* scd/app-openpgp.c (pin2hash_if_kdf): DEK had been changed to pointer
to allocated memory, so, we need to use DEKLEN for the length.
--
GnuPG-bug-id: 7121
Fixes-commit: 20e85585ed
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
* scd/app-openpgp.c (do_change_pin): Fix PIN length check. Add "R"
flag to the reset code prompt.
--
When using the reset code it was not possible to set a PIN of length
6. The "R" flags fixes a funny prompt.
Fixes-commit: efe325ffdf
* scd/app-openpgp.c (do_change_pin): Make sure new PIN length
is longer than MINLEN.
--
GnuPG-bug-id: 6843
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 2376cdff13)
* scd/app-openpgp.c (wipe_and_free_string, wipe_and_free): Enable
functions.
(pin2hash_if_kdf): Change interface. The input PIN is not anymore
changed. Further there are no more assumptions about the length of
the provided buffer.
(verify_a_chv): Adjust for changed pin2hash_if_kdf.
(verify_chv2): Ditto
(verify_chv3): Ditto.
(do_change_pin): Ditto.
(do_sign): Ditto.
--
Note that this a part of the patch
63bda3aad8 which we used in 2.4 to
implement a PIN cache. For easier backporting we need to add this
here.
* scd/app-openpgp.c (ecc_writekey): Remove the useless check and print
a diagnostic if the default params are used.
--
Note that here in 2.2 we use different default ECDH parameters than in
2.4 (AES192 instead of AES256 for 384 bit curves).
GnuPG-bug-id: 6378
* scd/app-openpgp.c (check_keyidstr): Ignore the card version and also
compare case insensitive.
(do_learn_status): Add mssing error handling.
--
This is required because we changed what we emit as serialno of
OpenPGP cards but existing keys still use the old form of the serial
number (i.e. with a firmware version). This is so that existing stub
keys of gpg-agent will continue to work.
GnuPG-bug-id: 5100
* scd/app-openpgp.c (do_readkey): Allow the keygrip for the keyid.
Use case insensitive match forthe keyid.
(do_readcert): Allow the keygrip for the keyid.
--
This patch is only to sync ths up with master.
* scd/app-openpgp.c (retrieve_fprtime_from_card): New.
(send_keypair_info): Add more to KEYPAIRINFO.
--
This is mainly needed to sync this version with master.
* scd/app-openpgp.c (wipe_and_free): New.
(wipe_and_free_string): New.
(get_disp_serialno): Remove. Replace callers by function
app_get_dispserialno.
(get_usage_string): New.
(send_keypair_info): Use new function.
--
The new function has the same behaviour. The wipe functions are
not yet used.
* cd/app-openpgp.c (data_objects): Add 0x00FA.
(do_getattr): Add KEY-ATTR-INFO.
--
See the section 4.4.3.11 Algorithm Information in the OpenPGP card
functional specification version 3.4.1.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 90d0072165)
Some parts where already here.
* scd/app-openpgp.c (do_getattr): New attrubute "UIF".
(do_learn_status): Use that.
--
Actually this is not just convenience but will make it easier to add
new keys to an openpgp card - we will need to change this only at one
place.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 11f0700282)
* scd/app-openpgp.c (struct app_local_s): Add ecc.algo field.
(send_key_attr): Use ecc.algo field.
(ecc_read_pubkey): Use ecc.algo field.
(ecc_writekey): Ed448 means EdDSA.
(parse_algorithm_attribute): Set ecc.algo field from card.
Add checking for Ed25519 for ECC_FLAG_DJB_TWEAK flag.
--
There used to be a possible support of Ed25519 with ECDSA, (instead of
EdDSA). To distinguish key for Ed25519 for EdDSA, we use the
flag: (flags eddsa). Ed448 has no support for ECDSA and defaults to
EdDSA even if no such flag.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit b743942a97)
* scd/app-openpgp.c (ecc_writekey): Use provided ECDH params to
compute the fingerprint. Add a default for use by gnupg 2.2.
(store_fpr): Add arg update.
(rsa_read_pubkey, ecc_read_pubkey): Add arg meta_update and avoid
writing the fingerprint back to the card if not set.
(read_public_key): Also add arg meta_update.
(get_public_key): Do not pass it as true here...
(do_genkey): ... but here.
--
This is based on commit c03ba92576 and
done here to ease backporting. There is no functional change.
GnuPG-bug-id: 6378
* scd/app-openpgp.c (data_objects): Capitalize the word for usage.
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit e6b7e0ff99)
* g10/card-util.c (uif, cmdUIF): New.
(card_edit): Add call to uif by cmdUIF.
* scd/app-openpgp.c (do_getattr): Support UIF-1, UIF-2, and UIF-3.
(do_setattr): Likewise.
(do_learn_status): Learn UIF-1, UIF-2, and UIF-3.
--
GnuPG-bug-id: 4158
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 0cb65564e0)
Also included the relevant part from
commit 0240345728
Note that this patch is mainly to simplifying backporting and not to
support the UIF.
* scd/app-openpgp.c (struct app_local_s): Add new flag.
(get_cached_data): Force chace use if flag is set.
(app_select_openpgp): Avoid reading DO 6E multiple times.
--
The do not cache property of 6E was introduced so that we can change
for example key attributes without getting into with the cache.
However, for initial reading the cache makes a lot of sense and thus we
now use this hack to only temporary cache. A better strategy would be
to clear the cache when we change card data but that is more error
prone.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d5fb598323)
* scd/iso7816.c (CMD_SELECT_DATA): New.
(iso7816_select_data): New.
* scd/app-openpgp.c (do_readcert): Allow OpenPGP.1 and OPENPGP.2
(do_writecert): Ditto.
