* g10/trustdb.c (validate_keys): Use log_info instead of log_error for
not found or expired UTKs.
--
Actually the not-found case used log_error for decades. The
semantically simialr expired case did thus the same. The actual
problem is for example in the import case where gpg exits with a
failure despite that a key validation was requested.
GnuPG-bug-id: 7351
* g10/trustdb.c (copy_key_item): New.
(validate_keys): Use a stripped down UTK list w/o expired keys.
--
This patch makes sure that an expired trusted key is not used for
trust computation. The test case is to delete a trusted key from the
keyring, import a copy of that key which has already expired, check
that a signed key is not anymore fully trusted and finally import a
prolonged version of the trusted key and check that the signed key is
now again fully trusted.
GnuPG-bug-id: 7200
* g10/trustdb.c (store_validation_status): Remove arg 'stored'.
(validate_keys): Remove keyhashtable 'stored' which was never used.
--
This has been here since 2003. The variable was never evaluated -
only stored.
Also added some comments.
* tools/gpg-wks-client.c (mirror_one_key): Test for no domain
specified.
--
The code did not really work if no domain was given. It worked but
filtered out all keys so that no key was actually exported.
* g10/trustdb.c: Move a function and some definitions around.
(user_utk_list): Rename to trusted_key_list. Change all users.
(any_trusted_key_seen): New.
(tdb_register_trusted_key): Set it here. Handle the new value "none".
(verify_own_keys): Do not delete a trusted key from the trustdb if a
trusted-key option was not used.
--
GnuPG-bug-id: 7025
* g10/trustdb.c (tdb_clear_ownertrusts): Detect stale validity
records.
--
GnuPG-bug-id: 6399
This problem was introduced by an actually very useful patch
2002-12-13 David Shaw <dshaw@jabberwocky.com>
[...]
* import.c (import_keys_internal): Used here so we don't rebuild
the trustdb if it is still clean.
(import_one, chk_self_sigs): Only mark trustdb dirty if the key
that is being imported has any sigs other than self-sigs.
Suggested by Adrian von Bidder.
[the last part]
The bug exhibited itself only after signing a key, deleting that key
and then re-importing the original non-signed key.
* g10/tdbdump.c (export_ownertrust): Skip records marked with the
option --trusted-key.
(import_ownertrust): Clear the trusted-key flag.
* g10/tdbio.h (struct trust_record): Add field flags.
* g10/tdbio.c (tdbio_dump_record): Improve output.
(tdbio_read_record, tdbio_write_record): Handle flags.
* g10/trustdb.c (verify_own_keys): Clear stale trusted-keys and set
the flag for new --trusted-keys.
(tdb_update_ownertrust): Add arg as_trusted_key. Update callers.
--
GnuPG-bug-id: 5685
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (parse_list_options): Add "sort-sigs".
(main): Make it the default.
* g10/options.h (LIST_SORT_SIGS): New.
* g10/keylist.c (cmp_signodes): New.
(list_keyblock_print): Sort signatures and factor signature printing
code out to ...
(list_signature_print): new.
--
In particular together with --full-timestamps this makes it easier to
see the history of key signatures and their revocations. The
self-signatures are also printed first. To disable this
--list-options no-sort-sigs
can be used.
Also don't print the annoying "no recocation reason specified"
message.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keydb.h (fpr20_from_pk): New.
* g10/keyid.c (fpr20_from_pk): New.
* g10/tdbio.c (tdbio_search_trust_byfpr): Use fpr20_from_pk.
* g10/trustdb.c (keyid_from_fpr20): New.
(verify_own_keys): Use keyid_from_fpr20.
(tdb_update_ownertrust): Use fpr20_from_pk.
(update_min_ownertrust): Likewise.
(update_validity): Likewise.
--
For the compatibility of existing implementation, we keep the format
of trustdb untouched. The format of trustdb uses 20-byte fingerprint
for the trust record entry. To handle both of v4key (with 20-byte
fingerprint) and v5 key (with 32-byte fingerprint), we introduce FPR20
fingerprint, internally. For v4key, FPR20 is as same as v4
fingerprint. For v5key, FPR20 is constructed from v5key fingerprint.
