diff --git a/g10/ChangeLog b/g10/ChangeLog index 6ba694e4a..68255f01b 100644 --- a/g10/ChangeLog +++ b/g10/ChangeLog @@ -1,3 +1,7 @@ +Wed Jan 13 14:10:15 CET 1999 Werner Koch + + * armor.c (radix64_read): Print an error if a bad armor was detected. + Wed Jan 13 12:49:36 CET 1999 Werner Koch * armor.c (radix64_read): Now handles malformed armors produced diff --git a/g10/armor.c b/g10/armor.c index 99142a70f..1f23c6f64 100644 --- a/g10/armor.c +++ b/g10/armor.c @@ -646,6 +646,7 @@ radix64_read( armor_filter_context_t *afx, IOBUF a, size_t *retn, c <<= 4; c |= isdigit(c2)? (c2 - '0'): (toupper(c2)-'A'+10); afx->buffer_pos += 2; + afx->qp_detected = 1; goto again; } } @@ -1027,6 +1028,10 @@ armor_filter( void *opaque, int control, if( afx->truncated ) log_info(_("invalid armor: line longer than %d characters\n"), MAX_LINELEN ); + /* issue an error to enforce dissemination of correct software */ + if( afx->qp_detected ) + log_error(_("quoted printable character in armor - " + "probably a buggy MTA has been used\n") ); m_free( afx->buffer ); afx->buffer = NULL; } diff --git a/g10/filter.h b/g10/filter.h index 46e3f8a54..f0448f1bd 100644 --- a/g10/filter.h +++ b/g10/filter.h @@ -42,6 +42,7 @@ typedef struct { int hashes; /* detected hash algorithms */ int faked; /* we are faking a literal data packet */ int truncated; /* number of truncated lines */ + int qp_detected; byte *buffer; /* malloced buffer */ unsigned buffer_size; /* and size of this buffer */ diff --git a/include/iobuf.h b/include/iobuf.h index a88a59936..9f4e8e72c 100644 --- a/include/iobuf.h +++ b/include/iobuf.h @@ -73,6 +73,7 @@ IOBUF iobuf_alloc(int usage, size_t bufsize); IOBUF iobuf_temp(void); IOBUF iobuf_temp_with_content( const char *buffer, size_t length ); IOBUF iobuf_open( const char *fname ); +IOBUF iobuf_fdopen( int fd, const char *mode ); IOBUF iobuf_fopen( const char *fname, const char *mode ); IOBUF iobuf_create( const char *fname ); IOBUF iobuf_append( const char *fname ); diff --git a/util/ChangeLog b/util/ChangeLog index 596dd8f2c..7c4fb3bb7 100644 --- a/util/ChangeLog +++ b/util/ChangeLog @@ -1,3 +1,7 @@ +Wed Jan 13 14:10:15 CET 1999 Werner Koch + + * iobuf.c (iobuf_fdopen): New. + Sat Jan 9 16:02:23 CET 1999 Werner Koch * secmem.c (lock_pool): add another check that setuid() worked. diff --git a/util/iobuf.c b/util/iobuf.c index b6314527a..b62da6dfa 100644 --- a/util/iobuf.c +++ b/util/iobuf.c @@ -549,6 +549,38 @@ iobuf_open( const char *fname ) return a; } +/**************** + * Create a head iobuf for reading from a file + * returns: NULL if an error occures and sets errno + */ +IOBUF +iobuf_fdopen( int fd, const char *mode ) +{ + IOBUF a; + FILE *fp; + file_filter_ctx_t *fcx; + size_t len; + + if( strchr( mode, 'w' ) ) + log_bug("iobuf_fdopen: mode `%s' is not supported", mode); + + if( !(fp = fdopen(fd, mode)) ) + return NULL; + a = iobuf_alloc(1, 8192 ); + fcx = m_alloc( sizeof *fcx + 20 ); + fcx->fp = fp; + fcx->print_only_name = 1; + sprintf(fcx->fname, "[fd %d]", fd ); + a->filter = file_filter; + a->filter_ov = fcx; + file_filter( fcx, IOBUFCTRL_DESC, NULL, (byte*)&a->desc, &len ); + file_filter( fcx, IOBUFCTRL_INIT, NULL, NULL, &len ); + if( DBG_IOBUF ) + log_debug("iobuf-%d.%d: fdopen `%s'\n", a->no, a->subno, fcx->fname ); + + return a; +} + /**************** * create an iobuf for writing to a file; the file will be created. */ diff --git a/zlib/ChangeLog b/zlib/ChangeLog index e444a497e..5c0abb87b 100644 --- a/zlib/ChangeLog +++ b/zlib/ChangeLog @@ -1,4 +1,7 @@ - ChangeLog file for zlib +Wed Jan 13 14:10:15 CET 1999 Werner Koch + + + * Merged version 1.1.13 with the previousy used 1.0.4 Thu Feb 12 12:20:45 1998 Werner Koch (wk@frodo) @@ -7,6 +10,241 @@ Thu Feb 12 12:20:45 1998 Werner Koch (wk@frodo) - added automake stuff + ChangeLog file for zlib + + +Changes in 1.1.3 (9 July 1998) +- fix "an inflate input buffer bug that shows up on rare but persistent + occasions" (Mark) +- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) +- fix gzseek(..., SEEK_SET) in write mode +- fix crc check after a gzeek (Frank Faubert) +- fix miniunzip when the last entry in a zip file is itself a zip file + (J Lillge) +- add contrib/asm586 and contrib/asm686 (Brian Raiter) + See http://www.muppetlabs.com/~breadbox/software/assembly.html +- add support for Delphi 3 in contrib/delphi (Bob Dellaca) +- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) +- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) +- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) +- added a FAQ file + +- Support gzdopen on Mac with Metrowerks (Jason Linhart) +- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart) +- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young) +- avoid some warnings with Borland C (Tom Tanner) +- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant) +- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant) +- allow several arguments to configure (Tim Mooney, Frodo Looijaard) +- use libdir and includedir in Makefile.in (Tim Mooney) +- support shared libraries on OSF1 V4 (Tim Mooney) +- remove so_locations in "make clean" (Tim Mooney) +- fix maketree.c compilation error (Glenn, Mark) +- Python interface to zlib now in Python 1.5 (Jeremy Hylton) +- new Makefile.riscos (Rich Walker) +- initialize static descriptors in trees.c for embedded targets (Nick Smith) +- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith) +- add the OS/2 files in Makefile.in too (Andrew Zabolotny) +- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane) +- fix maketree.c to allow clean compilation of inffixed.h (Mark) +- fix parameter check in deflateCopy (Gunther Nikl) +- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler) +- Many portability patches by Christian Spieler: + . zutil.c, zutil.h: added "const" for zmem* + . Make_vms.com: fixed some typos + . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists + . msdos/Makefile.msc: remove "default rtl link library" info from obj files + . msdos/Makefile.*: use model-dependent name for the built zlib library + . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc: + new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT) +- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane) +- replace __far with _far for better portability (Christian Spieler, Tom Lane) +- fix test for errno.h in configure (Tim Newsham) + +Changes in 1.1.2 (19 March 98) +- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant) + See http://www.winimage.com/zLibDll/unzip.html +- preinitialize the inflate tables for fixed codes, to make the code + completely thread safe (Mark) +- some simplifications and slight speed-up to the inflate code (Mark) +- fix gzeof on non-compressed files (Allan Schrum) +- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs) +- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn) +- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny) +- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori) +- do not wrap extern "C" around system includes (Tom Lane) +- mention zlib binding for TCL in README (Andreas Kupries) +- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert) +- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson) +- allow "configure --prefix $HOME" (Tim Mooney) +- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson) +- move Makefile.sas to amiga/Makefile.sas + +Changes in 1.1.1 (27 Feb 98) +- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson) +- remove block truncation heuristic which had very marginal effect for zlib + (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the + compression ratio on some files. This also allows inlining _tr_tally for + matches in deflate_slow. +- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier) + +Changes in 1.1.0 (24 Feb 98) +- do not return STREAM_END prematurely in inflate (John Bowler) +- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler) +- compile with -DFASTEST to get compression code optimized for speed only +- in minigzip, try mmap'ing the input file first (Miguel Albrecht) +- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain + on Sun but significant on HP) + +- add a pointer to experimental unzip library in README (Gilles Vollant) +- initialize variable gcc in configure (Chris Herborth) + +Changes in 1.0.9 (17 Feb 1998) +- added gzputs and gzgets functions +- do not clear eof flag in gzseek (Mark Diekhans) +- fix gzseek for files in transparent mode (Mark Diekhans) +- do not assume that vsprintf returns the number of bytes written (Jens Krinke) +- replace EXPORT with ZEXPORT to avoid conflict with other programs +- added compress2 in zconf.h, zlib.def, zlib.dnt +- new asm code from Gilles Vollant in contrib/asm386 +- simplify the inflate code (Mark): + . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new() + . ZALLOC the length list in inflate_trees_fixed() instead of using stack + . ZALLOC the value area for huft_build() instead of using stack + . Simplify Z_FINISH check in inflate() + +- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8 +- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi) +- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with + the declaration of FAR (Gilles VOllant) +- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann) +- read_buf buf parameter of type Bytef* instead of charf* +- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout) +- do not redeclare unlink in minigzip.c for WIN32 (John Bowler) +- fix check for presence of directories in "make install" (Ian Willis) + +Changes in 1.0.8 (27 Jan 1998) +- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant) +- fix gzgetc and gzputc for big endian systems (Markus Oberhumer) +- added compress2() to allow setting the compression level +- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong) +- use constant arrays for the static trees in trees.c instead of computing + them at run time (thanks to Ken Raeburn for this suggestion). To create + trees.h, compile with GEN_TREES_H and run "make test". +- check return code of example in "make test" and display result +- pass minigzip command line options to file_compress +- simplifying code of inflateSync to avoid gcc 2.8 bug + +- support CC="gcc -Wall" in configure -s (QingLong) +- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn) +- fix test for shared library support to avoid compiler warnings +- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant) +- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit) +- do not use fdopen for Metrowerks on Mac (Brad Pettit)) +- add checks for gzputc and gzputc in example.c +- avoid warnings in gzio.c and deflate.c (Andreas Kleinert) +- use const for the CRC table (Ken Raeburn) +- fixed "make uninstall" for shared libraries +- use Tracev instead of Trace in infblock.c +- in example.c use correct compressed length for test_sync +- suppress +vnocompatwarnings in configure for HPUX (not always supported) + +Changes in 1.0.7 (20 Jan 1998) +- fix gzseek which was broken in write mode +- return error for gzseek to negative absolute position +- fix configure for Linux (Chun-Chung Chen) +- increase stack space for MSC (Tim Wegner) +- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant) +- define EXPORTVA for gzprintf (Gilles Vollant) +- added man page zlib.3 (Rick Rodgers) +- for contrib/untgz, fix makedir() and improve Makefile + +- check gzseek in write mode in example.c +- allocate extra buffer for seeks only if gzseek is actually called +- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant) +- add inflateSyncPoint in zconf.h +- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def + +Changes in 1.0.6 (19 Jan 1998) +- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and + gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code) +- Fix a deflate bug occuring only with compression level 0 (thanks to + Andy Buckler for finding this one). +- In minigzip, pass transparently also the first byte for .Z files. +- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress() +- check Z_FINISH in inflate (thanks to Marc Schluper) +- Implement deflateCopy (thanks to Adam Costello) +- make static libraries by default in configure, add --shared option. +- move MSDOS or Windows specific files to directory msdos +- suppress the notion of partial flush to simplify the interface + (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4) +- suppress history buffer provided by application to simplify the interface + (this feature was not implemented anyway in 1.0.4) +- next_in and avail_in must be initialized before calling inflateInit or + inflateInit2 +- add EXPORT in all exported functions (for Windows DLL) +- added Makefile.nt (thanks to Stephen Williams) +- added the unsupported "contrib" directory: + contrib/asm386/ by Gilles Vollant + 386 asm code replacing longest_match(). + contrib/iostream/ by Kevin Ruland + A C++ I/O streams interface to the zlib gz* functions + contrib/iostream2/ by Tyge Løvset + Another C++ I/O streams interface + contrib/untgz/ by "Pedro A. Aranda Guti\irrez" + A very simple tar.gz file extractor using zlib + contrib/visual-basic.txt by Carlos Rios + How to use compress(), uncompress() and the gz* functions from VB. +- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression + level) in minigzip (thanks to Tom Lane) + +- use const for rommable constants in deflate +- added test for gzseek