* scd/app-p15.c (read_ef_prkdf, read_ef_pukdf)
(read_ef_cdf, read_ef_aodf): Allow for a zero length path and
correctly skip unsupported auth types.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary_ext): Handle the 0x6a86 SW the
same as 6b00.
* scd/apdu.c (apdu_get_atr): Modify debug messages.
* scd/app-p15.c (app_select_p15): Print FCI on error.
(read_p15_info): Clean up diag in presence of debug options.
--
Some cards return 6a86 instead of 6b00.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_request_identities): Remove double
check of ERR.
* g10/getkey.c (get_pubkey_byname): Remove double use of break.
* g10/pkglue.c (pk_encrypt): Handle possible NULL-ptr access due to
failed malloc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (open_pcsc_reader): PCSC.COUNT should
be incremented before possible call of close_pcsc_reader.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (pcsc_cancel): New.
(pcsc_init): Load new function.
(connect_pcsc_card): Use it after a removed card error.
--
Well, that was easier than I expected yesterday.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Do not decrement refcount if already
zero. Always release context if or becomes zero.
(apdu_dev_list_start): Unlock prior to close_pcsc_reader. For PC/SC
increment the count. Always release the lock.
(apdu_dev_list_finish): No more unlocking. Use close_pcsc_reader
instead of code duplication.
* scd/apdu.c (pcsc_error_string): Add an error code.
* scd/scdaemon.c (scd_kick_the_loop): Fix a diagnostic.
--
There was an obvious bug in that the pcsc.count could go below zero
and thus there was no chance to get the context release. Releasing
and recreating the context is at least under Windows important to get
rit of the PCSC_E_SERVICE_STOPPED.
Also removes a potential problem in holding the reader_table_lock
between calls to apdu_dev_list_start apdu_dev_list_finish. There is
no need for this. Instead we bump the pcsc.count.
The reader_table_lock strategy should be reviewed; we may be able to
remove it.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_p15_info): Improve D-TRUST card detection.
(do_getattr): Fix faulty code for the last commit. Append the product
name to MANUFACTURER.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (get_dispserialno): Add dedicated handling for RSCS.
--
In fact we fix the display of the s/n because the s/n was taken from a
certificate.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c: Include openpgpdefs.h.
(struct prkdf_object_s): Add fields have_keytime and ecdh_kdf.
(read_p15_info): Set ecdh_kdf.
(keygrip_from_prkdf): Flag that we have the keytime.
(send_keypairinfo): Send the key time only if valid.
(send_key_fpr_line): New.
(send_key_fpr): New.
(do_getattr): Add KEY-FPR.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (cdf_object_from_label): New.
(cdf_object_from_certid): Fallback to label matching.
(read_p15_info): Ditto.
(keygrip_from_prkdf): Ditto. Replace duplicated code by a call to
cdf_object_from_objid.
--
In case there is no certificate for a private key we now also try to
find a certificate using a matching label.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (keygripstr_from_pk_file): Fix ignored error.
(get_nks_tag): New.
(do_learn_status_core): Use it. Make sure not to mange the
KEYPAIRINFO line if no usage is known.
(do_readkey): Output the KEYPAIRINFO for the keygrip case.
--
Note that this only handles the most common case of providing a
keygrip. $AUTHKEYID and ODLM are not yet supported.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-help.c (app_help_get_keygrip_string_pk): Make HEXKEYGRIP
parm optional.
* scd/command.c (do_readkey): Remove duplicate output of keypairinfo
lines.
--
Note that this change needs a fix in app-p15 which does not yet handle
the APP_READKEY_FLAG_INFO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_vendor_specific_pinpad_setup): New.
(ccid_vendor_specific_setup): Only send CLEAR_HALT.
(ccid_transceive_secure): Each time, use send_escape_cmd.
--
GnuPG-bug-id: 5297
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_learn): Add flag --reread.
* scd/app-common.h (struct app_ctx_s): New field need_reset.
* scd/app.c (write_learn_status_core): Set need_reset if we notice an
error after returning from a reread. Change all callers of card
functions to return GPG_ERR_CARD_RESET so that that app is not anymore
used.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_deinit): Factor code out to ...
