* common/t-sexputil.c (test_ecc_uncompress): Ignore unknwon curve
errors.
--
For unknown reasons some versions of Fedora or RHEL provide a patched
version of Libgcrypt with Brainpool support removed. We better ignore
this error because it is a regression in 2.2.28 although that older
versions could not used Brainpool keys.
GnuPG-bug-id: 5502
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/ttyio.c (w32_write_console): Fallback to WriteConsoleA on
error.
--
To test this switch the Windows Console to "legacy mode"
set LANG=de
gpg --card-edit
and enter an invalid command. The response contains an Umlaut and old
Windows versions (and the legacy console) don't have a proper font
installed for this. Without this patch this runs into a log_fatal
error.
The mitigation we implement is to fallback to WriteConsoleA, that is
accepting wrong encoding and to print a note about the problem.
GnuPG-bug-id: 5491
* common/keyserver.h: Remove.
* sm/gpgsm.h (struct keyserver_spec): Remove.
(opt): Change keyserver to a strlist_t.
* sm/gpgsm.c (keyserver_list_free): Remove.
(parse_keyserver_line): Remove.
(main): Store keyserver in an strlist.
* sm/call-dirmngr.c (prepare_dirmngr): Adjust for the strlist. Avoid
an ambiguity in dirmngr by adding a prefix if needed.
* g10/options.h (struct keyserver_spec): Move definition from
keyserver.h to here. Remove most fields.
* g10/keyserver.c (free_keyserver_spec): Adjust.
(cmp_keyserver_spec): Adjust.
(parse_keyserver_uri): Simplify.
(keyidlist): Remove fakev3 arg which does not make any sense because
we don't even support v3 keys.
--
We now rely on the dirmngr to parse the keyserver specs. Thus a bad
specification will not be caught immediately. However, even before
that dirmngr had stricter tests.
Signed-off-by: Werner Koch <wk@gnupg.org>
Ported-from: 9f586700ec4ceac97fd47cd799878a8847342ffa
* common/compliance.c (gnupg_cipher_is_allowed): Allow GCM for gpgsm
in decrypt mode.
* tests/cms/samplemsgs/pwri-sample.gcm.p7m: Remove duplicated authtag
--
We allow GCM in de-vs mode for decryption although this has not been
evaluation. It is decryption and thus no serious harm may happen.
* g10/openfile.c (overwrite_filep): Use gnupg_access.
--
As said, this is just an obvious but partial fix. We need to review
things for the output module.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_genkey): Use goto instead of return.
* agent/cvt-openpgp.c (convert_from_openpgp_main): Ditto.
* agent/genkey.c (agent_ask_new_passphrase): Fix typo to free correct
pointer
(agent_genkey): Release memory
* agent/gpg-agent.c (check_own_socket): Free sockname
* agent/protect-tool.c (read_key): Free buf.
(agent_askpin): Free passphrase
--
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Changed original patch to not add a free before a GPG_ERR_BUG.
Signed-off-by: Werner Koch <wk@gnupg.org>
GnuPG-bug-id: 5393
* common/comopt.c, common/comopt.h: New.
* common/Makefile.am: Add them.
* g10/gpg.c: Include comopt.h.
(main): Also parse common.conf.
* sm/gpgsm.c: Include comopt.h.
(main): Set a flag for the --no-logfile option. Parse common.conf.
* tools/gpgconf-comp.c (known_options_gpg): Remove "use-keyboxd", add
pseudo option "use_keyboxd".
(known_pseudo_options_gpg): Add pseudo option "use_keyboxd".
(known_options_gpgsm): Remove "use-keyboxd".
* tests/openpgp/defs.scm (create-gpghome): Create common.conf.
* doc/examples/common.conf: New.
--
Note that --use-keybox still works but prints a warning. We will
eventually remove this option becuase it was marked as an experimental
feature anyway.
It would be too confusing if gpg and gpgsm use different key storages.
