* agent/agent.h (PINENTRY_STATUS_PASSWORD_GENERATED): New.
(MAX_GENPIN_TRIES): Remove.
* agent/call-pinentry.c (struct entry_parm_s):
(struct inq_cb_parm_s): Add genpinhash and genpinhas_valid.
(is_generated_pin): New.
(inq_cb): Suppress constraints checking for a generated passphrase.
No more need for several tries to generate the passphrase.
(do_getpin): Store a generated passphrase/pin in the status field.
(agent_askpin): Suppress constraints checking for a generated
passphrase.
(agent_get_passphrase): Ditto.
* agent/command.c (cmd_get_passphrase): Ditto.
--
A generated passphrase has enough entropy so that all kind of extra
checks would only reduce the actual available entropy. We thus detect
if a passphrase has been generated (and not changed) and skip all
passphrase constraints checking.
* agent/call-pinentry.c (DEFAULT_GENPIN_BYTES): Replace by ...
(DEFAULT_GENPIN_BITS): this and increase to 150.
(generate_pin): Make sure that we use at least 128 bits.
* agent/call-pinentry.c: Remove unused assert.h.
(inq_cb): Fix use use of assuan_end_confidential in case of nested
use.
(do_getpin): Ditto.
(setup_formatted_passphrase): Escape the help string.
(setup_enforced_constraints): Ignore empty help strings.
--
(Ported from 2.2)
* agent/gpg-agent.c (oCheckSymPassphrasePattern): New.
(opts): Add --check-sym-passphrase-pattern.
(parse_rereadable_options): Set option.
(main): Return option info.
* tools/gpgconf-comp.c: Add new option.
* agent/agent.h (opt): Add var check_sym_passphrase_pattern.
(struct pin_entry_info_s): Add var constraints_flags.
(CHECK_CONSTRAINTS_NOT_EMPTY): New to replace a hardwired 1.
(CHECK_CONSTRAINTS_NEW_SYMKEY): New.
* agent/genkey.c (check_passphrase_pattern): Rename to ...
(do_check_passphrase_pattern): this to make code reading
easier. Handle the --check-sym-passphrase-pattern option.
(check_passphrase_constraints): Replace arg no_empty by a generic
flags arg. Also handle --check-sym-passphrase-pattern here.
* agent/command.c (cmd_get_passphrase): In --newsymkey mode pass
CHECK_CONSTRAINTS_NEW_SYMKEY flag.
* agent/call-pinentry.c (struct entry_parm_s): Add constraints_flags.
(struct inq_cb_parm_s): New.
(inq_cb): Use new struct for parameter passing. Pass flags to teh
constraints checking.
(do_getpin): Pass constraints flag down.
(agent_askpin): Take constrainst flag from the supplied pinentry
struct.
--
Requirements for a passphrase to protect a private key and for a
passphrase used for symmetric encryption are different. Thus a
the use of a different pattern file will be useful. Note that a
pattern file can be used to replace the other passphrase constraints
options and thus we don't need to duplicate them for symmetric
encryption.
GnuPG-bug-id: 5517
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): Change type of pinentry_formatted_passphrase
to int (as for other flags).
* agent/call-pinentry.c (setup_formatted_passphrase): Remove no longer
needed translated strings. Write option without value to Assuan
connection.
* agent/gpg-agent.c (opts): Use ARGPARSE_s_n for
oPinentryFormattedPassphrase.
(parse_rereadable_options): Set option to 1.
--
GnuPG-bug-id: 5553, 5517
* agent/call-pinentry.c (inq_cb): Handle checkpin inquiry.
(setup_enforced_constraints): New.
(agent_get_passphrase): Call setup_enforced_constraints if new
passphrase is requested.
--
This implements the gpg-agent side for checking whether a new passphrase
entered by the user in pinentry satisfies the passphrase constraints.
Performing a checkpin inquiry is only allowed if the passphrase
constraints are enforced. setup_enforced_constraints sends necessary
options and translated strings to pinentry.
GnuPG-bug-id: 5517, 5532
* agent/cvt-openpgp.c (do_unprotect): Only modify SKEY when it is
correctly decrypted.
--
GnuPG-bug-id: 5122
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_genkey): Use goto instead of return.
* agent/cvt-openpgp.c (convert_from_openpgp_main): Ditto.
* agent/genkey.c (agent_ask_new_passphrase): Fix typo to free correct
pointer
(agent_genkey): Release memory
* agent/gpg-agent.c (check_own_socket): Free sockname
* agent/protect-tool.c (read_key): Free buf.
(agent_askpin): Free passphrase
--
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Changed original patch to not add a free before a GPG_ERR_BUG.
Signed-off-by: Werner Koch <wk@gnupg.org>
GnuPG-bug-id: 5393
* agent/command.c (cmd_keyinfo): Factor some code out to ...
(get_keyinfo_on_cards): ... new.
(cmd_havekey): Add --list mode.
* g10/gpg.h (struct server_control_s): Add new caching vars.
* g10/gpg.c (gpg_deinit_default_ctrl): Release cache.
* g10/call-agent.c (agent_probe_any_secret_key): Init and try to use
the keygrip cache.
(agent_genkey): Clear the cache.
(agent_import_key): Ditto.
* g10/keylist.c (list_all, list_one): Pass ctrl to
agent_probe_any_secret_key.
* g10/getkey.c (lookup): Ditto.
--
With this change we first ask the agent for a list of all secret
keygrips and use that list instead of asking the agent for each public
key. Speeds up my "gpg -K" with a lot of secret and public keys by
more than 25%.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_request_identities): Remove double
check of ERR.
* g10/getkey.c (get_pubkey_byname): Remove double use of break.
