* sm/keydb.c (struct keydb_local_s): Add field saved_search_result.
(keydb_push_found_state): Implement for keyboxd.
(keydb_pop_found_state): Ditto.
(keydb_get_cert): Do not release the cert so that the function can be
used again to get the same cert. This is the same behaviour as in
pubring.kbx mode.
* sm/certchain.c, sm/import.c: Improve some error messages.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/kbxserver.c (cmd_search): Use the openpgp hack for calling
classify_user_id.
* kbx/backend-sqlite.c (run_select_statement): Remove angle brackets
in exact addrspec mode.
* g10/call-keyboxd.c (keydb_search): Do not duplicate the left angle
bracket.
* sm/keydb.c (keydb_search): Ditto.
--
Note that the openpgp hack flag of classify_user_id is actually a
misnomer because we actually hack a round a problem in gpgsm. And it
is only over there that we don't set it there. In keyboxd the flag
should be set. And we need to remove the angle brackets of course
because that is how we create the addrspec column values.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/openfile.c (try_make_homedir): Move core of the code to ...
* common/homedir.c (gnupg_maybe_make_homedir): new.
* sm/keydb.c (try_make_homedir): Implement using new function.
* common/homedir.c: Include i18n.h.
* po/POTFILES.in: Add common/homedir.c.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
We need to use es_fopen on Windows to cope with non-ascii file names.
This is quite a large but fortunately straightforward change. At a
very few places we keep using stdio (for example due to the use of
popen).
GnuPG-bug-id: 5098
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/sysutils.c (gnupg_access): New. Replace all calls to access
by this wrapper.
* common/homedir.c (w32_shgetfolderpath): Change to return UTF-8
directory name.
(standard_homedir): Adjust for change.
(w32_commondir, gnupg_cachedir): Ditto.
--
Also use SHGetFolderPathW instead of SHGetFolderPathA on Windows.
This is required to correctly handle non-ascii filenames on Windows.
GnuPG-bug-id: 5098
* kbx/kbx-client-util.c (kbx_client_data_new): Add arg 'dlines'.
* g10/call-keyboxd.c (open_context): Set DLINES to true.
* sm/keydb.c (open_context): Ditto.
--
This allows to compile time switch between the D-line and the
fd-passing data communication between gpg/gpgsm and keyboxd. A quick
test with about 3000 OpenPGP keys showed that D-lines are only 10%
slower than the fd-passing based implementation. Given that the
thread adds extra complexity we go for now with the D-line approach.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Resolved Conflicts:
* common/asshelp.c: Keep the new code in master for spawing under
Windows.
* g10/Makefile.am: Keep all new file.
* g10/photoid.c: Pass CTRL to pct_expando.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.c (keydb_add_resource): Call keybox_compress.
* sm/keydb.c (keydb_add_resource): Release the lock after a compress.
--
Note that in gpgsm we already did the compress run but we didn't
released the lock on the file. This might have been a reason for some
strange hangs.
GnuPG-bug-id: 4644
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-init.c (keybox_lock): New arg TIMEOUT. Change all
callers to pass -1 when locking.
* sm/keydb.c (struct resource_item): Remove LOCKANDLE.
(struct keydb_handle): Add KEEP_LOCK.
(keydb_add_resource): Use keybox locking instead of a separate dotlock
for testing whether we can run a compress.
(keydb_release): Reset KEEP_LOCK.
(keydb_lock): Set KEEP_LOCK.
(unlock_all): Take care of KEEP_LOCK.
(lock_all): Use keybox_lock instead of dotlock fucntions.
(keydb_delete): Remove arg UNLOCK.
* sm/delete.c (delete_one): Adjust keydb_delete. Due to the KEEP_LOCK
the keydb_release takes care of unlocking.
--
This aligns the code more with g10/keydb.c and avoids the separate
calls to dotlock_take.
GnuPG-bug-id: 4505
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/userids.c (classify_user_id): Support 32 byte fingerprints.
* kbx/keybox-search-desc.h (KEYDB_SEARCH_MODE_FPR32): New.
(struct keydb_search_desc): Add field fprlen.
* kbx/keybox-defs.h (struct _keybox_openpgp_key_info): Add field
version and increase size of fpr to 32.
* kbx/keybox-blob.c: Define new version 2 for PGP and X509 blobs.
(struct keyboxblob_key): Add field fprlen and increase size of fpr.
(pgp_create_key_part_single): Allow larger fingerprints.