and gztell in example.c +- add undocumented function inflateSyncPoint() (hack for Paul Mackerras) +- add undocumented function zError to convert error code to string + (for Tim Smithers) +- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code. +- Use default memcpy for Symantec MSDOS compiler. +- Add EXPORT keyword for check_func (needed for Windows DLL) +- add current directory to LD_LIBRARY_PATH for "make test" +- create also a link for libz.so.1 +- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura) +- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX) +- added -soname for Linux in configure (Chun-Chung Chen, +- assign numbers to the exported functions in zlib.def (for Windows DLL) +- add advice in zlib.h for best usage of deflateSetDictionary +- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn) +- allow compilation with ANSI keywords only enabled for TurboC in large model +- avoid "versionString"[0] (Borland bug) +- add NEED_DUMMY_RETURN for Borland +- use variable z_verbose for tracing in debug mode (L. Peter Deutsch). +- allow compilation with CC +- defined STDC for OS/2 (David Charlap) +- limit external names to 8 chars for MVS (Thomas Lund) +- in minigzip.c, use static buffers only for 16-bit systems +- fix suffix check for "minigzip -d foo.gz" +- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee) +- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau) +- added makelcc.bat for lcc-win32 (Tom St Denis) +- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe) +- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion. +- check for unistd.h in configure (for off_t) +- remove useless check parameter in inflate_blocks_free +- avoid useless assignment of s->check to itself in inflate_blocks_new +- do not flush twice in gzclose (thanks to Ken Raeburn) +- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h +- use NO_ERRNO_H instead of enumeration of operating systems with errno.h +- work around buggy fclose on pipes for HP/UX +- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson) +- fix configure if CC is already equal to gcc + +Changes in 1.0.5 (3 Jan 98) +- Fix inflate to terminate gracefully when fed corrupted or invalid data +- Use const for rommable constants in inflate +- Eliminate memory leaks on error conditions in inflate +- Removed some vestigial code in inflate +- Update web address in README + Changes in 1.0.4 (24 Jul 96) - In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF bit, so the decompressor could decompress all the correct data but went diff --git a/zlib/README b/zlib/README index 28adc90b2..8ff458799 100644 --- a/zlib/README +++ b/zlib/README @@ -1,74 +1,123 @@ -zlib 1.0.4 is a general purpose data compression library. All the code -is reentrant (thread safe). The data format used by the zlib library +zlib 1.1.3 is a general purpose data compression library. All the code +is thread safe. The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). These documents are also available in other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html -All functions of the compression library are documented in the file -zlib.h. A usage example of the library is given in the file example.c -which also tests that the library is working correctly. Another -example is given in the file minigzip.c. The compression library itself -is composed of all source files except example.c and minigzip.c. +All functions of the compression library are documented in the file zlib.h +(volunteer to write man pages welcome, contact jloup@gzip.org). A usage +example of the library is given in the file example.c which also tests that +the library is working correctly. Another example is given in the file +minigzip.c. The compression library itself is composed of all source files +except example.c and minigzip.c. To compile all files and run the test program, follow the instructions given at the top of Makefile. In short "make test; make install" -should work for most machines. For MSDOS, use one of the special -makefiles such as Makefile.msc; for VMS, use Make_vms.com or descrip.mms. +should work for most machines. For Unix: "configure; make test; make install" +For MSDOS, use one of the special makefiles such as Makefile.msc. +For VMS, use Make_vms.com or descrip.mms. -Questions about zlib should be sent to or, -if this fails, to the addresses given below in the Copyright section. -The zlib home page is http://quest.jpl.nasa.gov/zlib/ +Questions about zlib should be sent to , or to +Gilles Vollant for the Windows DLL version. +The zlib home page is http://www.cdrom.com/pub/infozip/zlib/ +The official zlib ftp site is ftp://ftp.cdrom.com/pub/infozip/zlib/ +Before reporting a problem, please check those sites to verify that +you have the latest version of zlib; otherwise get the latest version and +check whether the problem still exists or not. -The changes made in version 1.0.4 are documented in the file ChangeLog. -The main changes since 1.0.3 are: +Mark Nelson wrote an article about zlib for the Jan. 1997 +issue of Dr. Dobb's Journal; a copy of the article is available in +http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm -- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF - bit, so the decompressor could decompress all the correct data but went - on to attempt decompressing extra garbage data. This affected minigzip too. -- zlibVersion and gzerror return const char* (needed for DLL) -- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno) +The changes made in version 1.1.3 are documented in the file ChangeLog. +The main changes since 1.1.2 are: +- fix "an inflate input buffer bug that shows up on rare but persistent + occasions" (Mark) +- fix gzread and gztell for concatenated .gz files (Didier Le Botlan) +- fix gzseek(..., SEEK_SET) in write mode +- fix crc check after a gzeek (Frank Faubert) +- fix miniunzip when the last entry in a zip file is itself a zip file + (J Lillge) +- add contrib/asm586 and contrib/asm686 (Brian Raiter) + See http://www.muppetlabs.com/~breadbox/software/assembly.html +- add support for Delphi 3 in contrib/delphi (Bob Dellaca) +- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti) +- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren) +- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks) +- added a FAQ file + +plus many changes for portability. + +Unsupported third party contributions are provided in directory "contrib". + +A Java implementation of zlib is available in the Java Development Kit 1.1 +http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html +See the zlib home page http://www.cdrom.com/pub/infozip/zlib/ for details. A Perl interface to zlib written by Paul Marquess is in the CPAN (Comprehensive Perl Archive Network) sites, such as: ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib* +A Python interface to zlib written by A.M. Kuchling +is available in Python 1.5 and later versions, see +http://www.python.org/doc/lib/module-zlib.html + +A zlib binding for TCL written by Andreas Kupries +is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html + +An experimental package to read and write files in .zip format, +written on top of zlib by Gilles Vollant , is +available at http://www.winimage.com/zLibDll/unzip.html +and also in the contrib/minizip directory of zlib. + Notes for some targets: -- For Turbo C the small model is supported only with reduced performance to - avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 +- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc + and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL + The zlib DLL support was initially done by Alessandro Iacopetti and is + now maintained by Gilles Vollant . Check the zlib DLL + home page at http://www.winimage.com/zLibDll -- For 64-bit Iris, deflate.c must be compiled without any optimization. + From Visual Basic, you can call the DLL functions which do not take + a structure as argument: compress, uncompress and all gz* functions. + See contrib/visual-basic.txt for more information, or get + http://www.tcfb.com/dowseware/cmp-z-it.zip + +- For 64-bit Irix, deflate.c must be compiled without any optimization. With -O, one libpng test fails. The test works in 32 bit mode (with - the -32 compiler flag). The compiler bug has been reported to SGI. + the -n32 compiler flag). The compiler bug has been reported to SGI. - zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works when compiled with cc. -- zlib doesn't work on HP-UX 9.05 with one cc compiler (the one not - accepting the -O option). It works with the other cc compiler. +- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 + is necessary to get gzprintf working correctly. This is done by configure. -- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc - and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL - For help on building a zlib DLL, contact Alessandro Iacopetti - http://lisa.unial.it/iaco , - or contact Brad Clarke . +- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works + with other compilers. Use "make test" to check your compiler. -- gzdopen is not supported on RISCOS +- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers. + +- For Turbo C the small model is supported only with reduced performance to + avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3 + +- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html + Per Harald Myrvang Acknowledgments: The deflate format used by zlib was defined by Phil Katz. The deflate - and zlib specifications were written by Peter Deutsch. Thanks to all the + and zlib specifications were written by L. Peter Deutsch. Thanks to all the people who reported problems and suggested various improvements in zlib; they are too numerous to cite here. Copyright notice: - (C) 1995-1996 Jean-loup Gailly and Mark Adler + (C) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -87,7 +136,7 @@ Copyright notice: 3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler - gzip@prep.ai.mit.edu madler@alumni.caltech.edu + jloup@gzip.org madler@alumni.caltech.edu If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided diff --git a/zlib/adler32.c b/zlib/adler32.c index 471bdfd87..16cf9a703 100644 --- a/zlib/adler32.c +++ b/zlib/adler32.c @@ -1,9 +1,9 @@ /* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ -/* $Id$ */ +/* @(#) $Id$ */ #include "zlib.h" @@ -18,7 +18,7 @@ #define DO16(buf) DO8(buf,0); DO8(buf,8); /* ========================================================================= */ -uLong adler32(adler, buf, len) +uLong ZEXPORT adler32(adler, buf, len) uLong adler; const Bytef *buf; uInt len; diff --git a/zlib/compress.c b/zlib/compress.c index a4b393306..1cee47091 100644 --- a/zlib/compress.c +++ b/zlib/compress.c @@ -1,29 +1,29 @@ /* compress.c -- compress a memory buffer - * Copyright (C) 1995-1996 Jean-loup Gailly. + * Copyright (C) 1995-1998 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ -/* $Id$ */ +/* @(#) $Id$ */ #include "zlib.h" /* =========================================================================== - Compresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be at least 0.1% larger than - sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the - compressed buffer. - This function can be used to compress a whole file at once if the - input file is mmap'ed. - compress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer. + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least 0.1% larger than sourceLen plus + 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. */ -int compress (dest, destLen, source, sourceLen) +int ZEXPORT compress2 (dest, destLen, source, sourceLen, level) Bytef *dest; uLongf *destLen; const Bytef *source; uLong sourceLen; + int level; { z_stream stream; int err; @@ -42,7 +42,7 @@ int compress (dest, destLen, source, sourceLen) stream.zfree = (free_func)0; stream.opaque = (voidpf)0; - err = deflateInit(&stream, Z_DEFAULT_COMPRESSION); + err = deflateInit(&stream, level); if (err != Z_OK) return err; err = deflate(&stream, Z_FINISH); @@ -55,3 +55,14 @@ int compress (dest, destLen, source, sourceLen) err = deflateEnd(&stream); return err; } + +/* =========================================================================== + */ +int ZEXPORT compress (dest, destLen, source, sourceLen) + Bytef *dest; + uLongf *destLen; + const Bytef *source; + uLong sourceLen; +{ + return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); +} diff --git a/zlib/crc32.c b/zlib/crc32.c index 259b2bdff..a91101a81 100644 --- a/zlib/crc32.c +++ b/zlib/crc32.c @@ -1,9 +1,9 @@ /* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ -/* $Id$ */ +/* @(#) $Id$ */ #include "zlib.h" @@ -45,7 +45,7 @@ local void make_crc_table() int n, k; uLong poly; /* polynomial exclusive-or pattern */ /* terms of polynomial defining this crc (except x^32): */ - static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; + static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; /* make exclusive-or pattern from polynomial (0xedb88320L) */ poly = 0L; @@ -65,7 +65,7 @@ local void make_crc_table() /* ======================================================================== * Table of CRC-32's of all single-byte values (made by make_crc_table) */ -local uLongf crc_table[256] = { +local const uLongf crc_table[256] = { 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, @@ -124,12 +124,12 @@ local uLongf