* g10/pkglue.c (pk_encrypt): Handle possible NULL-ptr access due to
failed malloc.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_readkey): Add option --no-data and special
handling for $SIGNKEYID and $AUTHKEYID.
* g10/call-agent.c (agent_scd_getattr): Create shadow keys for KEY-FPR
output.
* g10/skclist.c (enum_secret_keys): Automagically get a missing public
key for the current card.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_request_identities): Skip unknown
curves.
--
For example when using my standard ed25519 token and testing cards
with only Brainpool support, the ssh-agent failed due to the unknown
curves seen on the card. This patches fixes this by ignoring keys
with unknown curves.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (agent_pksign_do): Support ECC and DSA verification
and print some debug info in the error case.
--
Note that the addition of do_encode_dsa has no immediate effect
because we use the code only for RSA. However, for debugging it can
be useful to change the code to check also other created signatures.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_keytotpm): New.
(agent/command.c): Register new command KEYTOTPM.
* g10/call-agent.c (agent_keytotpm): New.
* g10/keyedit.c (cmdKEYTOTPM): New command "keytotpm".
(keyedit_menu): Implement.
--
The plumbing is done in two parts: the agent is modified to understand
a KEYTOTPM assuan command taking the key grip as an argument. This
simply obtains the key s expression and calls the existing writeky
diversion to the tpm2daemon. The daemon reponds with the TPM
conversion of the key and that key is then stored in the keyfile as a
shadowed-private-key with "tpm2-v1" type.
To effect the conversion, all the user does from gpg --edit-key is
select which private key they wish to move (or move the primary if no
key is selected) and type keytotpm. The conversion to TPM form is
instantaneous and once converted, the actual key cannot be recovered,
meaning that if you want your gpg key to move to a new laptop you must
keep an unconverted backup copy in a safe location.
When you do a list command, all TPM keys show up as
card-no: TPM-Protected
The key is stored encrypted to the TPM2 storage seed and since each
TPM has a unique seed, only the single TPM contained in your laptop
can now read the key. This means you cannot simply copy the shadowed
key file over to a new laptop, you must copy over the backup copy and
then convert it to TPM form on the new laptop.
To decomission your laptop, execute a tssclear command which
regenerates the storage seed and effectively shreds all keys. Note
when you have done this *every* TPM2 shadowed private key becomes
unreadable by any TPM and all are effectively destroyed.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Very minor cosmetic changes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-tpm2d.c: New.
* divert-tpm2.c: New.
* agent/Makefile.am: Add new files.
* agent/agent.h (DAEMON_TPM2D): New. Add stub fucntions.
* agent/call-daemon.c (GNUPG_MODULE_NAME_TPM2DAEMON): New.
* agent/command.c (do_one_keyinfo): Handle tpmv2.
* agent/gpg-agent.c (oTpm2daemonProgram): New.
(opts): New option --tpm2daemon-program.
(parse_rereadable_options): Handle option.
* agent/pkdecrypt.c (agent_pkdecrypt): Divert to tpm2d.
(agent_pksign_do): Ditto.
---
A new shadow key type: "tpm2-v1" is introduced signalling that the
shadowed key is handled by the tpm2daemon. A function to identify
this type is introduced and diversions to the tpm2daemon functions are
conditioned on this function for pkign and pkdecrypt where the same
diversions to scd are currently done. The (info) field of the
shadowed key stores the actual TPM key. The TPM key is encrypted so
only the physical TPM it was created on can read it (so no special
protection is required for the info filed), but if the (info) field
becomes corrupt or damaged, the key will be lost (unlike the token
case, where the key is actually moved inside the token).
Note, this commit adds handling for existing TPM format shadow keys,
but there is still no way to create them.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Additional changes:
* Add ChangeLog entries.
* Some minor indentation fixes.
* agent/Makefile.am (gpg_agent_SOURCES): Change to make distcheck
work.
* agent/agent.h [!HAVE_LIBTSS]: Do not return -EINVAL but an
gpg_error_t. Mark args as unused.
* agent/protect.c (agent_is_tpm2_key): Free BUF.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-daemon.c (struct wait_child_thread_parm_s) [W32]: Do not
use HANDLE for pid_t.
(wait_child_thread): Ditto.
--
Mingw has its own definition of pid_t as does libassuan. We should use
this instead of using HANDLE. Things are a bit complicated in
Windows, because Windows also has a pid_t but that is mostly useless;
in particular because you can't wait on a real pid but need a handle.
* common/session-env.c (session_env_list_stdenvnames): Extend to allow
return all names as one string.
* agent/command-ssh.c (SSH_REQUEST_EXTENSION): New.
(SSH_RESPONSE_EXTENSION_FAILURE): New.
(request_specs): Add handler for the extension command.
(ssh_handler_extension): New.
--
The extension mechanism is specified in
https://tools.ietf.org/html/draft-miller-ssh-agent-04
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac: Require at least Libgcrypt 1.9.0. Remove all
GCRYPT_VERSION_NUMBER dependent code.
--
Only Libgcrypt 1.9 implements EAX which is a mandatory algorithm in
RFC4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pkdecrypt.c (agent_pkdecrypt): Support decryption with card
but without a stub key.
--
GnuPG-bug-id: 5170
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (generate_pin): Use STRING random which is
sufficient for a passphrase.
(inq_cb): s/rc/err/. Do not print two errors in case generate_pin
fails. Lowercase strings as per GNU standards.
(setup_genpin): Fix translation test.
(setup_qualitybar): Ditto.
--
Our policy is to use VERY_STRONG for a long term public key but not
for symmetric keys.
The GNU standards to demand that strings start with a lowercase
because that seems to be needed if it follows a prefix of for example
"gpg:". I don't actually like this becuase we need different strings
in interactive and standard mode but the majory of strings in GnuPGare
written this way. If a translation is necessary it can be done with
an en_GB or so locale.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Setup genpin.
