* dirmngr/crlfetch.c (crl_fetch): Check that URL is not NULL.
--
Reported-by: Joshua Rogers <git@internot.info>
"Remove un-needed check. If 'url' were not to be true,
http_parse_uri(parse_uri(do_parse_uri))) would fail, leaving 'err'
false."
In addition I added an explicit check for the URL arg not beeing NULL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ldapserver.c (ldapserver_parse_one): Set SERVER to NULL.
* sm/gpgsm.c (parse_keyserver_line): Ditto.
--
Reported-by: Joshua Rogers <git@internot.info>
"If something inside the ldapserver_parse_one function failed,
'server' would be freed, then returned, leading to a
use-after-free. This code is likely copied from sm/gpgsm.c, which
was also susceptible to this bug."
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-hkp.c (map_host): Change to return an gpg_error_t.
Return an error code for all dead hosts.
(make_host_part): Change to return an gpg_error_t. Change all
callers.
--
The functions used to return an error code via ERRNO. However, this
does not allow to return extra error codes in a portable way. Thus we
change the function to directly return a gpg_error_t.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Make use of TLS macros.
--
Only report support for the hkps scheme when GnuPG / dirmngr
has been built with a TLS library.
This helps debuging and enable the user to detect whether support
for hkps is included by doing a
`gpg-connect-agent --dirmngr 'keyserver --help' /bye`.
Currently hkps will be listed as a supported scheme but trying to
add a keyserver using it will silently fail.
As a digression, https is never listed as a valid scheme.
* gl/: Remove entire tree.
* configure.ac: Remove gnulib tests and the gl/ Makefile.
(setenv): Add to AC_CHECK_FUNCS.
* autogen.rc (extra_aclocal_flags): Set to empty.
* Makefile.am (ACLOCAL_AMFLAGS): Remove -I gl/m4
(SUBDIRS): Remove gl/.
* agent/Makefile.am (common_libs): Remove ../gl/gnulib.a
* common/Makefile.am (t_common_ldadd): Ditto.
* dirmngr/Makefile.am (dirmngr_LDADD): Ditto.
(dirmngr_ldap_LDADD, dirmngr_client_LDADD): Ditto.
* g10/Makefile.am (needed_libs): Ditto.
* g13/Makefile.am (g13_LDADD): Ditto.
* kbx/Makefile.am (kbxutil_LDADD): Ditto.
($(PROGRAMS)): Ditto.
* scd/Makefile.am (scdaemon_LDADD): Ditto.
* sm/Makefile.am (common_libs): Ditto.
* tools/Makefile.am (common_libs, commonpth_libs): Ditto.
* agent/gpg-agent.c: Remove "mkdtemp.h"
* g10/exec.c: Ditto.
* scd/scdaemon.c: Ditto.
* tools/symcryptrun.c: Ditto.
* common/sysutils.c: Remove "setenv.h"
* common/t-timestuff.c: Use putenv if setenv is not available.
--
gnulib has always been a cause of trouble in GnuPG because we used
only a very few functions and the complex include machinery of gnulib
is quite complex and the cause for many build problems for example on
OS X. This is not gnulib's fault but due to our limited use of gnulib
and that we only rarely update the gnulib code to avoid regressions.
In part two we will address the functions
mkdtemp
setenv
unsetenv
strpbrk
which may bot be implemented on all platforms. They are not required
on a libc based system.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Add option --disable-ldap.
(USE_LDAP): New ac_define and am_conditional.
* dirmngr/Makefile.am: Take care of USE_LDAP.
* dirmngr/dirmngr.c (!USE_LDAP): Make all ldap options dummy options
and do not call any ldap function.
* dirmngr/server.c (!USE_LDAP): Do not call any ldap function.
* dirmngr/crlfetch.c (!USE_LDAP): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/Makefile.am: Avoid $(DNSLIBS) for dirmngr_ldap
* g10/Makefile.am: $(LIBREADLINE) is only for gpg2; gpgv2 does not
need $(LIBASSUAN_LIBS)
* sm/Makefile.am: gpgsm does not need $(ZLIBS)
* tools/Makefile.am: gpgconf does not need $(NPTH_LIBS)
--
In the course of building GnuPG 2.1.0 beta864 on debian, i found that
several of the installed executables were linked to libraries that
they did not need to be linked to, which would cause unnecessary
package dependencies at runtime.
The changeset here removes these unnecessary libraries from linking.
Something similar could possibly also be done by passing --as-needed
to the linker, but trimming the depenencies seems more parsimonious.
* configure.ac (NEED_NTBTLS_ABI, NEED_NTBTLS_VERSION): New.
(HTTP_USE_NTBTLS): New. Prefer over GNUTLS.
* m4/ntbtls.m4: New.
* m4/Makefile.am (EXTRA_DIST): Add new file.
* common/http.c: Add conditionals to eventually use NTBTLS.
--
This is only the configure stuff. If you have NTBTLS installed GNUTLS
will not be used but there won't be any https support either :-(.
This patch is used to have a real world test bench for the forthcoming
library.
* dirmngr/ks-engine-hkp.c (cert_log_cb): Move to ...
* dirmngr/misc.c (cert_log_cb): here.
* dirmngr/ks-engine-http.c (ks_http_fetch): Support 307-redirection
and https.
--
Note that this requires that the root certificates are registered using
the --hkp-cacert option. Eventually we may introduce a separate
option to allow using different CAs for KS_FETCH and keyserver based
requests.
