* g10/dirmngr-conf.skel: New.
* g10/Makefile.am (EXTRA_DIST): Add file.
(install-data-local, uninstall-local): Install that file.
* g10/openfile.c (copy_options_file): Add arg "name", return a value,
simplify with xstrconcat, and factor warning message out to:
(try_make_homedir): here. Also install dirmngr.conf.
* g10/options.skel: Remove --keyserver entry.
--
The option --keyserver in gpg has been deprecated in favor of
--keyserver in dirmngr.conf. Thus we need to install a skeleton file
for dirmngr to set a default keyserver.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyserver.c (keyserver_refresh): Change return type to
gpg_error_t. Use gpg_dirmngr_ks_list to print the name of the
keyserver to use.
(keyserver_search): Do not print the "no keyserver" error
message. The same error is anyway returned from dirmngr.
* g10/call-dirmngr.c (ks_status_parm_s): Add field "keyword".
(ks_status_cb): Handle other status keywords.
(gpg_dirmngr_ks_list): New.
* tools/gpgconf-comp.c (gc_options_gpg): Deprecate "keyserver".
(gc_options_dirmngr): Add "Keyserver" group and "keyserver".
--
Along with the corresponding dirmngr change this option allows to
configure the keyserver only in dirmngr.conf. Existing
configurations will continue to work. However, GUIs using gpgconf
now the keyserver option under the dirmngr (aka Key Acquirer) tab
unless they are in export mode in which the keyserver option is also
show for gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (print_and_check_one_sig): Add arg "extended" and
print an asterisk for the chosen selfsig.
(check_all_keysigs): Add arg "only_selfsig"
(keyedit_menu) <cmdCHECK>: Add optional arg "selfsig".
--
Using "check selfsig" prints only the self-signatures and indicates
the chosen selfsig with an asterisk.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/sig-check.c (signature_check2): Avoid copying PK to RET_PK.
Instead, directly use the provided storage. If none is provided
allocate some.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/sign.c (do_sign): Let verify signature by gpg-agent.
* agent/pksign.c (agent_pksign_do): Call gcry_pk_verify for RSA.
--
RSA signature verification should be done to prevent attacks against
RSA CRT implementations and not to return invalid signature to
adversary. Newer libgcrypt does so. For older libgcrypt and
smartcards, gpg-agent does signature verification.
* g10/call-dirmngr.c (create_context): Send option and print a verbose
error.
--
It is in general a bad idea to use honor-keyserver-url but if Dirmngr
is running in TOR mode we should not allow this option at all. We let
Dirmngr know about the use of this option and let Dirmngr tell use
whether TOR mode is active so that we can print a hint to disable that
keyserver option.
A future extension in gpgconf may disable that option directly but a
user may still override that and thus we better check.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (search_skipfnc): Fix dummy argument
--
This is required due to the prototype change in
commit 9acbeac236
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (keyedit_menu): When complaining that a user ID or key
must be selected, indicate what command to use to do this.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (merge_selfsigs_main): Stop looking for self-signed
data belonging to the public key when we encounter an attribute packet
or a subkey packet, not just a user id packet. When looking for
self-signed data belonging to a user id packet, stop when we see a
user attribute packet.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (skip_unusable): Also mark the key as unusable if it
has been revoked or has expired.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c: Improve documentation and comments for most
functions. Move documentation for public functions from here...
* g10/keydb.h: ... to here.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (have_secret_key_with_kid): Once we find the relevent
key or subkey, stop searching.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Only a single key or subkey will ever be selected per keyblock.
* g10/getkey.c (lookup): Also don't skip legacy keys if the search
mode is KEYDB_SEARCH_MODE_NEXT.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
We currently don't skip keys if the search mode is
KEYDB_SEARCH_MODE_FIRST. Since we change KEYDB_SEARCH_MODE_FIRST to
KEYDB_SEARCH_MODE_NEXT (to avoid a reset), it only makes sense to have
the same semantics for KEYDB_SEARCH_MODE_NEXT.
* g10/keydb.h (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Update
users.
* g10/getkey.c (get_seckey_byname): Rename from this...