(release_lists, release_tokeninfo): new.
(read_ef_tokeninfo): Reset all data before reading.
(read_p15_info): Ditto.
(do_learn_status): Implement reread flag.
--
Objects of a card may be protected by a PIN and thus only readble
after a verify command. This new flag makes it possible to gather the
entire PKCS#15 card info again without a need for a reset (and thus
loss of the verify status).
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_sign): Rewrite.
--
This basically works now but for my test card I need to pass
--cert-digest-algo-512 manually. Need to check this again and
automate it. It will also be useful to take the NotBefore timestamp
from the dummy X.509 certificate and use that for the PGP key creation
time.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_pso_csv): New.
* scd/app-help.c (app_help_pubkey_from_cert): Uncompress a point if
needed.
* scd/app-p15.c (CARD_PRODUCT_RSCS): New.
(struct prkdf_object_s): Add fields is_ecc, token_label, and
tokenflags.
(do_deinit): Free new fields.
(cardproduct2str): New.
(read_ef_prkdf): Set new is_ecc flag.
(read_ef_tokeninfo): Store some data and move Tokeninfo diags to ...
(read_p15_info): here. set the product info here after all data has
been gathered.
(send_keypairinfo): Chnage the way the gpgusage flags are used.
(make_pin_prompt): If the token has a label and the current cert has
no CN, show the label as holder info.
(do_sign): Support ECDSA. Take care of the gpgusage flags.
(do_decipher): Support ECDH. Take care of the gpgusage flags.
--
This has been tested with Trusted Object Manager generated cards by
Rohde & Schwarz Cybersecurity.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (CMD_SELECT_DATA): New.
(iso7816_select_data): New.
* scd/app-openpgp.c (do_readcert): Allow OpenPGP.1 and OPENPGP.2
(do_writecert): Ditto.
(do_setattr): Add CERT-1 and CERT-2.
--
This has been tested with a Zeitcontrol 3.4 card. A test with a
Yubikey 5 (firmware 5.2.6) claiming to support 3.4 failed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): s/extcap_v3/is_v3/.
s/max_certlen_3/max_certlen. Change users.
--
The extcap_v3 flag is set if the version is 3 or later and as such
does not only declare that the v3 extcap layout is used. Make this
clear by renaming.
Likewise for max_certlen_3.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): Add new flag.
(get_cached_data): Force chace use if flag is set.
(app_select_openpgp): Avoid reading DO 6E multiple times.
--
The do not cache property of 6E was introduced so that we can change
for example key attributes without getting into with the cache.
However, for initial reading the cache makes a lot of sense and thus we
now use this hack to only temporary cache. A better strategy would be
to clear the cache when we change card data but that is more error
prone.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (prepare_verify_pin): Allow for PRKDF to be NULL.
(make_pin_prompt): Ditto.
(verify_pin): Ditto.
(do_check_pin): Allow using the Label to specify a PIN.
--
Note that a label may not work in all cases because we can't select
the protected object's EF first.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (parse_common_obj_attr): Map spaces in the lapel to
underscores.
(read_ef_aodf): Prettify printing of the type.
(do_getattr): New attribute CHV-LABEL
(do_learn_status): Emit CHV-LABEL.
(verify_pin): Distinguish the PIN prompts.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (struct app_local_s): Add ecc.algo field.
(send_key_attr): Use ecc.algo field.
(ecc_read_pubkey): Use ecc.algo field.
(ecc_writekey): Ed448 means EdDSA.
(parse_algorithm_attribute): Set ecc.algo field from card.
Add checking for Ed25519 for ECC_FLAG_DJB_TWEAK flag.
--
There used to be a possible support of Ed25519 with ECDSA, (instead of
EdDSA). To distinguish key for Ed25519 for EdDSA, we use the
flag: (flags eddsa). Ed448 has no support for ECDSA and defaults to
EdDSA even if no such flag.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.h (opt): Add field opcsc_shared.
* scd/scdaemon.c (opcscShared): New.
(opts): Add "--pcsc-shared".
(main): Set flag.
* scd/apdu.c (connect_pcsc_card): Use it.
(pcsc_get_status): Take flag in account.
