* g13/g13.c (aSuspend, aResume): New.
(opts): Add commands --suspend and --resume.
(main): Implement dummy command aUmount. Implement commands aResume
and aSuspend.
* g13/sh-cmd.c (cmd_suspend): New.
(cmd_resume): New.
(register_commands): Add commands RESUME and SUSPEND.
* g13/server.c (cmd_suspend): New.
(cmd_resume): New.
(register_commands): Add commands RESUME and SUSPEND.
* g13/be-dmcrypt.c (be_dmcrypt_suspend_container): New.
(be_dmcrypt_resume_container): New.
* g13/backend.c (be_suspend_container): New.
(be_resume_container): New.
* g13/suspend.c, g13/suspend.h: New.
* g13/mount.c (parse_header, read_keyblob_prefix, read_keyblob)
(decrypt_keyblob, g13_is_container): Move to ...
* g13/keyblob.c: new file.
(keyblob_read): Rename to g13_keyblob_read and make global.
(keyblob_decrypt): Rename to g13_keyblob_decrypt and make global.
* g13/sh-dmcrypt.c (check_blockdev): Add arg expect_busy.
(sh_dmcrypt_suspend_container): New.
(sh_dmcrypt_resume_container): New.
* g13/call-syshelp.c (call_syshelp_run_suspend): New.
(call_syshelp_run_resume): New.
--
The --suspend command can be used before a hibernate operation to make
the encrypted partition inaccessible and wipe the key from the memory.
Before --suspend is called a sync(1) should be run to make sure that
their are no dirty buffers (dmsetup, as called by g13, actually does
this for you but it does not harm to do it anyway. After the
partition has been suspended a
echo 3 >proc/sys/vm/drop_caches
required to flush all caches which may still have content from the
encrypted partition.
The --resume command reverses the effect of the suspend but to do this
it needs to decrypt again. Now, if the .gnupg directory lives on the
encrypted partition this will be problematic because due to the
suspend all processes accessing data on the encrypted partition will
be put into an uninterruptible sleep (ps(1) shows a state of 'D').
This needs to be avoided. A workaround is to have a separate GnuPG
home directory (say, "~/.gnupg-fallback") with only the public keys
required to decrypt the partition along with a properly setup
conf files. A
GNUPGHOME=$(pwd)/.gnupg-fallback g13 --resume
should then be able to resume the encrypted partition using the
private key stored on a smartcard.
The implementation is pretty basic right now but useful to me.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13-syshelp.c (main): Reject userids with a slash.
* g13/sh-dmcrypt.c (sh_dmcrypt_mount_container): Run mount if a
mountpoint is known.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/Makefile.am: Build new program.
* tests/openpgp/defs.inc: Use the new program.
* tests/openpgp/fake-pinentry.c: New file.
--
Building an executable that does not require an interpreter makes it
easier to use on Windows.
Signed-off-by: Justus Winter <justus@g10code.com>
* tests/openpgp/plain-largeo.asc: New file.
* tests/openpgp/version.test: Dearmor the new file instead of relying
on the source being present.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/exechelp-posix.c (gnupg_create_pipe): New function.
* common/exechelp-w32.c (INHERIT_{READ,WRITE,BOTH}): New macros.
(create_inheritable_pipe): Generalize so that both ends can be
inherited.
(do_create_pipe): Rename argument accordingly.
(gnupg_create_{in,out}bound_pipe): Use new flags.
(gnupg_create_pipe): New function.
(gnupg_spawn_process): Use new flags.
* common/exechelp-w32ce.c (gnupg_create_pipe): New stub.
* common/exechelp.h (gnupg_create_pipe): New prototype.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/exechelp-w32.c (gnupg_wait_process): Do not print an error if
the exit code can be returned. This makes the Windows version behave
like the POSIX version.
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/keyedit.c (sig_comparison): New function.
(fix_key_signature_order): Merge functionality into...
(check_all_keysigs): ... this function. Rewrite to eliminate
duplicates and use a systematic approach to detecting and moving
signatures that are out of order instead of a heuristic.
(fix_keyblock): Don't call fix_key_signature_order. Call
check_all_keysigs instead after collapsing the uids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2236
* g10/sig-check.c (hash_uid_node): Rename from this...
(hash_uid_packet): ... to this. Take a PKT_user_id instead of a
KBNODE.
(check_key_signature2): Split the basic signature checking
functionality into...
(check_signature_over_key_or_uid): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keyedit.c (print_and_check_one_sig): Split the print
functionality into...
(print_one_sig): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/sig-check.c (check_signature_end): Break the basic signature
check into...
(check_signature_end_simple): ... this new function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keyedit.c (menu_addrevoker): Use format_keyid rather than
manually formatting the keyid.
* g10/keygen.c (card_write_key_to_backup_file): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/keydb.h (keyid_cmp): New function.
* g10/keyid.c (pk_keyid): New function.
(pk_main_keyid): New function.
(keyid_copy): New function.
(pk_keyid_str): New function.
* g10/packet.h (PKT_public_key): Update comments for main_keyid and
keyid.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
Before accessing pk->keyid, it is necessary to call keyid_from_pk (pk,
NULL) to ensure that pk->keyid is valid. Because it is easy to forget
to do this, these accessor functions take care of it.
* tools/gpgparsemail.c: Add and check info->signing_protocol_2.
--
Some mailers in the wild will generate messages that have the a weird
structure where they use the x- prefix in one part and drop it in
another.