(get_seckey_default): ... to this. Drop the parameter name. Drop the
code which assumed that NAME is not NULL.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_keyblock_byfprint): Remove prototype. Replace use
of this function with get_pubkey_byfprint.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (get_pubkey_byname): If R_KEYBLOCK is not NULL, return
the keyblock in R_KEYBLOCK independent of whether PK is set or not.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Currently, no caller invokes get_pubkey_byname with PK==NULL and
R_KEYBLOCK != NULL. Thus, this change does not change any behavior.
* g10/getkey.c (get_pubkey_byname): Remove function.
(lookup): Replace use of get_pubkey_byname by get_pubkey_byfprint.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.h (get_pubkey_end): Remove declaration. Replace use of
function with getkey_end.
* g10/getkey.c (get_pubkey_byname): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox-search-desc.h (struct keydb_search_desc.skipfnc): Change
third parameter to be the index of the user id packet in the keyblock
rather than the packet itself. Update users.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
The keybox code doesn't work directly with keyblocks. As such, the
matched user packet is not readily available to pass to
DESC[n].SKIPFNC. But, we do know the index of the user id packet that
matched. Thus, pass that instead. If the skip function needs the
user id packet, it can use the key id to look up the key block and
find the appropriate packet.
* g10/getkey.c (struct getkey_ctx_s): Remove field found_key.
(lookup): Add argument ret_found_key. If not NULL, set it to the
found key. Update callers.
(pk_from_block): Add argument found_key. Use it instead of
CTX->FOUND_KEY. Update callers.
(finish_lookup): Return a KBNODE (the found key) instead of an int.
Don't set CTX->FOUND_KEY. Return the found key instead.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/getkey.c (struct getkey_ctx_s): Remove field keyblock.
(finish_lookup): Add parameter keyblock. Update caller to pass this.
(lookup): Add new local variable keyblock. Use this instead of
ctx->keyblock for referencing the keyblock.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/test.c: Include string.h.
(prepend_srcdir): New. Taken from Libgcrypt.
(test_free): New.
* g10/t-keydb.c (do_test): Malloc the filename.
* g10/Makefile.am (AM_CPPFLAGS): Remove -DSOURCE_DIR
(EXTRA_DIST): Add t-keydb-keyring.kbx.
--
Using SOURCE_DIR should in general work but we have seen problems when
doing this in Libgcrypt. Using the srcdir variable gives us anyway
more flexibility and aligns with the way we do it in tests/openpgp.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/test.c: Include stdio.h and stdlib.h.
(verbose): New.
(print_results): Rename to exit_tests.
(main): Remove atexit and call exit_tests. Set verbose.
(ASSERT, ABORT): Call exit_tests instead of exit.
--
Calling exit from an exit handler is undefined behaviour. It works on
Linux but other systems will hit an endless loop. That is indeed
unfortunate but we can't do anything about it. Calling _exit() would
be possible but that may lead to other problems. Thus we change to
call a custom exit function :-(.
Using "make check verbose=1" is supported by tests/openpgp and thus
we add the same mechanism here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keyblock_cache): Don't declare this variable. Instead...
(struct keyblock_cache): ... turn its type into this first class
object...
(struct keydb_handle): ... and instantiate it once per database
handle. Update all users.
(keydb_rebuild_caches): Don't invalidate the keyblock cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_get_keyblock): If the iobuf_seek fails when
reading from the cache, then simply clear the cache and try reading
from the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/gpg.c (opts): Remove --no-sig-create-check.
* g10/options.h (struct opt): Remove field no_sig_create_check.
* g10/sign.c (do_sign): Always check unless it is RSA and we are using
Libgcrypt 1.7.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_new): If we fail to open a keyring or keybox
correctly release all resources.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c: Improve code comments and documentation of internal
interfaces. Improve documentation of public APIs and move that to...
* g10/keydb.h: ... this file.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (struct keydb_handle): Add new field is_reset.
(keydb_new): Initialize hd->is_reset to 1.
(keydb_locate_writable): Set hd->is_reset to 1.