crc_table[256] = { /* ========================================================================= * This function can be used by asm versions of crc32() */ -uLongf *get_crc_table() +const uLongf * ZEXPORT get_crc_table() { #ifdef DYNAMIC_CRC_TABLE if (crc_table_empty) make_crc_table(); #endif - return (uLongf *)crc_table; + return (const uLongf *)crc_table; } /* ========================================================================= */ @@ -139,7 +139,7 @@ uLongf *get_crc_table() #define DO8(buf) DO4(buf); DO4(buf); /* ========================================================================= */ -uLong crc32(crc, buf, len) +uLong ZEXPORT crc32(crc, buf, len) uLong crc; const Bytef *buf; uInt len; diff --git a/zlib/deflate.c b/zlib/deflate.c index 26aaf58ef..25d5818e2 100644 --- a/zlib/deflate.c +++ b/zlib/deflate.c @@ -1,5 +1,5 @@ /* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-1996 Jean-loup Gailly. + * Copyright (C) 1995-1998 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -36,8 +36,8 @@ * * REFERENCES * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc + * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". + * Available in ftp://ds.internic.net/rfc/rfc1951.txt * * A description of the Rabin and Karp algorithm is given in the book * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. @@ -47,11 +47,12 @@ * */ -/* $Id$ */ +/* @(#) $Id$ */ #include "deflate.h" -char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly "; +const char deflate_copyright[] = + " deflate 1.1.3 Copyright 1995-1998 Jean-loup Gailly "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -77,12 +78,14 @@ local block_state deflate_stored OF((deflate_state *s, int flush)); local block_state deflate_fast OF((deflate_state *s, int flush)); local block_state deflate_slow OF((deflate_state *s, int flush)); local void lm_init OF((deflate_state *s)); -local uInt longest_match OF((deflate_state *s, IPos cur_match)); local void putShortMSB OF((deflate_state *s, uInt b)); local void flush_pending OF((z_streamp strm)); -local int read_buf OF((z_streamp strm, charf *buf, unsigned size)); +local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); #ifdef ASMV void match_init OF((void)); /* asm code initialization */ + uInt longest_match OF((deflate_state *s, IPos cur_match)); +#else +local uInt longest_match OF((deflate_state *s, IPos cur_match)); #endif #ifdef DEBUG @@ -120,7 +123,7 @@ typedef struct config_s { compress_func func; } config; -local config configuration_table[10] = { +local const config configuration_table[10] = { /* good lazy nice chain */ /* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ /* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */ @@ -157,14 +160,23 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ * Insert string str in the dictionary and set match_head to the previous head * of the hash chain (the most recent string with same hash key). Return * the previous length of the hash chain. + * If this file is compiled with -DFASTEST, the compression level is forced + * to 1, and no hash chains are maintained. * IN assertion: all calls to to INSERT_STRING are made with consecutive * input characters and the first MIN_MATCH bytes of str are valid * (except for the last MIN_MATCH-1 bytes of the input file). */ +#ifdef FASTEST +#define INSERT_STRING(s, str, match_head) \ + (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ + match_head = s->head[s->ins_h], \ + s->head[s->ins_h] = (Pos)(str)) +#else #define INSERT_STRING(s, str, match_head) \ (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \ s->head[s->ins_h] = (Pos)(str)) +#endif /* =========================================================================== * Initialize the hash table (avoiding 64K overflow for 16 bit systems). @@ -172,10 +184,10 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ */ #define CLEAR_HASH(s) \ s->head[s->hash_size-1] = NIL; \ - zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); + zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); /* ========================================================================= */ -int deflateInit_(strm, level, version, stream_size) +int ZEXPORT deflateInit_(strm, level, version, stream_size) z_streamp strm; int level; const char *version; @@ -187,7 +199,7 @@ int deflateInit_(strm, level, version, stream_size) } /* ========================================================================= */ -int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, +int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, version, stream_size) z_streamp strm; int level; @@ -200,13 +212,14 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, { deflate_state *s; int noheader = 0; + static const char* my_version = ZLIB_VERSION; ushf *overlay; /* We overlay pending_buf and d_buf+l_buf. This works since the average * output size for (length,distance) codes is <= 24 bits. */ - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || + if (version == Z_NULL || version[0] != my_version[0] || stream_size != sizeof(z_stream)) { return Z_VERSION_ERROR; } @@ -220,6 +233,9 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, if (strm->zfree == Z_NULL) strm->zfree = zcfree; if (level == Z_DEFAULT_COMPRESSION) level = 6; +#ifdef FASTEST + level = 1; +#endif if (windowBits < 0) { /* undocumented feature: suppress zlib header */ noheader = 1; @@ -253,6 +269,7 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); s->pending_buf = (uchf *) overlay; + s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || s->pending_buf == Z_NULL) { @@ -271,7 +288,7 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, } /* ========================================================================= */ -int deflateSetDictionary (strm, dictionary, dictLength) +int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) z_streamp strm; const Bytef *dictionary; uInt dictLength; @@ -290,9 +307,11 @@ int deflateSetDictionary (strm, dictionary, dictLength) if (length < MIN_MATCH) return Z_OK; if (length > MAX_DIST(s)) { length = MAX_DIST(s); - dictionary += dictLength - length; +#ifndef USE_DICT_HEAD + dictionary += dictLength - length; /* use the tail of the dictionary */ +#endif } - zmemcpy((charf *)s->window, dictionary, length); + zmemcpy(s->window, dictionary, length); s->strstart = length; s->block_start = (long)length; @@ -310,7 +329,7 @@ int deflateSetDictionary (strm, dictionary, dictLength) } /* ========================================================================= */ -int deflateReset (strm) +int ZEXPORT deflateReset (strm) z_streamp strm; { deflate_state *s; @@ -340,7 +359,7 @@ int deflateReset (strm) } /* ========================================================================= */ -int deflateParams(strm, level, strategy) +int ZEXPORT deflateParams(strm, level, strategy) z_streamp strm; int level; int strategy; @@ -414,7 +433,7 @@ local void flush_pending(strm) } /* ========================================================================= */ -int deflate (strm, flush) +int ZEXPORT deflate (strm, flush) z_streamp strm; int flush; { @@ -548,42 +567,87 @@ int deflate (strm, flush) } /* ========================================================================= */ -int deflateEnd (strm) +int ZEXPORT deflateEnd (strm) z_streamp strm; { int status; if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; + status = strm->state->status; + if (status != INIT_STATE && status != BUSY_STATE && + status != FINISH_STATE) { + return Z_STREAM_ERROR; + } + /* Deallocate in reverse order of allocations: */ TRY_FREE(strm, strm->state->pending_buf); TRY_FREE(strm, strm->state->head); TRY_FREE(strm, strm->state->prev); TRY_FREE(strm, strm->state->window); - status = strm->state->status; ZFREE(strm, strm->state); strm->state = Z_NULL; return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; } -/* ========================================================================= */ -int deflateCopy (dest, source) +/* ========================================================================= + * Copy the source state to the destination state. + * To simplify the source, this is not supported for 16-bit MSDOS (which + * doesn't have enough memory anyway to duplicate compression states). + */ +int ZEXPORT deflateCopy (dest, source) z_streamp dest; z_streamp source; { +#ifdef MAXSEG_64K + return Z_STREAM_ERROR; +#else + deflate_state *ds; + deflate_state *ss; + ushf *overlay; + + if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { return Z_STREAM_ERROR; } - *dest = *source; - return Z_STREAM_ERROR; /* to be implemented */ -#if 0 - dest->state = (struct internal_state FAR *) - (*dest->zalloc)(1, sizeof(deflate_state)); - if (dest->state == Z_NULL) return Z_MEM_ERROR; - *(dest->state) = *(source->state); + ss = source->state; + + *dest = *source; + + ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); + if (ds == Z_NULL) return Z_MEM_ERROR; + dest->state = (struct internal_state FAR *) ds; + *ds = *ss; + ds->strm = dest; + + ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); + ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); + ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); + overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); + ds->pending_buf = (uchf *) overlay; + + if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || + ds->pending_buf == Z_NULL) { + deflateEnd (dest); + return Z_MEM_ERROR; + } + /* following zmemcpy do not work for 16-bit MSDOS */ + zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); + zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); + zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); + zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); + + ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); + ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); + ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; + + ds->l_desc.dyn_tree = ds->dyn_ltree; + ds->d_desc.dyn_tree = ds->dyn_dtree; + ds->bl_desc.dyn_tree = ds->bl_tree; + return Z_OK; #endif } @@ -597,7 +661,7 @@ int deflateCopy (dest, source) */ local int read_buf(strm, buf, size) z_streamp strm; - charf *buf; + Bytef *buf; unsigned size; { unsigned len = strm->avail_in; @@ -658,6 +722,7 @@ local void lm_init (s) /* For 80x86 and 680x0, an optimized version will be provided in match.asm or * match.S. The code will be functionally equivalent. */ +#ifndef FASTEST local uInt longest_match(s, cur_match) deflate_state *s; IPos cur_match; /* current match */ @@ -792,9 +857,67 @@ local uInt longest_match(s, cur_match) } while ((cur_match = prev[cur_match & wmask]) > limit && --chain_length != 0); - if ((uInt)best_len <= s->lookahead) return best_len; + if ((uInt)best_len <= s->lookahead) return (uInt)best_len; return s->lookahead; } + +#else /* FASTEST */ +/* --------------------------------------------------------------------------- + * Optimized version for level == 1 only + */ +local uInt longest_match(s, cur_match) + deflate_state *s; + IPos cur_match; /* current match */ +{ + register Bytef *scan = s->window + s->strstart; /* current string */ + register Bytef *match; /* matched string */ + register int len; /* length of current match */ + register Bytef *strend = s->window + s->strstart + MAX_MATCH; + + /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ + Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); + + Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); + + Assert(cur_match < s->strstart, "no future"); + + match = s->window + cur_match; + + /* Return failure if the match length is less than 2: + */ + if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; + + /* The check at best_len-1 can be removed because it will be made + * again later. (This heuristic is not always a win.) + * It is not necessary to compare scan[2] and match[2] since they + * are always equal when the other bytes match, given that + * the hash keys are equal and that HASH_BITS >= 8. + */ + scan += 2, match += 2; + Assert(*scan == *match, "match[2]?"); + + /* We check for insufficient lookahead only every 8th comparison; + * the 256th check will be made at strstart+258. + */ + do { + } while (*++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + *++scan == *++match && *++scan == *++match && + scan < strend); + + Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); + + len = MAX_MATCH - (int)(strend - scan); + + if (len < MIN_MATCH) return MIN_MATCH - 1; + + s->match_start = cur_match; + return len <= s->lookahead ? len : s->lookahead; +} +#endif /* FASTEST */ #endif /* ASMV */ #ifdef DEBUG @@ -807,8 +930,8 @@ local void check_match(s, start, match, length) int length; { /* check that the match is indeed a match */ - if (zmemcmp((charf *)s->window + match, - (charf *)s->window + start, length) != EQUAL) { + if (zmemcmp(s->window + match, + s->window + start, length) != EQUAL) { fprintf(stderr, " start %u, match %u, length %d\n", start, match, length); do { @@ -816,7 +939,7 @@ local void check_match(s, start, match, length) } while (--length != 0); z_error("invalid match"); } - if (verbose > 1) { + if (z_verbose > 1) { fprintf(stderr,"\\[%d,%d]", start-match, length); do { putc(s->window[start++], stderr); } while (--length != 0); } @@ -861,33 +984,35 @@ local void fill_window(s) */ } else if (s->strstart >= wsize+MAX_DIST(s)) { - zmemcpy((charf *)s->window, (charf *)s->window+wsize, - (unsigned)wsize); + zmemcpy(s->window, s->window+wsize, (unsigned)wsize); s->match_start -= wsize; s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ - s->block_start -= (long) wsize; /* Slide the hash table (could be avoided with 32 bit values - at the expense of memory usage): + at the expense of memory usage). We slide even when level == 0 + to keep the hash table consistent if we switch back to level > 0 + later. (Using level 0 permanently is not an optimal usage of + zlib, so we don't care about this pathological case.) */ - n = s->hash_size; - p = &s->head[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - } while (--n); - - n = wsize; - p = &s->prev[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - /* If n is not on any hash chain, prev[n] is garbage but - * its value will never be used. - */ - } while (--n); + n = s->hash_size; + p = &s->head[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + } while (--n); + n = wsize; +#ifndef FASTEST + p = &s->prev[n]; + do { + m = *--p; + *p = (Pos)(m >= wsize ? m-wsize : NIL); + /* If n is not on any hash chain, prev[n] is garbage but + * its value will never be used. + */ + } while (--n); +#endif more += wsize; } if (s->strm->avail_in == 0) return; @@ -905,8 +1030,7 @@ local void fill_window(s) */ Assert(more >= 2, "more < 2"); - n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead, - more); + n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); s->lookahead += n; /* Initialize the hash value now that we have some input: */ @@ -951,12 +1075,24 @@ local void fill_window(s) * This function does not insert new strings in the dictionary since * uncompressible data is probably not useful. This function is used * only for the level=0 compression option. - * NOTE: this function should be optimized to avoid extra copying. + * NOTE: this function should be optimized to avoid extra copying from + * window to pending_buf. */ local block_state deflate_stored(s, flush) deflate_state *s; int flush; { + /* Stored blocks are limited to 0xffff bytes, pending_buf is limited + * to pending_buf_size, and each stored block has a 5 byte header: + */ + ulg max_block_size = 0xffff; + ulg max_start; + + if (max_block_size > s->pending_buf_size - 5) { + max_block_size = s->pending_buf_size - 5; + } + + /* Copy as much as possible from input to output: */ for (;;) { /* Fill the window as much as possible: */ if (s->lookahead <= 1) { @@ -974,14 +1110,17 @@ local block_state deflate_stored(s, flush) s->strstart += s->lookahead; s->lookahead = 0; - /* Stored blocks are limited to 0xffff bytes: */ - if (s->strstart == 0 || s->strstart > 0xfffe) { + /* Emit a stored block if pending_buf will be full: */ + max_start = s->block_start + max_block_size; + if (s->strstart == 0 || (ulg)s->strstart >= max_start) { /* strstart == 0 is possible when wraparound on 16-bit machine */ - s->lookahead = s->strstart - 0xffff; - s->strstart = 0xffff; + s->lookahead = (uInt)(s->strstart - max_start); + s->strstart = (uInt)max_start; + FLUSH_BLOCK(s, 0); } - - /* Emit a stored block if it is large enough: */ + /* Flush if we may have to slide, otherwise block_start may become + * negative and the data will be gone: + */ if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { FLUSH_BLOCK(s, 0); } @@ -1041,14 +1180,15 @@ local block_state deflate_fast(s, flush) if (s->match_length >= MIN_MATCH) { check_match(s, s->strstart, s->match_start, s->match_length); - bflush = _tr_tally(s, s->strstart - s->match_start, - s->match_length - MIN_MATCH); + _tr_tally_dist(s, s->strstart - s->match_start, + s->match_length - MIN_MATCH, bflush); s->lookahead -= s->match_length; /* Insert new strings in the hash table only if the match length * is not too large. This saves time but degrades compression. */ +#ifndef FASTEST if (s->match_length <= s->max_insert_length && s->lookahead >= MIN_MATCH) { s->match_length--; /* string at strstart already in hash table */ @@ -1060,7 +1200,9 @@ local block_state deflate_fast(s, flush) */ } while (--s->match_length != 0); s->strstart++; - } else { + } else +#endif + { s->strstart += s->match_length; s->match_length = 0; s->ins_h = s->window[s->strstart]; @@ -1075,7 +1217,7 @@ local block_state deflate_fast(s, flush) } else { /* No match, output a literal byte */ Tracevv((stderr,"%c", s->window[s->strstart])); - bflush = _tr_tally (s, 0, s->window[s->strstart]); + _tr_tally_lit (s, s->window[s->strstart], bflush); s->lookahead--; s->strstart++; } @@ -1154,8 +1296,8 @@ local block_state deflate_slow(s, flush) check_match(s, s->strstart-1, s->prev_match, s->prev_length); - bflush = _tr_tally(s, s->strstart -1 - s->prev_match, - s->prev_length - MIN_MATCH); + _tr_tally_dist(s, s->strstart -1 - s->prev_match, + s->prev_length - MIN_MATCH, bflush); /* Insert in hash table all strings up to the end of the match. * strstart-1 and strstart are already inserted. If there is not @@ -1181,7 +1323,8 @@ local block_state deflate_slow(s, flush) * is longer, truncate the previous match to a single literal. */ Tracevv((stderr,"%c", s->window[s->strstart-1])); - if (_tr_tally (s, 0, s->window[s->strstart-1])) { + _tr_tally_lit(s, s->window[s->strstart-1], bflush); + if (bflush) { FLUSH_BLOCK_ONLY(s, 0); } s->strstart++; @@ -1199,7 +1342,7 @@ local block_state deflate_slow(s, flush) Assert (flush != Z_NO_FLUSH, "no flush?"); if (s->match_available) { Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally (s, 0, s->window[s->strstart-1]); + _tr_tally_lit(s, s->window[s->strstart-1], bflush); s->match_available = 0; } FLUSH_BLOCK(s, flush == Z_FINISH); diff --git a/zlib/deflate.h b/zlib/deflate.h index 410b21984..962676da8 100644 --- a/zlib/deflate.h +++ b/zlib/deflate.h @@ -1,5 +1,5 @@ /* deflate.h -- internal compression state - * Copyright (C) 1995-1996 Jean-loup Gailly + * Copyright (C) 1995-1998 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -8,7 +8,7 @@ subject to change. Applications should only use zlib.h. */ -/* $Id$ */ +/* @(#) $Id$ */ #ifndef _DEFLATE_H #define _DEFLATE_H @@ -83,6 +83,7 @@ typedef struct internal_state { z_streamp strm; /* pointer back to this zlib stream */ int status; /* as the name implies */ Bytef *pending_buf; /* output still pending */ + ulg pending_buf_size; /* size of pending_buf */ Bytef *pending_out; /* next pending byte to output to the stream */ int pending; /* nb of bytes in the pending buffer */ int noheader; /* suppress zlib header and adler32 */ @@ -229,12 +230,12 @@ typedef struct internal_state { ulg opt_len; /* bit length of current block with optimal trees */ ulg static_len; /* bit length of current block with static trees */ - ulg compressed_len; /* total bit length of compressed file */ uInt matches; /* number of string matches in current block */ int last_eob_len; /* bit length of EOB code for last block */ #ifdef DEBUG - ulg bits_sent; /* bit length of the compressed data */ + ulg compressed_len; /* total bit length of compressed file mod 2^32 */ + ulg bits_sent; /* bit length of compressed data sent mod 2^32 */ #endif ush bi_buf; @@ -267,9 +268,51 @@ typedef struct internal_state { /* in trees.c */ void _tr_init OF((deflate_state *s)); int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc)); -ulg _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, +void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, int eof)); void _tr_align OF((deflate_state *s)); void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len, int eof)); + +#define d_code(dist) \ + ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)]) +/* Mapping from a distance to a distance code. dist is the distance - 1 and + * must not have side effects. _dist_code[256] and _dist_code[257] are never + * used. + */ + +#ifndef DEBUG +/* Inline versions of _tr_tally for speed: */ + +#if defined(GEN_TREES_H) || !defined(STDC) + extern uch _length_code[]; + extern uch _dist_code[]; +#else + extern const uch _length_code[]; + extern const uch _dist_code[]; +#endif + +# define _tr_tally_lit(s, c, flush) \ + { uch cc = (c); \ + s->d_buf[s->last_lit] = 0; \ + s->l_buf[s->last_lit++] = cc; \ + s->dyn_ltree[cc].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +# define _tr_tally_dist(s, distance, length, flush) \ + { uch len = (length); \ + ush dist = (distance); \ + s->d_buf[s->last_lit] = dist; \ + s->l_buf[s->last_lit++] = len; \ + dist--; \ + s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \ + s->dyn_dtree[d_code(dist)].Freq++; \ + flush = (s->last_lit == s->lit_bufsize-1); \ + } +#else +# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c) +# define _tr_tally_dist(s, distance, length, flush) \ + flush = _tr_tally(s, distance, length) +#endif + #endif diff --git a/zlib/example.c b/zlib/example.c index 7c9176094..8307c841e 100644 --- a/zlib/example.c +++ b/zlib/example.c @@ -1,9 +1,9 @@ /* example.c -- usage example of the zlib compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. + * Copyright (C) 1995-1998 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ -/* $Id$ */ +/* @(#) $Id$ */ #include #include "zlib.h" @@ -15,6 +15,12 @@ extern void exit OF((int)); #endif +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + #define CHECK_ERR(err, msg) { \ if (err != Z_OK) { \ fprintf(stderr, "%s error: %d\n", msg, err); \ @@ -41,7 +47,7 @@ void test_large_deflate OF((Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)); void test_large_inflate OF((Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)); -void test_flush OF((Byte *compr, uLong comprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); void test_sync OF((Byte *compr, uLong comprLen, Byte *uncompr, uLong uncomprLen)); void test_dict_deflate OF((Byte *compr, uLong comprLen)); @@ -69,8 +75,9 @@ void test_compress(compr, comprLen, uncompr, uncomprLen) if (strcmp((char*)uncompr, hello)) { fprintf(stderr, "bad uncompress\n"); + exit(1); } else { - printf("uncompress(): %s\n", uncompr); + printf("uncompress(): %s\n", (char *)uncompr); } } @@ -78,24 +85,31 @@ void test_compress(compr, comprLen, uncompr, uncomprLen) * Test read/write of .gz files */ void test_gzio(out, in, uncompr, uncomprLen) - const char *out; /* output file */ - const char *in; /* input file */ + const char *out; /* compressed output file */ + const char *in; /* compressed input file */ Byte *uncompr; int uncomprLen; { int err; int len = strlen(hello)+1; gzFile file; + z_off_t pos; file = gzopen(out, "wb"); if (file == NULL) { fprintf(stderr, "gzopen error\n"); exit(1); } - - if (gzwrite(file, (const voidp)hello, (unsigned)len) != len) { - fprintf(stderr, "gzwrite err: %s\n", gzerror(file, &err)); + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); } + if (gzprintf(file, ", %s!", "hello") != 8) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ gzclose(file); file = gzopen(in, "rb"); @@ -107,14 +121,41 @@ void test_gzio(out, in, uncompr, uncomprLen) uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen); if (uncomprLen != len) { fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); } - gzclose(file); - if (strcmp((char*)uncompr, hello)) { - fprintf(stderr, "bad gzread\n"); + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); } else { - printf("gzread(): %s\n", uncompr); + printf("gzread(): %s\n", (char *)uncompr); } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, uncomprLen); + uncomprLen = strlen((char*)uncompr); + if (uncomprLen != 6) { /* "hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello+7)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char *)uncompr); + } + + gzclose(file); } /* =========================================================================== @@ -171,12 +212,13 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen) d_stream.zfree = (free_func)0; d_stream.opaque = (voidpf)0; + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + err = inflateInit(&d_stream); CHECK_ERR(err, "inflateInit"); - d_stream.next_in = compr; - d_stream.next_out = uncompr; - while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ err = inflate(&d_stream, Z_NO_FLUSH); @@ -189,8 +231,9 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen) if (strcmp((char*)uncompr, hello)) { fprintf(stderr, "bad inflate\n"); + exit(1); } else { - printf("inflate(): %s\n", uncompr); + printf("inflate(): %s\n", (char *)uncompr); } } @@ -223,6 +266,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen) CHECK_ERR(err, "deflate"); if (c_stream.avail_in != 0) { fprintf(stderr, "deflate not greedy\n"); + exit(1); } /* Feed in already compressed data and switch to no compression: */ @@ -242,6 +286,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen) err = deflate(&c_stream, Z_FINISH); if (err != Z_STREAM_END) { fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); } err = deflateEnd(&c_stream); CHECK_ERR(err, "deflateEnd"); @@ -263,12 +308,12 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen) d_stream.zfree = (free_func)0; d_stream.opaque = (voidpf)0; - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - d_stream.next_in = compr; d_stream.avail_in = (uInt)comprLen; + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + for (;;) { d_stream.next_out = uncompr; /* discard the output */ d_stream.avail_out = (uInt)uncomprLen; @@ -282,6 +327,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen) if (d_stream.total_out != 2*uncomprLen + comprLen/2) { fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); } else { printf("large_inflate(): OK\n"); } @@ -292,7 +338,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen) */ void test_flush(compr, comprLen) Byte *compr; - uLong comprLen; + uLong *comprLen; { z_stream c_stream; /* compression stream */ int err; @@ -308,7 +354,7 @@ void test_flush(compr, comprLen) c_stream.next_in = (Bytef*)hello; c_stream.next_out = compr; c_stream.avail_in = 3; - c_stream.avail_out = (uInt)comprLen; + c_stream.avail_out = (uInt)*comprLen; err = deflate(&c_stream, Z_FULL_FLUSH); CHECK_ERR(err, "deflate"); @@ -321,6 +367,8 @@ void test_flush(compr, comprLen) } err = deflateEnd(&c_stream); CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; } /* =========================================================================== @@ -339,12 +387,13 @@ void test_sync(compr, comprLen, uncompr, uncomprLen) d_stream.zfree = (free_func)0; d_stream.opaque = (voidpf)0; + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + err = inflateInit(&d_stream); CHECK_ERR(err, "inflateInit"); - d_stream.next_in = compr; d_stream.next_out = uncompr; - d_stream.avail_in = 2; /* just read the zlib header */ d_stream.avail_out = (uInt)uncomprLen; inflate(&d_stream, Z_NO_FLUSH); @@ -358,11 +407,12 @@ void test_sync(compr, comprLen, uncompr, uncomprLen) if (err != Z_DATA_ERROR) { fprintf(stderr, "inflate should report DATA_ERROR\n"); /* Because of incorrect adler32 */ + exit(1); } err = inflateEnd(&d_stream); CHECK_ERR(err, "inflateEnd"); - printf("after inflateSync(): hel%s\n", uncompr); + printf("after inflateSync(): hel%s\n", (char *)uncompr); } /* =========================================================================== @@ -396,6 +446,7 @@ void test_dict_deflate(compr, comprLen) err = deflate(&c_stream, Z_FINISH); if (err != Z_STREAM_END) { fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); } err = deflateEnd(&c_stream); CHECK_ERR(err, "deflateEnd"); @@ -417,12 +468,12 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) d_stream.zfree = (free_func)0; d_stream.opaque = (voidpf)0; - err = inflateInit(&d_stream); - CHECK_ERR(err, "inflateInit"); - d_stream.next_in = compr; d_stream.avail_in = (uInt)comprLen; + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + d_stream.next_out = uncompr; d_stream.avail_out = (uInt)uncomprLen; @@ -445,8 +496,9 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) if (strcmp((char*)uncompr, hello)) { fprintf(stderr, "bad inflate with dict\n"); + exit(1); } else { - printf("inflate with dictionary: %s\n", uncompr); + printf("inflate with dictionary: %s\n", (char *)uncompr); } } @@ -461,8 +513,9 @@ int main(argc, argv) Byte *compr, *uncompr; uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; - if (zlibVersion()[0] != ZLIB_VERSION[0]) { + if (zlibVersion()[0] != myVersion[0]) { fprintf(stderr, "incompatible zlib version\n"); exit(1); @@ -479,11 +532,10 @@ int main(argc, argv) printf("out of memory\n"); exit(1); } - test_compress(compr, comprLen, uncompr, uncomprLen); - test_gzio((argc > 1 ? argv[1] : "foo.gz"), - (argc > 2 ? argv[2] : "foo.gz"), + test_gzio((argc > 1 ? argv[1] : TESTFILE), + (argc > 2 ? argv[2] : TESTFILE), uncompr, (int)uncomprLen); test_deflate(compr, comprLen); @@ -492,8 +544,9 @@ int main(argc, argv) test_large_deflate(compr, comprLen, uncompr, uncomprLen); test_large_inflate(compr, comprLen, uncompr, uncomprLen); - test_flush(compr, comprLen); + test_flush(compr, &comprLen); test_sync(compr, comprLen, uncompr, uncomprLen); + comprLen = uncomprLen; test_dict_deflate(compr, comprLen); test_dict_inflate(compr, comprLen, uncompr, uncomprLen); diff --git a/zlib/gzio.c b/zlib/gzio.c index 1715539f7..f7c336a55 100644 --- a/zlib/gzio.c +++ b/zlib/gzio.c @@ -1,9 +1,11 @@ /* gzio.c -- IO on .gz files - * Copyright (C) 1995-1996 Jean-loup Gailly. + * Copyright (C) 1995-1998 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h + * + * Compile this file with -DNO_DEFLATE to avoid the compression code. */ -/* $Id$ */ +/* @(#) $Id$ */ #include @@ -11,7 +13,16 @@ struct internal_state {int dummy;}; /* for buggy compilers */ -#define Z_BUFSIZE 4096 +#ifndef Z_BUFSIZE +# ifdef MAXSEG_64K +# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */ +# else +# define Z_BUFSIZE 16384 +# endif +#endif +#ifndef Z_PRINTF_BUFSIZE +# define Z_PRINTF_BUFSIZE 4096 +#endif #define ALLOC(size) malloc(size) #define TRYFREE(p) {if (p) free(p);} @@ -38,10 +49,12 @@ typedef struct gz_stream { char *path; /* path name for debugging only */ int transparent; /* 1 if input file is not a .gz file */ char mode; /* 'w' or 'r' */ + long startpos; /* start of compressed data in file (header skipped) */ } gz_stream; local gzFile gz_open OF((const char *path, const char *mode, int fd)); +local int do_flush OF((gzFile file, int flush)); local int get_byte OF((gz_stream *s)); local void check_header OF((gz_stream *s)); local int destroy OF((gz_stream *s)); @@ -64,6 +77,7 @@ local gzFile gz_open (path, mode, fd) { int err; int level = Z_DEFAULT_COMPRESSION; /* compression level */ + int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */ char *p = (char*)mode; gz_stream *s; char fmode[80]; /* copy of mode, without the compression level */ @@ -99,6 +113,10 @@ local gzFile gz_open (path, mode, fd) if (*p == 'w' || *p == 'a') s->mode = 'w'; if (*p >= '0' && *p <= '9') { level = *p - '0'; + } else if (*p == 'f') { + strategy = Z_FILTERED; + } else if (*p == 'h') { + strategy = Z_HUFFMAN_ONLY; } else { *m++ = *p; /* copy the mode */ } @@ -106,19 +124,28 @@ local gzFile gz_open (path, mode, fd) if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL; if (s->mode == 'w') { +#ifdef NO_DEFLATE + err = Z_STREAM_ERROR; +#else err = deflateInit2(&(s->stream), level, - Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0); + Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy); /* windowBits is passed < 0 to suppress zlib header */ s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); - +#endif if (err != Z_OK || s->outbuf == Z_NULL) { return destroy(s), (gzFile)Z_NULL; } } else { - err = inflateInit2(&(s->stream), -MAX_WBITS); s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); + err = inflateInit2(&(s->stream), -MAX_WBITS); + /* windowBits is passed < 0 to tell that there is no zlib header. + * Note that in this case inflate *requires* an extra "dummy" byte + * after the compressed stream in order to complete decompression and + * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are + * present after the compressed stream. + */ if (err != Z_OK || s->inbuf == Z_NULL) { return destroy(s), (gzFile)Z_NULL; } @@ -126,7 +153,7 @@ local gzFile gz_open (path, mode, fd) s->stream.avail_out = Z_BUFSIZE; errno = 0; - s->file = fd < 0 ? FOPEN(path, fmode) : (FILE*)fdopen(fd, fmode); + s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode); if (s->file == NULL) { return destroy(s), (gzFile)Z_NULL; @@ -136,16 +163,24 @@ local gzFile gz_open (path, mode, fd) */ fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1], Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE); + s->startpos = 10L; + /* We use 10L instead of ftell(s->file) to because ftell causes an + * fflush on some systems. This version of the library doesn't use + * startpos anyway in write mode, so this initialization is not + * necessary. + */ } else { check_header(s); /* skip the .gz header */ + s->startpos = (ftell(s->file) - s->stream.avail_in); } + return (gzFile)s; } /* =========================================================================== Opens a gzip (.gz) file for reading or writing. */ -gzFile gzopen (path, mode) +gzFile ZEXPORT gzopen (path, mode) const char *path; const char *mode; { @@ -156,7 +191,7 @@ gzFile gzopen (path, mode) Associate a gzFile with the file descriptor fd. fd is not dup'ed here to mimic the behavio(u)r of fdopen. */ -gzFile gzdopen (fd, mode) +gzFile ZEXPORT gzdopen (fd, mode) int fd; const char *mode; { @@ -168,6 +203,31 @@ gzFile gzdopen (fd, mode) return gz_open (name, mode, fd); } +/* =========================================================================== + * Update the compression level and strategy + */ +int ZEXPORT gzsetparams (file, level, strategy) + gzFile file; + int level; + int strategy; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; + + /* Make room to allow flushing */ + if (s->stream.avail_out == 0) { + + s->stream.next_out = s->outbuf; + if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { + s->z_err = Z_ERRNO; + } + s->stream.avail_out = Z_BUFSIZE; + } + + return deflateParams (&(s->stream), level, strategy); +} + /* =========================================================================== Read a byte from a gz_stream; update next_in and avail_in. Return EOF for end of file. @@ -212,8 +272,11 @@ local void check_header(s) for (len = 0; len < 2; len++) { c = get_byte(s); if (c != gz_magic[len]) { - s->transparent = 1; - if (c != EOF) s->stream.avail_in++, s->stream.next_in--; + if (len != 0) s->stream.avail_in++, s->stream.next_in--; + if (c != EOF) { + s->stream.avail_in++, s->stream.next_in--; + s->transparent = 1; + } s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END; return; } @@ -260,14 +323,21 @@ local int destroy (s) TRYFREE(s->msg); if (s->stream.state != NULL) { - if (s->mode == 'w') { - err = deflateEnd(&(s->stream)); - } else if (s->mode == 'r') { - err = inflateEnd(&(s->stream)); - } + if (s->mode == 'w') { +#ifdef NO_DEFLATE + err = Z_STREAM_ERROR; +#else + err = deflateEnd(&(s->stream)); +#endif + } else if (s->mode == 'r') { + err = inflateEnd(&(s->stream)); + } } if (s->file != NULL && fclose(s->file)) { - err = Z_ERRNO; +#ifdef ESPIPE + if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */ +#endif + err = Z_ERRNO; } if (s->z_err < 0) err = s->z_err; @@ -282,13 +352,13 @@ local int destroy (s) Reads the given number of uncompressed bytes from the compressed file. gzread returns the number of bytes actually read (0 for end of file). */ -int gzread (file, buf, len) +int ZEXPORT gzread (file, buf, len) gzFile file; voidp buf; unsigned len; { gz_stream *s = (gz_stream*)file; - Bytef *start = buf; /* starting point for crc computation */ + Bytef *start = (Bytef*)buf; /* starting point for crc computation */ Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */ if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR; @@ -296,7 +366,8 @@ int gzread (file, buf, len) if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1; if (s->z_err == Z_STREAM_END) return 0; /* EOF */ - s->stream.next_out = next_out = buf; + next_out = (Byte*)buf; + s->stream.next_out = (Bytef*)buf; s->stream.avail_out = len; while (s->stream.avail_out != 0) { @@ -317,7 +388,11 @@ int gzread (file, buf, len) s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out, s->file); } - return (int)(len - s->stream.avail_out); + len -= s->stream.avail_out; + s->stream.total_in += (uLong)len; + s->stream.total_out += (uLong)len; + if (len == 0) s->z_eof = 1; + return (int)len; } if (s->stream.avail_in == 0 && !s->z_eof) { @@ -339,13 +414,22 @@ int gzread (file, buf, len) s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); start = s->stream.next_out; - if (getLong(s) != s->crc || getLong(s) != s->stream.total_out) { + if (getLong(s) != s->crc) { s->z_err = Z_DATA_ERROR; } else { - /* Check for concatenated .gz files: */ + (void)getLong(s); + /* The uncompressed length returned by above getlong() may + * be different from s->stream.total_out) in case of + * concatenated .gz files. Check for such files: + */ check_header(s); if (s->z_err == Z_OK) { + uLong total_in = s->stream.total_in; + uLong total_out = s->stream.total_out; + inflateReset(&(s->stream)); + s->stream.total_in = total_in; + s->stream.total_out = total_out; s->crc = crc32(0L, Z_NULL, 0); } } @@ -357,11 +441,49 @@ int gzread (file, buf, len) return (int)(len - s->stream.avail_out); } + +/* =========================================================================== + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ +int ZEXPORT gzgetc(file) + gzFile file; +{ + unsigned char c; + + return gzread(file, &c, 1) == 1 ? c : -1; +} + + +/* =========================================================================== + Reads bytes from the compressed file until len-1 characters are + read, or a newline character is read and transferred to buf, or an + end-of-file condition is encountered. The string is then terminated + with a null character. + gzgets returns buf, or Z_NULL in case of error. + + The current implementation is not optimized at all. +*/ +char * ZEXPORT gzgets(file, buf, len) + gzFile file; + char *buf; + int len; +{ + char *b = buf; + if (buf == Z_NULL || len <= 0) return Z_NULL; + + while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ; + *buf = '\0'; + return b == buf && len > 0 ? Z_NULL : b; +} + + +#ifndef NO_DEFLATE /* =========================================================================== Writes the given number of uncompressed bytes into the compressed file. gzwrite returns the number of bytes actually written (0 in case of error). */ -int gzwrite (file, buf, len) +int ZEXPORT gzwrite (file, buf, len) gzFile file; const voidp buf; unsigned len; @@ -370,7 +492,7 @@ int gzwrite (file, buf, len) if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; - s->stream.next_in = buf; + s->stream.next_in = (Bytef*)buf; s->stream.avail_in = len; while (s->stream.avail_in != 0) { @@ -387,18 +509,95 @@ int gzwrite (file, buf, len) s->z_err = deflate(&(s->stream), Z_NO_FLUSH); if (s->z_err != Z_OK) break; } - s->crc = crc32(s->crc, buf, len); + s->crc = crc32(s->crc, (const Bytef *)buf, len); return (int)(len - s->stream.avail_in); } +/* =========================================================================== + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). +*/ +#ifdef STDC +#include + +int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...) +{ + char buf[Z_PRINTF_BUFSIZE]; + va_list va; + int len; + + va_start(va, format); +#ifdef HAS_vsnprintf + (void)vsnprintf(buf, sizeof(buf), format, va); +#else + (void)vsprintf(buf, format, va); +#endif + va_end(va); + len = strlen(buf); /* some *sprintf don't return the nb of bytes written */ + if (len <= 0) return 0; + + return gzwrite(file, buf, (unsigned)len); +} +#else /* not ANSI C */ + +int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) + gzFile file; + const char *format; + int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, + a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; +{ + char buf[Z_PRINTF_BUFSIZE]; + int len; + +#ifdef HAS_snprintf + snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +#else + sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, + a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); +#endif + len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */ + if (len <= 0) return 0; + + return gzwrite(file, buf, len); +} +#endif + +/* =========================================================================== + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ +int ZEXPORT gzputc(file, c) + gzFile file; + int c; +{ + unsigned char cc = (unsigned char) c; /* required for big endian systems */ + + return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1; +} + + +/* =========================================================================== + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ +int ZEXPORT gzputs(file, s) + gzFile file; + const char *s; +{ + return gzwrite(file, (char*)s, (unsigned)strlen(s)); +} + + /* =========================================================================== Flushes all pending output into the compressed file. The parameter flush is as in the deflate() function. - gzflush should be called only when strictly necessary because it can - degrade compression. */ -int gzflush (file, flush) +local int do_flush (file, flush) gzFile file; int flush; { @@ -424,6 +623,9 @@ int gzflush (file, flush) if (done) break; s->z_err = deflate(&(s->stream), flush); + /* Ignore the second of two consecutive flushes: */ + if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK; + /* deflate has finished flushing only when it hasn't used up * all the available space in the output buffer: */ @@ -431,9 +633,155 @@ int gzflush (file, flush) if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break; } + return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; +} + +int ZEXPORT gzflush (file, flush) + gzFile file; + int flush; +{ + gz_stream *s = (gz_stream*)file; + int err = do_flush (file, flush); + + if (err) return err; fflush(s->file); return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; } +#endif /* NO_DEFLATE */ + +/* =========================================================================== + Sets the starting position for the next gzread or gzwrite on the given + compressed file. The offset represents a number of bytes in the + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error. + SEEK_END is not implemented, returns error. + In this version of the library, gzseek can be extremely slow. +*/ +z_off_t ZEXPORT gzseek (file, offset, whence) + gzFile file; + z_off_t offset; + int whence; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || whence == SEEK_END || + s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) { + return -1L; + } + + if (s->mode == 'w') { +#ifdef NO_DEFLATE + return -1L; +#else + if (whence == SEEK_SET) { + offset -= s->stream.total_in; + } + if (offset < 0) return -1L; + + /* At this point, offset is the number of zero bytes to write. */ + if (s->inbuf == Z_NULL) { + s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */ + zmemzero(s->inbuf, Z_BUFSIZE); + } + while (offset > 0) { + uInt size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (uInt)offset; + + size = gzwrite(file, s->inbuf, size); + if (size == 0) return -1L; + + offset -= size; + } + return (z_off_t)s->stream.total_in; +#endif + } + /* Rest of function is for reading only */ + + /* compute absolute position */ + if (whence == SEEK_CUR) { + offset += s->stream.total_out; + } + if (offset < 0) return -1L; + + if (s->transparent) { + /* map to fseek */ + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; + if (fseek(s->file, offset, SEEK_SET) < 0) return -1L; + + s->stream.total_in = s->stream.total_out = (uLong)offset; + return offset; + } + + /* For a negative seek, rewind and use positive seek */ + if ((uLong)offset >= s->stream.total_out) { + offset -= s->stream.total_out; + } else if (gzrewind(file) < 0) { + return -1L; + } + /* offset is now the number of bytes to skip. */ + + if (offset != 0 && s->outbuf == Z_NULL) { + s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); + } + while (offset > 0) { + int size = Z_BUFSIZE; + if (offset < Z_BUFSIZE) size = (int)offset; + + size = gzread(file, s->outbuf, (uInt)size); + if (size <= 0) return -1L; + offset -= size; + } + return (z_off_t)s->stream.total_out; +} + +/* =========================================================================== + Rewinds input file. +*/ +int ZEXPORT gzrewind (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + if (s == NULL || s->mode != 'r') return -1; + + s->z_err = Z_OK; + s->z_eof = 0; + s->stream.avail_in = 0; + s->stream.next_in = s->inbuf; + s->crc = crc32(0L, Z_NULL, 0); + + if (s->startpos == 0) { /* not a compressed file */ + rewind(s->file); + return 0; + } + + (void) inflateReset(&s->stream); + return fseek(s->file, s->startpos, SEEK_SET); +} + +/* =========================================================================== + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. +*/ +z_off_t ZEXPORT gztell (file) + gzFile file; +{ + return gzseek(file, 0L, SEEK_CUR); +} + +/* =========================================================================== + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ +int ZEXPORT gzeof (file) + gzFile file; +{ + gz_stream *s = (gz_stream*)file; + + return (s == NULL || s->mode != 'r') ? 0 : s->z_eof; +} /* =========================================================================== Outputs a long in LSB order to the given file @@ -450,7 +798,8 @@ local void putLong (file, x) } /* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets + Reads a long in LSB order from the given gz_stream. Sets z_err in case + of error. */ local uLong getLong (s) gz_stream *s; @@ -470,7 +819,7 @@ local uLong getLong (s) Flushes all pending output if necessary, closes the compressed file and deallocates all the (de)compression state. */ -int gzclose (file) +int ZEXPORT gzclose (file) gzFile file; { int err; @@ -479,14 +828,17 @@ int gzclose (file) if (s == NULL) return Z_STREAM_ERROR; if (s->mode == 'w') { - err = gzflush (file, Z_FINISH); - if (err != Z_OK) return destroy(file); +#ifdef NO_DEFLATE + return Z_STREAM_ERROR; +#else + err = do_flush (file, Z_FINISH); + if (err != Z_OK) return destroy((gz_stream*)file); putLong (s->file, s->crc); putLong (s->file, s->stream.total_in); - +#endif } - return destroy(file); + return destroy((gz_stream*)file); } /* =========================================================================== @@ -496,7 +848,7 @@ int gzclose (file) errnum is set to Z_ERRNO and the application may consult errno to get the exact error code. */ -const char* gzerror (file, errnum) +const char* ZEXPORT gzerror (file, errnum) gzFile file; int *errnum; { diff --git a/zlib/infblock.c b/zlib/infblock.c index cc2e6745a..f4920faa5 100644 --- a/zlib/infblock.c +++ b/zlib/infblock.c @@ -1,5 +1,5 @@ /* infblock.c -- interpret and process block types to last block - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -11,8 +11,12 @@ struct inflate_codes_state {int dummy;}; /* for buggy compilers */ +/* simplify the use of the inflate_huft type with some defines */ +#define exop word.what.Exop +#define bits word.what.Bits + /* Table for deflate from PKZIP's appnote.txt. */ -local uInt border[] = { /* Order of the bit length code lengths */ +local const uInt border[] = { /* Order of the bit length code lengths */ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; /* @@ -66,23 +70,19 @@ inflate_blocks_statef *s; z_streamp z; uLongf *c; { - if (s->checkfn != Z_NULL) + if (c != Z_NULL) *c = s->check; if (s->mode == BTREE || s->mode == DTREE) ZFREE(z, s->sub.trees.blens); if (s->mode == CODES) - { inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); - } s->mode = TYPE; s->bitk = 0; s->bitb = 0; s->read = s->write = s->window; if (s->checkfn != Z_NULL) - z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0); - Trace((stderr, "inflate: blocks reset\n")); + z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0); + Tracev((stderr, "inflate: blocks reset\n")); } @@ -96,23 +96,27 @@ uInt w; if ((s = (inflate_blocks_statef *)ZALLOC (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL) return s; + if ((s->hufts = + (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL) + { + ZFREE(z, s); + return Z_NULL; + } if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL) { + ZFREE(z, s->hufts); ZFREE(z, s); return Z_NULL; } s->end = s->window + w; s->checkfn = c; s->mode = TYPE; - Trace((stderr, "inflate: blocks allocated\n")); - inflate_blocks_reset(s, z, &s->check); + Tracev((stderr, "inflate: blocks allocated\n")); + inflate_blocks_reset(s, z, Z_NULL); return s; } -#ifdef DEBUG - extern uInt inflate_hufts; -#endif int inflate_blocks(s, z, r) inflate_blocks_statef *s; z_streamp z; @@ -139,7 +143,7 @@ int r; switch (t >> 1) { case 0: /* stored */ - Trace((stderr, "inflate: stored block%s\n", + Tracev((stderr, "inflate: stored block%s\n", s->last ? " (last)" : "")); DUMPBITS(3) t = k & 7; /* go to byte boundary */ @@ -147,27 +151,25 @@ int r; s->mode = LENS; /* get length of stored block */ break; case 1: /* fixed */ - Trace((stderr, "inflate: fixed codes block%s\n", + Tracev((stderr, "inflate: fixed codes block%s\n", s->last ? " (last)" : "")); { uInt bl, bd; inflate_huft *tl, *td; - inflate_trees_fixed(&bl, &bd, &tl, &td); + inflate_trees_fixed(&bl, &bd, &tl, &td, z); s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z); if (s->sub.decode.codes == Z_NULL) { r = Z_MEM_ERROR; LEAVE } - s->sub.decode.tl = Z_NULL; /* don't try to free these */ - s->sub.decode.td = Z_NULL; } DUMPBITS(3) s->mode = CODES; break; case 2: /* dynamic */ - Trace((stderr, "inflate: dynamic codes block%s\n", + Tracev((stderr, "inflate: dynamic codes block%s\n", s->last ? " (last)" : "")); DUMPBITS(3) s->mode = TABLE; @@ -224,8 +226,6 @@ int r; } #endif t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f); - if (t < 19) - t = 19; if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL) { r = Z_MEM_ERROR; @@ -246,9 +246,10 @@ int r; s->sub.trees.blens[border[s->sub.trees.index++]] = 0; s->sub.trees.bb = 7; t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb, - &s->sub.trees.tb, z); + &s->sub.trees.tb, s->hufts, z); if (t != Z_OK) { + ZFREE(z, s->sub.trees.blens); r = t; if (r == Z_DATA_ERROR) s->mode = BAD; @@ -267,8 +268,8 @@ int r; t = s->sub.trees.bb; NEEDBITS(t) h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]); - t = h->word.what.Bits; - c = h->more.Base; + t = h->bits; + c = h->base; if (c < 16) { DUMPBITS(t) @@ -287,6 +288,7 @@ int r; if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) || (c == 16 && i < 1)) { + ZFREE(z, s->sub.trees.blens); s->mode = BAD; z->msg = (char*)"invalid bit length repeat"; r = Z_DATA_ERROR; @@ -299,7 +301,6 @@ int r; s->sub.trees.index = i; } } - inflate_trees_free(s->sub.trees.tb, z); s->sub.trees.tb = Z_NULL; { uInt bl, bd; @@ -309,11 +310,10 @@ int r; bl = 9; /* must be <= 9 for lookahead assumptions */ bd = 6; /* must be <= 9 for lookahead assumptions */ t = s->sub.trees.table; -#ifdef DEBUG - inflate_hufts = 0; -#endif t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f), - s->sub.trees.blens, &bl, &bd, &tl, &td, z); + s->sub.trees.blens, &bl, &bd, &tl, &td, + s->hufts, z); + ZFREE(z, s->sub.trees.blens); if (t != Z_OK) { if (t == (uInt)Z_DATA_ERROR) @@ -321,19 +321,13 @@ int r; r = t; LEAVE } - Tracev((stderr, "inflate: trees ok, %d * %d bytes used\n", - inflate_hufts, sizeof(inflate_huft))); + Tracev((stderr, "inflate: trees ok\n")); if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL) { - inflate_trees_free(td, z); - inflate_trees_free(tl, z); r = Z_MEM_ERROR; LEAVE } - ZFREE(z, s->sub.trees.blens); s->sub.decode.codes = c; - s->sub.decode.tl = tl; - s->sub.decode.td = td; } s->mode = CODES; case CODES: @@ -342,8 +336,6 @@ int r; return inflate_flush(s, z, r); r = Z_OK; inflate_codes_free(s->sub.decode.codes, z); - inflate_trees_free(s->sub.decode.td, z); - inflate_trees_free(s->sub.decode.tl, z); LOAD Tracev((stderr, "inflate: codes end, %lu total out\n", z->total_out + (q >= s->read ? q - s->read : @@ -353,13 +345,6 @@ int r; s->mode = TYPE; break; } - if (k > 7) /* return unused byte, if any */ - { - Assert(k < 16, "inflate_codes grabbed too many bytes") - k -= 8; - n++; - p--; /* can