Further, other components (e.g. dirmngr or gpg-wks-client) which call
gpg or gpgsm need to be aware that the keyboxd is used and pass that
option on the command line. Now that common.conf is always read (even
if --no-options is used) those tools will work instantly.
* common/openpgp-fpr.c: New.
* common/Makefile.am (common_sources): Add it.
--
This function is targeted to handle keys on smartcards.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/compliance.c (get_compliance_cache): New.
(gnupg_rng_is_compliant): Use per mode cache.
(gnupg_gcrypt_is_compliant): Ditto.
--
This addresses the problem tha the check might be called with
different compliance values and thus it should return the
corresponding cached result.
Signed-off-by: Werner Koch <wk@gnupg.org>
common/openpgp-oid.c (oidtable): Ed448 uses 456-bit signature.
--
While the curve itself is 448-bit, the signature size is 456-bit.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tpm2d: New directory.
* Makefile.am (SUBDIRS): Add directory.
* configure.ac: Detect libtss and decide whether to build tpm2d.
* am/cmacros.am: Add a define.
* util.h (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* common/homedir.c (gnupg_module_name): Add tpm2d.
* common/mapstrings.c (macros): Add "TPM2DAEMON".
* tools/gpgconf.h (GC_COMPONENT_TPM2DAEMON): New.
* tools/gpgconf-comp.c (known_options_tpm2daemon): New.
(gc_component): Add TPM2.
(tpm2daemon_runtime_change): New.
* tpm2d/Makefile.am: New.
* tpm2d/command.c: New.
* tpm2d/ibm-tss.h: New.
* tpm2d/tpm2.c: New.
* tpm2d/tpm2.h: New.
* tpm2d/tpm2daemon.c: New.
* tpm2d/tpm2daemon.h: New.
---
This commit adds and plumbs in a tpm2daemon to the build to mirror the
operation of scdaemon. The architecture of the code is that
tpm2daemon.c itself is pretty much a clone of scd/scdaemon.c just with
updated function prefixes (this argues there could be some further
consolidation of the daemon handling code). Note that although this
commit causes the daemon to be built and installed, nothing actually
starts it or uses it yet.
Command handling
----------------
command.c is copied from the command handler in scd.c except that the
command implementation is now done in terms of tpm2 commands and the
wire protocol is far simpler. The tpm2daemon only responds to 4
commands
IMPORT: import a standard s-expression private key and export it to
TPM2 format. This conversion cannot be undone and the
private key now can *only* be used by the TPM2. To anyone
who gets hold of the private key now, it's just an
encrypted binary blob.
PKSIGN: create a signature from the tpm2 key. The TPM2 form private
key is retrieved by KEYDATA and the hash to be signed by
EXTRA. Note there is no hash specifier because the tpm2
tss deduces the hash type from the length of the EXTRA
data. This is actually a limitation of the tpm2 command
API and it will be interesting to see how this fares if the
tpm2 ever supports say sha3-256 hashes.
PKDECRYPT: decrypt (RSA case) or derive (ECC case) a symmetric key.
The tpm2 for private key is retrieved by KEYDATA and the
information used to create the symmetric key by EXTRA.
KILLTPM2D: stop the daemon
All the tpm2 primitives used by command.c are in tpm2.h and all the
tpm2 specific gunk is confined to tpm2.c, which is the only piece of
this that actually does calls into the tss library.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Changes from James' patch:
- gpgconf: The displayed name is "TPM" and not "TPM2". That
string is used by GUIs and should be something the user
understands. For example we also use "network" instead
of "Dirmngr".
- Removed some commented includes.
- Use 16 as emulation of GPG_ERR_SOURCE_TPM2.
- Silenced a C90 compiler warning and flags unused parameters.
- Removed "if HAVE_LIBS" from tpm2/Makefile.am and add missing
files so that make distcheck works.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exechelp-w32.c (gnupg_spawn_process): Change to use
CreateProcessW.
