* common/session-env.c (session_env_list_stdenvnames): Extend to allow
return all names as one string.
* agent/command-ssh.c (SSH_REQUEST_EXTENSION): New.
(SSH_RESPONSE_EXTENSION_FAILURE): New.
(request_specs): Add handler for the extension command.
(ssh_handler_extension): New.
--
The extension mechanism is specified in
https://tools.ietf.org/html/draft-miller-ssh-agent-04
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Require at least Libgcrypt 1.9.0. Remove all
GCRYPT_VERSION_NUMBER dependent code.
--
Only Libgcrypt 1.9 implements EAX which is a mandatory algorithm in
RFC4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pkdecrypt.c (agent_pkdecrypt): Support decryption with card
but without a stub key.
--
GnuPG-bug-id: 5170
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (generate_pin): Use STRING random which is
sufficient for a passphrase.
(inq_cb): s/rc/err/. Do not print two errors in case generate_pin
fails. Lowercase strings as per GNU standards.
(setup_genpin): Fix translation test.
(setup_qualitybar): Ditto.
--
Our policy is to use VERY_STRONG for a long term public key but not
for symmetric keys.
The GNU standards to demand that strings start with a lowercase
because that seems to be needed if it follows a prefix of for example
"gpg:". I don't actually like this becuase we need different strings
in interactive and standard mode but the majory of strings in GnuPGare
written this way. If a translation is necessary it can be done with
an en_GB or so locale.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Setup genpin.
(do_getpin): Update with new name for inquire callback.
(inq_quality): Rename to inq_cb and add genpin support.
(inq_cb): Renamed form inq_quality.
(generate_pin): New helper to generate a pin.
(agent_askpin): Fix some typos.
(setup_genpin): Provide new strings for pinentry.
--
This implements the gpg-agent side for generating a pin
especially for symmetric encryption using libgcrypt randomness
and checking it against the gpg-agent constraints.
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.h (split_fields): Use const * for the strings in
the ARRAY.
(split_fields_colon): Likewise.
* common/stringhelp.c (split_fields, split_fields_colon): Fix
the implementation.
* agent/call-scd.c, agent/command.c: Follow the change.
* common/t-stringhelp.c, dirmngr/loadswdb.c: Likewise.
* g10/call-agent.c, tools/card-call-scd.c: Likewise.
* tools/card-yubikey.c, tools/gpg-card.c: Likewise.
* tools/gpg-card.h, tools/gpg-wks-client.c: Likewise.
* tools/gpgconf-comp.c, tools/gpgconf.c: Likewise.
* tools/wks-util.c: Likewise.
--
The strings in the ARRAY don't need to be released by caller, as those
are references. It's easier to follow the code when it's explicitly
const *.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_sethash): Add option --pss and allow for
--hash=null.
* agent/agent.h (struct server_control_s): Add digest.is_pss and
zero where needed.
* agent/pksign.c (agent_pksign_do): Allow for PSS with cards.
* scd/command.c (cmd_pksign): Add for --hash=none.
--
This is not a full implementaion of PSS but allows scdaemon card
drivers to detect already PSS formatted data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (start_pinentry): Don't use pid_t.
--
When pid_t is 64-bit integer and unsigned long is 32-bit,
it never matches, because left hand side does not fill
upper 32-bit.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_get_passphrase): Never repeat in loopback mode;
same as with !OPT_NEWSYMKEY.
--
In loopback mode there shall not be any repeat because the caller is
expected to do any confirmation before passing a new passphrase to
gpg.
Fixes-commit: eace4bbe1ded8b01f9ad52ebc1871f2fd13c3a08
GnuPG-bug-id: 4991
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/genkey.c (agent_ask_new_passphrase): No qualitybar.
* g10/call-agent.c (agent_get_passphrase): Ditto.
* sm/call-agent.c (gpgsm_agent_ask_passphrase): Ditto.
--
The concept of a passphrase quality indicator is anyway questionable
because user are smart enough to trick them out and they also tend to
limit the actually used entropy.
Except for the red/green switching (to show whether constraints are
fulfilled) our qualitybar is pretty bad and thus worse than none.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Add arg pininfo.
* agent/genkey.c (check_passphrase_constraints): New arg no_empty.
* agent/command.c (reenter_passphrase_cmp_cb): New.
(cmd_get_passphrase): Add option --newsymkey.
--
This new option allows to present a passphrase with the usual repeat
box as it is used by gpg-agent's internal key generation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-scd.c: Factor re-usable code out to ...
* agent/call-daemon.c: new. Store infos in an array to allow for
other backend daemons.
* agent/Makefile.am (gpg_agent_SOURCES): Add new file.
* agent/agent.h: Include assuan.h.
(enum daemon_type): New.
(opt): Replace scdaemon_program by daemon_program array. Replace
scd_local by a array d_local. Change users accordingly.
--
The model I'm using for a TPM daemon is the current scdaemon. That
includes start and stop handlers plus liveness checks and an assuan
socket generator. To avoid massive code duplication (and save me a
lot of effort), I've elected to strip this code out of call-scd.c into
a generic framework which can then be reused as is by the TPM handling
daemon.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Co-authored-by: Werner Koch <wk@gnupg.org>
Modified original patch for 2.2 heavily to fit the new framework used
in master (gnupg 2.3)
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For TPM support it is necessary to indroduce another type of shadow
key, so allow other agent functions to extract the type so they can
make the right decisions based on it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Minor editorial changes by wk
* agent/pksign.c (do_encode_eddsa): First argument is NBITs,
so that it can support Ed448, as well as Ed25519.
(agent_pksign_do): Follow the change.
* agent/sexp-secret.c (fixup_when_ecc_private_key): No fix-up needed
for Ed448, it's only for classic curves.
* common/openpgp-oid.c (oidtable): Add Ed448.
* common/sexputil.c (get_pk_algo_from_key): Ed448 is only for EdDSA.
* g10/export.c (match_curve_skey_pk): Ed448 is for EdDSA.
* g10/keygen.c (gen_ecc): Support Ed448 with the name of "ed448".
(ask_algo, parse_key_parameter_part): Handle "ed448".
* g10/pkglue.c (pk_verify): Support Ed448.
(pk_check_secret_key): Support Ed448.
* g10/sign.c (hash_for): Defaults to SHA512 for Ed448.
(make_keysig_packet): Likewise.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/findkey.c (agent_is_eddsa_key): Remove dead case.
--
There is no possibility the call of key_parms_from_sexp returns
"eddsa".
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/cvt-openpgp.c (scan_pgp_format): New with SOS support.
(do_unprotect): Use scan_pgp_format, handle opaque MPI for ECC.
(convert_from_openpgp_main): Use opaque MPI for ECC.
(apply_protection): Set GCRYMPI_FLAG_USER1 flag for encrypted secret.
(extract_private_key): Use "/qd" for ECC, opaque MPI.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (struct server_control_s): Add field digest.data.
* agent/gpg-agent.c (agent_deinit_default_ctrl): Free that field.
* agent/command.c (reset_notify): Ditto.
(start_command_handler): ditto.
(cmd_sethash): Add new option --inquire.
* agent/call-scd.c (agent_card_pksign): For now return an error if
inquire mode was used.
* agent/command-ssh.c (ssh_handler_sign_request): Make sure
digest.data is cleared.
* agent/divert-scd.c (divert_pksign): Implement inquire mode.
* agent/pksign.c (agent_pksign_do): Ditto.
--
This is required to support EdDSA according to RFC8410.
GnuPG-bug-id: 4888
