* g10/gpg.c (build_list): Rewrite to cope with buffer overflow in
certain locales.
--
This fixes an obvious bug in locales where the translated string is
longer than the original. The bug could be exhibited by using
LANG=ru_RU.utf8 gpg -v --version.
En passant we also removed the trailing white space on continued
lines.
Reported-by: Dmitry V. Levin" <ldv at altlinux.org>
(cherry picked from commit e33e74e3a4b2b4a0341f933410ddd5db7a12515e)
Note that this version uses utf8_charcount to get the indentation
mostly right.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Add all the required m4 magic.
--
This also removes the hack to allow custom version numbers which are
not considered a development version. A custom version number can be
done anyway by simply setting the version to it and tag the release
with it.
This is a backport from master including the later patch to use
rev-parse.
* scd/scdaemon.c (opts): Ignore --disable-keypad.
--
The renaming of --disable-keypad to --disable-pinpad might mess up
configuration files managed with a GUI. The GUI does not not anymore
know about the old option and would allow the user to switch
"disable-pinpad" on. However, a "disable-keypad" might still linger
in the conf file with gpgconf not knowing about it. Thus the conf
file would always be rejected and manual intervention would be
required. Ignoring the old option nicely solves the problem.
* jnlib/argparse.h (ARGPARSE_OPT_IGNORE): New.
(ARGPARSE_TYPE_MASK): New, for internal use.
(ARGPARSE_ignore): New.
* jnlib/argparse.c (optfile_parse, arg_parse): Replace remaining
constants by macros.
(optfile_parse): Implement ARGPARSE_OPT_IGNORE.
(arg_parse): Exclide ignore options from --dump-options.
--
In addition to the ignore-invalid-option (commit 8ea49cf5) it is often
useful to mark options in a configuration which as NOP. For example
options which have no more function at all but can be expected to be
found in existing conf files. Such an option (or command) may now be
given as
ARGPARSE_ignore (300, "obsolete-option")
The 300 is merely used as a non-valid single option name much like
group names or the 500+n values used for long options.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (update_reader_status_file): Add condition
ss->status == 0.
--
To reproduce the bug: (1) insert card,
(2) run "gpg2 --card-status",
(3) remove card, (4) invoke "gpg2 --card-edit",
(5) invoke some command like "verify"
The last step fails (but with no error message to user).
* scd/apdu.c (pcsc_dword_t): New. It was named as DWORD (double-word)
when a word was 16-bit.
(struct reader_table_s): Fixes for types.
(struct pcsc_readerstate_s) [__APPLE__]: Enable #pragma pack(1).
Throughout: Fixes for types.
* scd/pcsc-wrapper.c: Likewise.
--
Problem reported for 1.4.x by the issue 1358.
* scd/apdu.c (pcsc_pinpad_verify, pcsc_pinpad_modify): Default value
of maxlen for pinpad input is now 15 (was: 25).
* scd/ccid-driver.c (ccid_transceive_secure): Likewise.
--
For newer PC/SC, it is better to use FEATURE_GET_TLV_PROPERTIES to get
bMaxPINSize.
* scd/ccid-driver.c (ccid_transceive_apdu_level): Support larger
APDU.
--
This is still ad hoc change, but it's OK. Supporting full extended
APDU exchange level is not worth yet.
* keyserver/gpgkeys_hkp.c (get_key): Use curl_easy_setinfo to get the
HTTP status code so we can tell the difference between a successful
retrieval, a partial retrieval, a not-found, or a server failed.
* scd/app-openpgp.c (struct app_local_s): Remove VARLEN.
(parse_login_data): "P=0" means to disable pinpad.
(check_keypad_request): Default is to use pinpad if available.
* scd/ccid-driver.c: Add 2013.
(VENDER_VEGA, VEGA_ALPHA):New.
(ccid_transceive_secure): VEGA_ALPHA is same firmware as GEMPC_PINPAD.
Change bNumberMessage to 0x01, as it works better (was: 0xff).
* scd/iso7816.h (struct pininfo_s): Rename from iso7816_pininfo_s.
Change meaning of MODE.
(pininfo_t): Rename from iso7816_pininfo_t.
* scd/sc-copykeys.c: Include "iso7816.h".
* scd/scdaemon.c, scd/command.c: Likewise.
* scd/ccid-driver.c: Include "scdaemon.h" and "iso7816.h".
(ccid_transceive_secure): Follow the change of PININFO_T.
* scd/app.c: Include "apdu.h" after "iso7816.h".
* scd/iso7816.c (iso7816_check_keypad, iso7816_verify_kp)
(iso7816_change_reference_data_kp): Follow the change of API.
* scd/apdu.c (struct reader_table_s): Change API of CHECK_KEYPAD,
KEYPAD_VERIFY, KEYPAD_MODIFY to have arg of PININFO_T.
(check_pcsc_keypad, check_ccid_keypad): Likewise.
(apdu_check_keypad, apdu_keypad_verify, apdu_keypad_modify): Likewise.
(pcsc_keypad_verify, pcsc_keypad_modify, ct_send_apdu)
(pcsc_send_apdu_direct, pcsc_send_apdu_wrapped, pcsc_send_apdu)
(send_apdu_ccid, ccid_keypad_operation, my_rapdu_send_apdu, send_apdu)
(send_le): Follow the change of API.
* scd/apdu.h (apdu_check_keypad, apdu_keypad_verify)
(apdu_keypad_modify): Change the API.
* scd/app-dinsig.c, scd/app-nks.c, scd/app-openpgp.c: Follow the
change.
* scd/ccid-driver.c (struct ccid_driver_s): Add auto_voltage,
auto_param, and auto_pps.
(parse_ccid_descriptor): Set auto_voltage, auto_param, and auto_pps.
Support non-autoconf readers.
(update_param_by_atr): New.
(ccid_get_atr): Use 5V for PowerOn when auto_voltage is not supported.
Use 0x10 when nonnull_nad for SetParameters.
Call update_param_by_atr for parsing ATR, and use param for
SetParameters.
Send PPS if reader requires it and card is negotiable.
When bNadValue in the return values of SetParameters == 0,
clear handle->nonnull_nad flag.
--
This change is to support more card readers by the internal driver.
Tested with 08e6:3478 Gemplus PinPad Smart Card Reader.
* agent/call-pinentry.c (atfork_cb): Reset signal mask and signal
handler for child process.
(agent_popup_message_stop): Send SIGINT (was: SIGKILL).
--
pinentry-curses should be killed by SIGINT, so that it can reset
terminal settings, but it didn't work.
* g10/keydb.c (KEYDB_RESOURCE_TYPE_KEYBOX): New.
(keydb_add_resource): Handle scheme "gnupg-kbx:". Detect Keybox
magic. Print wanrning note for Keybox.
(keydb_new, keydb_release, keydb_get_resource_name)
(lock_all, unlock_all, keydb_get_keyblock)
(keydb_update_keyblock, keydb_insert_keyblock, keydb_delete_keyblock)
(keydb_locate_writable, keydb_rebuild_caches, keydb_search_reset)
(keydb_search2): Ignore Keybox type in switches.
* g10/gpg.h (G10ERR_UNSUPPORTED): Map to correct gpg-error value.
--
GnuPG 2.1 will support Keybox files in GPG and thus users might see
weird error messages if they accidentally use a keybox file with 2.0.
Better print a note here.