* scd/app-openpgp.c (cache_pin): Bypass in shared mode.
(verify_chv2: Do not auto verify chv1 in shared mode.
* scd/app-piv.c (cache_pin): By pass caceh in shared mode.
--
This option should in general not be used. The patch tries to limit
bad effects but using shared mode is somewhat dangerous depending on
the other PC/SC users.
* scd/app-piv.c (app_select_piv): Allow for full AID.
--
It appears that SP-800-73-x is not too clear about the format of these
objects. Many current cards (such as the Yubikey 5 series) apparently
have only the PIX in DO 0x4F and only the RID in object 0x79/0x4F.
However, other cards as well as the PivApplet Javacard applet have the
full AID in 0x4F (which actually seems closer to what the standard
says). PivApplet also has the full AID in 0x79/0x4F, but this is
probably incorrect. (Here is a long discussion of the matter from an
OpenSC author:
https://github.com/arekinath/PivApplet/issues/43#issuecomment-772649709)
[Taken from a mail to gnupg-devel date 2021-02-03.]
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct gpgusage_flags_s): New.
(struct prkdf_object_s): Add field gpgusage.
(struct app_local_s): Add field any_gpgusage.
(dump_gpgusage_flags): New.
(read_p15_info): Parse athe gpgusage flags.
(do_getattr): Take care of the gpgusage flags.
--
This features allows to mark keys to be used for OpenPGP. This is
done by putting additional extended key infos into the certificate
stored on the cards. Only if any such extended key usage is detected
for a stored certificate this new mode chimes in.
This feature gives the card issuer a high flexibility on how to make
sure certain keys are used with OpenPGP.
* scd/app-p15.c (struct keyaccess_flags_s): New.
(struct prkdf_object_s): Add field accessflags.
(dump_keyusage_flags): New.
(dump_keyaccess_flags): New.
(parse_keyaccess_flags): New.
(parse_common_key_attr): Return access flags.
(read_ef_prkdf): Parse the access flags. Allow for ECkeys.
(read_ef_pukdf): Ditto. Use new functions for printing.
(read_p15_info): Use new fucntion for printing.
* scd/app-p15.c (struct cdf_object_s): Add fields authid, authidlen,
and label.
(struct prkdf_object_s): Add field label.
(struct aodf_object_s): Ditto.
(release_cdflist): Free new fields.
(release_prkdflist): Free new field.
(release_aodf_object): Ditto.
(parse_common_obj_attr): Return the label.
(read_ef_prkdf): Store the label.
(read_ef_pukdf): Ditto.
(read_ef_cdf): Use parse_common_obj_attr and store authid and label.
Print them im verbose mode.
(read_ef_aodf): Store the label and print it.
* scd/app-p15.c (select_and_read_binary): Allow to skip the select.
(select_and_read_record): Return the statusword. Silence error
message for SW_FILE_STRUCT.
(select_ef_by_path): Fix selection with a home_DF.
(read_first_record): Fallback to read_binary for CardOS and return
info about this.
(read_ef_prkdf): Use info from read_first_record to decide whether to
use record or binary mode.
(read_ef_pukdf): Ditto.
(read_ef_aodf): Ditto.
(read_ef_cdf): Ditto. New arg cdftype for diagnostics.
(read_p15_info): Pass cdftype.
* scd/apdu.h (SW_FILE_STRUCT): New.
* scd/apdu.c (apdu_strerror): Map that one to a string.
* scd/iso7816.c (map_sw): and to a gpg-error.
* scd/command.c (do_readkey): Make --info also work if a readkey
command is available.
* scd/app-p15.c (cdf_object_from_certid): Fix a but introduced with
the previous commit.
* scd/app-p15.c: Add a couple of oid constants.
(struct cdf_object_s): Replace fields image and imagelen by cert.
(struct prkdf_object_s): Add extusage flags
(send_keypairinfo): Use them.
(cdf_object_from_certid): Factor parts out to ...
(cdf_object_from_objid): new function.
(read_ef_prkdf): Move info printing to ...
(read_p15_info): here. Fill the extusage flags.
(readcert_by_cdf): Cache the ksba cert object instead of the binary
cert.
