* scd/apdu.c (apdu_dev_list_finish): Don't call ccid_dev_scan_finish
with no table.
(apdu_open_reader): Only increment when it's zero.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (new_reader_slot): Lock is now in apdu_dev_list_start.
(close_pcsc_reader_direct, close_ccid_reader): RDRNAME is handled...
(apdu_close_reader): ... by this function now.
(apdu_prepare_exit): Likewise.
(open_ccid_reader): Open with dev_list.
(apdu_dev_list_start, apdu_dev_list_finish): New.
(apdu_open_one_reader): New.
(apdu_open_reader): Support multiple readers.
* scd/app.c (select_application): With SCAN, opening all readers
available, and register as new APP.
(app_write_learn_status): app->ref_count == 0 is valid for APP which is
not yet used.
(app_list_start, app_list_finish): New.
* scd/ccid-driver.c (struct ccid_driver_s): Remove RID and BCD_DEVICE.
Add BAI.
(parse_ccid_descriptor): BCD_DEVICE is now on the arguments.
(ccid_dev_scan, ccid_dev_scan_finish): New.
(ccid_get_BAI, ccid_compare_BAI, ccid_open_usb_reader): New.
(ccid_open_reader): Support multiple readers.
(ccid_set_progress_cb, ccid_close_reader): No RID any more.
--
With this change, multiple readers/tokens are supported by the internal
CCID driver of GnuPG. Until the changes of upper layers (scdaemon,
gpg-agent, and gpg front end), only a single reader is used, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/openpgp/defs.scm (with-ephemeral-home-directory): Make
hygienic, use define-macro, do not change to the ephemeral home
directory.
* tests/gpgsm/setup.scm: Change to the ephemeral home directory.
* tests/openpgp/setup.scm: Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/defs.scm (percent-decode): New function.
(bin-prefix): New variable.
(installed?): Likewise.
(tool-hardcoded): Use the new variables.
(gpg-conf): Use the new function to decode the values.
(gpg-components): Do not use '--build-prefix' when 'installed?'.
Signed-off-by: Justus Winter <justus@g10code.com>
* dirmngr/dns-stuff.c (enable_dns_tormode): Always succeed.
(reload_dns_stuff): Reset tor port.
* dirmngr/dirmngr.c (set_tor_mode): Also enable Tor mode for DNS.
(main): Remove warning that Tor mode may not fully work.
* dirmngr/server.c (cmd_dns_cert): Remove explicit Tor for DNS
initialization.
* dirmngr/t-dns-stuff.c (main): Remove option --new-circuit and error
checking for enable_dns_tormode.
--
This patch also resets the port on SIGHUP so that after starting Tor
SIGHUP is sufficient to use Tor. Without the SIGHUP and when not
using the Tor browser Dirmngr would keep on trying the Tor browser
port.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (libdns_init): Add debug level diagnostic on
success.
--
This output may help to avoid questions when evaluating an Assuan log.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/init.scm (finally): New macro.
* tests/gpgscm/tests.scm (letfd): Rewrite.
(with-working-directory): Likewise.
(with-temporary-working-directory): Likewise.
(lettmp): Likewise.
--
Rewrite all our macros using 'define-macro'. Use the new control flow
mechanism 'finally', or 'dynamic-wind' where appropriate. Make sure
the macros are hygienic. Reduce code duplication.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/gpgscm/scheme-private.h (struct port): Use boxed values for
filename and current line. This allows us to use the same Scheme
object for labeling all expressions in a file.
* tests/gpgscm/scheme.c (file_push): Use boxed type for filename.
(mark): Mark location objects of port objects.
(gc): Mark location objects in the load stack.
(port_clear_location): New function.
(port_reset_current_line): Likewise.
(port_increment_current_line): Likewise.
(file_pop): Adapt accordingly.
(port_rep_from_filename): Likewise.
(port_rep_from_file): Likewise.
(port_close): Likewise.
(skipspace): Likewise.
(token): Likewise.
(_Error_1): Likewise.
(opexe_0): Likewise.
(opexe_5): Likewise.
(scheme_deinit): Likewise.
(scheme_load_file): Likewise.
(scheme_load_named_file): Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* scd/ccid-driver.c (scan_or_find_usb_device): Don't scan for
configuration but use active configuration. Support alt_setting.
(scan_or_find_devices): Support alt_setting.
(ccid_open_reader): Support alt_setting.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (reader_table_lock, apdu_init): New.
(new_reader_slot): Serialize by reader_table_lock.
* scd/app.c (lock_app, unlock_app, app_new_register): Fix error code
usage.
(initialize_module_command): Call apdu_init.
* scd/scdaemon.c (main): Handle error for initialize_module_command.
--
This is a long standing bug. There are two different things; The
serialization of allocating a new SLOT, and the serialization of using
the SLOT. The latter was implemented in new_reader_slot by lock_slot.
However, the former was not done. Thus, there was a possible race where
a same SLOT is allocated to multiple threads.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app.c (lock_app): Rename from lock_reader and use internal field
of APP.
(unlock_app): Likewise.
(app_dump_state): Use APP.
(application_notify_card_reset): Remove.
(check_conflict): Change API for APP, instead of SLOT.
(check_application_conflict): Likewise.
(release_application_internal): New.
(app_reset): New.
(app_new_register): New.
(select_application): Change API for APP, instead of SLOT.
(deallocate_app, release_application): Modify for manage link.
(report_change): New.
(scd_update_reader_status_file): Moved from command.c and
use APP list, instead of VREADER.
(initialize_module_command): Moved from command.c.