(do_getpin): Update with new name for inquire callback.
(inq_quality): Rename to inq_cb and add genpin support.
(inq_cb): Renamed form inq_quality.
(generate_pin): New helper to generate a pin.
(agent_askpin): Fix some typos.
(setup_genpin): Provide new strings for pinentry.
--
This implements the gpg-agent side for generating a pin
especially for symmetric encryption using libgcrypt randomness
and checking it against the gpg-agent constraints.
* common/sysutils.h (struct gnupg_dirent_s): New.
* common/sysutils.c: Include dirent.h.
(struct gnupg_dir_s): New.
(gnupg_opendir, gnupg_readdir, gnupg_closedir): New. Change all
callers of opendir, readdir, and closedir to use these functions.
--
GnuPG-bug-id: 5098
* common/sysutils.c (gnupg_stat): New.
* common/sysutils.h: Include sys/stat.h.
--
Yet another wrapper for Unicode support on Windows.
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
* scd/app-openpgp.c (send_keypair_info): Emit the algo string as part
of a KEYPAIRINFO.
* scd/command.c (do_readkey): Ditto.
* scd/app-piv.c (do_readkey): Ditto.
* scd/app-nks.c (do_learn_status_core): Ditto.
(struct fid_cache_s): Add field algostr.
(flush_fid_cache): Release it.
(keygripstr_from_pk_file): Fill it and add it to the cache. Use a
single exit label.
* scd/app-help.c (app_help_get_keygrip_string_pk): Add new arg
r_algostr. Change all callers.
--
This is helpful so that callers do not need to parse the key for this
basic information. Use "scd readkey --info-only" to return the info
status line instead of the key material; using just --info returns the
info in addition to the key material.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.h (split_fields): Use const * for the strings in
the ARRAY.
(split_fields_colon): Likewise.
* common/stringhelp.c (split_fields, split_fields_colon): Fix
the implementation.
* agent/call-scd.c, agent/command.c: Follow the change.
* common/t-stringhelp.c, dirmngr/loadswdb.c: Likewise.
* g10/call-agent.c, tools/card-call-scd.c: Likewise.
* tools/card-yubikey.c, tools/gpg-card.c: Likewise.
* tools/gpg-card.h, tools/gpg-wks-client.c: Likewise.
* tools/gpgconf-comp.c, tools/gpgconf.c: Likewise.
* tools/wks-util.c: Likewise.
--
The strings in the ARRAY don't need to be released by caller, as those
are references. It's easier to follow the code when it's explicitly
const *.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_sethash): Add option --pss and allow for
--hash=null.
* agent/agent.h (struct server_control_s): Add digest.is_pss and
zero where needed.
* agent/pksign.c (agent_pksign_do): Allow for PSS with cards.
* scd/command.c (cmd_pksign): Add for --hash=none.
--
This is not a full implementaion of PSS but allows scdaemon card
drivers to detect already PSS formatted data.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (start_pinentry): Don't use pid_t.
--
When pid_t is 64-bit integer and unsigned long is 32-bit,
it never matches, because left hand side does not fill
upper 32-bit.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_get_passphrase): Never repeat in loopback mode;
same as with !OPT_NEWSYMKEY.
--
In loopback mode there shall not be any repeat because the caller is
expected to do any confirmation before passing a new passphrase to
gpg.
Fixes-commit: eace4bbe1d
GnuPG-bug-id: 4991
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/genkey.c (agent_ask_new_passphrase): No qualitybar.
* g10/call-agent.c (agent_get_passphrase): Ditto.
* sm/call-agent.c (gpgsm_agent_ask_passphrase): Ditto.
--
The concept of a passphrase quality indicator is anyway questionable
because user are smart enough to trick them out and they also tend to
limit the actually used entropy.
Except for the red/green switching (to show whether constraints are
fulfilled) our qualitybar is pretty bad and thus worse than none.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (agent_get_passphrase): Add arg pininfo.
* agent/genkey.c (check_passphrase_constraints): New arg no_empty.
* agent/command.c (reenter_passphrase_cmp_cb): New.
(cmd_get_passphrase): Add option --newsymkey.
--
This new option allows to present a passphrase with the usual repeat
box as it is used by gpg-agent's internal key generation.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-scd.c: Factor re-usable code out to ...
* agent/call-daemon.c: new. Store infos in an array to allow for
other backend daemons.
* agent/Makefile.am (gpg_agent_SOURCES): Add new file.
* agent/agent.h: Include assuan.h.
(enum daemon_type): New.
(opt): Replace scdaemon_program by daemon_program array. Replace
scd_local by a array d_local. Change users accordingly.
--
The model I'm using for a TPM daemon is the current scdaemon. That
includes start and stop handlers plus liveness checks and an assuan
socket generator. To avoid massive code duplication (and save me a
lot of effort), I've elected to strip this code out of call-scd.c into
a generic framework which can then be reused as is by the TPM handling
daemon.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Co-authored-by: Werner Koch <wk@gnupg.org>
Modified original patch for 2.2 heavily to fit the new framework used
in master (gnupg 2.3)
Signed-off-by: Werner Koch <wk@gnupg.org>
--
For TPM support it is necessary to indroduce another type of shadow
key, so allow other agent functions to extract the type so they can
make the right decisions based on it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Minor editorial changes by wk
* agent/pksign.c (do_encode_eddsa): First argument is NBITs,
so that it can support Ed448, as well as Ed25519.
(agent_pksign_do): Follow the change.
* agent/sexp-secret.c (fixup_when_ecc_private_key): No fix-up needed
for Ed448, it's only for classic curves.
* common/openpgp-oid.c (oidtable): Add Ed448.
* common/sexputil.c (get_pk_algo_from_key): Ed448 is only for EdDSA.