* scd/app.c (select_additional_application): Fix a log_debug call.
(scd_update_reader_status_file): Ditto.
--
This allows us to return only KEYPAIRINFO lines for keys we can
actually use.
* scd/app-p15.c (pukdf_object_t): New.
(struct app_local_s): Add field public_key_info.
(release_pukdflist): New.
(select_and_read_record): No diagnostic in case of not_found.
(read_first_record): New. Factored out from the read_ef_ fucntions.
(read_ef_pukdf): New. Basically a copy of read_ef_prkdf for now.
(read_p15_info): Also read the public keys.
(cardtype2str): New.
(read_ef_tokeninfo): Print a string with the cardtype.
* scd/app-p15.c: Include host2net.h.
(DEFAULT_HOME_DF): New.
(select_and_read_binary): Replace slot by app. Change callers. Use
select_ef_by_path.
(select_and_read_record): ditto.
(select_ef_by_path): Make use use the home_df.
(parse_certid): Adjust for always set home_df.
(print_tokeninfo_tokenflags): Ditto.
(app_select_p15): Take the home_df from the FCI returned by select.
--
This uses modern APDUs and always selectd starting at the PCKS-15 home
DF. We could have made this much simpler but the goal is to keep
support for older cards although we can't test that easily.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_select_path): Add arg from_cdf.
* scd/app-nks.c (do_readkey): Adjust for this change.
* scd/app-p15.c (CARD_TYPE_CARDOS_53): New.
(IS_CARDOS_5): New.
(card_atr_list): Add standard ATR for CardOS 5.3.
(select_and_read_binary): Remove the fallback to record read hack.
(select_and_read_record): New.
(select_ef_by_path): Rework and support CardOS feature.
(read_ef_prkdf): Use read record for CardOS.
(read_ef_cdf): Ditto.
(read_ef_aodf): Ditto. Also fix bug in the detection of other
unsupported attribute types.
(verify_pin): Use IS_CARDOS_5 macro.
(app_select_p15): Force direct method for CardOS.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_ef_tokeninfo): Print the ATR in verbose mode.
--
It is convenient to see the ATR close to the other info,
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (do_sign): Handle plain SHA-3 digests and verify
encoding of ASN.1 encoded hashes.
--
This makes it possible to create CSRs for NetKey card keys which are
signed with SHA256 by default.
GnuPG-bug-id: 5184
* scd/ccid-driver.c (abort_cmd): Add INIT argument to support
synchronize until success, even ignoring timeout.
(bulk_in): Normal use case of abort_cmd.
(ccid_vendor_specific_init): Initial use case of abort_cmd.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-nks.c (filelist): Use special value -1 for IDLM pubkeys.
(keygripstr_from_pk_file): Handle special value.
(do_readcert): Ditto.
(do_writecert): Ditto.
--
This allows to get information about the keys from the card. However
the do_readkey still requires a fallback to readcert. This does not
work because there are no certificates yet on the card. The fix is to
fully implement do_readkey.
* scd/apdu.c (apdu_strerror): Add missing status codes.
* scd/command.c (cmd_getinfo): New sub-command apdu_strerror.
--
This is quite handy for gpg-card's APDU command and avoids that we
need to duplicate the mapping table or put it into a shared file.
* scd/app.c (app_dump_state): Also print the refcount.
(maybe_switch_app): Make sure the app exists on the card.
--
When switching the current card and the card does not support the same
apps as the former, we now reset the app to the first one.
Testcase is to use a standard OpenPGP card and a P15 card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (is_same_serialno): New.
(check_application_conflict): Use this.
(select_application): Ditto.
(app_switch_current_card): Ditto.
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
--
This is required because we change what we emit as serialno of OpenPGP
cards but existing keys still use the old form of the serial
number (i.e. with a firmware version).
See-commit: 3a8250c02031080c6c8eebd5dea03f5f87f9ddd7
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary_ext): Add optional arg r_sw and
change callers.
(iso7816_read_record): Factor all code out to ...
(iso7816_read_record_ext): new.
* scd/app-p15.c (select_and_read_binary): Fallback to record reading.
(read_ef_aodf): Clear EOF error.
