* g10/parse-packet.c (parse): Use an int to compare to -1. Use
buf32_to_ulong.
--
Regression-due-to: 0add91ae1c
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Change revkey's type from a struct
revocation_key ** to a struct revocation_key *. Update users.
--
revkey was a pointer into the raw data. But, C doesn't guarantee that
there is no padding. Thus, we copy the data.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse): We don't handle copying packets with a
partial body length to an output stream. If this occurs, log an error
and abort.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (dbg_copy_all_packets): Check that OUT is not
NULL.
(copy_all_packets): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse_signature): Make sure PKTLEN doesn't
underflow. Be more careful that a read doesn't read more data than
PKTLEN says is available.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* po/POTFILES.in (trust.c): Add missing file.
* po/de.po: Changed German validity strings.
* doc/help.de.txt: Ditto.
--
Note that I replaced "uneingeschränkt" in de.po to "ultimativ" to
make the output better readable.
* g10/packet.h: Add documentation for functions defined in
parse-packet.c.
* g10/parse-packet.c: Improve comments for many functions.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h (enum_sig_subpkt): Remove argument RET_N. Update
callers.
* g10/parse-packet.c (enum_sig_subpkt): Remove argument RET_N.
--
Remove the RET_N argument, because it is unused and because it is
meaningless: it's not clear whether it is an offset into SIG->HASHED
or SIG->UNHASHED.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (mpi_read): Improve documentation. Correctly
handle an EOF. On overflow, correctly return the number of bytes read
from the pipeline.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read): Make control flow more obvious.
(iobuf_get_filelength): Likewise.
(iobuf_get_fd): Likewise.
(iobuf_seek): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_alloc): Check that BUFSIZE is not 0.
(iobuf_readbyte): Check that A is an input filter. Check that the
amount of read data is at most the amount of buffered data.
(iobuf_read): Check that A is an input filter.
(iobuf_writebyte): Check that A is not an input filter.
(iobuf_writestr): Check that A is not an input filter.
(iobuf_flush_temp): Check that A is not an input filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the head filter is a temp
filter, use IOBUF_BUFFER_SIZE for the new filter.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_push_filter2): If the pipeline is an output or
temp pipeline, the new filter shouldn't assume ownership of the old
head's internal buffer: the data was written before the filter was
added.
* common/t-iobuf.c (double_filter): New function.
(main): Add test cases for the above bug.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_to_buffer): Flush each filter in the
pipeline and copy the data from the last (not the first) filter's
internal buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (do_open): New function, which is a generalization of
iobuf_open, iobuf_Create, iobuf_openrw.
(iobuf_open): Call do_open.
(iobuf_create): Likewise.
(iobuf_openrw): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_cancel): Don't abort freeing a pipeline if
freeing a filter fails. This needs to a memory leak. Instead, keep
freeing and return the error code of the first filter that fails.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Take additional parameter
clear_pending_eof. If not set, don't clear a pending eof when
returning EOF. Update callers.
(iobuf_peek): Fill the internal buffer, if needed, to be able to
better satisfy any request.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (underflow): Don't require that the buffer be empty.
When called, fill any available space.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_read_line): Be more careful with boundary
conditions.
* common/iobuf.h: Include <gpg-error.h>.
* common/t-iobuf.c: New file.
* common/Makefile.am (module_tests): Add t-iobuf.
(t_mbox_util_LDADD): New variable.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c (iobuf_temp_with_content): Set the filter type to
IOBUF_INPUT, not IOBUF_TEMP, which is only for output filters that
write into a dynamic buffer.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Remove field desc.
* common/iobuf.c (iobuf_desc): New function. When a filter's
description is needed, use this instead of the filter's desc field.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (struct iobuf_struct): Clarify semantics of nofast.
Simplify use of nofast to implement just these semantics.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.c: Move BLOCK_FILTER_INPUT,
BLOCK_FILTER_OUTPUT_BLOCK_FILTER_TEMP from here...
* common/iobuf.h: ... to here and rename to IOBUF_INPUT, IOBUF_OUTPUT
and IOBUF_TEMP, respectively. Where appropriate, use these macros
instead of a literal.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox.h (KEYBOX_WITH_X509): Do not define.
* sm/Makefile.am (AM_CPPFLAGS): Define it here.
(common_libs): Change to libkeybox509.a
* g10/Makefile.am (AM_CFLAGS): remove KSBA_CFLAGS.
(gpg2_LDADD, gpgv2_LDADD): Remove KSBA_LIBS
* kbx/Makefile.am (noinst_LIBRARIES): Add libkeybox509.a.
(libkeybox509_a_SOURCES): New.
(libkeybox_a_CFLAGS): New.
(libkeybox509_a_CFLAGS): New.
(kbxutil_CFLAGS): New.
* kbx/keybox-search.c (has_keygrip) [!KEYBOX_WITH_X509]: Declare args
as unused.
--
There is no real need to link to Libksba in gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_get_passphrase): Don't repeat passphrase for
pinentry loopback mode.
* agent/genkey.c (check_passphrase_constraints): Immediately return when
pinentry mode is loopback.
--
Fixes endless loop when inquiring a passphrase with
pinentry-mode=loopback that may not satisfy passphrase contraints.
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* g10/gpg.c (main): test for --command-fd during --gen-key parse.
When --command-fd is set then imply --batch to let gpg inquire a
passphrase rather than requiring a pinentry.
* common/iobuf.c (BLOCK_FILTER_INPUT): Define. Where appropriate, use
this instead of a literal.
(BLOCK_FILTER_OUTPUT): Likewise.
(BLOCK_FILTER_TEMP): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