* scd/command.c (TEST_CARD_REMOVAL): Remove.
(IS_LOCKED): Simplify.
(vreader_table): Remove.
(vreader_slot, update_card_removed): Remove.
(do_reset): Call app_reset.
(get_current_reader): Remove.
(open_card): Add SCAN arg.
(cmd_serialno): No retry, since retry is done in lower layer in apdu.c.
No do_reset, since it is done in lower layer.
Add clearing card_removed flag.
(cmd_disconnect): Call apdu_disconnect.
(send_client_notifications): Modify for APP.
(update_reader_status_file): Remove.
--
APP is the abstraction of the card application. For management of
cards, it is better to focus on the APP instead of the physical reader.
This change makes support of multiple card/token easier.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove any_status, last_status,
status, and change_counter field.
(new_reader_slot, dump_reader_status, ct_activate_card, open_ct_reader)
(connect_pcsc_card, open_pcsc_reader_direct, open_pcsc_reader_wrapped)
(open_ccid_reader, apdu_reset): Follow the change.
(ct_dump_reader_status): Remove.
(apdu_get_status_internal, apdu_get_status): Remove CHANGED arg.
(apdu_connect): Follow the change.
* scd/command.c (struct vreader_s): Remove reset_failed, any, and
changed field.
(cmd_getinfo, update_reader_status_file): Follow the change.
--
In the past, scdaemon monitors card insertion (as well as removal), so
the code has been complicated, and there has been duplication in two
layers. Now, it only monitors card removal, it's now simplified.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (scan_or_find_usb_device): Fix return value.
Support device with multiple CCID interfaces. Fix the case with
READERNO. Support partial string match of "reader-port" like PC/SC
driver.
--
I don't know any device with multiple CCID interfaces, though.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpg-wks-client.c (command_send): If we fail to lookup the
submission address, print a better error message. If it is because
the corresponding file doesn't exist, provide the hint that the server
probably doesn't support WKS.
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* scd/app-common.h (app_readcert, app_readkey, app_setattr, app_sign,
app_auth, app_decipher, app_get_challenge, app_check_pin): Add CTRL as
the second argument.
* scd/app.c: Supply CTRL to lock_reader calls.
* scd/command.c (cmd_readcert, cmd_readkey, cmd_pksign, cmd_auth,
cmd_pkdecrypt, cmd_setattr, cmd_random, cmd_checkpin): Follow the
change.
--
APP is an abstraction of the "card application". Most methods of APP
should have CTRL argument to report back progress to the session. This
change fixes FIXMEs for missing CTRL.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tests/gpgscm/scheme.c (opexe_5): Check that we have a file port
before accessing filename. Fixes a crash on 32-bit architectures.
Fixes-commit: e7429b1ced
Signed-off-by: Justus Winter <justus@g10code.com>
* common/t-exectool.c (test_executing_true): Try also /usr/bin/true.
(test_executing_false): Try also /usr/bin/false.
--
Reported-by: Nelson H. F. Beebe
I then ran a test on all our test lab systems, and found that
/bin/false is missing on DragonFlyBSD, FreeBSD, GhostBSD,
HardenedBSD, Mac OS X, MidnightBSD, Minix, one version of MirBSD,
NetBSD, OpenBSD, PacBSD, PCBSD, and TrueOS.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/Makefile.am (TEST_FILES): Add new file.
* tests/openpgp/defs.scm (plain-files): Add 'plain-large'.
(all-files): New variable.
(create-sample-files): New function.
(create-legacy-gpghome): Use new function.
* tests/openpgp/plain-large.asc: New file.
Signed-off-by: Justus Winter <justus@g10code.com>
* dirmngr/dns-stuff.c (DEFAULT_TIMEOUT): New.
(opt_timeout): New var.
(set_dns_timeout): New.
(libdns_res_open): Set the default timeout.
(libdns_res_wait): Use configurable timeout.
(resolve_name_libdns): Ditto.
* dirmngr/dirmngr.c (oResolverTimeout): New const.
(opts): New option --resolver-timeout.
(parse_rereadable_options): Set that option.
(main) <aGPGConfList>: Add --nameserver and --resolver-timeout.
* tools/gpgconf-comp.c (gc_options_dirmngr): Add --resolver-timeout
and --nameserver.
* dirmngr/http.c (connect_server): Fix yesterday introduced bug in
error diagnostic.
--
This timeout is a pretty crude thing because libdns has a few other
internal timeouts as well.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns-stuff.c (opt_debug, opt_verbose): New vars.
(set_dns_verbose): New func.
(libdns_switch_port_p): Add debug output.
(resolve_dns_name): Ditto.
(get_dns_cert): Ditto.
(get_dns_cname): Ditto.
(getsrv_libdns, getsrv_standard): Change SRVCOUNT to an unsigend int.
(getsrv): Rename to ...
((get_dns_srv): this. Add arg R_COUNT and return an error. Add debug
output.
* dirmngr/http.c: Adjust for chnaged getsrv().
* dirmngr/ks-engine-hkp.c (map_host): Ditto.
* dirmngr/t-dns-stuff.c (main): Ditto. Call set_dns_verbose.
* dirmngr/dirmngr.c (parse_rereadable_options): Call set_dns_verbose.
--
Due to our switch to Libdns getsrv didn't worked correctly because it
returned -1 for an NXDOMAIN. However, it is perfectly okay to have no
SRV record and thus we change the way this function is called to be
aligned with the other functions and also map NXDOMAIN to a zero SRV
record count.
Signed-off-by: Werner Koch <wk@gnupg.org>
