* scd/apdu.c (pcsc_cancel): New.
(pcsc_init): Load new function.
(connect_pcsc_card): Use it after a removed card error.
--
Well, that was easier than I expected yesterday.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Do not decrement refcount if already
zero. Always release context if or becomes zero.
(apdu_dev_list_start): Unlock prior to close_pcsc_reader. For PC/SC
increment the count. Always release the lock.
(apdu_dev_list_finish): No more unlocking. Use close_pcsc_reader
instead of code duplication.
* scd/apdu.c (pcsc_error_string): Add an error code.
* scd/scdaemon.c (scd_kick_the_loop): Fix a diagnostic.
--
There was an obvious bug in that the pcsc.count could go below zero
and thus there was no chance to get the context release. Releasing
and recreating the context is at least under Windows important to get
rit of the PCSC_E_SERVICE_STOPPED.
Also removes a potential problem in holding the reader_table_lock
between calls to apdu_dev_list_start apdu_dev_list_finish. There is
no need for this. Instead we bump the pcsc.count.
The reader_table_lock strategy should be reviewed; we may be able to
remove it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (cache_pin): Bypass in shared mode.
(verify_chv2: Do not auto verify chv1 in shared mode.
* scd/app-piv.c (cache_pin): By pass caceh in shared mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
* scd/app-p15.c (select_and_read_binary): Allow to skip the select.
(select_and_read_record): Return the statusword. Silence error
message for SW_FILE_STRUCT.
(select_ef_by_path): Fix selection with a home_DF.
(read_first_record): Fallback to read_binary for CardOS and return
info about this.
(read_ef_prkdf): Use info from read_first_record to decide whether to
use record or binary mode.
(read_ef_pukdf): Ditto.
(read_ef_aodf): Ditto.
(read_ef_cdf): Ditto. New arg cdftype for diagnostics.
(read_p15_info): Pass cdftype.
* scd/apdu.h (SW_FILE_STRUCT): New.
* scd/apdu.c (apdu_strerror): Map that one to a string.
* scd/iso7816.c (map_sw): and to a gpg-error.
* scd/apdu.c (apdu_strerror): Add missing status codes.
* scd/command.c (cmd_getinfo): New sub-command apdu_strerror.
--
This is quite handy for gpg-card's APDU command and avoids that we
need to duplicate the mapping table or put it into a shared file.
* scd/apdu.c (apdu_send_direct): Use lock_slot.
--
With trylock_slot, it may return SW_HOST_BUSY. This may occur when
apdu_get_status is called by scd_update_reader_status_file.
Simply using lock_slot is much easier for user of apdu_send_direct.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove is_spr532.
(pcsc_vendor_specific_init): Send the ESC command for SPR532.
(pcsc_pinpad_verify, pcsc_pinpad_modify): Remove no_lc hack.
--
The "no_lc" hack lets PC/SC-lite send the ESC command for SPR532
internally, for pcsc_pinpad_verify. However, PC/SC-lite doesn't do
that for pcsc_pinpad_modify, unfortunately. Besides, I'm not sure
this hack works on Windows, which has different implementation of
PC/SC service.
It's better to send the ESC command by the driver explicitly, at the
initialization. Sending the ESC command results PCSC_E_NOT_TRANSACTED
error when a card is not active (that is the case, usually). We
ignore this error.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
The limit on 4 readers I introduced in 2003 is too low for some of our
use cases. 16 looks better. TODO: Return a useful error message in
gpg-card if the limit has been reached.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (open_ccid_reader): Add arg r_cciderr.
(apdu_open_reader): Print a note on EPERM of the USB device.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--
This change will help to get low level error conditions from hipher
application code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Unlock the reader_table_lock.
(apdu_dev_list_finish): Release the context when no readers.
--
Fixes-commit: 46d185f603
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_open_reader): Skip use of a reader if it's not the
one specified when it is specified.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct pcsc_io_request_s): Use pcsc_dword_t for Windows.
--
This fix is for correctness and for the future when we will support
64-bit Windows.
GnuPG-bug-id: 4454
Suggested-by: Juris Ozols
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (apdu_send_direct): New arg R_SW.
* scd/command.c (cmd_apdu): Ditto.
* scd/iso7816.c (iso7816_apdu_direct): New arg R_SW.
(iso7816_general_authenticate): New.
* scd/app-nks.c (get_chv_status, get_nks_version): Pass NULL for new
arg.
--
iso7816_general_authenticate will be used for the PIV card support.
The new arg to iso7816_apdu_direct and apdu_send_direct allows to get
the raw status word back without the need to handle an output buffer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (struct reader_table_s): Add field of current_state.
(new_reader_slot): Initialize current_state.
(pcsc_get_status): Keep the status in READER_TABLE array.
Return SW_HOST_NO_READER when PCSC_STATE_CHANGED.
* scd/scdaemon.c (handle_connections): Silence a warning.
--
To detect some change of card status, including suspend/resume
possibly, SCardGetStatusChange should be used keeping the
dwCurrentState field.
This change could improve situation for suspend/resume with Yubikey on
Windows. Even not, this is doing the Right Thing.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (open_ccid_reader): Fix error handling of ccid_get_atr.
* scd/app.c (select_application): Always kick the loop if new APP.
* scd/ccid-driver.c (ccid_open_usb_reader): Don't setup at open.
(ccid_slot_status): Setup interrupt transfer when !ON_WIRE.
--
We can use the interrupt transfer to be notified about card status
change. In this case, we don't need to issue PC_to_RDR_GetSlotStatus
command. This change improve the setup the notification; it should be
done after registration of APP.
When the setup is done just after opening the USB connection (before
issuing PC_to_RDR_IccPowerOn), a reader might notifies about no card
availability (because of not yet powered on), even though the card is
ready to be powered on.
GnuPG-bug-id: 3508
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