* g10/export.c (match_curve_skey_pk): Ed448 is for EdDSA.
* g10/keygen.c (gen_ecc): Support Ed448 with the name of "ed448".
(ask_algo, parse_key_parameter_part): Handle "ed448".
* g10/pkglue.c (pk_verify): Support Ed448.
(pk_check_secret_key): Support Ed448.
* g10/sign.c (hash_for): Defaults to SHA512 for Ed448.
(make_keysig_packet): Likewise.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/findkey.c (agent_is_eddsa_key): Remove dead case.
--
There is no possibility the call of key_parms_from_sexp returns
"eddsa".
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/cvt-openpgp.c (scan_pgp_format): New with SOS support.
(do_unprotect): Use scan_pgp_format, handle opaque MPI for ECC.
(convert_from_openpgp_main): Use opaque MPI for ECC.
(apply_protection): Set GCRYMPI_FLAG_USER1 flag for encrypted secret.
(extract_private_key): Use "/qd" for ECC, opaque MPI.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (struct server_control_s): Add field digest.data.
* agent/gpg-agent.c (agent_deinit_default_ctrl): Free that field.
* agent/command.c (reset_notify): Ditto.
(start_command_handler): ditto.
(cmd_sethash): Add new option --inquire.
* agent/call-scd.c (agent_card_pksign): For now return an error if
inquire mode was used.
* agent/command-ssh.c (ssh_handler_sign_request): Make sure
digest.data is cleared.
* agent/divert-scd.c (divert_pksign): Implement inquire mode.
* agent/pksign.c (agent_pksign_do): Ditto.
--
This is required to support EdDSA according to RFC8410.
GnuPG-bug-id: 4888
* agent/protect-tool.c (read_key): Detect simple extended key format.
--
This is a quick hack to get a useful error messages. The real fix is
to replace the protect tool by a more useful new tool.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/gc-opt-flags.h (GC_OPT_FLAG_RUNTIME): Move to ...
* tools/gpgconf-comp.c: here.
(known_options_scdaemon): Remove "options".
(known_options_dirmngr): Remove "options".
(known_options_gpgsm): Remove "options".
(known_options_gpg): Remove "options" and "keyserver".
(struct gc_option_s): Rename active t gpgconf_list.
(gc_component_list_options): Do not act upon active.
(option_check_validity): Ditto.
(is_known_option): Make it work correctly for unknown options.
(retrieve_options_from_program): Use renamed flag gpgconf_list only to
detect duplicated items from --gpgconf-list. Do not set runtime.
Only e set the options if set by --gpgconf-list; never clear them.
* agent/gpg-agent.c: Simplify the --gpgconf-list output.
* dirmngr/dirmngr.c: Ditto.
* g10/gpg.c: Ditto.
* kbx/keyboxd.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* tests/openpgp/gpgconf.scm: Use "compliance" instead of "keyserver"
for the string arg test.
--
There is no need to read the list of options from the components
unless they convey a default value. It is better to consult only the
list we have in gpgconf-comp.c to decide on whether an option should
be displayed. Right, this might mess up thing if a newer gpgconf
version is used with an older component, but we already print warnings
in this case and in general we do not want to support this anymore -
the times of gpg 1.4. and 2.0 are long over now.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oGreeting): Remove non existant dummy option.
--
This looks better and is also required for further simplifications of
gpgconf.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c: Remove all regular option descriptions. They
are now read in from the component. Also remove a few meanwhile
obsolete options.
* agent/gpg-agent.c: Add option description which were only set in
gpgconf-comp.c.
* dirmngr/dirmngr.c: Ditto.
* scd/scdaemon.c: Ditto.
* sm/gpgsm.c: Ditto.
* g10/gpg.c: Ditto.
--
This second part removes all regular option descriptions because they
can be read from the components. A few were missing in the components
and thus moved to there.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (reread_configuration): Use a two-part config
file.
* dirmngr/dirmngr.c (reread_configuration): Ditto.
--
If --options is used to to set a specific options file, this file and
not the default file needs to be re-read on SIGHUP.
GnuPG-bug-id: 4788
* g10/gpgv.c: Use new option parser.
* sm/gpgsm.c: Ditto.
* agent/gpg-agent.c: Ditto.
(opts): Add option --no-options.
--
This is the next part of changes. The latest libgpg-error is required
so that that re-reading options (SIGHUP) works.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/call-scd.c (agent_card_serialno): Allow NULL for R_SERIAL.
(struct readkey_status_parm_s): New.
(readkey_status_cb): New.
(agent_card_readkey): Add optional arg R_KEYREF and change all
callers.
* agent/findkey.c (key_parms_from_sexp): Allow also a "public-key".
* agent/divert-scd.c (ask_for_card): Allow for SHADOW_INFO being NULL.
* agent/pksign.c (agent_pksign_do): Fallback to sign with an on-card
if there is no stub key yet. Create the stub key. Also fixed a
misnaming between s_pkey and s_skey.
--
This change allows to create OpenPGP keys directly from a card without
first making sure that a stub key exists. It is also the less
surprising behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (struct server_local_s): Add last_card_keyinfo.
(eventcounter): Add maybe_key_change.
(cmd_genkey, cmd_scd, cmd_import_key, cmd_delete_key): Bump new
counter.
(cmd_keyinfo): Cache the keyinfo from the card.
(start_command_handler): Release the cache.
--
This cache speeds up processing of commands like "gpg -K" because
scdaemon does not need to be asked for each key as long as nothing
changed with the card.
We should have a better notification service from scdaemon to make
sure that we get only the relevant events. What we do right now is a
bit course but sufficient.
Signed-off-by: Werner Koch <wk@gnupg.org>
* scd/app.c (maybe_switch_app): Factor reselect code out to ...
(run_reselect): new.