(gnupg_spawn_process_fd): Ditto.
(gnupg_spawn_process_detached): Ditto.
* g10/exec.c (w32_system): Ditto.
--
GnuPG-bug-id: 4398
We do not use this weirdo CREATE_UNICODE_ENVIRONMENT flag because it
does not make any sense to have non-ASCII names in the environment. I
can't imagine why this should be used at all and rationale for this
API features is, well, sparse.
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* common/ttyio.c (do_get) [W32]: Use ReadConsoleW.
(w32_write_console): New.
(tty_printf, tty_fprintf) [W32]: Use new function.
--
Note that due this change fixed stings (i.e. gettext translations)
printed to the console will not be rendered correctly unless "chcp
65001" has been used. This needs to be fixed by followup patch.
GnuPG-bug-id: 4365
* common/w32-misc.c [W32]: Include windows.h
(struct add_arg_s): New.
(add_arg): New.
(glob_arg): New.
(parse_cmdstring): Add arg argvflags and set it.
(w32_parse_commandline): Add arg r_itemsalloced. Add globing.
* common/init.c (prepare_w32_commandline): Mark glob created items as
leaked.
* common/t-w32-cmdline.c : Include windows.h
(test_all): Add simple glob test for Unix.
(main): Add manual test mode for Windows.
--
GnuPG-bug-id: 4398
* common/t-w32-cmdline.c (test_all): Add new test cases.
* common/w32-misc.c (strip_one_arg): Add arg endquote.
(parse_cmdstring): Take care of backslashes in quotes.
--
I found some new test vectors from Microsoft.
* common/w32-misc.c: New.
* common/t-w32-cmdline.c: New.
* common/init.c: Include w32help.h.
(prepare_w32_commandline): New.
(_init_common_subsystems) [W32]: Call prepare_w32_commandline.
* common/Makefile.am (common_sources) [W32]: Add w32-misc.c
(module_tests): Add t-w32-cmdline
(t_w32_cmdline_LDADD): New.
--
The rules for the command line parser are not cleary specified - if at
all. See the comment in t-w32-cmdline.c.
We can't use the mingw version because that would require to change
all argv handling to be wchar_t and that only for Windows. That would
be too ugly. Parsing the command line into argv by us is much easier
and we can do that only if needed - i.e. if globing is required (we
are prepared for this) or a non-ASCII character has been encountered.
This way we keep things stable and only fix the currently not working
Unicode problem.
GnuPG-bug-id: 4398
* configure.ac (NEED_GPG_ERROR_VERSION): Rename to NEED_GPGRT_VERSION
and set to 1.41.
* common/sysutils.c (gnupg_access): Remove code for older gpgrt
versions.
* kbx/backend-sqlite.c: Ditto.
* sm/gpgsm.c (main): Ditto.
--
We already have a requirement for a newer Libgcrypt and thus we can
also require a more recent libgpgrt (aka libgpg-error) which was
released before Libgcrypt.
* common/compliance.c (gnupg_gcrypt_is_compliant): New.
(gnupg_rng_is_compliant): Also check library version.
* g10/mainproc.c (proc_encrypted): Use new function.
(check_sig_and_print): Ditto.
* sm/decrypt.c (gpgsm_decrypt): Ditto.
* sm/encrypt.c (gpgsm_encrypt): Ditto.
* sm/verify.c (gpgsm_verify): Ditto
--
This will eventually allow us to declare Libgcrypt 1.9 to be de-vs
compliant. GnuPG can use this information then for its own checks.
As of now GnuPG tests the version of the used library but that is a
bit cumbersome to maintain.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/session-env.c (session_env_list_stdenvnames): Extend to allow
return all names as one string.
* agent/command-ssh.c (SSH_REQUEST_EXTENSION): New.
(SSH_RESPONSE_EXTENSION_FAILURE): New.
