* g10/gpg.c (opts): Use string for oLoggerFD, oOverrideSessionKeyFD,
oStatusFD, oAttributeFD, oCommandFD, and oPassphraseFD.
(main): Use translate_sys2libc_fdstr.
* g10/gpgv.c (opts): Use string for oLoggerFD, and oStatusFD.
(main): Use translate_sys2libc_fdstr.
* sm/gpgsm.c (opts): Use string for oLoggerFD, oStatusFD, and
oPassphraseFD.
(main): Use translate_sys2libc_fdstr.
* tools/gpg-auth.c (opts): Use string for oStatusFD.
(main): Use translate_sys2libc_fdstr.
tools/gpg-card.c (opts): Use string for oStatusFD.
(main): Use translate_sys2libc_fdstr.
* tools/gpg-pair-tool.c (opts): Use string for oStatusFD.
(main): Use translate_sys2libc_fdstr.
* tools/gpg-wks-client.c (opts): Use string for oStatusFD.
(main): Use translate_sys2libc_fdstr.
* tools/gpgconf.c (opts): Use string for oStatusFD.
(main): Use translate_sys2libc_fdstr.
* tools/gpgtar-create.c (gpgtar_create): Fix for opt.status_fd.
* tools/gpgtar-extract.c (gpgtar_extract): Fix for opt.status_fd.
* tools/gpgtar-list.c (gpgtar_list): Fix for opt.status_fd.
* tools/gpgtar.c (opts): Use string for oStatusFD.
(main): Use translate_sys2libc_fdstr.
* tools/gpgtar.h (opts): Use string for oStatusFD.
--
GnuPG-bug-id: 6551
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf.c (show_configs): Add a list of envvars and print
them.
--
Note that for simplicity we to not distinguish between Windows and
Linux here.
* common/w32-reg.c (read_w32_reg_string): Add arg r_hklm_fallback and
change all callers.
(show_configs): Indicate whether the HKLM fallback was used.
* tools/gpgconf.c (show_other_registry_entries): Fix the Outlook Addin
Registry key. Indicate whether the HKLM fallback was used.
--
Note that this is backport from 2.2. The new support there for
REG_DWORD needs to be implemented in libgpg-error, though.
* tools/gpgconf.c: Assign short options -X and -V
(show_version_gnupg): Print the vsd version if available.
--
These changes are helpful for phone support.
* g10/gpg.c (main): Set LOG_NO_REGISTRY.
* sm/gpgsm.c (main): Ditto.
* tools/gpg-connect-agent.c (main): Ditto.
* tools/gpgconf.c (main): Ditto.
(show_other_registry_entries): Print "DefaultLogFile".
--
The intention of this mostly forgotten registry entry was to allow for
easy debugging of the tools. However, with the global config file
common.conf things are anyway better. We disable the use for the
commonly used tools so that it does not look like calling gpg on the
command line seems to block with no output if the log
server (e.g. tcp://1.2.3.4:11111) is not reachable.
* tools/gpgconf.c (my_copy_file): Add arg LISTP and record certain
things.
(show_configs_one_file): New arg LISTP to be passed thru.
(show_configs): Show envars and regisiry values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aShowConfigs): New.
(opts): Add --show-configs.
(CUTLINE_FMT): New.
(show_version_gnupg): Add arg "prefix" and adjust caller.
(my_copy_file): New.
(show_configs_one_file): New.New.
(show_configs): New.
(main): Call show_configs.
--
The ability to have a consolidated list of all config files is very
useful for support cases. This is in particular important due to the
global config files and their conditional constructs.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (is_gnupg_default_homedir): Use standard_homedir
instead of the constant which makes a difference on Windows.
(_gnupg_socketdir_internal) [W32]: Move the directory to LOCAL_APPDATA.
(gnupg_cachedir): Remove unsued function.
* common/sysutils.c (gnupg_rmdir): New.
* tools/gpgconf.c (main): s/rmdir/gnupg_rmdir/.
--
That is actually a more correct directory than APPDATA. This fixes
a problem with installations where the APPDATA is non a network drive
and the resulting socket filename is truncated in our socket helper
function (because we use sockaddr also for our local socket
emulation on Windows).
LOCAL_APPDATA is expected to be on the local box and thus in the
majority of cases the resulting socket file name will be short enough.
GnuPG-bug-id: 5537
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/init.c (_init_common_subsystems) [W32]: Set the codepage to
UTF-8 for input and putput. Switch gettext to UTF-8.
* tools/gpgconf.c (main): Display the input and output codepage if
they differ.
* g10/gpg.c (utf8_strings) [W32]: Make sure this is always set.
--
With this patch the former patch to use ReadConsoleW and WriteConsoleW
in ttyio.c are kind of superfluous because the ANSI version of these
functions are also able to read/write UTF-8 directly given the console
code page has been set correctly. However, this seems to work only
with recent versions of Windows-10.
GnuPG-bug-id: 4365
* configure.ac: Require at least Libgcrypt 1.9.0. Remove all
GCRYPT_VERSION_NUMBER dependent code.
