* agent/command.c (cmd_getinfo): Return GPG_ERR_FALSE as boolean False.
* g13/server.c (cmd_getinfo): Ditto.
* sm/server.c (cmd_getinfo): Ditto.
--
GPG_ERR_FALSE was introduced with libgpg-error 1.21 and we now require
a later version for gnupg 2. Thus we can switch to this more
descriptive code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp2.c (vprint_assuan_status_strings): New.
(print_assuan_status_strings): New.
* agent/command.c (agent_write_status): Replace by call to new
function.
* dirmngr/server.c (dirmngr_status): Ditto.
* g13/server.c (g13_status): Ditto.
* g13/sh-cmd.c (g13_status): Ditto.
* sm/server.c (gpgsm_status2): Ditto.
* scd/command.c (send_status_info): Bump up N.
--
This fixes a potential overflow if LFs are passed to the status
string functions. This is actually not the case and would be wrong
because neither the truncating in libassuan or our escaping is not the
Right Thing. In any case the functions need to be more robust and
comply to the promised interface. Thus the code has been factored out
to a helper function and N has been bumped up correctly and checked in
all cases.
For some uses this changes the behaviour in the error case (i.e. CR or
LF passed): It will now always be C-escaped and not passed to
libassuan which would truncate the line at the first LF.
Reported-by: private_pers
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* Makefile.am (TESTS_ENVIRONMENT): New variable.
(check-all): New phony target to run all tests.
* tests/gpgme/gpgme-defs.scm (have-gpgme?): New function that tests
whether the GPGME test suite is available instead of exiting the
process.
* tests/gpgscm/init.scm (export): New macro.
* tests/gpgscm/tests.scm (run-tests): New function.
(load-tests): Likewise.
* tests/gpgme/run-tests.scm: Simplify and move the parsing of the list
of tests to 'all-tests.scm'.
* tests/gpgsm/run-tests.scm: Likewise.
* tests/migrations/run-tests.scm: Likewise.
* tests/openpgp/run-tests.scm: Likewise.
* tests/gpgme/Makefile.am: To select the tests to run, use the
variable 'TESTS'. This harmonizes the interface with the automake
test suite.
* tests/gpgsm/Makefile.am: Likewise.
* tests/migrations/Makefile.am: Likewise.
* tests/openpgp/Makefile.am: Likewise.
* tests/openpgp/README: Likewise.
* agent/all-tests.scm: New file.
* common/all-tests.scm: Likewise.
* g10/all-tests.scm: Likewise.
* g13/all-tests.scm: Likewise.
* tests/gpgme/all-tests.scm: Likewise.
* tests/gpgsm/all-tests.scm: Likewise.
* tests/migrations/all-tests.scm: Likewise.
* tests/openpgp/all-tests.scm: Likewise.
* tests/run-tests.scm: Likewise.
--
This change allows us to run all tests in parallel and write one XML
report capturing the results of every test. It also lays the
foundation to parametrize test suites.
Signed-off-by: Justus Winter <justus@g10code.com>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/sh-cmd.c (cmd_getkeyblob): New.
(register_commands): Register it.
* g13/call-syshelp.c (getkeyblob_data_cb): New.
(call_syshelp_get_keyblob): New.
* g13/mount.c: Include callsyshelp.h.
(g13_mount_container): Ask syshelp whether the filename is managed by
g13tab. Call syshelp to get the encrypted keyblob in this case.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/keyblob.c (g13_keyblob_decrypt): Move to ...
* g13/server.c: to here.
* g13/suspend.c, g13/mount.c: Include server.h.
* g13/Makefile.am (g13_syshelp_SOURCES): Add keyblob.c
--
This is done to be able to use keyblob read code in syshelp w/o
requiring linking to call-gpg.c
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* g13/g13tuple.c (create_tupledesc): Init refcount to 1.
--
The old code somehow assumed that calloc was used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13.c (aSuspend, aResume): New.
(opts): Add commands --suspend and --resume.
(main): Implement dummy command aUmount. Implement commands aResume
and aSuspend.
* g13/sh-cmd.c (cmd_suspend): New.
(cmd_resume): New.
(register_commands): Add commands RESUME and SUSPEND.
* g13/server.c (cmd_suspend): New.
(cmd_resume): New.
(register_commands): Add commands RESUME and SUSPEND.
* g13/be-dmcrypt.c (be_dmcrypt_suspend_container): New.
(be_dmcrypt_resume_container): New.
* g13/backend.c (be_suspend_container): New.
(be_resume_container): New.
* g13/suspend.c, g13/suspend.h: New.
* g13/mount.c (parse_header, read_keyblob_prefix, read_keyblob)
(decrypt_keyblob, g13_is_container): Move to ...
* g13/keyblob.c: new file.
(keyblob_read): Rename to g13_keyblob_read and make global.
(keyblob_decrypt): Rename to g13_keyblob_decrypt and make global.
* g13/sh-dmcrypt.c (check_blockdev): Add arg expect_busy.
(sh_dmcrypt_suspend_container): New.
