* tools/gpg-wks-client.c (oRealClean): New.
(opts): Add "realclean".
(parse_arguments): Implement.
(main): Take a copy of the module name to fix bad assignment from a
former patch.
* tools/gpg-wks-server.c (main): Ditto.
* tools/gpg-wks.h (opt): Add field realclean.
* tools/wks-util.c (wks_get_key): Call gpg with export-realclean
depending on the new option.
--
The default for gpg-wks-client is to install keys with all valid key
signatures. The new option will eventually allow to install the keys
only with key signatures done by trusted-keys. Also the export-option
is in gpg, it requires one more gpg patch to make it actually work.
* tools/wks-util.c (wks_get_key): Change from export-minimal to
export-clean
--
To properly work with tusted introducers et al. it is important to also
upload valid key signatures to the Web Key Directory.
* tools/wks-util.c (write_to_file): Rename to ...
(wks_write_to_file): this, make global, and support NULL for fname.
* tools/gpg-wks-client.c (command_check): Write to key.
* tools/gpg-wks.h (opt): Add add_revocs.
* tools/wks-util.c (wks_get_key): Add arg 'binary'.
(wks_armor_key): New.
(wks_find_add_revocs): New.
(wks_cmd_install_key): Get key in binary mode and add revocations if
enabled.
* tools/gpg-wks-client.c (oAddRevocs): New.
(opts): Add --add-revocs.
(parse_arguments): Set option,
(command_send): Get key in binary mode, add revocations if enabled,
and explictly armor key. Remove kludge to skip the Content-type line
in no_encrypt mode.
(mirror_one_keys_userid): Always filter the key to get rid of the
armor as received from dirmngr. Add revocations from the local
keyring.
--
Note that this also fixes an oddity of the new mirror command which
used to store the keys armored as received from dirmngr.
* tools/gpg-wks-client.c (aMirror,oBlacklist,oNoAutostart): New.
(opts): Add ----mirror, --no-autostart, and --blacklist.
(parse_arguments): Parse new options.
(main): Parse common.conf. Implement aMirror.
(mirror_one_key_parm): New.
(mirror_one_keys_userid, mirror_one_key): New.
(command_mirror): New.
* tools/gpg-wks.h (struct uidinfo_list_s): Add fields flags.
* tools/wks-util.c (wks_cmd_install_key): Factor some code out to ...
(wks_install_key_core): new.
* tools/call-dirmngr.c (wkd_dirmngr_ks_get): New.
--
This implements the basic LDAP to WKD mirroring. The blacklist
option and domain restrictions are not yet fully implemented.
Take care: In OpenLDAP you may need to increase the paged result limit
by using a configuration like:
dn: olcDatabase={1}mdb,cn=config
changetype: modify
replace: olcLimits
olcLimits: dn.subtree="dc=example,dc=org" size.prtotal=unlimited
GnuPG-bug-id: 6224
* common/recsel.c (recsel_parse_expr): Add flag -t.
* common/stringhelp.c: Remove assert.h.
(strtokenize): Factor code out to do_strtokenize.
(strtokenize_nt): New.
(do_strtokenize): Add arg trim to support the strtokenize_nt.
* common/t-stringhelp.c (test_strtokenize_nt): New test cases.
* tools/wks-util.c (wks_list_key): Use strtokenize_nt and the recsel
flag -t.
--
This fixes a bug with user ids with leading spaces because:
wks-client lists all mail addresses from the key and matches them to the
requested mail address.
If there are several user-ids all with the same mail address
wks-client picks one of them and then extracts exactly that user id.
However, here it does not match by the mail address but by the full
user-id so that we can be sure that there will be only one user-id in
the final key.
The filter built expression unfortunately strips leading blanks but
requires a verbatim match. Thus it won't find the user id again and
errors out.
The new -t flag and a non-trimming strtokenize solves the problem.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-util.c (wks_cmd_install_key): Don't set u+x on the file.
(ensure_policy_file): No need to make the policy file group writable.
--
The policy file is rarely changed thus no need to g+w. Setting +x on
a plain file does not make sense at all.
GnuPG-bug-id: 5214
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
* common/stringhelp.h (split_fields): Use const * for the strings in
the ARRAY.
(split_fields_colon): Likewise.
* common/stringhelp.c (split_fields, split_fields_colon): Fix
the implementation.
* agent/call-scd.c, agent/command.c: Follow the change.
* common/t-stringhelp.c, dirmngr/loadswdb.c: Likewise.
* g10/call-agent.c, tools/card-call-scd.c: Likewise.
* tools/card-yubikey.c, tools/gpg-card.c: Likewise.
* tools/gpg-card.h, tools/gpg-wks-client.c: Likewise.
* tools/gpgconf-comp.c, tools/gpgconf.c: Likewise.
* tools/wks-util.c: Likewise.