(do_setattr): Add CERT-1 and CERT-2.
--
This has been tested with a Zeitcontrol 3.4 card. A test with a
Yubikey 5 (firmware 5.2.6) claiming to support 3.4 failed.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 37b1c5c200)
* scd/app-openpgp.c (do_change_pin): Allow prefixing the CHVNO with
"OPENPGP."
--
The generic keyref allows for better error detection in case a keyref
is send to a wrong card. This has been taken from master commit
3231ecdafd which has additional changed
for gpg-card-tool, which is only available there.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit 6651a0640d)
* scd/app-openpgp.c (count_sos_bits): New. Count as sos_write does.
(store_fpr): For ECC, use count_sos_bits.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
(cherry picked from commit 95156ef9bf)
and
(cherry picked from commit f482e4bd12)
* scd/app-openpgp.c (struct app_local_s): s/extcap_v3/is_v3/.
s/max_certlen_3/max_certlen. Change users.
--
The extcap_v3 flag is set if the version is 3 or later and as such
does not only declare that the v3 extcap layout is used. Make this
clear by renaming.
Likewise for max_certlen_3.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit bbdb48ec0d)
* common/sexputil.c (get_rsa_pk_from_canon_sexp): Also allow private
keys.
(pubkey_algo_string): Ditto.
* scd/app-openpgp.c (do_writekey): Switch key attributes
--
The scd WRITEKEY command for OpenPGP cards missed proper support to
aautomagically switch key attributes based on the new key. We had
this only in GENKEY.
GnuPG-bug-id: 6378
* scd/app-openpgp.c (data_objects): 0x00FA for binary data.
(do_getattr): Parse the data and send it in status lines.
(get_algorithm_attribute_string): New.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Backported-from-master: eba2563dab
Backported-from-master: 43bbc25b0f
* scd/iso7816.c (iso7816_read_binary_ext): Handle the 0x6a86 SW the
same as 6b00.
* scd/apdu.c (apdu_get_atr): Modify debug messages.
* scd/app-p15.c (app_select_p15): Print FCI on error.
(read_p15_info): Clean up diag in presence of debug options.
--
Some cards return 6a86 instead of 6b00.
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 44f977d0e3
* scd/app-p15.c (read_ef_prkdf, read_ef_pukdf)
(read_ef_cdf, read_ef_aodf): Allow for a zero length path and
correctly skip unsupported auth types.
--
Signed-off-by: Werner Koch <wk@gnupg.org>
Backported-from-master: 7a8545c91b
* scd/app-openpgp.c (struct app_local_s): Add field keyalgo.
(parse_algorithm_attribute): Store the new keyalgo field.
(change_keyattr): Change info message.
(change_keyattr_from_string): Rewrite to also accept a keyref and a
keyalgo string.
(do_genkey): Change the keyattr if a keyalgo string is given.
* scd/command.c (cmd_genkey): Add option --algo.
--
Having this feature makes it easier to use OpenPGP cards in a similar
way to other cards. Note that the explicit changing via SETATTR is
still supported.
Signed-off-by: Werner Koch <wk@gnupg.org>
(cherry picked from commit d7d75da505)
(cherry picked from commit b349adc5c0)
* scd/app-p15.c (select_and_read_record): Special case deleted
records. Support 3 byte TLVs.
(read_ef_prkdf): Skip deleted records.
(read_ef_pukdf): Ditto.
(read_ef_cdf): Ditto.
(read_ef_aodf): Ditto.
--
This fixes a problem with some CardOS 5 applications.
* scd/apdu.c (pcsc_send_apdu) [DBG_CARD_IO]: Detect and redact a
VERIFY.
(send_apdu_ccid): Ditto.
--
This should handle the most common case.
GnuPG-bug-id: 5085
* scd/app-nks.c (do_learn_status_core): Use new flag.
* scd/app-sc-hsm.c (do_learn_status): Ditto.
--
The flag was already backported to some apps but not to these.
* scd/app-nks.c (filelist): Tweak 0x4531.
--
Actually the certificate has no encryption usage but we should also
tell that via KEYINFO so that this key is never tried to create an
encryption certificate.
(cherry picked from commit 3a2fb1c306)
* scd/app-nks.c (find_fid_by_keyref): Factor keyref parsing out to ...
(parse_keyref): new.
(do_readcert): Use new function instead of partly duplicated code.
Make detection of keygrip more robust.
(do_readkey): Make detection of keygrip more robust.
(do_with_keygrip): Use get_nks_tag.
--
Also added a couple of comments.
(cherry picked from commit b92b3206e7)
* scd/app-nks.c (find_fid_by_keyref): Disable the cache for now.
(readcert_from_ef): Considere an all zero certificate as not found.
(do_sign): Support ECC and the ESIGN application.
--
This allows me to create qualified signatures using my Telesec card.
There is of course more work to do but this is the first step.
Note: The design of the FID cache needs to be reconsidered. Until
that the lookup here has been disabled. The do_sign code should be
revamped to be similar to what we do in app-p15.
GnuPG-bug-id: 5219, 4938, 6252
Backported-from-master: 07eaf006c2
* scd/app-nks.c (set_usage_string): New.
(do_learn_status_core, do_readkey): Use set_usage_string.
(do_with_keygrip): Add USAGE to call send_keyinfo,
using set_usage_string.
* scd/command.c (send_keyinfo): Add arg usage.
--
Signed-off-by: NIIBE Yutaka <gniibe@fsij.org>
Backported-from-master: 5264d3f58e
GnuPG-bug-id: 6252
This backports only the NKS parts of the original patch
Signed-off-by: Werner Koch <wk@gnupg.org>
NIIBE Yutaka