(create_blob_header): Implement blob version 2 and add arg want_fpr32.
(_keybox_create_openpgp_blob): Detect the need for blob version 2.
* kbx/keybox-search.c (blob_get_first_keyid): Support 32 byte
fingerprints.
(blob_cmp_fpr): Ditto.
(blob_cmp_fpr_part): Ditto.
(has_fingerprint): Add arg fprlen and pass on.
(keybox_search): Support KEYDB_SEARCH_MODE_FPR32 and adjust for
changed has_fingerprint.
* kbx/keybox-openpgp.c (parse_key): Support version 5 keys.
* kbx/keybox-dump.c (_keybox_dump_blob): Support blob version 2.
* g10/delkey.c (do_delete_key): Support KEYDB_SEARCH_MODE_FPR32.
* g10/export.c (exact_subkey_match_p): Ditto.
* g10/gpg.c (main): Ditto.
* g10/getkey.c (get_pubkey_byfprint): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
* g10/keydb.c (keydb_search_desc_dump): Support
KEYDB_SEARCH_MODE_FPR32 and adjust for changed KEYDB_SEARCH_MODE_FPR.
(keydb_search): Add new arg fprlen and change all callers.
* g10/keyedit.c (find_by_primary_fpr): Ditto.
* g10/keyid.c (keystr_from_desc): Ditto.
* g10/keyring.c (keyring_search): Ditto.
* g10/keyserver.c (print_keyrec): Ditto.
(parse_keyrec): Ditto.
(keyserver_export): Ditto.
(keyserver_retrieval_screener): Ditto.
(keyserver_import): Ditto.
(keyserver_import_fprint): Ditto.
(keyidlist): Ditto.
(keyserver_get_chunk): Ditto.
* g10/keydb.c (keydb_search): Add new arg fprlen and change all
callers.
* sm/keydb.c (keydb_search_fpr): Adjust for changed
KEYDB_SEARCH_MODE_FPR.
--
This prepares the support for OpenPGP v5 keys. The new version 2 blob
format is needed for the longer fingerprints and we also use this
opportunity to prepare for storing the keygrip in the blob for faster
lookup by keygrip. Right now this is not yet functional.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keydb.c (maybe_create_keybox): Open new keybox in bin mode.
--
As the header contains a timestamp we will have the conversion
problems if the keybox is not opened in binary mode.
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* g10/keydb.c (keydb_add_resource): Make ANY_REGISTERED
file-global. Write a STATUS_ERROR.
(maybe_create_keyring_or_box): Check for non-accessible but existant
file.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND.
* sm/keydb.c (keydb_add_resource): Rename ANY_PUBLIC to ANY_REGISTERED
and make file-global. Write a STATUS_ERROR.
(keydb_search): Write a STATUS_ERROR if no keyring has been registered
but continue to return NOT_FOUND. Also add new arg CTRL and change
all callers to pass it down.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keydb.c (maybe_create_keybox): Create the header blob.
--
This is required so that g10/keydb.c can properly detect that a keybox
file is actually there. Just writing a 0 zero length keybox file is
not sufficient because a file with that name may also be an old-style
OpenPGP keyring.
GnuPG-bug-id: 2275
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-init.c (keybox_register_file): Change interface to return
the token even if the file has already been registered.
* g10/keydb.c (primary_keyring): Rename to primary_keydb.
(maybe_create_keyring_or_box): Change return type to gpg_error_t.
(keydb_add_resource): Ditto. s/rc/err/.
(keydb_add_resource): Mark an already registered as primary.
* sm/keydb.c (maybe_create_keybox): Change return type to gpg_error_t.
(keydb_add_resource): Ditto. s/rc/err/.
(keydb_add_resource): Adjust for changed keybox_register_file.
--
This change aligns the registering of keyboxes with those of
keyrings. This fixes a potential bug:
gpg --keyring foo.kbx --keyring bar.gpg --keyring foo.kbx
would have marked bar.gpg as primary resource and thus inserting new
keys there. The correct and now fixed behavior is to insert to
foo.kbx.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/keydb.c (keydb_store_cert): Clear ephemeral flag for
existing certs if store should not be ephemeral.
--
Previously keydb_store_cert would ignore ephemeral certificates
when asked to store a non ephemeral certificate and insert
it again without the flags. This resulted in duplicated
certificates in the keybox.
GnuPG-bug-id: 1921
Signed-off-by: Andre Heinecke <aheinecke@intevation.de>
* kbx/keybox.h (keybox_blobtype_t): New.