(keydb_search): Set hd->is_reset to 0. Don't cache a key not found if
the search started from the beginning of the database.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/keydb.c (keydb_search_first): Reset the handle before starting
the search.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
This bug hasn't shown up yet in practice, because keydb_search_first
is always called immediately after a keydb_new. This changes cleans
up the semantics and will hopefully prevent future bugs.
* g10/keydb.c (struct kid_list_s): Rename from this...
(struct kid_not_found_cache_bucket): ... to this. Update users.
Remove field state.
(kid_list_t): Remove type.
(KID_NOT_FOUND_CACHE_BUCKETS): Define. Use this instead of a literal.
(kid_found_table): Rename from this...
(kid_not_found_cache_bucket): ... to this. Update users.
(kid_found_table_count): Rename from this...
(kid_not_found_cache_count): ... to this. Update users.
(kid_not_found_p): Only return whether a key with the specified key id
is definitely not in the database.
(kid_not_found_insert): Remove parameter found. Update callers.
(keydb_search): Only insert a key id in the not found cache if it is
not found. Rename local variable once_found to already_in_cache.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Commit e0873a33 started tracking whether key ids where definitely in
the database. This information is, however, never used and thus just
unnecessarily inflates the cache. This patch effectively reverts that
change (however, e0873a33 contains two separate changes and this only
reverts that change).
* g10/keyedit.c (sign_uids): Write an ERROR status for a signing
failure.
(menu_adduid, menu_addrevoker, menu_revsig): Ditto.
(menu_revuid, menu_revkey, menu_revsubkey): Ditto.
--
This change helps GPA to show better error messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (STATUS_FAILURE): New.
* g10/cpr.c (write_status_failure): New.
* g10/gpg.c (main): Call write_status_failure for all commands which
print an error message here.
* g10/call-agent.c (start_agent): Print an STATUS_ERROR if we can't
set the pinentry mode.
--
This status line can be used similar to the error code returned by
commands send over the Assuan interface in gpgsm. We don't emit them
in gpgsm because there we already have that Assuan interface to return
proper error code. This change helps GPGME to return better error
codes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Use an int to compare to -1. Use
buf32_to_ulong.
--
Regression-due-to: 0add91ae1c
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/packet.h (PKT_signature): Change revkey's type from a struct
revocation_key ** to a struct revocation_key *. Update users.
--
revkey was a pointer into the raw data. But, C doesn't guarantee that
there is no padding. Thus, we copy the data.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse): We don't handle copying packets with a
partial body length to an output stream. If this occurs, log an error
and abort.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (dbg_copy_all_packets): Check that OUT is not
NULL.
(copy_all_packets): Likewise.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (parse_signature): Make sure PKTLEN doesn't
underflow. Be more careful that a read doesn't read more data than
PKTLEN says is available.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h: Add documentation for functions defined in
parse-packet.c.
* g10/parse-packet.c: Improve comments for many functions.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/packet.h (enum_sig_subpkt): Remove argument RET_N. Update
callers.
* g10/parse-packet.c (enum_sig_subpkt): Remove argument RET_N.
--
Remove the RET_N argument, because it is unused and because it is
meaningless: it's not clear whether it is an offset into SIG->HASHED
or SIG->UNHASHED.
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* g10/parse-packet.c (mpi_read): Improve documentation. Correctly
handle an EOF. On overflow, correctly return the number of bytes read
from the pipeline.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* common/iobuf.h (iobuf_open_fd_or_name): Remove prototype. Replace
use with either iobuf_open or iobuf_fdopen_nc, as appropriate.
* common/iobuf.c (iobuf_open): Remove function.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
* kbx/keybox.h (KEYBOX_WITH_X509): Do not define.
* sm/Makefile.am (AM_CPPFLAGS): Define it here.
(common_libs): Change to libkeybox509.a
* g10/Makefile.am (AM_CFLAGS): remove KSBA_CFLAGS.
(gpg2_LDADD, gpgv2_LDADD): Remove KSBA_LIBS
* kbx/Makefile.am (noinst_LIBRARIES): Add libkeybox509.a.