(app_write_learn_status): Tweak diagnostics.
(app_do_with_keygrip): Run reselect if a card has more than one
switchable application.
* agent/call-scd.c (agent_card_serialno): Ditto.
* tools/card-call-scd.c (start_agent): Use option --all with SERIALNO.
(scd_serialno): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (card_key_available): Supply KEYINFO argument.
Call agent_card_readkey by KEYGRIP of KEYINFO.
Don't use $AUTHKEYID, but IDSTR of KEYINFO.
(ssh_handler_request_identities): Follow the change of
card_key_available.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-scd.c (handle_pincache_put): Do not decrypt.
(handle_pincache_get): New.
(inq_needpin): Call it.
* scd/command.c (set_key_for_pincache): New.
(pincache_put): Restructure and set key.
(pincache_get): Ditto.
--
This change does away with encrypting and decrypting the cached PIN in
the agent. There is no need for this we can simply cache the
cryptogram and let scdaemon decrypt after retrieving it from the
agent. This way we do not need to share a key between gpg-agent and
scdaemon and further the cached content is invalid after the scdaemon
process has been replaced.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (atfork_cb): Factor code out to ...
(atfork_core): new.
--
We convey certain envvars directly via the environment to Pinentry and
thus they don't show up in the Assuan logging. Because we better
don't call a logging function in an atfork handle, this patch splits
the code up and uses the same code to display what was done in at fork
after the connection has been established.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/divert-scd.c (ask_for_card): Don't use SERIALNO to select
card, but use KEYGRIP.
GnuPG-bug-id: 4695
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (watch_sock_start): Factor out
from do_getpin.
(watch_sock_end): Likewise.
(do_getpin): Use those functions.
(agent_get_confirmation): Likewise.
(popup_message_thread): Likewise.
--
Pinentry's dialog for confirmation should be also closed cleanly, as
well as the dialog for pin-input.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (start_pinentry): When TERM is none,
don't send OPTION ttytype to pinentry.
--
GnuPG-bug-id: 4137
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_getinfo): Return GPG_ERR_FALSE as boolean False.
* g13/server.c (cmd_getinfo): Ditto.
* sm/server.c (cmd_getinfo): Ditto.
--
GPG_ERR_FALSE was introduced with libgpg-error 1.21 and we now require
a later version for gnupg 2. Thus we can switch to this more
descriptive code.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (do_one_keyinfo): Add ON_CARD argument to put
A-flag.
(cmd_keyinfo): Call agent_card_keyinfo to offer additional information
if it's on card.
--
This is a modification in gpg-agent, intended for better
enum_secret_keys in gpg frontend.
GnuPG-bug-id: 4244
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/pksign.c (do_encode_md): Use ascii_tolower and avoid
uninitalized TMP in the error case.
--
This is just in case libgcrypt ever returns an algorithm name longer
than 15 bytes.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_key_to_protected_buffer): Update
the length by the second call of gcry_sexp_sprint.
--
GnuPG-bug-id: 4502
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (struct card_key_info_s): New.
(divert_pksign, divert_pkdecrypt): New API.
* agent/call-scd.c (card_keyinfo_cb): New.
(agent_card_free_keyinfo, agent_card_keyinfo): New.
* agent/divert-scd.c (ask_for_card): Having GRIP argument,
ask scdaemon with agent_card_keyinfo.
(divert_pksign, divert_pkdecrypt): Ditto.
* agent/pkdecrypt.c (agent_pkdecrypt): Supply GRIP.
* agent/pksign.c (agent_pksign_do): Ditto.
--
We are going to relax the requirment for SERIALNO of card. It's OK,
when a card doesn't have recorded SERIALNO. If a card has a key
with GRIP, it can be used.
GnuPG-bug-id: 2291, 4301
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/findkey.c (agent_public_key_from_file): pass size_t as int to
gcry_sexp_build_array's %b.
--
This is only a problem on big-endian systems where size_t is not the
same size as an int. It was causing failures on debian's s390x,
powerpc64, and sparc64 platforms.
There may well be other failures with %b on those platforms in the
codebase, and it probably needs an audit.
Once you have a key in private-keys-v1.d/$KEYGRIP.key with a comment
or a uri of reasonable length associated with it, this fix can be
tested with:
gpg-agent --server <<<"READKEY $KEYGRIP"
On the failing platforms, the printed comment will be of length 0.
Gnupg-bug-id: 4501
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/findkey.c (has_comment_expando): New.
(agent_key_from_file): Modify DESC_TEXT.
--
A Label entry in the keyfile is always set manually and thus we can
assume that the user wants to have this label in the prompt. In case
the prompt template does not demand a comment this patch appends a
comment to thhe template. This is a common case for on-disk keys used
by gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (linefeed_to_percent0A): New.
(read_key_file): Add optional arg 'keymeta' and change all callers.
(agent_key_from_file): Prefer "Label:" over the comment for protected
keys.
--
If in the extended key format an item
Label: This is my key
is found, "This is my key" will be displayed instead of the comment
intially recorded in the s-expression. This is pretty useful for the
ssh keys because often there is only the original file name recorded
in the comment.
If no Label is found or it is empty the S-expression comment is used.
To show more than one line, the standard name-value syntax can be
used, for example:
Label: The Ssh key
<blank line>
<space>I registered on fencepost.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/findkey.c (write_extended_private_key): Add args serialno and
keyref. Write a Token line if that does not yet exist.
(agent_write_private_key): Add args serialno and keyref and change all
callers.
(agent_write_shadow_key): Skip leading spaces.
* agent/keyformat.txt: Improve extended key format docs.
--
Noet that the extended key forma is the defaqult in 2.3. This patch
is a first step to better handle tokens which carray the same key.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oEnableExtendedKeyFormat): Re-introduce.