GnuPG-bug-id: 5000
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* g10/trustdb.c (tdb_register_trusted_key): accept fingerprint as well
as long key ID.
* doc/gpg.texi: document that --trusted-key can accept a fingerprint.
--
GnuPG-bug-id: 4855
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Fixed uses or return and kept the old string to avoid breaking
translations.
Signed-off-by: Werner Koch <wk@gnupg.org>
--
Resolved Conflicts:
* common/asshelp.c: Keep the new code in master for spawing under
Windows.
* g10/Makefile.am: Keep all new file.
* g10/photoid.c: Pass CTRL to pct_expando.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/gpg.c (oUseKeyboxd,oKeyboxdProgram): New consts.
(opts): New options --use-keyboxd and --keyboxd-program.
(main): Implement them.
* g10/keydb.c: Move some defs out to ...
* g10/keydb-private.h: new file.
* g10/keydb.c: prefix function names with "internal" and move original
functions to ...
* g10/call-keyboxd.c: new file. Divert to the internal fucntion if
--use-keyboxd is used. Add a CTRL arg to most fucntions and change
all callers.
* g10/Makefile.am (common_source): Add new files.
(noinst_PROGRAMS): Do bot build gpgcompose.
--
Note that this is just the framework with only a basic implementation
of searching via keyboxd.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (verify_own_keys): Silence informational diagnostic.
--
This silences these notes with --quiet
gpg: Note: RFC4880bis features are enabled.
gpg: key EE65E8C75D41FD1D marked as ultimately trusted
GnuPG-bug-id: 4634
Signed-off-by: Werner Koch <wk@gnupg.org>
* common/mbox-util.c (mailbox_from_userid): Add arg subaddress and
implement. Change all callers to pass false for it.
* common/t-mbox-util.c (run_mbox_no_sub_test): New.
(run_filter): Add arg no_sub.
(main): Call new test and add option --no-sub.
--
Some stats: In the about 5300000 keys on the SKS servers we found 3055
unique mailboxes with a '+' in it. After removing leading and
trailing '+' as well as multiple '+' (e.g. "c++" or "foo+bar+baz")
2697 were left which seem to be valid sub-addresses.
To filter mailboxes out from a line delimited list with
user-ids (e.g. an SQL output), the command
t-mbox-util --verbose --filter
can be used; to output w/o sub-addresses add --no-sub.
GnuPG-bug-id: 4200
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/trustdb.c (sanitize_regexp): Only escape operators.
--
Backport from master commit:
ccf3ba92087e79abdeaa0208795829b431c6f201
To sanitize a regular expression, quoting by backslash should be only
done for defined characters. POSIX defines 12 characters including
dot and backslash.
Quoting other characters is wrong, in two ways; It may build an
operator like: \b, \s, \w when using GNU library. Case ignored match
doesn't work, because quoting lower letter means literally and no
much to upper letter.
GnuPG-bug-id: 2923
Co-authored-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
--
For proper operations as a server we need to avoid global variables.
Thus we need to pass the session state CTRL to most functions. Quite
a lot of changes but fortunately straightforward to do.
Signed-off-by: Werner Koch <wk@gnupg.org>
* g10/keygen.c (do_generate_keypair): Only update the ownertrust if we
do have a trust database.
* g10/trustdb.c (have_trustdb): New function.
* g10/trustdb.h (have_trustdb): New prototype.
* tests/openpgp/quick-key-manipulation.scm: Remove workaround.
GnuPG-bug-id: 2695
Signed-off-by: Justus Winter <justus@g10code.com>
* g10/trustdb.c (init_trustdb): Add and implement arg NO_CREATE.
Change to return an error code. Change all callers to to pass False
for NO_CREATE.
(tdb_get_ownertrust): New arg NO_CREATE. Call init_trustdb to test
for a non-existing trustdb. Change all callers to to pass False for
NO_CREATE.