(libkeybox509_a_SOURCES): New.
(libkeybox_a_CFLAGS): New.
(libkeybox509_a_CFLAGS): New.
(kbxutil_CFLAGS): New.
* kbx/keybox-search.c (has_keygrip) [!KEYBOX_WITH_X509]: Declare args
as unused.
--
There is no real need to link to Libksba in gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/status.h (INQUIRE_MAXLEN): New.
* g10/call-agent.c (default_inquire_cb): Send STATUS_INQUIRE_MAXLEN.
client when inquiring a passphrase over pinentry-loopback.
--
This is to inform a user about the maximum length of a passphrase. The
limit is the same that gpg-agent uses.
* g10/gpg.c (main): test for --command-fd during --gen-key parse.
When --command-fd is set then imply --batch to let gpg inquire a
passphrase rather than requiring a pinentry.
* g10/keydb.h (KEYDB_RESOURCE_FLAG_GPGVDEF): New.
* g10/keydb.c (keydb_add_resource): Take care of new flag.
* g10/gpgv.c (main): Use new flag.
--
GnuPG-bug-id: 2025
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_print): Do not print extra curve name.
--
This was cruft from the time before we changed to the new algo/size
string.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (list_keyblock_print): Change UID line indentation
* g10/mainproc.c (list_node): Ditto.
--
Due to the new keyalgo/size format the UID was not anymore printed
properly aligned to the creation date. Although we can't do that in
any case, this change does it for common algos like "rsa2048",
"dsa2048", and "ed25519".
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cvt-openpgp.c (get_keygrip): Handle Curve25519.
(convert_secret_key, convert_transfer_key): Ditto.
* common/openpgp-oid.c (oidtable): Add Curve25519.
(oid_crv25519, openpgp_oid_is_crv25519): New.
* common/util.h (openpgp_oid_is_crv25519): New.
* g10/ecdh.c (pk_ecdh_encrypt_with_shared_point): Handle the case
with Montgomery curve which uses x-only coordinate.
* g10/keygen.c (gen_ecc): Handle Curve25519.
(ask_curve): Change the API and second arg is to return subkey algo.
(generate_keypair, generate_subkeypair): Follow chage of ask_curve.
* g10/keyid.c (keygrip_from_pk): Handle Curve25519.
* g10/pkglue.c (pk_encrypt): Handle Curve25519.
* g10/pubkey-enc.c (get_it): Handle the case with Montgomery curve.
* scd/app-openpgp.c (ECC_FLAG_DJB_TWEAK): New.
(send_key_attr): Work with general ECC, Ed25519, and Curve25519.
(get_public_key): Likewise.
(ecc_writekey): Handle flag_djb_tweak.
--
When libgcrypt has Curve25519, GnuPG now supports Curve25519.
* common/openpgp-oid.c (openpgp_oid_to_curve): Add CANON argument.
* common/util.h: Update.
* g10/import.c (transfer_secret_keys): Follow the change.
* g10/keyid.c (pubkey_string): Likewise.
* g10/keylist.c (list_keyblock_print, list_keyblock_colon): Likewise.
* parse-packet.c (parse_key): Likewise.
* scd/app-openpgp.c (send_key_attr, get_public_key): Likewise.
--
Change the function so that caller can select canonical name of curve
or name for printing. Suggested by wk.
* g10/keydb.c (keydb_search_fpr): Skip legacy keys.
--
A test case for this problem can be found at
GnuPG-bug-id: 2031
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/getkey.c (lookup): Map GPG_ERR_LEGACY_KEY.
--
If an expired key is directly followed by a legacy key in the keyring,
the lookup function incorrectly returned "legacy key" instead of
"unusable key". We fix it by handling not found identical to a legacy
key if the last finish lookup failed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (sign_uids): Add arg "ctrl".
(show_key_with_all_names_colon): Ditto.
(show_key_with_all_names): Ditto.
* g10/keyedit.c (show_key_with_all_names): Print key record
indicators by checking with gpg-agent.
(show_key_with_all_names): Ditto. May now also print sec/sbb.