(parse_rereadable_options): Handle it in a special way.
* agent/protect.c (agent_protect): Be safe and set use_ocb only to 1
or 0.
* tools/gpgconf-comp.c: Add --enable-extended-key-format again.
--
This is required for backward compatible with profiles.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oDisableExtendedKeyFormat, oNoop): New.
(oEnableExtendedKeyFormat): Remove.
(opts): Make --enable-extended-key-format a dummy option. Add
disable-extended-key-format.
(parse_rereadable_options): Implement oDisableExtendedKeyFormat.
--
Extended key format is supported since vesion 2.1.12 which should have
long been replaced by a newer version inh all installations. Thus for
2.3 we will make use of the extended-key-format by default.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-scd.c (start_scd): Acquire START_SCD_LOCK for
SCD_LOCAL_LIST. Move common case code to fast path.
Release START_SCD_LOCK before calling unlock_scd.
When new CTX is allocated, clear INVALID flag.
(agent_reset_scd): Serialize the access to SCD_LOCAL_LIST by
START_SCD_LOCK.
--
GnuPG-bug-id: 4377
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-piv.c (concat_tlv_list): Add arg 'secure' and adjust
callers.
(writekey_rsa, writekey_ecc): New.
(do_writekey): New.
(do_writecert): Provide a better error message for an empty cert.
(app_select_piv): Register do_writekey.
* scd/iso7816.c (iso7816_send_apdu): New.
* scd/app-common.h (APP_WRITEKEY_FLAG_FORCE): New.
* agent/command.c (cmd_keytocard): Make the timestamp optional.
* tools/card-call-scd.c (inq_writekey_parms): Remove.
(scd_writekey): Rewrite.
* tools/gpg-card.c (cmd_writekey): New.
(enum cmdids): Add cmdWRITEKEY.
(dispatch_command, interactive_loop): Call cmd_writekey.
--
This has been tested with gpgsm and RSA keys. For ECC keys only
partly tested using the sample OpenPGP nistp256 and nistp384 keys
because gpgsm does not yet support ECC certificates and thus we can't
write the certificates to the cert object after a writekey. Note that
they nevertheless show up in "gpgcard list" because gpg-card searches
for them in gpg and gpgsm. However, this does not work completely.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_keytocard): Make timestamp optional. Use
modern parser function.
* agent/call-scd.c (agent_card_writekey): Rename an arg and for
clarity return gpg_error_t instead of int.
* agent/divert-scd.c (divert_writekey): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/pksign.c (agent_pksign_do):
--
It's best to keep same data format by libgcrypt.
For card (due to historical reasons), gpg-agent or scdaemon used to
prefix 0x00 when it starts 0x80, so that it can be parsed signed MPI
as well as unsigned MPI. It used to do nothing for preceding zeros.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/divert-scd.c (divert_pkdecrypt): Skip a flags parameter.
--
The libgcrypt docs say that a "flags" parameter should always be used
in the input of pkdecrypt. Thus we should allow that parameter also
when parsing an s-expression to figure out the algorithm for use with
scdaemon.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-pinentry.c (watch_sock): New.
(do_getpin): Spawn the watching thread.
--
While we don't have npth_cancel (and it's difficult to implement it
correctly), this is a kind of best compromise allowing a thread's
polling when pinentry is active.
GnuPG-bug-id: 2011
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (PINENTRY_STATUS_*): Expose to public.
(struct pin_entry_info_s): Add status.
* agent/call-pinentry.c (agent_askpin): Clearing the ->status
before the loop, let the assuan_transact set ->status. When
failure with PINENTRY_STATUS_PASSWORD_FROM_CACHE, it returns
soon.
* agent/findkey.c (unprotect): Clear the pinentry cache,
when it causes an error.
--
GnuPG-bug-id: 4348
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/passphrase.c (encode_s2k_iterations): Move function to ...
* common/openpgp-s2k.c: new file. Remove default intialization code.
* common/openpgpdefs.h (S2K_DECODE_COUNT): New to keep only one copy.
* g10/call-agent.c (agent_get_s2k_count): Change to return the count
and print an error.
* agent/protect.c: Include openpgpdefs.h
* g10/card-util.c (gen_kdf_data): Adjust for changes
* g10/gpgcompose.c: Include call-agent.h.
(sk_esk): Adjust for changes.
* g10/passphrase (passphrase_to_dek): Adjust for changes.
* g10/main.h (S2K_DECODE_COUNT): Remove macro.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/percent.c (percent_data_escape): Add new args prefix and
plus_escape.
* agent/command.c (cmd_put_secret): Adjust for changed function
* common/t-percent.c (test_percent_data_escape): Extend test for the
prefix.
(test_percent_data_escape_plus): new test for the plus escaping.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (struct ssh_key_type_spec): Add field
alt_curve_name.
(ssh_key_types): Add some alternate curve names.
(ssh_identifier_from_curve_name): Lookup also bey alternative names
and return the canonical name.
(ssh_key_to_blob): Simplify the ECDSA case by using gcry_pk_get_curve
instead of the explicit mapping.
(ssh_receive_key): Likewise. Use ssh_identifier_from_curve_name to
validate the curve name. Remove the reverse mapping because since
GnuPG-2.2 Libgcrypt 1.7 is required.
(ssh_handler_request_identities): Log an error message.
--
This change will make it easier to support other curves, in particular
those from tokens. Libgcrypt has a large list of alias names which we
now use to to make the mapping more flexible.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (s2k_calibration_time): New file global var.
(calibrate_s2k_count): Use it here.
(get_calibrated_s2k_count): Replace function static var by ...
(s2k_calibrated_count): new file global var.
(set_s2k_calibration_time): New function.
* agent/gpg-agent.c (oS2KCalibration): New const.
(opts): New option --s2k-calibration.