For example, the main MIME part as a whole has:
Content-Type: multipart/signed;
protocol="application/x-pkcs7-signature"
but the signature sub-part has:
Content-Type: application/pkcs7-signature
(or vice versa, where the x- prefix is in the sub-part but not the
protocol= section on the main MIME object)
This change also avoids allocating strings for these comparisons,
since the const strings in question are already available in the built
executable, and no dynamic labels are needed.
===
- 2 lines reformatted to keep them below 90 cols. - wk
* g10/keydb.h: Remove agent_open, agent_close declarations/
* g10/migrate.c: #include <unistd.h> for access()
--
agent_open() is only defined statically in common/simple-pw-query.c,
it is neither used nor referenced anywhere else. agent_close doesn't
exist anywhere. The removal of these declarations removes an
unecessary inclusion of libassuan.h.
migrate.c was relying on keydb.h -> libassuan.h -> unistd.h for the
declaration of access(), so we now handle that explicitly instead.
* configure.ac: Add hack to disable libusb for Windows. Also use
$host instead of $target in the switch
--
The new test for libusb does not support cross-compiling. As a quick
workaround we disable libusb for Windows because we can't use it anyway.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (check_portable_app): Remove error message.
--
It is sometimes useful to install just gpgv and no other parts. Our
test for a portable application returned an error if gpgconf is not
installed. That error is not required but was merely a debug aid.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/armor.c (radix64_read): If the = is followed by the string "3D",
check if the following four characters are valid radix 64 and are
followed by a new line. If so, warn and ignore the '3D'.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2250
* doc/gnupg-module-overview.svg: New.
* doc/debugging.texi (Component interaction): New.
* doc/Makefile.am (EXTRA_DIST): Add PNG and PDF versions of
gnupg-module-overview.svg. Remove two eps files.
(BUILT_SOURCES): Add gnupg-module-overview.pdf and .png. Remove
gnupg-card-architecture.epsl
(gnupg_TEXINFOS): Add gnupg-module-overview.svg
(gnupg.dvi): New.
(DISTCLEANFILES): Remove build eps files.
--
Many thanks to Emanuel Schütze for helping with the redesign of the
module overview. The original file has been used by mere for years in
talks but was never a proper part of GnuPG.
The EPS files have been removed due to their size. Thus to build the
"dvi" target the convert tool is required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/build-packet.c (calc_header_length): Return the correct haeder
size when LEN is 0. Fix documentation.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
GnuPG-bug-id: 2240
* g10/keyid.c (format_keyid): Return a char *, not a const char *. If
BUFFER is NULL, then set LEN to the static buffer's size.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g13/g13-syshelp.c (g13_syshelp_i_know_what_i_am_doing):
* g13/sh-dmcrypt.c (sh_dmcrypt_create_container): Call it.
(sh_dmcrypt_mount_container): Call it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/be-dmcrypt.c, g13/be-dmcrypt.h: New.
* g13/Makefile.am (g13_SOURCES): Add them.
* g13/backend.c: Include be-dmcrypt.h and call-syshelp.h.
(no_such_backend): Rename to _no_such_backend and provide replacement
macro.
(be_is_supported_conttype): Support DM-Crypt.
(be_take_lock_for_create): Call set_segvice for DM-Crypt.
(be_create_new_keys): Make it a dummy for DM-Crypt.
(be_create_container): Call be_dmcrypt_create_container.
(be_mount_container): call be_dmcrypt_mount_container.
* g13/g13-syshelp.c (main): Enable verbose mode.
* g13/g13tuple.c (get_tupledesc_data): New.
* g13/g13tuple.h (unref_tupledesc): New.
* g13/g13.h (server_control_): Add field "recipients".
* g13/g13.c (main): Fix setting of recipients via cmdline.
(g13_deinit_default_ctrl): Release recipients list.
(g13_request_shutdown): New. Replace all direct update of
shutdown_pending by calls this function.
* g13/server.c (server_local_s): Remove field recipients which is now
part of CTRL.
(reset_notify, cmd_recipient, cmd_create): Adjust for this change.
* g13/create.c (encrypt_keyblob): Rename to g13_encrypt_keyblob.
(g13_create_container): Support DM-Crypt.
* g13/mount.c (parse_header): Allow for meta data copies.
(g13_mount_container): Support DM-Crypt.
* g13/sh-cmd.c (cmd_create): Make it work.
(cmd_mount): New.
* g13/sh-dmcrypt.c (sh_dmcrypt_create_container): Make it work.
(sh_dmcrypt_mount_container): New.
--
With this patch we can now create an encrypted partition and partly
mount it (i.e. setup keys and create the mapped device). We do not yet
create a file system or mount that file system
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/create.c (g13_create_container): Factor some code out to ...
* g13/backend.c (be_take_lock_for_create): new.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/sh-exectool.c: Remove. It has been replaced by common/exectool.c.
* g13/Makefile.am (g13_syshelp_SOURCES): Remove sh-exectool.c
* g13/sh-blockdev.c: Include exectool.h. Change sh_exec_tool to
gnupg_exec-tool.
* g13/sh-dmcrypt.c: Ditto.
--
With commit 2ae07f826a the exectool code
was moved from a g13 feature branch to common/ so that it could be
used by gpgtar. With this patch we finally remove the original code
and use the one in common/.
Signed-off-by: Werner Koch <wk@gnupg.org>
