implements EAX which is a mandatory algorithm in
RFC4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pkdecrypt.c (agent_pkdecrypt): Support decryption with card
but without a stub key.
--
GnuPG-bug-id: 5170
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (generate_pin): Use STRING random which is
sufficient for a passphrase.
(inq_cb): s/rc/err/. Do not print two errors in case generate_pin
fails. Lowercase strings as per GNU standards.
(setup_genpin): Fix translation test.
(setup_qualitybar): Ditto.
--
Our policy is to use VERY_STRONG for a long term public key but not
for symmetric keys.
The GNU standards to demand that strings start with a lowercase
because that seems to be needed if it follows a prefix of for example
"gpg:". I don't actually like this becuase we need different strings
in interactive and standard mode but the majory of strings in GnuPGare
written this way. If a translation is necessary it can be done with
an en_GB or so locale.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Setup genpin.
(do_getpin): Update with new name for inquire callback.
(inq_quality): Rename to inq_cb and add genpin support.
(inq_cb): Renamed form inq_quality.
(generate_pin): New helper to generate a pin.
(agent_askpin): Fix some typos.
(setup_genpin): Provide new strings for pinentry.
--
This implements the gpg-agent side for generating a pin
especially for symmetric encryption using libgcrypt randomness
and checking it against the gpg-agent constraints.
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