(parse_rereadable_options): Parse that option.
--
Note that using an unrelistic high value (like 60000) takes quite some
time for calibration.
GnuPG-bug-id: 3399
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/call-scd.c (unlock_scd): Move lock before accessing IN_USE.
(wait_child_thread): Add log_info for Windows, and fixed log_error
message.
--
The old code is still valid with cooperate threads, but this is
better.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (agent_popup_message_stop): Just kill it.
--
By checking if it's alive or not, we can lower a risk of sending
SIGINT to a wrong process on unusual condition when PID is re-used to
a different process.
That's true, however, since it's alive usually, simply sending SIGINT
is enough here.
Note that here is a race condition for detecting if process is active
or not; A process can die just after being detected alive.
Moreover, when the process of pinentry accidentally died already, it
should have caused return of assuan_transact and the thread of
popup_message_thread likely already set popup_finished=1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command-ssh.c (get_client_info): Turn client_uid into an int.
Fix setting of it in case of a failed getsocketopt.
* agent/command.c (start_command_handler): Fix setting of the pid and
uid for Windows.
--
Fixes-commit: 28aa689058
which obviously was only added to master.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/divert-scd.c (getpin_cb): Support --ack option.
--
We are now introducing "acknowledge button" feature to scdaemon,
so that we can support OpenPGPcard User Interaction Flag.
We will (re)use the mechanism of POPUPPINPADPROMPT for this. Perhaps,
we will change the name of POPUPPINPADPROMPT, since it will be no
longer for PINPAD only.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/call-pinentry.c (initialize_module_call_pinentry): It's an
error when npth_mutex_init returns non-zero.
--
Actually, initialize_module_call_pinentry is only called once from
main. So, this bug had no harm and having the static variable
INITIALIZED is not needed.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/agent.h (CACHE_MODE_DATA): New const.
* agent/cache.c (DEF_CACHE_TTL_DATA): new.
(housekeeping): Tweak for CACHE_MODE_DATA.
(cache_mode_equal): Ditto.
(agent_get_cache): Ditto.
(agent_put_cache): Implement CACHE_MODE_DATA.
* agent/command.c (MAXLEN_PUT_SECRET): New.
(parse_ttl): New.
(cmd_get_secret): New.
(cmd_put_secret): New.
(register_commands): Register new commands.
--
These commands allow to store secrets in memory for the lifetime of
the gpg-agent process.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (start_command_handler): Do not write to
CLIENT_CREDS after an error.
--
assuan_get_peercred is special insofar that it returns a pointer into
CTX. Writing data via this pointer should never be done.
Fixes-commit: 28aa689058
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (agent_copy_startup_env): Replace explicit list
with the standard list.
--
Although the function agent_copy_startup_env is newer than
session_env_list_stdenvnames the latter was not used. When
DBUS_SESSION_BUS_ADDRESS was added to the latter it was forgotten to
add it to the former as well. Having all stdnames here seems to be
the Right Thing (tm) to do.
GnuPG-bug-id: 3947
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command.c (cmd_getinfo): Add sub-command getenv.
* dirmngr/server.c (cmd_getinfo): Ditto.
--
It is sometimes helpful to be able to inspect certain envvars in a
running agent. For example "http_proxy".
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/command-ssh.c (ssh_handler_sign_request): if a flag is passed
during an signature request that we do not know how to apply, return
GPG_ERR_UNKNOWN_OPTION.
--
https://tools.ietf.org/html/draft-miller-ssh-agent-02#section-4.5 says:
If the agent does not support the requested flags, or is otherwise
unable or unwilling to generate the signature (e.g. because it
doesn't have the specified key, or the user refused confirmation of a
constrained key), it must reply with a SSH_AGENT_FAILURE message.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
GnuPG-bug-id: 3880
* agent/command-ssh.c: repoint documentation reference.
--
Damien Miller is now documenting the ssh-agent protocol via the IETF.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* agent/cache.c (agent_put_cache): Add arg 'ctrl' and change all
callers to pass it.
(agent_get_cache): Ditto.
* agent/cache.c (struct cache_items_s): Add field 'restricted'.
(housekeeping): Adjust debug output.
(agent_flush_cache): Ditto.
(agent_put_cache): Ditto. Take RESTRICTED into account.
(agent_get_cache): Ditto.
--
If requests are coming from different sources they should not share the
same cache. This way we make sure that a Pinentry pops up for a
remote request to a key we have already used locally.
GnuPG-bug-id: 3858
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/shareddefs.h (request_origin_t): New.
* common/agent-opt.c (parse_request_origin): New.
(str_request_origin): New.
* agent/command.c (option_handler): Implement new option.
--
This allows to pretend that a request originated from the extra or
browser socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/cache.c (agent_cache_housekeeping): New func.
* agent/gpg-agent.c (handle_tick): Call it.
--
This change mitigates the risk of having cached items in a post mortem
dump.
GnuPG-bug-id: 3829
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp2.c (vprint_assuan_status_strings): New.
(print_assuan_status_strings): New.
* agent/command.c (agent_write_status): Replace by call to new
function.
* dirmngr/server.c (dirmngr_status): Ditto.
* g13/server.c (g13_status): Ditto.
* g13/sh-cmd.c (g13_status): Ditto.
* sm/server.c (gpgsm_status2): Ditto.
* scd/command.c (send_status_info): Bump up N.
--
This fixes a potential overflow if LFs are passed to the status
string functions. This is actually not the case and would be wrong
because neither the truncating in libassuan or our escaping is not the
Right Thing. In any case the functions need to be more robust and
comply to the promised interface. Thus the code has been factored out
to a helper function and N has been bumped up correctly and checked in
all cases.
For some uses this changes the behaviour in the error case (i.e. CR or
LF passed): It will now always be C-escaped and not passed to
libassuan which would truncate the line at the first LF.