* dirmngr/ks-engine-hkp.c (hostinfo_s): Add fields cname, v4addr, and
v6addr.
(create_new_hostinfo): Clear them.
(my_getnameinfo): Add args numeric and r_isnumeric.
(is_ip_address): New.
(map_host): Add arg r_host. Rewrite the code to handle pools in a
special way.
(ks_hkp_print_hosttable): Change format of help info output.
(make_host_part): Add arg optional r_httphost.
(send_request): Add arg httphost.
(ks_hkp_search, ks_hkp_get, ks_hkp_put): Get httphost and pass it to
send_request.
--
This changes quite some things on how the hostinfo is maintained.
However, it might be better to rework the data structures and have one
entry per IP address instead of this clumsy patch.
* common/http.c (http_open): Add arg httphost.
(http_open_document): Pass NULL for httphost.
(send_request): Add arg httphost. If given, use HTTPHOST instead of
SERVER. Use https with a proxy if requested.
(http_verify_server_credentials): Do not stop at the first error
message.
* dirmngr/ocsp.c (do_ocsp_request): Adjust call to http_open.
* keyserver/curl-shim.c (curl_easy_perform): Ditto.
* dirmngr/ks-engine-http.c (ks_http_fetch): Ditto.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Ditto.
* common/Makefile.am ($(PROGRAMS)): New rule
(t_http_LDADD): Use libcommontls.a without directory prefix.
* dirmngr/Makefile.am ($(PROGRAMS)): New rule.
* common/mischelp.h (JNLIB_GCC_HAVE_PUSH_PRAGMA): New.
* dirmngr/dirmngr.c (handle_tick): Factor time check out to ...
(time_for_housekeeping_p): new.
--
I am not sure whether that y2038 hack is really useful but it might
make me smile in my retirement.
* dirmngr/dirmngr.c (HOUSEKEEPING_INTERVAL): New.
(housekeeping_thread): New.
(handle_tick): Call new function.
* dirmngr/ks-engine-hkp.c (RESURRECT_INTERVAL): New.
(struct hostinfo_s): Add field died_at and set it along with the dead
flag.
(ks_hkp_print_hosttable): Print that info.
(ks_hkp_housekeeping): New.
--
The resurrection gives the host a chance to get back to life the next
time a new host is selected.
* dirmngr/ks-engine-hkp.c (ks_hkp_get): Allow exact search mode.
* g10/keyserver.c (keyserver_import_name): Implement.
(keyserver_get): Use exact mode for name based import.
(keyserver_get): Add args R_FPR and R_FPRLEN. Change all callers.
* dirmngr/ks-engine-hkp.c (ks_hkp_search, ks_hkp_get): Print SOURCE
status lines.
* g10/call-dirmngr.c (ks_status_parm_s): New.
(ks_search_parm_s): Add field stparm.
(ks_status_cb): New.
(ks_search_data_cb): Send source to the data callback.
(gpg_dirmngr_ks_search): Change callback prototope to include the
SPECIAL arg. Adjust all users. Use ks_status_cb.
(gpg_dirmngr_ks_get): Add arg r_source and use ks_status_cb.
* g10/keyserver.c (search_line_handler): Adjust callback and print
"data source" disgnostic.
(keyserver_get): Print data source diagnostic.
--
It has often been requested that the actually used IP of a keyservers
is shown in with gpg --recv-key and --search-key. This is helpful if
the keyserver is actually a pool of keyservers. This patch does this.
* dirmngr/ks-action.c (ks_action_resolve): Rename var for clarity.
(ks_action_search, ks_action_put): Ditto.
(ks_action_get): Consult only the first server which retruned some
data.
* dirmngr/ks-engine-hkp.c (SEND_REQUEST_RETRIES): New.
(map_host): Add arg CTRL and call dirmngr_tick.
(make_host_part): Add arg CTRL.
(mark_host_dead): Allow the use of an URL.
(handle_send_request_error): New.
(ks_hkp_search, ks_hkp_get, ks_hkp_put): Mark host dead and retry on
error.
* dirmngr/server.c (cmd_killdirmngr): Factor some code out to ...
(check_owner_permission): here.
(cmd_keyserver): Add options --dead and --alive.
* dirmngr/ks-engine-hkp.c (host_in_pool_p): New.
(ks_hkp_mark_host): New.
--
Also removed the warning that the widnows part has not yet been done.
AFAICS, the current mingw supports the all used socket functions.
* dirmngr/cdblib.c (cdb_init) [W32]: Remove unused var.
* dirmngr/dirmngr-client.c (start_dirmngr): s/int/assuan_fd_t/.
* dirmngr/dirmngr.c (w32_service_control): Mark unused args.
(call_real_main): New.
(main) [W32]: Use new function to match prototype.
(real_main) [W32]: Mark unused vars.
(handle_signal) [W32]: Do not build the function at all.
(handle_connections) [W32]: Do not define signo.
* dirmngr/ldap-wrapper-ce.c (outstream_reader_cb): Remove used vars.
* g10/tdbio.c (ftruncate) [DOSISH]: Define only if not yet defined.
* dirmngr/ldap-url.c (ldap_utf8_strtok): Remove unused r3d arg.
(ldap_str2charray): Remove lasts.
--
I have no clue why an utf8 version was planned to be used. Do the
LDAP folks really assume that eventually non-ascii delimiters might be
used? Simplified it to silence the warning about an used helper var.
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
Werner Koch