* g13/g13.c (oNoMount): New.
(opts): Add --no-mount.
(main): Implement this.
* g13/g13-common.h (opt): Add field no_mount.
* common/status.h (STATUS_PLAINDEV): New.
* g13/sh-cmd.c (has_option): Uncomment.
(cmd_mount): Add option --no-mount and pass down.
* g13/sh-dmcrypt.c (sh_dmcrypt_mount_container): Add arg nomount and
emit PLAINDEV status line.
(sh_dmcrypt_umount_container): Rund findmnt before umount.
--
This option can be used to decrypt a device but not to mount it. For
example to run fsck first. A command or option to run fsck before a
mount will eventually be added.
The use of findmnt is needed so that we can easily remove a device
which has not been mounted.
* scd/scdaemon.c: Switch to the new option parser and enable a global
conf file.
* dirmngr/dirmngr.c: Ditto.
* g13/g13.c: Ditto.
* g13/g13-syshelp.c: Ditto. Do not force verbose mode.
* dirmngr/dirmngr_ldap.c: Switch to the new option parser.
* dirmngr/dirmngr-client.c: Switch to the new option parser.
--
This finalizes the switch to the new option parser. What's left is to
remove the old argparser code from common.
g13-syshelp does not anymore default to --verbose because that can now
be enabled in /etc/gnupg/g13-syshelp.conf.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (my_log_monitor): New var.
(my_libassuan_log_handler): Run that monitor.
(setup_libassuan_logging): Add arg to set a log monitor and change all
callers.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/preset-passphrase.c, agent/protect-tool.c, dirmngr/dirmngr.c
* dirmngr/t-http.c, g10/gpg.c, g10/gpgv.c, g13/g13-syshelp.c
* g13/g13.c, kbx/kbxutil.c, scd/scdaemon.c, sm/gpgsm.c
* tests/gpgscm/main.c, tools/gpg-check-pattern.c
* tools/gpg-connect-agent.c, tools/gpgconf.c, tools/gpgtar.c
* tools/symcryptrun.c: Invoke log_set_prefix() with
human-readable labels.
--
Some invocations of log_set_prefix() were done with raw numeric values
instead of values that humans can understand. Use symbolic
representations instead of numeric for better readability.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/init.c (init_common_subsystems): Initialize libgcrypt.
* dirmngr/Makefile.am (dirmngr_ldap): Link with libgcrypt.
--
Most other modules already call gcry_check_version() after
init_common_subsystems() so may as well move initialization of libgcrypt
to here. Also fixes a warning in the system log from gpgconf --homedir.
Signed-off-by: Ben Kibbey <bjk@luxsci.net>
* g13/g13.c (aSuspend, aResume): New.
(opts): Add commands --suspend and --resume.
(main): Implement dummy command aUmount. Implement commands aResume
and aSuspend.
* g13/sh-cmd.c (cmd_suspend): New.
(cmd_resume): New.
(register_commands): Add commands RESUME and SUSPEND.
* g13/server.c (cmd_suspend): New.
(cmd_resume): New.
(register_commands): Add commands RESUME and SUSPEND.
* g13/be-dmcrypt.c (be_dmcrypt_suspend_container): New.
(be_dmcrypt_resume_container): New.
* g13/backend.c (be_suspend_container): New.
(be_resume_container): New.
* g13/suspend.c, g13/suspend.h: New.
* g13/mount.c (parse_header, read_keyblob_prefix, read_keyblob)
(decrypt_keyblob, g13_is_container): Move to ...
* g13/keyblob.c: new file.
(keyblob_read): Rename to g13_keyblob_read and make global.
(keyblob_decrypt): Rename to g13_keyblob_decrypt and make global.
* g13/sh-dmcrypt.c (check_blockdev): Add arg expect_busy.
(sh_dmcrypt_suspend_container): New.
(sh_dmcrypt_resume_container): New.
* g13/call-syshelp.c (call_syshelp_run_suspend): New.
(call_syshelp_run_resume): New.
--
The --suspend command can be used before a hibernate operation to make
the encrypted partition inaccessible and wipe the key from the memory.
Before --suspend is called a sync(1) should be run to make sure that
their are no dirty buffers (dmsetup, as called by g13, actually does
this for you but it does not harm to do it anyway. After the
partition has been suspended a
echo 3 >proc/sys/vm/drop_caches
required to flush all caches which may still have content from the
encrypted partition.
The --resume command reverses the effect of the suspend but to do this
it needs to decrypt again. Now, if the .gnupg directory lives on the
encrypted partition this will be problematic because due to the
suspend all processes accessing data on the encrypted partition will
be put into an uninterruptible sleep (ps(1) shows a state of 'D').
This needs to be avoided. A workaround is to have a separate GnuPG
home directory (say, "~/.gnupg-fallback") with only the public keys
required to decrypt the partition along with a properly setup
conf files. A
GNUPGHOME=$(pwd)/.gnupg-fallback g13 --resume
should then be able to resume the encrypted partition using the
private key stored on a smartcard.
The implementation is pretty basic right now but useful to me.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/be-dmcrypt.c, g13/be-dmcrypt.h: New.