(request_specs): Add handler for the extension command.
(ssh_handler_extension): New.
--
The extension mechanism is specified in
https://tools.ietf.org/html/draft-miller-ssh-agent-04
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Require at least Libgcrypt 1.9.0. Remove all
GCRYPT_VERSION_NUMBER dependent code.
--
Only Libgcrypt 1.9 implements EAX which is a mandatory algorithm in
RFC4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (map_w32_to_errno): New.
(gnupg_w32_set_errno): New.
(gnupg_remove) [w32]: Set ERRNO
--
To support Unicode gnupg_remove was changed to use DeleteFileW and not
properly tested because the code was alreadt used in Windows CE.
However, ERRNO was not set and thus Dirmngr failed due to
if (!gnupg_remove (fname))
log_info (_("removed stale te[...] file '%s'\n"), fname);
else if (errno != ENOENT)
{
err = gpg_error_from_syserror ();
log_error (_("problem remov[...] file '%s': %s\n"),
fname, gpg_strerror (err));
goto leave;
}
GnuPG-bug-id: 5230
* common/dotlock.c (dotlock_create_unix): Remove debug output.
--
This was left over from developement about 10 years ago. Exhibits
itself when using sshfs.
GnuPG-bug-id: 5193
* acinclude.m4 (GNUPG_CHECK_ENDIAN): Use AC_COMPILE_IFELSE instead of
AC_TRY_COMPILE. Use AC_RUN_IFELSE instead of AC_TRY_RUN.
(GNUPG_BUILD_PROGRAM): Use AS_HELP_STRING instead of AC_HELP_STRING.
* configure.ac: Use AC_USE_SYSTEM_EXTENSIONS instead of AC_GNU_SOURCE.
Use AS_HELP_STRING instead of AC_HELP_STRING.
(AC_ISC_POSIX): Replace by AC_SEARCH_LIBS.
(AC_TYPE_SIGNAL): Remove.
* m4/isc-posix.m4: Remove.
* m4/codeset.m4: Update from gnulib.
* m4/gettext.m4: Update from gnulib.
* m4/lcmessage.m4: Update from gnulib.
* m4/socklen.m4: Update from gnulib.
* m4/ldap.m4: Use AS_HELP_STRING instead of AC_HELP_STRING.
Use AC_LINK_IFELSE instead of AC_TRY_LINK.
Use AC_RUN_IFELSE instead of AC_TRY_RUN.
* m4/gpg-error.m4: Update from libgpg-error.
* m4/readline.m4: Update from libgpg-error.
* m4/npth.m4: Update from npth.
* m4/libassuan.m4: Update from libassuan.
* m4/libgcrypt.m4: Update from libgcrypt.
* m4/ksba.m4: Update from libksba.
* m4/ntbtls.m4: Update from ntbtls.
* common/signal.c [!HAVE_DOSISH_SYSTEM] (init_one_signal): Replace
RETSIGTYPE to void.
[!HAVE_DOSISH_SYSTEM] (got_fatal_signal, got_usr_signal): Likewise.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/status.h (STATUS_CANCELED_BY_USER): New.
* g10/passphrase.c (passphrase_to_dek): Send STATUS_CANCELED_BY_USER
instead of STATUS_MISSING_PASSPHRASE when canceled is set.
--
This is to prevent further pinentry tries when the pinentry is canceled
by the user during symmetric decryption.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* g10/openfile.c (try_make_homedir): Move core of the code to ...
* common/homedir.c (gnupg_maybe_make_homedir): new.
* sm/keydb.c (try_make_homedir): Implement using new function.
* common/homedir.c: Include i18n.h.
* po/POTFILES.in: Add common/homedir.c.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (get_default_pinentry_name): Try ../bin/pinentry.exe
--
In an installation layout where GnuPG is installed as a component
of another software it might be useful to have pinentry placed
in a different bin directory without the forced folder name of
Gpg4win.
