* tools/wks-receive.c (decrypt_data): Change limit.
--
The former limit ~1MiB of was used during development.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_kill): Reverse the order.
--
The order matters in a corner case; On a busy machine, there was a
race condition between gpg-agent's running KILLAGENT command and its
accepting incoming request on the socket. If a request by
gpg-connect-agent was accepted, it resulted an error by sudden
shutdown. This change of the order can remove such a race.
Here, we know backend=0 is none.
GnuPG-bug-id: 4577
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgparsemail.c (parse_message): Revert the change.
* tools/rfc822parse.c (transition_to_body): Set ERRNO.
(transition_to_header, insert_header): Likewise.
--
In the comment of rfc822parse_* functions, it explicitly explained
setting ERRNO on error. For parser errors, it may not have
appropriate ERRNO, in such a case, use ENOENT.
Fixes-commit: c13e459ffeffb8c5387c44b3c04bb92b7111a75b
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf-comp.cb (gc_options_dirmngr): correct capitalization
of Tor.
--
https://www.torproject.org/docs/faq.html.en#WhyCalledTor says:
> Note: even though it originally came from an acronym, Tor is not
> spelled "TOR". Only the first letter is capitalized. In fact, we can
> usually spot people who haven't read any of our website (and have
> instead learned everything they know about Tor from news articles) by
> the fact that they spell it wrong.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* tools/card-yubikey.c (yubikey_commands): Add new arg INFO and test
for Yubikey-5.
* tools/gpg-card.c (cmd_yubikey): Pass info to yubikey_commands.
--
The configuration can be read from a Yubikey-4 but not be written.
The mode command is also not useful because it allows only the
selection of transports. It does not allow to disable single
applications based on one transport (like OPGP and PIV). Thsi patch
shows an appropriate error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-create.c (gpgtar_create): Switch to the -C directory.
--
The -C option is pretty useful given that pattern are always relative
to the current directory. In contrast to GNU tar, the switching is
done only once.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oEnableExtendedKeyFormat): Re-introduce.
(parse_rereadable_options): Handle it in a special way.
* agent/protect.c (agent_protect): Be safe and set use_ocb only to 1
or 0.
* tools/gpgconf-comp.c: Add --enable-extended-key-format again.
--
This is required for backward compatible with profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar.h (struct tarinfo_s): New.
* tools/gpgtar.c (cmd, skip_crypto, files_from, null_names): Move
global vars more to the top.
(set_cmd): Rename 'cmd' to 'c'.
* tools/gpgtar-list.c (parse_header): Add arg 'info' and improve error
messages.
(read_header): Add arg 'info' and update counter.
(skip_data): Ditto.
(gpgtar_list): Pass info object to read functions.
(gpgtar_read_header): Add arg 'info'.
* tools/gpgtar-extract.c (gpgtar_extract): add arg 'info' and pass on.
(extract_regular): Add arg 'info' and update counter.
--
This now prints the block number of a header with error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDisableExtendedKeyFormat, oNoop): New.
(oEnableExtendedKeyFormat): Remove.
(opts): Make --enable-extended-key-format a dummy option. Add
disable-extended-key-format.
(parse_rereadable_options): Implement oDisableExtendedKeyFormat.
--
Extended key format is supported since vesion 2.1.12 which should have
long been replaced by a newer version inh all installations. Thus for
2.3 we will make use of the extended-key-format by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Set card version for Yubikeys.
(app_write_learn_status): Print CARDVERSION and APPVERSION.
* tools/card-call-scd.c (learn_status_cb): Detect them.
* tools/gpg-card.h (struct card_info_s): Add appversion and
cardversion.
* tools/gpg-card.c (list_openpgp): Remove version printing from serial
number.
(print_a_version): New.
(list_card): Print card and app version.
(cmd_generate): Do not allow broken Yubikeys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-piv.c (concat_tlv_list): Add arg 'secure' and adjust
callers.
(writekey_rsa, writekey_ecc): New.
(do_writekey): New.
(do_writecert): Provide a better error message for an empty cert.
(app_select_piv): Register do_writekey.
* scd/iso7816.c (iso7816_send_apdu): New.
* scd/app-common.h (APP_WRITEKEY_FLAG_FORCE): New.
* agent/command.c (cmd_keytocard): Make the timestamp optional.
* tools/card-call-scd.c (inq_writekey_parms): Remove.
(scd_writekey): Rewrite.
* tools/gpg-card.c (cmd_writekey): New.
(enum cmdids): Add cmdWRITEKEY.
(dispatch_command, interactive_loop): Call cmd_writekey.
--
This has been tested with gpgsm and RSA keys. For ECC keys only
partly tested using the sample OpenPGP nistp256 and nistp384 keys
because gpgsm does not yet support ECC certificates and thus we can't
write the certificates to the cert object after a writekey. Note that
they nevertheless show up in "gpgcard list" because gpg-card searches
for them in gpg and gpgsm. However, this does not work completely.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card.c (cmd_passwd): Remove arg allow_admin.
(enum cmdids): Rename cmdAUTHENTICATE to cmdAUTH and cmdFACTORYRESET
to cmdFACTRST.
(cmds): Remove column 'admin_only'.
(interactive_loop): Remove admin_only stuff.
--
That command has always been an annoyance. Symbols have been renamed
for source cosmetics.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_t): Move this enum to ...
* tools/gpgconf.h: here.
* tools/gpgconf.c (oShowSocket): New.
(opts): Add new option.
(main): Implement new option.
--
This is a convenience options for software which directly connects to
gpg-agent and thus needs to new the socket. By using --show-socket
along with --launch that software can also autostart the agent or the
dirmngr. Without this two calls to gpgconf would be required.