--
The strings in the ARRAY don't need to be released by caller, as those
are references. It's easier to follow the code when it's explicitly
const *.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR16)
(KEYDB_SEARCH_MODE_FPR20, KEYDB_SEARCH_MODE_FPR32): Remove. Switch
all users to KEYDB_SEARCH_MODE_FPR along with the fprlen value.
--
These search modes were added over time and there has until recently
be no incentive to remove the cruft. With the change for v5 keys I
finally went over all places and allowed the generic fingerprint mode
along with a given length of the fingerprint at all places.
Consequently the other modes can now be removed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-util.c (wks_get_key, wks_filter_uid): The filter
expression needs a space before the value.
(install_key_from_spec_file): Replace es_getline by es_read_line and
remove debug output.
--
A value of starting with '<' was considered an invalid operator due to
our tokenization method.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks.h (opt): Add field with_colons.
* tools/gpg-wks-client.c (oWithColons): New const.
(opts, parse_arguments): Add option --with-colons.
(main): Change aSupported to take several domains in --with-colons
mode.
(command_send): Factor policy getting code out to ...
(get_policy_and_sa): New function.
(command_supported): Make use of new function.
--
In addition to this the --create command now also supports a
submission address only in the policy file. That means the
submission-address file is not anymore required and can be replaced by
the policy file.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks-client.c (get_key_status_parm_s)
(get_key_status_cb, get_key): Move to ...
* tools/wks-util.c: ...here.
(get_key): Rename to wks_get_key.
* tools/gpg-wks-server.c: Include userids.h.
(command_install_key): Allow use of a fingerprint.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks.h (policy_flags_s): Add field 'submission_address'.
* tools/wks-util.c (wks_parse_policy): Parse that field.
(wks_free_policy): New.
* tools/gpg-wks-client.c (command_send): Also try to take the
submission-address from the policy file. Free POLICY.
* tools/gpg-wks-server.c (process_new_key): Free POLICYBUF.
(command_list_domains): Free POLICY.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-util.c (list_key_status_cb): Rename to key_status_cb.
(wks_filter_uid): New.
(wks_list_key): Allow FPR to be NULL. Return an error if no
fingerprint was found.
* tools/gpg-wks-server.c (process_new_key)
(check_and_publish): Remove now useless extra check for FPR.
* tools/gpg-wks-client.c (command_check): Ditto.
(command_send): Filter out the newest uid.
--
This fixes the case of having several userids with all the the same
mailbox. Now we use the latest user id created. This patch is also a
prerequisite to automatically create a new user id for providers with
the mailbox-only policy.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/wks-util.c: Include status.h.
(statusfp): New global var.
(wks_set_status_fd): New func.
(wks_write_status): New func.
* tools/gpg-wks-client.c: Include status.h.
(oStatusFD): New constant.
(opts): New option --status-fd.
(parse_arguments): Handle that option.
(main): Return STATUS_SUCCESS or STATUS_FAILURE.
--
This option is useful in case gpg-wks-client is spawed using a double
fork approach which does not allow to return the exit code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpg-wks-server.c (list_key_status_cb): Remove.
(list_key): Move to ...
* tools/wks-util.c (wks_list_key): here and rename. Add new args
R_FPR and R_MBOXES and remove the CTX.
(list_key_status_cb): New.
* tools/wks-util.c: Include ccparray.h, exectool.h, and mbox-util.h.
* tools/gpg-wks-server.c (process_new_key): Replace list_key by
wks_list_key.
(check_and_publish): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/mime-maker.c (ensure_part): Make sure to set R_PARENT on
error.
(add_missing_headers): Ensure that ERR is set on success.
* tools/wks-util.c (wks_parse_policy): Fix indentation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/call-dirmngr.c (wkd_get_policy_flags): New.
* tools/gpg-wks.h (struct policy_flags_s, policy_flags_t): New.
* tools/wks-util.c (wks_parse_policy): New.
* tools/gpg-wks-client.c (command_send): Get the policy flags to show
a new info line.
* tools/gpg-wks-server.c (get_policy_flags): New.
(process_new_key): get policy flag and add a stub for "auth-submit".
(command_list_domains): Check policy flags.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/send-mail.c, tools/send-mail.h: New.
* tools/wks-util.c: New.
* tools/Makefile.am (gpg_wks_server_SOURCES): Add them.
(gpg_wks_client_SOURCES): Ditto.
* tools/gpg-wks.h (opt): Add fields use_sendmail and output.
* tools/gpg-wks-client.c: Add options --send and --output. Rename
command --send to --create.
(command_send, send_confirmation_response): Output via wks_send_mime.
* tools/gpg-wks-server.c: Add options --send and --output.
(send_confirmation_request): Output via wks_send_mime.
(check_and_publish): Add hack for name-value bug.
--
With this code, a dedicated user on the server along with a procmail
script, it was possible to run a basic test.
Signed-off-by: Werner Koch <wk@gnupg.org>
Werner Koch