(cherry picked from commit b4cb91d5fbe2b8917d76d12eb72aaac0d97ed596)
* common/gettime.c: Include locale.h.
(asctimestamp): Increase buffer. On Windows use setlocale.
--
GnuPG-bug-id: 5073
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (any8bitchar) [W32]: New.
(gnupg_open): New. Replace most calls to open by this.
* common/iobuf.c (any8bitchar) [W32]: New.
(direct_open) [W32]: Use CreateFileW if needed.
--
This is yet another step for full Unicode support on Windows.
GnuPG-bug-id: 5098
* common/dotlock.c (any8bitchar) [W32]: New.
(dotlock_create_w32): Use strconcat and CreateFileW.
* common/t-dotlock.c: Source include dotlock.c and modify to allow
manual testing on Windows.
--
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
* common/asshelp.c (lock_spawning): Use a dedicated name for keyboxd.
* common/homedir.c (keyboxd_socket_name): New.
(gnupg_module_name): Put keyboxd into libexecdir.
* tools/gpgconf-comp.c (known_options_keyboxd): New.
(gc_component): Add entry for keyboxd.
(keyboxd_runtime_change): New.
(gc_component_launch): Support keyboxd.
* tools/gpgconf.c (list_dirs): Emit new item keyboxd-socket.
(main): Also remove keyboxd socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.h (split_fields): Use const * for the strings in
the ARRAY.
(split_fields_colon): Likewise.
* common/stringhelp.c (split_fields, split_fields_colon): Fix
the implementation.
* agent/call-scd.c, agent/command.c: Follow the change.
* common/t-stringhelp.c, dirmngr/loadswdb.c: Likewise.
* g10/call-agent.c, tools/card-call-scd.c: Likewise.
* tools/card-yubikey.c, tools/gpg-card.c: Likewise.
* tools/gpg-card.h, tools/gpg-wks-client.c: Likewise.
* tools/gpgconf-comp.c, tools/gpgconf.c: Likewise.
* tools/wks-util.c: Likewise.
--
The strings in the ARRAY don't need to be released by caller, as those
are references. It's easier to follow the code when it's explicitly
const *.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/sexputil.c (cmp_canon_sexp): New.
(cmp_canon_sexp_def_tcmp): New.
* common/t-sexputil.c (test_cmp_canon_sexp): Add a simple test.
--
To be used to fix
GnuPG-bug-id: 5061
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/exechelp-posix.c (gnupg_close_pipe): New.
* common/exechelp-w32.c (gnupg_close_pipe): New.
--
This function is mainly for documentation purposes and should be used
along with gnupg_create_pipe.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/utf8conv.c (get_w32_codepage): New.
(wchar_to_native): Use instead oc CP_ACP.
(native_to_wchar): Ditto.
--
This should fix quite some issue; we fixed it when using the iconv
based machinery about 14 years ago. At some point we introduced the
new conversion functions because Windows started to support UTF-8
natively. The fix comes late but well, it is done.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.c (w32_strerror): Strip trailing CR,LF.
* common/iobuf.c (iobuf_get_filelength): Use -1 and not 0 for the
arg to w32_strerror.
--
This is in particular annoying since we started to use a string
argument sanitizer in the logging code. Before that we just add an
extra blank line.
The second patch corrects a never yet seen error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgtar-create.c (gpgtar_create): Add args files_from and
null_names. Improve reading from a file.
* tools/gpgtar.c: Make global vars static.
(main): Remove tests for --files-from and --null option combinations.
Pass option variables to gpgtar_create.
--
GnuPG-bug-id: 5027
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (map_openpgp_pk_to_gcry): Use cast for enum
conversion.
* dirmngr/dns-stuff.c (get_dns_srv): Use explicit conversion from
int to float.
* sm/gpgsm.c (parse_keyserver_line): Initialize ERR.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
In the experiment for 4994, and patches were wrongly applied.