always return one */ - } s->mode = DRY; case DRY: FLUSH @@ -379,15 +364,15 @@ int r; } -int inflate_blocks_free(s, z, c) +int inflate_blocks_free(s, z) inflate_blocks_statef *s; z_streamp z; -uLongf *c; { - inflate_blocks_reset(s, z, c); + inflate_blocks_reset(s, z, Z_NULL); ZFREE(z, s->window); + ZFREE(z, s->hufts); ZFREE(z, s); - Trace((stderr, "inflate: blocks freed\n")); + Tracev((stderr, "inflate: blocks freed\n")); return Z_OK; } @@ -397,6 +382,17 @@ inflate_blocks_statef *s; const Bytef *d; uInt n; { - zmemcpy((charf *)s->window, d, n); + zmemcpy(s->window, d, n); s->read = s->write = s->window + n; } + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. + * IN assertion: s != Z_NULL + */ +int inflate_blocks_sync_point(s) +inflate_blocks_statef *s; +{ + return s->mode == LENS; +} diff --git a/zlib/infblock.h b/zlib/infblock.h index 3ecd50cd3..bd25c8075 100644 --- a/zlib/infblock.h +++ b/zlib/infblock.h @@ -1,5 +1,5 @@ /* infblock.h -- header to use infblock.c - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -28,10 +28,12 @@ extern void inflate_blocks_reset OF(( extern int inflate_blocks_free OF(( inflate_blocks_statef *, - z_streamp , - uLongf *)); /* check value on output */ + z_streamp)); extern void inflate_set_dictionary OF(( inflate_blocks_statef *s, const Bytef *d, /* dictionary */ uInt n)); /* dictionary length */ + +extern int inflate_blocks_sync_point OF(( + inflate_blocks_statef *s)); diff --git a/zlib/infcodes.c b/zlib/infcodes.c index 3ae3818a1..d4e5ee9a5 100644 --- a/zlib/infcodes.c +++ b/zlib/infcodes.c @@ -1,5 +1,5 @@ /* infcodes.c -- process literals and length/distance pairs - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -11,16 +11,10 @@ #include "inffast.h" /* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next #define exop word.what.Exop #define bits word.what.Bits -/* inflate codes private state */ -struct inflate_codes_state { - - /* mode */ - enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ +typedef enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */ START, /* x: set up for LEN */ LEN, /* i: get length/literal/eob next */ LENEXT, /* i: getting length extra (have base) */ @@ -31,7 +25,13 @@ struct inflate_codes_state { WASH, /* o: got eob, possibly still output waiting */ END, /* x: got eob and all data flushed */ BADCODE} /* x: got error */ - mode; /* current inflate_codes mode */ +inflate_codes_mode; + +/* inflate codes private state */ +struct inflate_codes_state { + + /* mode */ + inflate_codes_mode mode; /* current inflate_codes mode */ /* mode dependent information */ uInt len; @@ -143,7 +143,7 @@ int r; if ((e & 64) == 0) /* next table */ { c->sub.code.need = e; - c->sub.code.tree = t->next; + c->sub.code.tree = t + t->base; break; } if (e & 32) /* end of block */ @@ -181,7 +181,7 @@ int r; if ((e & 64) == 0) /* next table */ { c->sub.code.need = e; - c->sub.code.tree = t->next; + c->sub.code.tree = t + t->base; break; } c->mode = BADCODE; /* invalid code */ @@ -221,6 +221,13 @@ int r; c->mode = START; break; case WASH: /* o: got eob, possibly more output */ + if (k > 7) /* return unused byte, if any */ + { + Assert(k < 16, "inflate_codes grabbed too many bytes") + k -= 8; + n++; + p--; /* can always return one */ + } FLUSH if (s->read != s->write) LEAVE @@ -235,6 +242,9 @@ int r; r = Z_STREAM_ERROR; LEAVE } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif } diff --git a/zlib/infcodes.h b/zlib/infcodes.h index c2c38df2c..6c750d896 100644 --- a/zlib/infcodes.h +++ b/zlib/infcodes.h @@ -1,5 +1,5 @@ /* infcodes.h -- header to use infcodes.c - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ diff --git a/zlib/inffast.c b/zlib/inffast.c index 86eee4a29..61a78ee93 100644 --- a/zlib/inffast.c +++ b/zlib/inffast.c @@ -1,5 +1,5 @@ /* inffast.c -- process literals and length/distance pairs fast - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -13,14 +13,12 @@ struct inflate_codes_state {int dummy;}; /* for buggy compilers */ /* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next #define exop word.what.Exop #define bits word.what.Bits /* macros for bit input with no checking and for returning unused bytes */ #define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<>3);p-=c;k&=7;} +#define UNGRAB {c=z->avail_in-n;c=(k>>3)>3:c;n+=c;p-=c;k-=c<<3;} /* Called with number of bytes left to write in window at least 258 (the maximum string length) and number of input bytes available @@ -120,7 +118,10 @@ z_streamp z; break; } else if ((e & 64) == 0) - e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop; + { + t += t->base; + e = (t += ((uInt)b & inflate_mask[e]))->exop; + } else { z->msg = (char*)"invalid distance code"; @@ -133,7 +134,8 @@ z_streamp z; } if ((e & 64) == 0) { - if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0) + t += t->base; + if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0) { DUMPBITS(t->bits) Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ? diff --git a/zlib/inffast.h b/zlib/inffast.h index 8cc644efb..8facec553 100644 --- a/zlib/inffast.h +++ b/zlib/inffast.h @@ -1,5 +1,5 @@ /* inffast.h -- header to use inffast.c - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ diff --git a/zlib/inflate.c b/zlib/inflate.c index 74cc69c86..32e9b8de6 100644 --- a/zlib/inflate.c +++ b/zlib/inflate.c @@ -1,5 +1,5 @@ /* inflate.c -- zlib interface to inflate modules - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -8,11 +8,7 @@ struct inflate_blocks_state {int dummy;}; /* for buggy compilers */ -/* inflate private state */ -struct internal_state { - - /* mode */ - enum { +typedef enum { METHOD, /* waiting for method byte */ FLAG, /* waiting for flag byte */ DICT4, /* four dictionary check bytes to go */ @@ -27,7 +23,13 @@ struct internal_state { CHECK1, /* one check byte to go */ DONE, /* finished check, done */ BAD} /* got an error--stay here */ - mode; /* current inflate mode */ +inflate_mode; + +/* inflate private state */ +struct internal_state { + + /* mode */ + inflate_mode mode; /* current inflate mode */ /* mode dependent information */ union { @@ -48,39 +50,35 @@ struct internal_state { }; -int inflateReset(z) +int ZEXPORT inflateReset(z) z_streamp z; { - uLong c; - if (z == Z_NULL || z->state == Z_NULL) return Z_STREAM_ERROR; z->total_in = z->total_out = 0; z->msg = Z_NULL; z->state->mode = z->state->nowrap ? BLOCKS : METHOD; - inflate_blocks_reset(z->state->blocks, z, &c); - Trace((stderr, "inflate: reset\n")); + inflate_blocks_reset(z->state->blocks, z, Z_NULL); + Tracev((stderr, "inflate: reset\n")); return Z_OK; } -int inflateEnd(z) +int ZEXPORT inflateEnd(z) z_streamp z; { - uLong c; - if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL) return Z_STREAM_ERROR; if (z->state->blocks != Z_NULL) - inflate_blocks_free(z->state->blocks, z, &c); + inflate_blocks_free(z->state->blocks, z); ZFREE(z, z->state); z->state = Z_NULL; - Trace((stderr, "inflate: end\n")); + Tracev((stderr, "inflate: end\n")); return Z_OK; } -int inflateInit2_(z, w, version, stream_size) +int ZEXPORT inflateInit2_(z, w, version, stream_size) z_streamp z; int w; const char *version; @@ -129,7 +127,7 @@ int stream_size; inflateEnd(z); return Z_MEM_ERROR; } - Trace((stderr, "inflate: allocated\n")); + Tracev((stderr, "inflate: allocated\n")); /* reset state */ inflateReset(z); @@ -137,7 +135,7 @@ int stream_size; } -int inflateInit_(z, version, stream_size) +int ZEXPORT inflateInit_(z, version, stream_size) z_streamp z; const char *version; int stream_size; @@ -146,18 +144,19 @@ int stream_size; } -#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;} +#define NEEDBYTE {if(z->avail_in==0)return r;r=f;} #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++) -int inflate(z, f) +int ZEXPORT inflate(z, f) z_streamp z; int f; { int r; uInt b; - if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0) + if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL) return Z_STREAM_ERROR; + f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; r = Z_BUF_ERROR; while (1) switch (z->state->mode) { @@ -188,11 +187,11 @@ int f; z->state->sub.marker = 5; /* can't try inflateSync */ break; } - Trace((stderr, "inflate: zlib header ok\n")); + Tracev((stderr, "inflate: zlib header ok\n")); if (!(b & PRESET_DICT)) { z->state->mode = BLOCKS; - break; + break; } z->state->mode = DICT4; case DICT4: @@ -226,9 +225,11 @@ int f; z->state->sub.marker = 0; /* can try inflateSync */ break; } + if (r == Z_OK) + r = f; if (r != Z_STREAM_END) return r; - r = Z_OK; + r = f; inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was); if (z->state->nowrap) { @@ -259,7 +260,7 @@ int f; z->state->sub.marker = 5; /* can't try inflateSync */ break; } - Trace((stderr, "inflate: zlib check ok\n")); + Tracev((stderr, "inflate: zlib check ok\n")); z->state->mode = DONE; case DONE: return Z_STREAM_END; @@ -268,10 +269,13 @@ int f; default: return Z_STREAM_ERROR; } +#ifdef NEED_DUMMY_RETURN + return Z_STREAM_ERROR; /* Some dumb compilers complain without this */ +#endif } -int inflateSetDictionary(z, dictionary, dictLength) +int ZEXPORT inflateSetDictionary(z, dictionary, dictLength) z_streamp z; const Bytef *dictionary; uInt dictLength; @@ -295,7 +299,7 @@ uInt dictLength; } -int inflateSync(z) +int ZEXPORT inflateSync(z) z_streamp z; { uInt n; /* number of bytes to look at */ @@ -319,7 +323,8 @@ z_streamp z; /* search */ while (n && m < 4) { - if (*p == (Byte)(m < 2 ? 0 : 0xff)) + static const Byte mark[4] = {0, 0, 0xff, 0xff}; + if (*p == mark[m]) m++; else if (*p) m = 0; @@ -343,3 +348,19 @@ z_streamp z; z->state->mode = BLOCKS; return Z_OK; } + + +/* Returns true if inflate is currently at the end of a block generated + * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP + * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH + * but removes the length bytes of the resulting empty stored block. When + * decompressing, PPP checks that at the end of input packet, inflate is + * waiting for these length bytes. + */ +int ZEXPORT inflateSyncPoint(z) +z_streamp z; +{ + if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL) + return Z_STREAM_ERROR; + return inflate_blocks_sync_point(z->state->blocks); +} diff --git a/zlib/inftrees.c b/zlib/inftrees.c index 90205bd1e..ef1e0b6b8 100644 --- a/zlib/inftrees.c +++ b/zlib/inftrees.c @@ -1,12 +1,17 @@ /* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ #include "zutil.h" #include "inftrees.h" -char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler "; +#if !defined(BUILDFIXED) && !defined(STDC) +# define BUILDFIXED /* non ANSI compilers may not accept inffixed.h */ +#endif + +const char inflate_copyright[] = + " inflate 1.1.3 Copyright 1995-1998 Mark Adler "; /* If you use the zlib library in a product, an acknowledgment is welcome in the documentation of your product. If for some reason you cannot @@ -16,8 +21,6 @@ char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler "; struct internal_state {int dummy;}; /* for buggy compilers */ /* simplify the use of the inflate_huft type with some defines */ -#define base more.Base -#define next more.Next #define exop word.what.Exop #define bits word.what.Bits @@ -26,30 +29,27 @@ local int huft_build OF(( uIntf *, /* code lengths in bits */ uInt, /* number of codes */ uInt, /* number of "simple" codes */ - uIntf *, /* list of base values for non-simple codes */ - uIntf *, /* list of extra bits for non-simple codes */ + const uIntf *, /* list of base values for non-simple codes */ + const uIntf *, /* list of extra bits for non-simple codes */ inflate_huft * FAR*,/* result: starting table */ uIntf *, /* maximum lookup bits (returns actual) */ - z_streamp )); /* for zalloc function */ - -local voidpf falloc OF(( - voidpf, /* opaque pointer (not used) */ - uInt, /* number of items */ - uInt)); /* size of item */ + inflate_huft *, /* space for trees */ + uInt *, /* hufts used in space */ + uIntf * )); /* space for values */ /* Tables for deflate from PKZIP's appnote.txt. */ -local uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ +local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */ 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - /* actually lengths - 2; also see note #13 above about 258 */ -local uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ + /* see note #13 above about 258 */ +local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */ 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, - 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */ -local uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ + 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */ +local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */ 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, 8193, 12289, 16385, 24577}; -local uInt cpdext[30] = { /* Extra bits for distance codes */ +local const uInt cpdext[30] = { /* Extra bits for distance codes */ 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 13, 13}; @@ -89,26 +89,23 @@ local uInt cpdext[30] = { /* Extra bits for distance codes */ /* If BMAX needs to be larger than 16, then h and x[] should be uLong. */ #define BMAX 15 /* maximum bit length of any code */ -#define N_MAX 288 /* maximum number of codes in any set */ -#ifdef DEBUG - uInt inflate_hufts; -#endif - -local int huft_build(b, n, s, d, e, t, m, zs) +local int huft_build(b, n, s, d, e, t, m, hp, hn, v) uIntf *b; /* code lengths in bits (all