--
This also fixes a problem in the --with-colons mode. Before this
patch the --with-colons output of --edit-key always showed pub/sub
regardless of the old toogle state. Now it also prints sec/sbb.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keyedit.c (cmds): Remove helptext from "toggle".
(keyedit_menu): Remove "toggle" var and remove the sub/pub check
against toggle.
--
Because it is now easily possible to have only secret keys for some of
the main/subkeys the current check on whether any secret is available
is not really useful. A finer grained check should eventually be
implemented.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Provide replacement for GPGRT_ATTR_ macros when using
libgpg-error < 1.20.
* common/mischelp.h: Ditto.
* common/types.h: Ditto.
--
Given that libgpg-error is a dependency of all GnuPG related libraries
it is better to define such macros at only one place instead of having
similar macros at a lot of places. For now we need repalcement
macros, though.
* g10/call-agent.h (struct agent_card_info_s): Add curve field.
* g10/call-agent.c (learn_status_cb): Use curve name.
* g10/card-util.c (card_status): Show pubkey name.
* scd/app-openpgp.c (struct app_local_s): Record OID and flags.
(store_fpr): Use ALGO instead of key type.
(send_key_attr): Use curve name instead of OID.
(get_public_key): Clean up by OID to curve name.
(ecc_writekey): Support any curves in libgcrypt.
(do_genkey, do_auth, ): Follow the change.
(ecc_oid): New.
(parse_algorithm_attribute): Show OID here.
* g10/card-util.c (do_change_keysize): Put "rsa".
* scd/app-openpgp.c (change_keyattr, change_keyattr_from_string):
Change the command format.
(rsa_writekey): Check key type.
(do_writekey): Remove "ecdh" and "ecdsa" support which was available
in experimental libgcrypt before 1.6.0.
* g10/getkey.c (free_akl): If AKL is NULL, just return.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>.
Reported-by: Sami Farin.
GnuPG-bug-id: 2045
* agent/gpg-agent.c (create_server_socket): Add arg "cygwin". Call
assuan_sock_set_flag if Assuan version is recent enough.
(main): Create ssh server socket with Cygwin flag set.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/parse-packet.c (parse): Make the description more accurate when
listing packets: old format packets don't support partial lengths,
only indeterminate lengths (RFC 4880, Section 4.2).
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.c (opts): Change arg for oDebug to a string.
(debug_flags): New; factored out from set_debug.
(set_debug): Remove "--debug-level help". Use parse_debug_flag to
print the used flags.
(main): Use parse_debug_flag for oDebug.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_s): Keep a state in the table.
(kid_not_found_table): Rename to kid_found_table.
(n_kid_not_found_table): Rename to kid_found_table_count.
(kid_not_found_p): Return found state.
(kid_not_found_insert): Add arg found.
(keydb_search): Store found state in the table.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keylist.c (keylist_context): Add field good_sigs.
(list_keyblock_print): Updated good_sigs.
(print_signature_stats): Print number of good signatures and use
log_info instead of tty_printf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (kid_list_t): New.
(kid_not_found_table, n_kid_not_found_table): New.
(kid_not_found_p, kid_not_found_insert, kid_not_found_flush): New.
(keydb_insert_keyblock): Flush the new cache.
(keydb_delete_keyblock): Ditto.
(keydb_update_keyblock): Ditto.
(keydb_search): Use the new cache.
(keydb_dump_stats): New.
* g10/gpg.c (g10_exit): Dump keydb stats.
--
What we do here is to keep track of key searches by long keyids (as
stored in all signatures) so that we do not need to scan the keybox
again after we already found that this keyid will result in
not-found. As soon as we change gpg to run as a co-process we should
store this table per session because other instances of gpg may have
updated the keybox without us knowing.
On a test ring with
gpg: 94721 good signatures
gpg: 6831 bad signatures
gpg: 150703 signatures not checked due to missing keys
gpg: 5 signatures not checked due to errors
gpg: keydb: kid_not_found_table: total: 14132
this new cache speeds a --check-sigs listing up from 28 minutes to
less than 3 minutes.
Signed-off-by: Werner Koch <wk@gnupg.org>