* scd/app.c (app_new_register): Call app_munge_serialno for Yubikeys.
(app_munge_serialno): Handle Yubikey serial numbers.
(card_get_serialno): Remove special Yubikey treatment. Drop arg
is_canonical.
(app_get_serialno): Clear ERRNO on error.
(card_get_dispserialno): New. Also change formatting of Yubikey and
OpenPGP numbers to match those printed on the card.
(app_get_dispserialno): New.
* scd/app-openpgp.c (do_getattr): Use app_get_dispserialno.
(yubikey_get_serialno): Remove.
* scd/app-piv.c (get_dispserialno): Remove.
(do_getattr): Use app_get_dispserialno.
--
This patch gets us back to a unique serial number for cards and
provides a stable serial number as printed for Yubikeys.
Because we use a slightly different serial number now for Yubikeys and
cards only supporting OpenPGP card we need to come up with another
change so that the version number of OpenPGP serial numbers are
ignored when comparing card serial numbers. This is so that existing
stub keys of gpg-agent will continue to work.
GnuPG-bug-id: 5100
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (reset_notify): Add option --keep-lock.
(do_reset): Add arg keep_lock.
(cmd_lock): Send progress status.
* g10/call-agent.c (agent_scd_apdu): Add more pseudo APDUs.
* g10/card-util.c (send_apdu): Ditto.
(factory_reset): Use lock commands.
--
This is required so that for example Kleopatra does not detect the
RESET and issues a SERIALNO of its own, thus conflicting with our
SERIALNO undefined.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (apdu_send_direct): Use lock_slot.
--
With trylock_slot, it may return SW_HOST_BUSY. This may occur when
apdu_get_status is called by scd_update_reader_status_file.
Simply using lock_slot is much easier for user of apdu_send_direct.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_require_get_status): For VENDOR_SCM reader,
return 0 only at the initial call.
(bulk_in): Don't detect an error for VENDOR_SCM reader, just kicking
the loop, to invoke scd_update_reader_status_file, which calls
ccid_slot_status again.
(ccid_slot_status): Move the call of ccid_vendor_specific_setup to...
(ccid_get_atr): ... here.
--
For readers with interrupt transfer support, it is only intr_cb which
sets handle->powered_off to 1. Keeping this condition makes no race.
The function ccid_slot_status can also detect a communication error,
which causes apdu_close_reader (but not setting ->powered_off).
GnuPG-bug-id: 5121
Fixes-commit: 920f258eb6018ecec1d63bad6a0fb0772f72affa
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-piv.c (do_writecert): Flush the cache of the data object.
--
Suggested-by: Ingo Klöcker
GnuPG-bug-id: 5102
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (ccid_vendor_specific_setup): New. Limit
only for SPR532, excluding other readers by SCM.
(ccid_slot_status): Use ccid_vendor_specific_setup.
--
We follow the setup procedure of libccid implementation, which sends
the escape command for SPR532 only.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.c (ccid_slot_status): Handle LIBUSB_ERROR_TIMEOUT.
--
With SPR532, at the first connection, it fails by
LIBUSB_ERROR_TIMEOUT, but no retry.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (struct reader_table_s): Remove is_spr532.
(pcsc_vendor_specific_init): Send the ESC command for SPR532.
(pcsc_pinpad_verify, pcsc_pinpad_modify): Remove no_lc hack.
--
The "no_lc" hack lets PC/SC-lite send the ESC command for SPR532
internally, for pcsc_pinpad_verify. However, PC/SC-lite doesn't do
that for pcsc_pinpad_modify, unfortunately. Besides, I'm not sure
this hack works on Windows, which has different implementation of
PC/SC service.
It's better to send the ESC command by the driver explicitly, at the
initialization. Sending the ESC command results PCSC_E_NOT_TRANSACTED
error when a card is not active (that is the case, usually). We
ignore this error.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/ccid-driver.c (intr_cb): Handle the case of multiple messages.
--
SPR532 USB Smart Card Reader (also know as SPR332) may send two
messages at once for a single interrupt transfer. An example transfer
observed was like: 50 03 50 02, which is considered valid, according
to the CCID specification.