Fixes-commit: 46d185f60397f68830bfdfb99627b29aea5016f1
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/compliance.h (PK_ALGO_FLAG_RSAPSS): New.
* common/compliance.c (gnupg_pk_is_compliant): Add arg alog_flags and
test rsaPSS. Adjust all callers.
(gnupg_pk_is_allowed): Ditto.
* sm/misc.c (gpgsm_ksba_cms_get_sig_val): New wrapper function.
(gpgsm_get_hash_algo_from_sigval): New.
* sm/certcheck.c (gpgsm_check_cms_signature): Change type of sigval
arg. Add arg pkalgoflags. Use the PK_ALGO_FLAG_RSAPSS.
* sm/verify.c (gpgsm_verify): Use the new wrapper and new fucntion to
also get the algo flags. Pass algo flags along.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gpgrlhelp.c (read_write_history): New.
(gnupg_rl_initialize): Register new function.
* common/ttyio.c (my_rl_rw_history): New var.
(tty_private_set_rl_hooks): Add arg read_write_history.
(tty_read_history): New.
(tty_write_history): New.
* tools/gpg-card.c (HISTORYNAME): New.
(oNoHistory): New enum value.
(opts): New option --no-history.
(cmd_history): New.
(cmds): New command "history".
(interactive_loop): Read and save the history.
* tools/gpg-connect-agent.c (HISTORYNAME): New.
(opts): New option --no-history.
(main): Read and save the history. New command /history.
--
Yeah, finally we have stored history; I should have added this much
earlier.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (do_encode_eddsa): First argument is NBITs,
so that it can support Ed448, as well as Ed25519.
(agent_pksign_do): Follow the change.
* agent/sexp-secret.c (fixup_when_ecc_private_key): No fix-up needed
for Ed448, it's only for classic curves.
* common/openpgp-oid.c (oidtable): Add Ed448.
* common/sexputil.c (get_pk_algo_from_key): Ed448 is only for EdDSA.
* g10/export.c (match_curve_skey_pk): Ed448 is for EdDSA.
* g10/keygen.c (gen_ecc): Support Ed448 with the name of "ed448".
(ask_algo, parse_key_parameter_part): Handle "ed448".
* g10/pkglue.c (pk_verify): Support Ed448.
(pk_check_secret_key): Support Ed448.
* g10/sign.c (hash_for): Defaults to SHA512 for Ed448.
(make_keysig_packet): Likewise.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/sexputil.c (cipher_mode_to_string): New.
* sm/decrypt.c (prepare_decryption): Show cipher algo and mode.
(gpgsm_decrypt): Show key algo and fingerprint
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (pubkey_algo_to_string): New.
* sm/certcheck.c (do_encode_md): Replace GCRY_PK_ECDSA by GCRY_PK_ECC.
* sm/certreqgen-ui.c (check_keygrip): Add all ECC algorithms.
* sm/gpgsm.c (our_pk_test_algo): Also allow EdDSA.
* sm/verify.c (gpgsm_verify): Map ECC algo to ECDSA. Use new pubkey
algo name function
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/fingerprint.c (gpgsm_get_key_algo_info): Factor code out to ...
(gpgsm_get_key_algo_info2): new.
(gpgsm_pubkey_algo_string): New.
* sm/keylist.c (list_cert_colon): Put curve into field 17
(list_cert_raw): Print the unified key algotithm string instead of the
algo and size.
(list_cert_std): Ditto.
--
It is important to known whether a 256 bit ECC uses a NIST or a
Brainpool curve.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/tlv-builder.c: New.
* common/tlv.c: Remove stuff only used by GnuPG 1.
(put_tlv_to_membuf, get_tlv_length): Move to ...
* common/tlv-builder.c: here.
* common/tlv.h (tlv_builder_t): New.