(sh_dmcrypt_resume_container): New.
* g13/call-syshelp.c (call_syshelp_run_suspend): New.
(call_syshelp_run_resume): New.
--
The --suspend command can be used before a hibernate operation to make
the encrypted partition inaccessible and wipe the key from the memory.
Before --suspend is called a sync(1) should be run to make sure that
their are no dirty buffers (dmsetup, as called by g13, actually does
this for you but it does not harm to do it anyway. After the
partition has been suspended a
echo 3 >proc/sys/vm/drop_caches
required to flush all caches which may still have content from the
encrypted partition.
The --resume command reverses the effect of the suspend but to do this
it needs to decrypt again. Now, if the .gnupg directory lives on the
encrypted partition this will be problematic because due to the
suspend all processes accessing data on the encrypted partition will
be put into an uninterruptible sleep (ps(1) shows a state of 'D').
This needs to be avoided. A workaround is to have a separate GnuPG
home directory (say, "~/.gnupg-fallback") with only the public keys
required to decrypt the partition along with a properly setup
conf files. A
GNUPGHOME=$(pwd)/.gnupg-fallback g13 --resume
should then be able to resume the encrypted partition using the
private key stored on a smartcard.
The implementation is pretty basic right now but useful to me.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13-syshelp.c (main): Reject userids with a slash.
* g13/sh-dmcrypt.c (sh_dmcrypt_mount_container): Run mount if a
mountpoint is known.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13-syshelp.c (g13_syshelp_i_know_what_i_am_doing):
* g13/sh-dmcrypt.c (sh_dmcrypt_create_container): Call it.
(sh_dmcrypt_mount_container): Call it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/be-dmcrypt.c, g13/be-dmcrypt.h: New.
* g13/Makefile.am (g13_SOURCES): Add them.
* g13/backend.c: Include be-dmcrypt.h and call-syshelp.h.
(no_such_backend): Rename to _no_such_backend and provide replacement
macro.
(be_is_supported_conttype): Support DM-Crypt.
(be_take_lock_for_create): Call set_segvice for DM-Crypt.
(be_create_new_keys): Make it a dummy for DM-Crypt.
(be_create_container): Call be_dmcrypt_create_container.
(be_mount_container): call be_dmcrypt_mount_container.
* g13/g13-syshelp.c (main): Enable verbose mode.
* g13/g13tuple.c (get_tupledesc_data): New.
* g13/g13tuple.h (unref_tupledesc): New.
* g13/g13.h (server_control_): Add field "recipients".
* g13/g13.c (main): Fix setting of recipients via cmdline.
(g13_deinit_default_ctrl): Release recipients list.
(g13_request_shutdown): New. Replace all direct update of
shutdown_pending by calls this function.
* g13/server.c (server_local_s): Remove field recipients which is now
part of CTRL.
(reset_notify, cmd_recipient, cmd_create): Adjust for this change.
* g13/create.c (encrypt_keyblob): Rename to g13_encrypt_keyblob.
(g13_create_container): Support DM-Crypt.
* g13/mount.c (parse_header): Allow for meta data copies.
(g13_mount_container): Support DM-Crypt.
* g13/sh-cmd.c (cmd_create): Make it work.
(cmd_mount): New.
* g13/sh-dmcrypt.c (sh_dmcrypt_create_container): Make it work.
(sh_dmcrypt_mount_container): New.
--
With this patch we can now create an encrypted partition and partly
mount it (i.e. setup keys and create the mapped device). We do not yet
create a file system or mount that file system
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/create.c (g13_create_container): Factor some code out to ...
* g13/backend.c (be_take_lock_for_create): new.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/sh-exectool.c: Remove. It has been replaced by common/exectool.c.
* g13/Makefile.am (g13_syshelp_SOURCES): Remove sh-exectool.c
* g13/sh-blockdev.c: Include exectool.h. Change sh_exec_tool to
gnupg_exec-tool.
* g13/sh-dmcrypt.c: Ditto.
--
With commit 2ae07f826a the exectool code
was moved from a g13 feature branch to common/ so that it could be
used by gpgtar. With this patch we finally remove the original code
and use the one in common/.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/Makefile.am (common_sources): Add files.
* g13/call-gpg.c: Move to 'common' and adapt slightly. Add a
parameter to let callees override the gpg program to execute.
* g13/call-gpg.h: Likewise.
* g13/Makefile.am (g13_SOURCES): Drop files.
* g13/create.c (encrypt_keyblob): Hand in the gpg program to execute.
* g13/mount.c (decrypt_keyblob): Likewise.
Signed-off-by: Justus Winter <justus@g10code.com>
* g13/g13-common.c, g13/g13-common.h: New.
* g13/Makefile.am (g13_SOURCES): Add new files.
* g13/g13.c (g13_errors_seen): Move to g13-common.c.
(cmdline_conttype): New.
(main): Use g13_init_signals and g13_install_emergency_cleanup.
(emergency_cleanup, g13_exit): Move to g13-common.c.
* g13/g13.h: Move OPT and some other code to g13-common.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