* kbx/keybox-defs.h (BLOBTYPE_*): Replace by KEYBOX_BLOBTYPE_*.
* kbx/keybox-search.c (keybox_search): Add arg want_blobtype and skip
non-matching blobs.
* sm/keydb.c (keydb_search): Pass KEYBOX_BLOBTYPE_X509 to keybox_search.
* g10/keydb.c (keydb_search): Pass KEYBOX_BLOBTYPE_PGP to keybox_search.
--
Without this fix a listing of all keys would fail because the wrong
blob type would be returned for the gpg or gpgsm.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-search.c (keybox_search): Add arg r_skipped and skip too
long blobs.
* sm/keydb.c (keydb_search): Call keybox_search with a dummy param.
* g10/keydb.c (struct keydb_handle): Add field skipped_long_blobs.
(keydb_search_reset): Reset that field.
(keydb_search): Update that field.
(keydb_get_skipped_counter): New.
* g10/keylist.c (list_all): Print count of skipped keys.
Signed-off-by: Werner Koch <wk@gnupg.org>
* kbx/keybox-defs.h (struct keybox_handle): Add field for_openpgp.
* kbx/keybox-file.c (_keybox_write_header_blob): Set openpgp header
flag.
* kbx/keybox-blob.c (_keybox_update_header_blob): Add arg for_openpgp
and set header flag.
* kbx/keybox-init.c (keybox_new): Rename to do_keybox_new, make static
and add arg for_openpgp.
(keybox_new_openpgp, keybox_new_x509): New. Use them instead of the
former keybox_new.
* kbx/keybox-update.c (blob_filecopy): Add arg for_openpgp and set the
openpgp header flags.
* g10/keydb.c (rt_from_file): New. Factored out and extended from
keydb_add_resource.
(keydb_add_resource): Switch to the kbx file if it has the openpgp
flag set.
* kbx/keybox-dump.c (dump_header_blob): Print header flags.
--
The problem was reported by dkg on gnupg-devel (2014-10-07):
I just discovered a new problem, though, which will affect people on
systems that have gpg and gpg2 coinstalled:
0) create a new keyring with gpg2, and use it exclusively with gpg2
for a while.
1) somehow (accidentally?) use gpg (1.4.x) again -- this creates
~/.gnupg/pubring.gpg
2) future runs of gpg2 now only look at pubring.gpg and ignore
pubring.kbx -- the keys you had accumulated in the keybox are no
longer listed in the output of gpg2 --list-keys
Note that gpgsm has always used pubring.kbx and thus this file might
already be there but without gpg ever inserted a key. The new flag in
the KBX header gives us an indication whether a KBX file has ever been
written by gpg >= 2.1. If that is the case we will use it instead of
the default pubring.gpg.
Signed-off-by: Werner Koch <wk@gnupg.org>
* sm/gpgsm.h (opt): Add field "no_homedir_creation".
* sm/gpgsm.c (main): Set it if --no-options is used.
* sm/keydb.c (try_make_homedir): New. Similar to the one from
g10/openfile.c.
(maybe_create_keybox): New. Similar to the one from g10/keydb.c.
(keydb_add_resource): Replace some code by maybe_create_keybox.
* kbx/keybox-search.c (keybox_search): Add arg R_DESCINDEX. Chnage
both callers.
* g10/keydb.c (keydb_search): Always set DESCINDEX.
--
This only affects the new keybox for OpenPGP keys in 2.1. The bug
exhibited itself by running GPA's backup command on Windows.
The asymmetric quotes used by GNU in the past (`...') don't render
nicely on modern systems. We now use two \x27 characters ('...').
The proper solution would be to use the correct Unicode symmetric
quotes here. However this has the disadvantage that the system
requires Unicode support. We don't want that today. If Unicode is
available a generated po file can be used to output proper quotes. A
simple sed script like the one used for en@quote is sufficient to
change them.
The changes have been done by applying
sed -i "s/\`\([^'\`]*\)'/'\1'/g"
to most files and fixing obvious problems by hand. The msgid strings in
the po files were fixed with a similar command.
Since 2009-12-08 gpg was not able to find email addresses indicated
by a leading '<'. This happened when I merged the user id
classification code of gpgsm and gpg.
We better do this once and for all instead of cluttering all future
commits with diffs of trailing white spaces. In the majority of cases
blank or single lines are affected and thus this change won't disturb
a git blame too much. For future commits the pre-commit scripts
checks that this won't happen again.