Reported-by: private_pers
* agent/command-ssh.c (get_client_info): Use LOCAL_PEERCRED.
--
LOCAL_PEERUID was wrong (while there is LOCAL_PEERUUID).
For FreeBSD and macOS, we can use LOCAL_PEERCRED to get uid.
GnuPG-bug-id: 3757
Fixes-commit: 28aa689058
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* configure.ac: Check ucred.h as well as sys/ucred.h.
* agent/command-ssh.c: Add inclusion of ucred.h.
--
It was T2981, adding ucred.h for Solaris. We also need sys/ucred.h
for FreeBSD and macOS.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/gpg-agent.c (oListenBacklog): New const.
(opts): New option --listen-backlog.
(listen_backlog): New var.
(main): Parse new options.
(create_server_socket): Use var instead of 5.
* dirmngr/dirmngr.c: Likewise.
* scd/scdaemon.c: Likewise.
--
GnuPG-bug-id: 3473
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (initialize_modules): Add hook again.
(main): Remove setting of the system houk but add scoket system hook
setting after assuan initialization.
--
Thread initialization is better to be deferred after fork (in case of
UNIX). assuan_sock_init should be earlier. Thus, we need to change
system hooks for assuan_sock_* interface. Or else, on Windows, it may
cause hang on server.
Updates-commit: 1524ba9656
GnuPG-bug-id: 3378
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (initialize_modules): Move assuan_set_system_hooks.
(main): ... here, just before assuan_sock_init.
--
In Assuan, global variable SOCK_CTX is used internally, which is
initialized by assuan_sock_init. When initialized, system hooks
are copied into SOCK_CTX structure. Thus, system hooks should
be set, before the call of assuan_sock_init.
GnuPG-bug-id: 3378
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* common/logging.c: Do not build any code if we can use the gpgrt_log
functions.
(log_logv_with_prefix): Rename to log_logv_prefix and change order of
args so that this function matches its printf like counterpart
gpgrt_logv_prefix. Change all callers.
(log_debug_with_string): Rename to log_debug_string. Change all
callers.
(log_printhex): Move first arg to end so that this function matches
its printf like counterpart gpgrt_log_printhex. Change all callers.
* common/logging.h: Divert to gpgrt/libgpg-error if we can use the
gpgrt_log functions.
(bug_at): Add inline versions if we can use the gpgrt_log functions.
* configure.ac (GPGRT_ENABLE_LOG_MACROS): Add to AH_BOTTOM.
(mycflags): Add -Wno-format-zero-length.
--
This patch enables the use of the log function from libgpgrt (aka
libgpg-error). Instead of checking a version number, we enable them
depending on macros set by recent gpg-error versions. Eventually the
whole divert stuff can be removed.
The -Wno-format-zero-length is required because log_printhex can be
called with an empty format string. Note that this is fully specified
standard C behaviour.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/gpg-agent.c (oAutoExpandSecmem): New enum value.
(opts): New option --auto-expand-secmem.
(main): Implement that option.
--
Note that this option has an effect only if Libgcrypt >= 1.8.2 is
used.
GnuPG-bug-id: 3530
* agent/gpg-agent.c (handle_connections): Always check inotify fds.
--
I noticed a gpg-agent processed, probably in shutdown_pending state,
which was selecting on only these two inotify fds. The select
returned immediately but because we did not handle the fds in
shutdown_pending state they were not read and the next select call
returned one of them immediately again. Actually that should not
hanppen because the
if (active_connections == 0)
break; /* ready */
should have terminated the loop. For unknown reasons (maybe be just a
connection thread terminated in a gdb session) that did not happen.
By moving the check outside of the shutdown_pending condition and
closing the fd after they have been triggered the code should be more
robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 5d83eb9226)
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 380bce13d9)
* agent/gpg-agent.c (handle_connections): Always check inotify fds.
--
I noticed a gpg-agent processed, probably in shutdown_pending state,
which was selecting on only these two inotify fds. The select
returned immediately but because we did not handle the fds in
shutdown_pending state they were not read and the next select call
returned one of them immediately again. Actually that should not
hanppen because the
if (active_connections == 0)
break; /* ready */
should have terminated the loop. For unknown reasons (maybe be just a
connection thread terminated in a gdb session) that did not happen.
By moving the check outside of the shutdown_pending condition and
closing the fd after they have been triggered the code should be more
robust.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/protect.c (calibrate_get_time): Use clock or clock_gettime.
--
For calibration, clock(3) is better than times(3) among UNIXen.
Tested on NetBSD 7.1 and FreeBSD 11.1, using QEMU.
Thanks to Damien Goutte-Gattat for the information of use of
CLOCKS_PER_SEC; The old code with times(3) is not 100% correct,
in terms of POSIX. It should have used sysconf (_SC_CLK_TCK) instead
of CLOCKS_PER_SEC. CLOCKS_PER_SEC is specifically for clock(3).
GnuPG-bug-id: 3056, 3276, 3472
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 52d41c8b0f)
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit f7212f1d11)
* agent/command.c (cmd_getinfo): New sub-commands.
* agent/protect.c (get_standard_s2k_count): Factor some code out to ...
(get_calibrated_s2k_count): new.
(get_standard_s2k_time): New.
Signed-off-by: Werner Koch <wk@gnupg.org>
* agent/agent.h (opt): New field 's2k_count'.
* agent/gpg-agent.c (oS2KCount): New enum value.
(opts): New option --s2k-count.
(parse_rereadable_options): Set opt.s2k_count.
--
This option is useful to speed up the starting of gpg-agent and in
cases where the auto-calibration runs into problems due to a broken
time measurement facility.
Signed-off-by: Werner Koch <wk@gnupg.org>
Werner Koch