--
Only Libgcrypt 1.9 implements EAX which is a mandatory algorithm in
RFC4880bis.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main): Use gnupg_homedir instead of
default_homedir. Check for existance of the directory.
--
Fixes-commit: 7d95f2e7e7a09e3d433d449b117e3470f9dd38c7
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main) <aApplyDefaults, aApplyProfile>: Create the
standard home directory.
--
This fixes a regression due to the fix for
GnuPG-bug-id: 4867
Before that change gpgsm implictly created the homedir while options
were collected. It is important to have this so that a login script
can create config files for new users.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/asshelp.c (lock_spawning): Use a dedicated name for keyboxd.
* common/homedir.c (keyboxd_socket_name): New.
(gnupg_module_name): Put keyboxd into libexecdir.
* tools/gpgconf-comp.c (known_options_keyboxd): New.
(gc_component): Add entry for keyboxd.
(keyboxd_runtime_change): New.
(gc_component_launch): Support keyboxd.
* tools/gpgconf.c (list_dirs): Emit new item keyboxd-socket.
(main): Also remove keyboxd socket.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/stringhelp.h (split_fields): Use const * for the strings in
the ARRAY.
(split_fields_colon): Likewise.
* common/stringhelp.c (split_fields, split_fields_colon): Fix
the implementation.
* agent/call-scd.c, agent/command.c: Follow the change.
* common/t-stringhelp.c, dirmngr/loadswdb.c: Likewise.
* g10/call-agent.c, tools/card-call-scd.c: Likewise.
* tools/card-yubikey.c, tools/gpg-card.c: Likewise.
* tools/gpg-card.h, tools/gpg-wks-client.c: Likewise.
* tools/gpgconf-comp.c, tools/gpgconf.c: Likewise.
* tools/wks-util.c: Likewise.
--
The strings in the ARRAY don't need to be released by caller, as those
are references. It's easier to follow the code when it's explicitly
const *.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* tools/gpgconf.c (aShowCodepages): New.
(opts): New command --show-codepages.
(main) [W32]: Implement
--
This is a Windows helper command to quickly check which code pages are
currently used. Useful for debugging. Has no effect on Unix.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (main): Set the coinfig directories.
* tools/gpgconf-comp.c (gc_backend): Change the name of the config
files.
(struct gc_option): Add new field 'attr'.
(retrieve_options_from_program): Rewrite to use gpgrt_argparser.
--
We need to do larger changes to gpgconf so that it is possible to get
also global config options and their attributes. The old code worked
along its own list of option and used a generic option file parser.
This has no support for global config files. We now use
gpgrt_argparser so that we to do exactly the same as the component
does and thus delivers the actual option values as seen by the
component.
This is just a first step and we need to change more things.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/util.h: Remove argparse.h.
* common/argparse.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS.
* configure.ac (GPGRT_ENABLE_ARGPARSE_MACROS): Define.
* agent/gpg-agent.c: Undef GPGRT_ENABLE_ARGPARSE_MACROS and include
argparse.h. Do this also for all main modules which use our option
parser except for gpg. Replace calls to strusage by calls to
gpgrt_strusage everywhere.
* g10/gpg.c (opts): Change type to gpgrt_opt_t. Flag oOptions and
oNoOptions with ARGPARSE_conffile and ARGPARSE_no_conffile.
(main): Change type of pargs to gpgrt_argparse_t. Rework the option
parser to make use of the new gpgrt_argparser.
--
This is not yet finished but a make check works. gpg has the most
complex and oldest option handling and thus this is the first
migration target. SE-Linux checks and version-ed config files are
missing and will be added later.
GnuPG-bug-id: 4788
Signed-off-by: Werner Koch <wk@gnupg.org>
No functional changes, just fixing minor spelling issues.
---
Most of these were identified from the command line by running:
codespell \
--ignore-words-list fpr,stati,keyserver,keyservers,asign,cas,iff,ifset \
--skip '*.po,ChangeLog*,help.*.txt,*.jpg,*.eps,*.pdf,*.png,*.gpg,*.asc' \
doc g13 g10 kbx agent artwork scd tests tools am common dirmngr sm \
NEWS README README.maint TODO
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
* common/util.h (EXTERN_UNLESS_MAIN_MODULE): Add the definion only
here but now without the Norcroft-C. Change all other places where it
gets defined.
* common/iobuf.h (iobuf_debug_mode): Declare unconditionally as
extern.
* common/iobuf.c (iobuf_debug_mode): Define it here.
* agent/gpg-agent.c (INCLUDED_BY_MAIN_MODULE): Define here and also in
all main modules of all other programs.
* g10/main.h: Put util.h before the local header files.
--
This change is required for use with gcc/ld's LTO feature which does
not allow common blocks. Further gcc 10 will make -fno-common the
default and thus this chnage is always needed. What a pitty.