* g13/Makefile.am (g13_SOURCES): Add them.
* g13/backend.c: Include be-dmcrypt.h and call-syshelp.h.
(no_such_backend): Rename to _no_such_backend and provide replacement
macro.
(be_is_supported_conttype): Support DM-Crypt.
(be_take_lock_for_create): Call set_segvice for DM-Crypt.
(be_create_new_keys): Make it a dummy for DM-Crypt.
(be_create_container): Call be_dmcrypt_create_container.
(be_mount_container): call be_dmcrypt_mount_container.
* g13/g13-syshelp.c (main): Enable verbose mode.
* g13/g13tuple.c (get_tupledesc_data): New.
* g13/g13tuple.h (unref_tupledesc): New.
* g13/g13.h (server_control_): Add field "recipients".
* g13/g13.c (main): Fix setting of recipients via cmdline.
(g13_deinit_default_ctrl): Release recipients list.
(g13_request_shutdown): New. Replace all direct update of
shutdown_pending by calls this function.
* g13/server.c (server_local_s): Remove field recipients which is now
part of CTRL.
(reset_notify, cmd_recipient, cmd_create): Adjust for this change.
* g13/create.c (encrypt_keyblob): Rename to g13_encrypt_keyblob.
(g13_create_container): Support DM-Crypt.
* g13/mount.c (parse_header): Allow for meta data copies.
(g13_mount_container): Support DM-Crypt.
* g13/sh-cmd.c (cmd_create): Make it work.
(cmd_mount): New.
* g13/sh-dmcrypt.c (sh_dmcrypt_create_container): Make it work.
(sh_dmcrypt_mount_container): New.
--
With this patch we can now create an encrypted partition and partly
mount it (i.e. setup keys and create the mapped device). We do not yet
create a file system or mount that file system
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13-common.c, g13/g13-common.h: New.
* g13/Makefile.am (g13_SOURCES): Add new files.
* g13/g13.c (g13_errors_seen): Move to g13-common.c.
(cmdline_conttype): New.
(main): Use g13_init_signals and g13_install_emergency_cleanup.
(emergency_cleanup, g13_exit): Move to g13-common.c.
* g13/g13.h: Move OPT and some other code to g13-common.h.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g13/g13.c: Make use of debug_parse_flag.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto
* agent/gpg-agent.c: Ditto. But do not terminate on "help"
* dirmngr/dirmngr.c: Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
Replace hardwired strings at many places with new macros from config.h
and use the new strusage macro replacement feature.
* common/asshelp.c (lock_spawning) [W32]: Change the names of the spawn
sentinels.
* agent/command.c (cmd_import_key): Use asprintf to create the prompt.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
GnuPG requires that options are given before other arguments. This
can sometimes be confusing. We now print a warning if we found an
argument looking alike a long option without being preceded by the
stop option. This is bug#1343.
* common/argparse.h (ARGPARSE_FLAG_STOP_SEEN): New.
* common/argparse.c (arg_parse): Set new flag.
* g10/gpg.c (main): Print the warning.
* agent/gpg-agent.c (main): Ditto.
* dirmngr/dirmngr.c (main): Ditto.
* g13/g13.c (main): Ditto.
* scd/scdaemon.c (main): Ditto.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
For the shared code parts it is cumbersome to pass an error sourse
variable to each function. Its value is always a constant for a given
binary and thus a global variable makes things a lot easier than the
former macro stuff.
* common/init.c (default_errsource): New global var.
(init_common_subsystems): Rename to _init_common_subsystems. Set
DEFAULT_ERRSOURCE.
* common/init.h: Assert value of GPG_ERR_SOURCE_DEFAULT.
(init_common_subsystems): New macro.
* common/util.h (default_errsource): Add declaration.
* kbx/keybox-defs.h: Add some GPG_ERR_SOURCE_DEFAULT trickery.
* agent/gpg-agent.c (get_agent_ssh_socket_name): Use
INVALID_HANDLE_VALUE instead of 0.
(handle_signal) [!HAVE_W32_SYSTEM]: Don't define.
(handle_connections): Port Windows code to NPTH.
* dirmngr/dirmngr.c (handle_connections): Port Windows code to NPTH.
* g13/g13.c (handle_connections): Port Windows code to NPTH.
* scd/scdaemon.c (handle_connections): Port Windows code to NPTH.
* common/dotlock.c (use_hardlinks_p, dotlock_take_unix): Check return
value of link().
* g13/g13.c: Make sure err is initialized.
* scd/scdaemon.c (main) [!USE_GCRY_THREAD_CBS]: Do not define ERR.
* agent/gpg-agent.c, dirmngr/dirmngr.c, g13/g13.c, scd/scdaemon.c
(USE_GCRY_THREAD_CBS): New macro, defined if
GCRY_THREAD_OPTION_VERSION is 0.
(fixed_gcry_pth_init) [!USE_GCRY_THREAD_CBS]: Don't define.
(main) [!USE_GCRY_THREAD_CBS]: Do not install thread callbacks.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
Werner Koch