GnuPG-bug-id: 5065
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/card-util.c (kdf_setup): Fix the default value.
* scd/app-openpgp.c (do_setattr): Support kdf-setup "off" by
Zeitcontrol. Make sure Gnuk and Yubikey work well.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (verify_chv2): Call verify_a_chv with chvno=1
when needed.
--
Confusingly, verify_chv2 has two different purposes; One for
verifying with CHV2 (in addition to CHV1), and the call by
CHECKPIN. For the latter, we should check CHV1.
Fixes-commit: af189be481df02a77e088aa0a60a1fc02dfa12bf
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_setattr): Call flush_cache_item always.
--
Only it was called when there was an object with KDF_DATA_LENGTH_MAX.
No matter the VALUELEN, it should be flushed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (data_objects): It may be longer.
Fixes-commit: 90d0072165cc5c6888f14462392a211de0c4b232
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
The limit on 4 readers I introduced in 2003 is too low for some of our
use cases. 16 looks better. TODO: Return a useful error message in
gpg-card if the limit has been reached.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* cd/app-openpgp.c (data_objects): Add 0x00FA.
(do_getattr): Add KEY-ATTR-INFO.
--
See the section 4.4.3.11 Algorithm Information in the OpenPGP card
functional specification version 3.4.1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/command.c (cmd_apdu): Add new option --data-atr.
* tools/gpg-card.c (cmd_apdu): Use that here. Also fix the --exlen
option and do not print the statusword in atr mode.
* tools/card-call-scd.c (scd_apdu): Detect atr mode anddon't assume a
status word.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (app_new_register): Do not use apdu_get_slot.
--
apdu_get_slot() may only be used after the APP has been initialized.
Thus we need to pass teh slot here directly.
Fixes-commit: 9f148360a2bf04672b43ef7cec48e21d44b06ae1
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-common.h (cardtype_t): Add CARDTYPE_GNUK and
CARDTYPE_ZEITCONTROL.
* scd/app.c (strcardtype): Handle CARDTYPE_GNUK and
CARDTYPE_ZEITCONTROL.
(app_new_register): Detect Gnuk and Zeit Control implementation
by examining its ATR string.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (verify_chv2): Check availability of keys in
question.
--
With buggy Gnuk (<= 1.2.15), when no encr/auth keys are available,
it fails decrementing the signature error counter. This change
can avoid the issue.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (open_ccid_reader): Add arg r_cciderr.
(apdu_open_reader): Print a note on EPERM of the USB device.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/ccid-driver.h (CCID_DRIVER_ERR_USB_*): New error codes.
* scd/apdu.h: New SW_HOST error codes.
* scd/apdu.c (host_sw_string): Print them
* scd/ccid-driver.c (map_libusb_error): New.
(ccid_open_usb_reader, bulk_in, abort_cmd): Map libusb error codes.
* scd/iso7816.c (map_sw): Map new codes to gpg-error.
--
This change will help to get low level error conditions from hipher
application code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_sethash): Add option --pss and allow for
--hash=null.
* agent/agent.h (struct server_control_s): Add digest.is_pss and
zero where needed.
* agent/pksign.c (agent_pksign_do): Allow for PSS with cards.
* scd/command.c (cmd_pksign): Add for --hash=none.
--
This is not a full implementaion of PSS but allows scdaemon card
drivers to detect already PSS formatted data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/apdu.c (close_pcsc_reader): Unlock the reader_table_lock.
(apdu_dev_list_finish): Release the context when no readers.
--
Fixes-commit: 46d185f60397f68830bfdfb99627b29aea5016f1
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/apdu.c (close_pcsc_reader): Check if it's not in the loop.
--
GnuPG-bug-id: 4998
Reported-by: Kevin Locke
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/iso7816.c (CMD_UPDATE_BINARY): New.
(iso7816_update_binary): New.
* scd/app-nks.c (do_deinit): Factor some code out to...
(flush_fid_cache): new.
(do_writecert): New.
(app_select_nks): Register new handler.