(tdb_get_min_ownertrust): Ditto.
* g10/trust.c (get_ownertrust_with_min): Add arg NO_CREATE. Call
init_trustdb for a quick check.
(get_ownertrust_info): Add arg NO_CREATE.
(get_ownertrust_string): Ditto.
* g10/gpgv.c (get_ownertrust_info): Adjust stub.
* g10/test-stubs.c (get_ownertrust_info): Ditto.
* g10/mainproc.c (list_node): Call get_ownertrust_info with NO_CREATE
set.
* g10/pubkey-enc.c (get_it): Ditto.
--
Fixes-commit: effa80e0b5fd8cf9e31a984afe391c2406edee8b
For details see mails on Feb 27 and 28 by dkg, gniibe, and Justus to
gnupg-devel 'test failure on git master with
decrypt-session-key.scm (and: continuous integration?)'
Signed-off-by: Werner Koch <wk@gnupg.org>
* src/trustdb.c (check_regexp): Correctly print whether the
regexp matched or not.
--
This patch fixes the log message displayed when gpg attempts to
match the regexp associated with a trust signature with an user ID.
The current message interprets the 'ret' variable backwards, and
displays 'YES' when the regexp actually fails to match.
Signed-off-by: Damien Goutte-Gattat <dgouttegattat@incenp.org>
* g10/trustdb.c (tdb_utks): New function.
* g10/tofu.c (check_utks): New function.
(initdb): Call it.
* tests/openpgp/tofu.scm: Modify test to check the effective policy of
keys whose effective policy changes when we change the set of UTKs.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
If the set of ultimately trusted keys changes, then it is possible
that a binding's effective policy changes. To deal with this, we
detect when the set of ultimately trusted keys changes and invalidate
all cached policies.
* g10/trustdb.c (tdb_get_validity_core): If the signer's user id
subpacket is present, only consider matching user ids.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c: Include "sqrtu32.h".
(struct tofu_dbs_s.s): Rename get_trust_gather_other_keys to
get_trust_gather_signature_stats. Add new field
get_trust_gather_encryption_stats.
(initdb): Create the encryptions table.
(ask_about_binding): Show the encryption statistics too.
(tofu_register): Rename from this...
(tofu_register_signature): ... to this and update callers.
(tofu_register_encryption): New function.
(write_stats_status): Add parameters encryption_count,
encryption_first_done and encryption_most_recent. Update callers.
Compute the trust using the euclidean distance of the signature and
signature count. Compare with twice the threshold. Include
encryption count information in the TFS and TOFU_STATS lines.
(show_statistics): Also get information about the encrypted messages.
* g10/trustdb.c (tdb_get_validity_core): Use it.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/tofu.c (tofu_register): Take a list of user ids, not a single
user id. Only register the bindings, don't compute the trust. Thus,
change return type to an int and remove the may_ask parameter. Update
callers.
(tofu_get_validity): Take a list of user ids, not a single user id.
Update callers. Observe signatures made by expired user ids, but
don't include them in the trust calculation.
--
Signed-off-by: Neal H. Walfield <neal@g10code.com>
* g10/gpg.h (struct tofu_dbs_s, tofu_dbs_t): New declarations.
(struct server_control_s): Add field tofu.dbs.
* g10/tofu.c (struct dbs): Rename to tofu_dbs_s. Replace all users by
by tofu_dbs_t.
(opendbs): Add arg CTRL. Cache the DBS in CTRL.
(closedbs): Rename to tofu_closedbs and make global. Add arg CTRL.
(tofu_register): Add arg CTRL. Change all callers. Do not call
closedbs.
(tofu_get_validity): Ditto.
(tofu_set_policy): Ditto.
(tofu_get_policy): Ditto.
(tofu_set_policy_by_keyid): Add arg CTRL.
* g10/gpg.c (gpg_deinit_default_ctrl): Call tofu_closedbs.
Signed-off-by: Werner Koch <wk@gnupg.org>