Actually the same behaviour can be achieved by running
gpg-connect-agent to query the running gpg-agent's socket via GETINFO.
The gpg-connect also makes sure that the agent is started. This is
not anymore suggested because gpgconf shall in future be used for all
such things.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-keys.c: Rename to card-keys.c.
* tools/card-tool-misc.c: Rename to card-misc.c.
* tools/card-tool-yubikey.c: Rename to card-yubikey.c.
* tools/card-tool.h: Rename to gpg-card.h.
* tools/gpg-card-tool-w32info.rc: Rename to gpg-card-w32info.rc
* doc/card-tool.texi: Rename top gpg-card.texi
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card-tool.c (list_one_kinfo): Print the keyref.
--
The named keys are nice but knowing the actual keyref mapping to them
is also useful.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-yubikey.c: New.
* tools/Makefile.am (gpg_card_tool_SOURCES): Add it.
* tools/card-call-scd.c (scd_apdu): Allow returning data.
* tools/card-tool-misc.c (send_apdu): New. Move from gpg-card-tool.c
and let it return data. Change all callers.
* tools/gpg-card-tool.c (cmd_writecert): Prepend the certref with the
current application type.
(cmd_yubikey): New.
--
This command allows listing of active applications and to enable or
disable selected applications. This is in particular useful to
disable the OpenPGP application so that the PIV support can easily be
tested.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-misc.c (pubkey_algo_string): Move to ...
* common/sexputil.c (pubkey_algo_string): here.
--
The new gpg format for public key algorithms is useful at other places
as well. Thus we make this new function available. Note that the
code we use in gpg is not based on s-expressions and thus a new
function was required.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_genkey_cb): Make createtime optional.
(scd_genkey_cb): Ditto. Add arg algo.
* tools/gpg-card-tool.c (cmd_generate): Add options and factor card
specific code out to ...
(generate_openpgp, generate_generic): new functions.
--
This patch keeps the interactive OpenPGP mode but adds a pure command
line mode for other cards; in particular PIV cards. What we still
need to do is:
a) Add an interactive mode for PIV cards
b) Add a command line mode for OpenPGP cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c (scd_readkey): New.
* tools/card-tool-misc.c (pubkey_algo_string): New.
* tools/gpg-card-tool.c (list_one_kinfo): Print the algo.
--
It is convenient to see the actual algorithm of keys even if no
certificate has yet been created.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
* tools/card-call-scd.c (scd_change_pin): Change API to use strings.
* tools/gpg-card-tool.c (cmd_passwd): Adjust for change.
(cmd_unblock): Ditto.
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool.h (opt): Add field 'initialized'.
* tools/card-call-scd.c (scd_learn): Set it.
* tools/gpg-card-tool.c (main): Reworked.
(dispatch_command): New.
--
This work is not yet finished because most commands need some tweaks
for non-interactive work. What you already can do are things like:
$ gpg-card-tool list -- 'auth <oldkey' \
-- auth --setkey --raw 123456781234567812345678 -- help auth
Which will list the current card, authenticate using a hex encoded key
from the file "oldkey", set the new admin key to "123...78", and print
help for the auth command. Note that the -- acts as a delimiter
between commands. To use a double dash as argument to a command the
entire command must be quoted.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-keys.c (keyblock_cache): New var.
(release_keyblock): Factor code out to a new do_release_keyblock. Add
a cache.
(flush_keyblock_cache): New.
(get_matching_keys): Use the cache.
* tools/gpg-card-tool.c (cmds): Add command "reset".
(interactive_loop): Implement reset.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-tool-misc.c: New.
* tools/card-tool.h: Rewored data structures for key infos.
* tools/gpg-card-tool.c: Ditto.
* tools/card-call-scd.c: Ditto.
--
Note that this also changes the way the key information is printed.
Formerly we printed it like:
Signature key ....: <openpgp-fingerprint>
created ....: <timestamp>
keygrip ... : <keygrip>
now we do:
Signature key ....: <keygrip>
fingerprint : <openpgp-fingerprint>
created ....: <timestamp>
This is because a keygrip is always available but a fingerprint and
the creation date are properties of an OpenPGP card. A standard way
of listing keys is better than one depending on the type of card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/card-call-scd.c: New.
* tools/card-tool.h: new.
* tools/gpg-card-tool.c: Largely extended.
--
gpg-card-tool will eventually replace the --card-edit command of gpg
because it makes more sense to have a multi-protocol aware tool and
not just one for OpenPGP cards. Most OpenPGP card things works now
but a few, those which require close interaction with gpg, still need
to be implemented. And of course the whole planned non-interactive
stuff needs to be written.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-card-tool.c: New.
* tools/gpg-card-tool-w32info.rc: New.
* tools/Makefile.am: Add new tool.
--
To support more cards than the OpenPGP card it is useful to have a
separate tool. It will have have the "gpg --card-edit" style
interactive interface as well as direct command line options for all
commands. In a first step the OpenPGP card will be supported, to
allow its use as an alternative to the gpg command, and the
forthcoming PIV card support.
The tool can be though as a direct interface to scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks-client.c (encrypt_response): Add arg -z0.
* tools/gpg-wks-server.c (encrypt_stream): Ditto.
--
If for example a server was built without the development packages of
the compression libraries installed, the server will not be able to
decrypt a request. In theory this can't happen due to the preference
system but it is just to easy to create the server's key using a
different version of gpg and then use gpg-wks-server built
differently.
For the short messages we exchange compression is not really required
and thus we better do without to make the system more robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
* dirmngr/dns.c: Include gpgrt.h. Silence -Warray-bounds also gcc.
* tools/gpg-pair-tool.c (command_respond): Init two vars to silence
gcc.
Signed-off-by: Werner Koch <wk@gnupg.org>