--
This can be used with gpg-card to write the 3 extra certificates of a
Telesec TCOS Signature Card v2. The card with the qualified signature
is distributed with the keys for encryption and advanced signatures
but without the certificates. The certificates can be downloaded from
the website after an mail confirmation. Unpacked the downloaded
zipfile has these certificates:
auth_zert.crt
sig_zert.crt
enc_zert.crt
Using gpg-card issue these commands:
writecert NKS-NKS3.4531 <sig_zert.crt
writecert NKS-NKS3.45B1 <enc_zert.crt
writecert NKS-NKS3.4571 <auth_zert.crt
Don't mix that up, tight now there is no checking that the
certificates match the public key. I also need to write another patch
to actually implement signing and encryption with these nistp256
certificates.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_serialno): Set/clear card removed flags for all
connections using the current card.
--
This seems to solve the problems I had in gpg-card and ssh. I am not
sure why the old code was done this way - maybe an oversight when
adding support for multiple cards.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Fixes-commit: 074ab108e768b2f946d789c1f3a7f14a65e07c52
which was recently pushed to make use of $SOURCE_DATE_EPOCH
as fallback.
Also fixes two typos
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (select_all_additional_applications_internal): Re-select
first app. Add arg 'ctrl'.
--
Usually keygrip based access to the Yubikey does a switching back and
forth and thus keeps the card and scdaemon's internal state in sync.
However, if we do only a listing scdaemon did not reselect the first
application (e.g. OpenPGP) after adding other applications (e.g. PIV)
and thus led to wrong info returned in a listing.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (get_dispserialno): Move more to the top.
(do_getattr): Add $DISPSERIALNO and SERIALNO. Make CHV-STATUS work
with NKS15.
(verify_pin): Use dedicated min. PIN lengths.
(parse_pwidstr): Support NKS15
--
GnuPG-bug-id: 4938
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c (struct fid_cache_s): New.
(struct app_local_s): Add field 'fid_cache'.
(do_deinit): Release the cache.
(keygripstr_from_pk_file): Implement the cache.
(find_fid_by_keyref): New
(do_sign, do_decipher): Use new function.
(do_with_keygrip): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-nks.c: Major rework to support non-RSA cards.
--
This is a fist step so support this ECC card. The code has been
reworked while taking care that old cards should keep on working.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (send_card_and_app_list): Detect no app case.
--
This is a minor nug fix to return a better error message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (make_pin_prompt): Factor some code out to ...
(get_dispserialno): this.
(do_getattr): Use new fucntion for a $DISPSERIALNO.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): New fields common_name and
serial_number.
(release_prkdflist): Free them.
(keygrip_from_prkdf): Parse cert and set them.
(any_control_or_space): New.
(make_pin_prompt): New.
(verify_pin): Construct a pretty PIN prompt.
(do_sign): Remove debug output.
--
The D-Trust card has the SerialNumber part of the Subject printed on
the front matter, we assume this is also possible with other cards and
thus we show this as serial number.
The holder of the card is also extracted from the card's subject.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (map_sw): Detect 0x63Cn status code.
--
I really wonder when that got lost and we ended up with a simple card
error.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_select_mf): New.
* scd/app-p15.c (card_product_t): New.
(struct app_local_s): Add field 'card_product'.
(read_ef_tokeninfo): Detect D-Trust card.
(prepare_verify_pin): Switch to D-Trust AID.
(do_decipher): Restore a SE for D-TRust cards. Chnage the passing
indicator to 0x81.
--
Using what I learned from a USB trace running the Governikus Signer
Software on Windows this fixes the left over problem with the new
D-Trust card support.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (get_manufacturer): New..
(do_getattr): Add new attribute "MANUFACTURER".
(do_learn_status): Always print it.
--
This will make it easy to maintain the list of OpenPGP vendors at just
one place.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (prepare_verify_pin): Allow use without an AODF.
(verify_pin): Ditto.
(do_with_keygrip): Implement capability restrictions.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/command.c (cmd_keyinfo): Use Gcrypt constants for CAP.
* scd/app-openpgp.c (do_with_keygrip): Adjust for them.
* scd/app-piv.c (do_with_keygrip): Ditto.
--
That makes it easier to read. An open question is whether we should
allow several capabilities and whether they are the ORed or ANDed.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (struct prkdf_object_s): Add flag pin_verified.