Co-authored-by: Tomáš Mráz
GnuPG-bug-id: 4831
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 21d9bd8b87a9f793a106095e3838eb71825189d7)
- Applied respective chnages also to gpg-card and keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf-comp.c (gc_component_t): Move this enum to ...
* tools/gpgconf.h: here.
* tools/gpgconf.c (oShowSocket): New.
(opts): Add new option.
(main): Implement new option.
--
This is a convenience options for software which directly connects to
gpg-agent and thus needs to new the socket. By using --show-socket
along with --launch that software can also autostart the agent or the
dirmngr. Without this two calls to gpgconf would be required.
Actually the same behaviour can be achieved by running
gpg-connect-agent to query the running gpg-agent's socket via GETINFO.
The gpg-connect also makes sure that the agent is started. This is
not anymore suggested because gpgconf shall in future be used for all
such things.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (oStatusFD): New const.
(opts): New option --status-fd.
(statusfp): New var.
(set_status_fd): New.
(gpgconf_write_status): New.
(gpgconf_failure): New.
(main): Set status fd and replace exit by gpgconf_failure.
* tools/gpgconf-comp.c: Repalce exit by gpgconf_failure.
(gc_process_gpgconf_conf): Print a few warning status messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* configure.ac (GNUPG_SWDB_TAG): New ac_define. Set it to "gnupg22".
* tools/gpgconf.c (query_swdb): Use it.
* build-aux/speedo.mk: Change tag "gnupg21" to "gnupg22".
* Makefile.am (distcheck-hook): Ditto.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tests/openpgp/defs.scm (stop-agent): Swap order of actions. Kill
all daemons using gpgconf.
* tools/gpgconf.c (main) <aRemoveSocketDir>: Try to remove known
socketfails on rmdir failure. Do no fail for ENONET.
--
Killing all daemons is not really required but it does not harm to be
prepared for the future.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/logging.c (do_logv): Remove extra parentheses in comparison.
* dirmngr/dns-stuff.c (resolve_addr_libdns): Init RES so that
dns_res_close is given a defined value in the error case.
* dirmngr/http.c (cookie_read, cookie_write) [HTTP_USE_NTBTLS]: Fix
format string char.
* dirmngr/ks-engine-hkp.c (ks_hkp_help): Remove duplicate "const".
* dirmngr/ks-engine-http.c (ks_http_help): Ditto.
* dirmngr/ks-engine-kdns.c (ks_kdns_help): Ditto.
* dirmngr/ks-engine-ldap.c (ks_ldap_help): Ditto.
* scd/app-p15.c (send_keypairinfo, do_getattr): Fix format string
char.
* tools/gpgconf-comp.c (gpg_agent_runtime_change): Init PID for the
error case.
(scdaemon_runtime_change): Ditto.
(dirmngr_runtime_change): Ditto.
* tools/gpgconf.c (query_swdb): Init VALUE_SIZE_UL.
Signed-off-by: Werner Koch <wk@gnupg.org>
* tools/gpgconf.c (aApplyProfile): New.
(opts): New command --apply-profile.
(main): Implement that command.
* tools/gpgconf-comp.c (option_check_validity): Add arg VERBATIM.
(change_options_program): Ditto.
(change_one_value): Ditto.
(gc_component_change_options): Ditto.
(gc_apply_profile): New.
--
Here is an example for a profile
--8<---------------cut here---------------start------------->8---
# foo.prf - Sample profile
[gpg]
compliance de-vs
default-new-key-algo brainpoolP256r1+brainpoolP256r1
[gpgsm]
enable-crl-checks
[gpg-agent]
default-cache-ttl 900
max-cache-ttl [] 3600
no-allow-mark-trusted
no-allow-external-cache
enforce-passphrase-constraints
min-passphrase-len 9
min-passphrase-nonalpha 0
[dirmngr]
keyserver hkp://keys.gnupg.net
allow-ocsp
--8<---------------cut here---------------end--------------->8---
Note that flags inside of brackets are allowed after the option name.
The only defined flag for now is "[default]". In case the value
starts with a bracket, it is possible to insert "[]" as a nop-flag.
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/homedir.c (gnupg_build_directory): New variable.
(gnupg_module_name_called): Likewise.
(gnupg_set_builddir): New function.
(gnupg_set_builddir_from_env): Likewise.
(gnupg_module_name): Support locating components in the build tree.
* common/util.h (gnupg_set_builddir): New prototype.
* tests/openpgp/defs.scm (tools): Drop 'gpg and 'gpg-agent.
(tool): Rename to 'tool-hardcoded.
(gpg-conf): New function, with accessors for the results.
(gpg-components): New variable.
(tool): New function.
* tools/gpgconf.c (enum cmd_and_opt_values): New key.
(opts): New option '--build-prefix'.
(main): Handle new option.
--
This change makes sure that the components from the build tree are
used, and not some older installed version in PATH. It also lets us
make GPGME use components from the build tree, making it possible to
execute GPGME's test suite with them.
Signed-off-by: Justus Winter <justus@g10code.com>