--
Such code should actually go into libksba and we will eventually do
that. However, for now it is easier to keep it here.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sexputil.c (hash_algo_to_string): New.
--
Libgcrypt expects lowercase names and it is cumbersome to downcase
those retrieved via gcry_md_algo_name. It is easier and also faster
to use a dedicated map function.
* sm/certchain.c (is_cert_still_valid): Shortcut if tehre is no DP.
* common/audit.c (proc_type_verify): Print "n/a" if a cert has no
distribution point.
* sm/gpgsm.h (opt): Add field enable_issuer_based_crl_check.
* sm/gpgsm.c (oEnableIssuerBasedCRLCheck): New.
(opts): Add option --enable-issuer-based-crl-check.
(main): Set option.
--
If the issuer does not provide a DP and the user wants such an issuer,
we expect that a certificate does not need revocation checks. The new
option --enable-issuer-based-crl-check can be used to revert to the
old behaviour which requires that a suitable LDAP server has been
configured to lookup a CRL by issuer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgpdefs.h (SIGSUBPKT_KEY_BLOCK): New.
* g10/gpg.c (oIncludeKeyBlock): New.
(opts): New option --include-key-block.
(main): Implement.
* g10/options.h (opt): New flag include_key_block.
* g10/parse-packet.c (dump_sig_subpkt): Support SIGSUBPKT_KEY_BLOCK.
(parse_one_sig_subpkt): Ditto.
(can_handle_critical): Ditto.
* g10/sign.c (mk_sig_subpkt_key_block): New.
(write_signature_packets): Call it for data signatures.
--
This patch adds support for a to be proposed OpenPGP ferature:
Introduce the Key Block subpacket to align OpenPGP with CMS.
This new subpacket may be used similar to the CertificateSet of
CMS (RFC-5652) and thus allows to start encrypted communication
after having received a signed message. In practice a stripped down
version of the key should be including having only the key material
and the self-signatures which are really useful and shall be used by
the recipient to reply encrypted.
#### Key Block
(1 octet with value 0, N octets of key data)
This subpacket MAY be used to convey key data along with a signature
of class 0x00, 0x01, or 0x02. It MUST contain the key used to create
the signature; either as the primary key or as a subkey. The key
SHOULD contain a primary or subkey capable of encryption and the
entire key must be a valid OpenPGP key including at least one User ID
packet and the corresponding self-signatures.
Implementations MUST ignore this subpacket if the first octet does not
have a value of zero or if the key data does not represent a valid
transferable public key.
GnuPG-bug-id: 4856
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/miscellaneous.c (xreallocarray): New func.
* common/util.h (xtryreallocarray): New macro.
--
Very useful to match calloc behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/gpgscm/main.c: Switch to the new option parser.
* common/argparse.c, common/argparse.h: Remove.
* common/init.c (_init_common_subsystems): Do not call obsolete func.
* common/Makefile.am (common_sources): Remove those files.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/ksba-io-support.c (base64_reader_cb): Detect the END tag and
don't just rely on the padding chars. This could happen only with
CR+LF termnmated PEM files. Also move the detection into the invalid
character detection branch for a minor parser speedup.
--
GnuPG-bug-id: 4847
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_curve_to_oid): Add optional arg R_NBITS.
Change all callers.
--
In particular for ed25519 and cv25519 it is quite useful to have an
ability to get the required algorithm.
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87a9f793a106095e3838eb71825189d7)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_oid_or_name_to_curve): New.
(get_keyalgo_string): Use it.
--
We do not always have an OID, so except the name or the alias of the
curve as well. This creates a second entry mapping to the same name
but that does not matter.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/openpgp-oid.c (openpgp_oid_to_str): Remove duplicated call.
--
The removed function was already called. No memleak etc, though.
Fixes-commit: 4a1558d0c7190cf13d35385e47291a7aa121be3e
Signed-off-by: Werner Koch <wk@gnupg.org>