(verify_pin): Make use of it.
--
Theee is still a problem with the APDUs we send: Switching between
signing and decryption does work but not in the other way.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_sign): Move keygrip_from_prkdf before PIN
verification.
(do_decipher): Add keygrip_from_prkdf.
--
This is required because that function may change the current file
which is set by prepare_verify_pin right before MSE. HAs alredy been
done on the backport to 2.2
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (do_decipher): New.
--
tested using the D-TRUSt card and a SCR3310 reader. The Kobil KAAN
Advanced, I used for the signing tests could not be used because it
supports only Short APDU Level exchange.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-help.c (app_help_get_keygrip_string_pk): Add optional arg
r_pkey and change all callers.
(app_help_get_keygrip_string): Ditto.
* scd/app-p15.c (struct cdf_object_s): Use bit flags
(struct aodf_object_s): Ditto. Add field 'fid'.
(struct prkdf_object_s): Ditto. Add fields keygrip, keyalgo, and
keynbits.
(parse_certid): Allow a keygrip instead of a certid aka keyref.
(read_ef_aodf): Store the FID.
(keygripstr_from_prkdf): Rename to ...
(keygrip_from_prkdf): this. Remove arg r_gripstr and implement cache.
Change callers to directly use the values from the object. Also store
the algo and length of the key ion the object.
(keyref_from_keyinfo): New. Factored out code.
(do_sign): Support SHA-256 and >2048 bit RSA keys.
(do_with_keygrip): New.
(app_select_p15): Register new function.
--
This has been tested with a D-Trust card featuring 3072 bit keys.
Note that non-repudiation key for a qualified signature does not yet
work because we do not yet support rsaPSS padding. Thus a gpgsm
--learn shows a couple of Bad Signature errors for this key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/iso7816.c (iso7816_read_binary): Factor code out to ...
(iso7816_read_binary_ext): new function. Add arg extended_mode.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
This removes almost all log_debug calls and uses opt.verbose and
log_info to show card information. Also avoid too long and thus
harder to read lines.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-p15.c (read_ef_odf): Detect the home_DF on the fly. Silence
the garbage warning for null bytes.
(print_tokeninfo_tokenflags): New.
(read_ef_tokeninfo): Print manufacturer, label, and flags.
(app_select_p15): No need to use the app_get_slot macro.
(CARD_TYPE_CARDOS_50): New const.
(card_atr_list): Detect CardOS 5.0
--
The card under test is a "Test-Signaturkarte D-TRUST Card 3.1" for a
mere 49 Euro and no specs available. D-Trust is a branch of the
German Bundesdruckerei. Compare that to Telesec and Yubikey who have
always been nice enough to send bunches of sample cards without a need
to wade through lots of forms and not even asking for money. Guess
which cards I prefer.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (check_keyidstr): Add optional arg r_use_auth to
test also for OpenPGP.3.
(do_sign): Enable that new mode.
--
This is very useful to allow gpgsm to use a certificate based on the
OpenPGP card's authentication key. That key is usually used for ssh
but it makes sense to use it also for user certificate based
authentication.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app-openpgp.c (do_setattr): For setting KDF DO, support standard
OpenPGP card, which needs to update PIN.
GnuPG-bug-id: 3891
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/scdaemon.c: Switch to the new option parser and enable a global
conf file.
* dirmngr/dirmngr.c: Ditto.
* g13/g13.c: Ditto.
* g13/g13-syshelp.c: Ditto. Do not force verbose mode.
* dirmngr/dirmngr_ldap.c: Switch to the new option parser.
* dirmngr/dirmngr-client.c: Switch to the new option parser.
--
This finalizes the switch to the new option parser. What's left is to
remove the old argparser code from common.
g13-syshelp does not anymore default to --verbose because that can now
be enabled in /etc/gnupg/g13-syshelp.conf.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* scd/app.c (send_serialno_and_app_status): Add fallback.
--
The app list was only printed for apps which support the with_keygrip
function. That is not the case for the netkey and otehr cards. The
new fallback prints the actual app name.
Signed-off-by: Werner Koch <wk@gnupg.org>
