* g10/keyedit.c (no_usable_encr_subkeys_warning): New.
(keyedit_menu): Call it after running an expire command.
* g10/import.c (import_one_real): Call it in the show_key case.
--
* kbx/keybox-init.c (DEFAULT_LL_BUFFER_SIZE): New.
--
A simple gpg --check-sigs benchmark showed on Linux a small
performance peak at around 64k (5m52 vs. 6m8 for 128k and 6m33 for
system size).
* kbx/keybox-init.c (ll_buffer_size): New var intialized to 128k
(stream_buffers): New var.
(keybox_set_buffersize): New.
(_keybox_ll_open, _keybox_ll_close): Implement buffering.
* sm/gpgsm.c (oKbxBufferSize): New.
(opts): Add option --kbx-buffer-size.
(main): Call keybox_set_buffersize.
* g10/gpg.c: Include keybox.h.
* (oKbxBufferSize): New.
(opts): Add option --kbx-buffer-size.
(main): Call keybox_set_buffersize.
--
Running a test on Windows using a pubring.kbx with
Total number of blobs: 2098
openpgp: 1294
x509: 803
and a size of 42MiB with
gpgsm -k --with-validation --disable-dirmngr --kbx-buffer-size N >nul
gives these performance figures using procmon
| N(k) | file events | time(s) |
|------+-------------+---------|
| 0 | 4900000 | 86 |
| 16 | 2456000 | 58 |
| 32 | 1233000 | 43 |
| 64 | 622000 | 37 |
| 128 | 317000 | 32 |
| 256 | 164000 | 31 |
| 512 | 88000 | 30 |
Using _open instead of CreateFile give the same number of file events
but increased the time slight by one second for the measured buffer
size of 64k and 128k. Benchmarks for gpg have not been conducted.
* kbx/keybox-defs.h (KEYBOX_LL_OPEN_READ)
(KEYBOX_LL_OPEN_UPDATE, KEYBOX_LL_OPEN_CREATE): New.
* kbx/keybox-init.c (_keybox_ll_open): New. Replace all keybox use of
es_fopen by this function.
(_keybox_ll_close): New. Replace all keybox use of es_fclose by this
function.
--
Note that this has not been done for the utilities and the backend-kbx
of keyboxd.
* kbx/keybox-search.c (open_file): Use sysopen and sequential.
* kbx/keybox-update.c (create_tmp_file): Ditto.
(blob_filecopy): Ditto.
(keybox_set_flags): Ditto.
(keybox_delete): Ditto.
(keybox_compress): Ditto.
--
Under Windows "sysopen" requests that direct API calls (CreateFile et
al.) are used instead of the libc wrappers. This may or may not
improve the performance.
Using "sequential" is a hint to Windows to assume that a file is in
general access in a sequential manner. This will have an affect only
with a future libgpg-error.
* sm/certchain.c (check_cert_policy): Add simple static cache.
--
It is quite common that a policy file does not exist. Thus we can
avoid the overhead of trying to open it over and over again just to
assert that it does not exists.
* g10/import.c (do_transfer): Force the overridden key import
even when smartcard is available.
--
Fixes-commit: 2c1297055041b4657ea1a927acac978c2b09a483
GnuPG-bug-id: 3456
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* agent/command.c (cmd_keytocard): Add new arg for ECDH params.
* scd/app-openpgp.c (ecc_writekey): Use provided ECDH params to
compute the fingerprint.
* g10/call-agent.c (agent_keytocard): Add arg ecdh_param_str.
* g10/keyid.c (ecdh_param_str_from_pk): New.
* g10/card-util.c (card_store_subkey): Pass ECDH params to writekey.
* g10/keygen.c (card_store_key_with_backup): Ditto.
* scd/app-openpgp.c (store_fpr): Add arg update.
(rsa_read_pubkey, ecc_read_pubkey): Add arg meta_update and avoid
writing the fingerprint back to the card if not set.
(read_public_key): Also add arg meta_update.
(get_public_key): Do not pass it as true here...
(do_genkey): ... but here.
(rsa_write_key, ecc_writekey): Force string the fingerprint.
--
The problem showed up because in 2.4 we changed the standard ECDH
parameter some years ago. Now when trying to write an ECDH key
created by 2.2 with 2.4 to an openpgp card, scdaemon computes a wrong
fingerprint and thus gpg was not able to find the key again by
fingerprint.
The patch also avoids updating the stored fingerprint in certain
situations.
This fix is somewhat related to
GnuPG-bug-id: 6378
* regexp/jimregexp.c (regatom): Raise REG_ERR_UNMATCHED_BRACKET when
no matching end bracket.
(regmatch): Fix the end of word check.
--
Original changes:
Signed-off-by: Steve Bennett <steveb@workware.net.au>
GnuPG-bug-id: 6455
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* regexp/jimregexp.c (regatom): Make error checking for stray
backslash at end of the string work. Check that the pattern class is
closed by a bracket.
--
GnuPG-bug-id: 6455
Co-authored-by: Guldrelokk
* g10/card-util.c (current_card_status): Print a hint for fishy
outputs.
(enum cmdids): Add cmdOPENPGP.
(cmds): Add "openpgp".
(card_edit): Implement that command.
--
If a Yubikey has been used in PIV mode the initial listing does not
look correct. Although we explicitly switch to the OpenPGP app when
needed, we don't want to do this in listing mode. Instead we offer a
new command "openpgp" to force the openpgp mode. The ultimate goal
will be to enhance the gpg-card tool to completely take over the
--card-edit features. But we are not yet there.
GnuPG-bug-id: 6462
* common/homedir.c (gnupg_maybe_make_homedir): Factor some code out to
...
(create_common_conf): new.
(standard_homedir): Call it also from here.
--
Fixes-commit: d9e7488b17fdc617eec735e2c0485b69285ba511
* g10/call-agent.c (agent_scd_switchapp): New.
* g10/card-util.c (get_info_for_key_operation): Call it.
--
It may happen that the active card was last used for PIV and in that
case certain commands will fail because they assume the OpenPGP app.
Fortunately we have a pretty central place to assure that the right
app has been selected.
The bug can be easily noticed on Windows.
GnuPG-bug-id: 6378
* scd/app-common.h (struct card_ctx_s): Add maybe_check_aid flag.
* scd/command.c (cmd_apdu): Set it.
* scd/app.c (check_external_interference): Consult this flag.
(maybe_switch_app): Do a re-select if this flag is set.
--
After the gpg-card tool has issued a Yubikey specific command the
current application is not anymore correctly selected. This then
results in all kind of errors. We detect this now and try to
re-select the last app.
* common/util.h (GNUPG_MODULE_NAME_GPGTAR): New.
* common/homedir.c (gnupg_module_name): Add it.
* tools/gpgtar.c: Include comopt.h.
(enum cmd_and_opt_values): Add oDebug.
(opts): Add --debug.
(any_debug): New.
(main): Parse common.conf.
--
Having a way to see the output of gpgtar is often useful for
debugging. The only effect of the debug option is to show whether
common.conf was read.
* common/openpgp-oid.c (openpgp_curve_to_oid): Repalce strmcp by
ascii_strcasecmp.
(openpgp_oid_or_name_to_curve): Ditto.
(openpgp_is_curve_supported): Ditto.
(get_keyalgo_string): Ditto.
--
It was just to hard to remember the correct capitalization of
names like brainpoolP512r1.
* g10/import.c (transfer_secret_keys): Only emit a warning when secret
key is not encrypted.
--
Fixing-commit: dbfb7f809b89cfe05bdacafdb91a2d485b9fe2e0
GnuPG-bug-id: 6322
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