assumed <= BMAX) */ -uInt n; /* number of codes (assumed <= N_MAX) */ +uInt n; /* number of codes (assumed <= 288) */ uInt s; /* number of simple-valued codes (0..s-1) */ -uIntf *d; /* list of base values for non-simple codes */ -uIntf *e; /* list of extra bits for non-simple codes */ +const uIntf *d; /* list of base values for non-simple codes */ +const uIntf *e; /* list of extra bits for non-simple codes */ inflate_huft * FAR *t; /* result: starting table */ uIntf *m; /* maximum lookup bits, returns actual */ -z_streamp zs; /* for zalloc function */ +inflate_huft *hp; /* space for trees */ +uInt *hn; /* hufts used in space */ +uIntf *v; /* working area: values in order of bit length */ /* Given a list of code lengths and a maximum table size, make a set of tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR if the given code set is incomplete (the tables are still built in this - case), Z_DATA_ERROR if the input is invalid (all zero length codes or an - over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */ + case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of + lengths), or Z_MEM_ERROR if not enough memory. */ { uInt a; /* counter for codes of length k */ @@ -120,11 +117,11 @@ z_streamp zs; /* for zalloc function */ register uInt j; /* counter */ register int k; /* number of bits in current code */ int l; /* bits per table (returned in m) */ + uInt mask; /* (1 << w) - 1, to avoid cc -O bug on HP */ register uIntf *p; /* pointer into c[], b[], or v[] */ inflate_huft *q; /* points to current table */ struct inflate_huft_s r; /* table entry for structure assignment */ inflate_huft *u[BMAX]; /* table stack */ - uInt v[N_MAX]; /* values in order of bit length */ register int w; /* bits before this table == (l * h) */ uInt x[BMAX+1]; /* bit offsets, then code stack */ uIntf *xp; /* pointer into x */ @@ -190,6 +187,7 @@ z_streamp zs; /* for zalloc function */ if ((j = *p++) != 0) v[x[j]++] = i; } while (++i < n); + n = x[g]; /* set n to length of v */ /* Generate the Huffman codes and for each, make the table entries */ @@ -231,20 +229,11 @@ z_streamp zs; /* for zalloc function */ } z = 1 << j; /* table entries for j-bit table */ - /* allocate and link in new table */ - if ((q = (inflate_huft *)ZALLOC - (zs,z + 1,sizeof(inflate_huft))) == Z_NULL) - { - if (h) - inflate_trees_free(u[0], zs); + /* allocate new table */ + if (*hn + z > MANY) /* (note: doesn't matter for fixed) */ return Z_MEM_ERROR; /* not enough memory */ - } -#ifdef DEBUG - inflate_hufts += z + 1; -#endif - *t = q + 1; /* link to list for huft_free() */ - *(t = &(q->next)) = Z_NULL; - u[h] = ++q; /* table starts after link */ + u[h] = q = hp + *hn; + *hn += z; /* connect to last table, if there is one */ if (h) @@ -252,10 +241,12 @@ z_streamp zs; /* for zalloc function */ x[h] = i; /* save pattern for backing up */ r.bits = (Byte)l; /* bits to dump before this table */ r.exop = (Byte)j; /* bits in this table */ - r.next = q; /* pointer to this table */ - j = i >> (w - l); /* (get around Turbo C bug) */ + j = i >> (w - l); + r.base = (uInt)(q - u[h-1] - j); /* offset to this table */ u[h-1][j] = r; /* connect to last table */ } + else + *t = q; /* first table is returned result */ } /* set up table entry in r */ @@ -284,10 +275,12 @@ z_streamp zs; /* for zalloc function */ i ^= j; /* backup over finished tables */ - while ((i & ((1 << w) - 1)) != x[h]) + mask = (1 << w) - 1; /* needed on HP, cc -O bug */ + while ((i & mask) != x[h]) { h--; /* don't need to update q */ w -= l; + mask = (1 << w) - 1; } } } @@ -298,28 +291,34 @@ z_streamp zs; /* for zalloc function */ } -int inflate_trees_bits(c, bb, tb, z) +int inflate_trees_bits(c, bb, tb, hp, z) uIntf *c; /* 19 code lengths */ uIntf *bb; /* bits tree desired/actual depth */ inflate_huft * FAR *tb; /* bits tree result */ -z_streamp z; /* for zfree function */ +inflate_huft *hp; /* space for trees */ +z_streamp z; /* for messages */ { int r; + uInt hn = 0; /* hufts used in space */ + uIntf *v; /* work area for huft_build */ - r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z); + if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, + tb, bb, hp, &hn, v); if (r == Z_DATA_ERROR) z->msg = (char*)"oversubscribed dynamic bit lengths tree"; - else if (r == Z_BUF_ERROR) + else if (r == Z_BUF_ERROR || *bb == 0) { - inflate_trees_free(*tb, z); z->msg = (char*)"incomplete dynamic bit lengths tree"; r = Z_DATA_ERROR; } + ZFREE(z, v); return r; } -int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z) +int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z) uInt nl; /* number of literal/length codes */ uInt nd; /* number of distance codes */ uIntf *c; /* that many (total) code lengths */ @@ -327,88 +326,100 @@ uIntf *bl; /* literal desired/actual bit depth */ uIntf *bd; /* distance desired/actual bit depth */ inflate_huft * FAR *tl; /* literal/length tree result */ inflate_huft * FAR *td; /* distance tree result */ -z_streamp z; /* for zfree function */ +inflate_huft *hp; /* space for trees */ +z_streamp z; /* for messages */ { int r; + uInt hn = 0; /* hufts used in space */ + uIntf *v; /* work area for huft_build */ + + /* allocate work area */ + if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; /* build literal/length tree */ - if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK) + r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v); + if (r != Z_OK || *bl == 0) { if (r == Z_DATA_ERROR) z->msg = (char*)"oversubscribed literal/length tree"; - else if (r == Z_BUF_ERROR) + else if (r != Z_MEM_ERROR) { - inflate_trees_free(*tl, z); z->msg = (char*)"incomplete literal/length tree"; r = Z_DATA_ERROR; } + ZFREE(z, v); return r; } /* build distance tree */ - if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK) + r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v); + if (r != Z_OK || (*bd == 0 && nl > 257)) { if (r == Z_DATA_ERROR) - z->msg = (char*)"oversubscribed literal/length tree"; + z->msg = (char*)"oversubscribed distance tree"; else if (r == Z_BUF_ERROR) { #ifdef PKZIP_BUG_WORKAROUND r = Z_OK; } #else - inflate_trees_free(*td, z); - z->msg = (char*)"incomplete literal/length tree"; + z->msg = (char*)"incomplete distance tree"; r = Z_DATA_ERROR; } - inflate_trees_free(*tl, z); + else if (r != Z_MEM_ERROR) + { + z->msg = (char*)"empty distance tree with lengths"; + r = Z_DATA_ERROR; + } + ZFREE(z, v); return r; #endif } /* done */ + ZFREE(z, v); return Z_OK; } /* build fixed tables only once--keep them here */ +#ifdef BUILDFIXED local int fixed_built = 0; -#define FIXEDH 530 /* number of hufts used by fixed tables */ +#define FIXEDH 544 /* number of hufts used by fixed tables */ local inflate_huft fixed_mem[FIXEDH]; local uInt fixed_bl; local uInt fixed_bd; local inflate_huft *fixed_tl; local inflate_huft *fixed_td; +#else +#include "inffixed.h" +#endif -local voidpf falloc(q, n, s) -voidpf q; /* opaque pointer */ -uInt n; /* number of items */ -uInt s; /* size of item */ -{ - Assert(s == sizeof(inflate_huft) && n <= *(intf *)q, - "inflate_trees falloc overflow"); - *(intf *)q -= n+s-s; /* s-s to avoid warning */ - return (voidpf)(fixed_mem + *(intf *)q); -} - - -int inflate_trees_fixed(bl, bd, tl, td) +int inflate_trees_fixed(bl, bd, tl, td, z) uIntf *bl; /* literal desired/actual bit depth */ uIntf *bd; /* distance desired/actual bit depth */ inflate_huft * FAR *tl; /* literal/length tree result */ inflate_huft * FAR *td; /* distance tree result */ +z_streamp z; /* for memory allocation */ { - /* build fixed tables if not already (multiple overlapped executions ok) */ +#ifdef BUILDFIXED + /* build fixed tables if not already */ if (!fixed_built) { int k; /* temporary variable */ - unsigned c[288]; /* length list for huft_build */ - z_stream z; /* for falloc function */ - int f = FIXEDH; /* number of hufts left in fixed_mem */ + uInt f = 0; /* number of hufts used in fixed_mem */ + uIntf *c; /* length list for huft_build */ + uIntf *v; /* work area for huft_build */ - /* set up fake z_stream for memory routines */ - z.zalloc = falloc; - z.zfree = Z_NULL; - z.opaque = (voidpf)&f; + /* allocate memory */ + if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + return Z_MEM_ERROR; + if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL) + { + ZFREE(z, c); + return Z_MEM_ERROR; + } /* literal table */ for (k = 0; k < 144; k++) @@ -419,52 +430,26 @@ inflate_huft * FAR *td; /* distance tree result */ c[k] = 7; for (; k < 288; k++) c[k] = 8; - fixed_bl = 7; - huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z); + fixed_bl = 9; + huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, + fixed_mem, &f, v); /* distance table */ for (k = 0; k < 30; k++) c[k] = 5; fixed_bd = 5; - huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z); + huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, + fixed_mem, &f, v); /* done */ - Assert(f == 0, "invalid build of fixed tables"); + ZFREE(z, v); + ZFREE(z, c); fixed_built = 1; } +#endif *bl = fixed_bl; *bd = fixed_bd; *tl = fixed_tl; *td = fixed_td; return Z_OK; } - - -int inflate_trees_free(t, z) -inflate_huft *t; /* table to free */ -z_streamp z; /* for zfree function */ -/* Free the malloc'ed tables built by huft_build(), which makes a linked - list of the tables it made, with the links in a dummy first entry of - each table. */ -{ - register inflate_huft *p, *q, *r; - - /* Reverse linked list */ - p = Z_NULL; - q = t; - while (q != Z_NULL) - { - r = (q - 1)->next; - (q - 1)->next = p; - p = q; - q = r; - } - /* Go through linked list, freeing from the malloced (t[-1]) address. */ - while (p != Z_NULL) - { - q = (--p)->next; - ZFREE(z,p); - p = q; - } - return Z_OK; -} diff --git a/zlib/inftrees.h b/zlib/inftrees.h index b06613ddd..85853e097 100644 --- a/zlib/inftrees.h +++ b/zlib/inftrees.h @@ -1,5 +1,5 @@ /* inftrees.h -- header to use inftrees.c - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -19,23 +19,25 @@ struct inflate_huft_s { Byte Exop; /* number of extra bits or operation */ Byte Bits; /* number of bits in this code or subcode */ } what; - Bytef *pad; /* pad structure to a power of 2 (4 bytes for */ - } word; /* 16-bit, 8 bytes for 32-bit machines) */ - union { - uInt Base; /* literal, length base, or distance base */ - inflate_huft *Next; /* pointer to next level of table */ - } more; + uInt pad; /* pad structure to a power of 2 (4 bytes for */ + } word; /* 16-bit, 8 bytes for 32-bit int's) */ + uInt base; /* literal, length base, distance base, + or table offset */ }; -#ifdef DEBUG - extern uInt inflate_hufts; -#endif +/* Maximum size of dynamic tree. The maximum found in a long but non- + exhaustive search was 1004 huft structures (850 for length/literals + and 154 for distances, the latter actually the result of an + exhaustive search). The actual maximum is not known, but the + value below is more than safe. */ +#define MANY 1440 extern int inflate_trees_bits OF(( uIntf *, /* 19 code lengths */ uIntf *, /* bits tree desired/actual depth */ inflate_huft * FAR *, /* bits tree result */ - z_streamp )); /* for zalloc, zfree functions */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ extern int inflate_trees_dynamic OF(( uInt, /* number of literal/length codes */ @@ -45,15 +47,12 @@ extern int inflate_trees_dynamic OF(( uIntf *, /* distance desired/actual bit depth */ inflate_huft * FAR *, /* literal/length tree result */ inflate_huft * FAR *, /* distance tree result */ - z_streamp )); /* for zalloc, zfree functions */ + inflate_huft *, /* space for trees */ + z_streamp)); /* for messages */ extern int inflate_trees_fixed OF(( uIntf *, /* literal desired/actual bit depth */ uIntf *, /* distance desired/actual bit depth */ inflate_huft * FAR *, /* literal/length tree result */ - inflate_huft * FAR *)); /* distance tree result */ - -extern int inflate_trees_free OF(( - inflate_huft *, /* tables to free */ - z_streamp )); /* for zfree function */ - + inflate_huft * FAR *, /* distance tree result */ + z_streamp)); /* for memory allocation */ diff --git a/zlib/infutil.c b/zlib/infutil.c index eb21199c3..824dab571 100644 --- a/zlib/infutil.c +++ b/zlib/infutil.c @@ -1,5 +1,5 @@ /* inflate_util.c -- data and routines common to blocks and codes - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ diff --git a/zlib/infutil.h b/zlib/infutil.h index 702cd290c..99d1135d0 100644 --- a/zlib/infutil.h +++ b/zlib/infutil.h @@ -1,5 +1,5 @@ /* infutil.h -- types and macros common to blocks and codes - * Copyright (C) 1995-1996 Mark Adler + * Copyright (C) 1995-1998 Mark Adler * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -41,8 +41,6 @@ struct inflate_blocks_state { inflate_huft *tb; /* bit length decoding tree */ } trees; /* if DTREE, decoding info for trees */ struct { - inflate_huft *tl; - inflate_huft *td; /* trees to free */ inflate_codes_statef *codes; } decode; /* if CODES, current state */ @@ -52,6 +50,7 @@ struct inflate_blocks_state { /* mode independent information */ uInt bitk; /* bits in bit buffer */ uLong bitb; /* bit buffer */ + inflate_huft *hufts; /* single malloc for tree space */ Bytef *window; /* sliding window */ Bytef *end; /* one byte after sliding window */ Bytef *read; /* window read pointer */ diff --git a/zlib/trees.c b/zlib/trees.c index 410998d2b..f01fb30d8 100644 --- a/zlib/trees.c +++ b/zlib/trees.c @@ -1,5 +1,5 @@ /* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-1996 Jean-loup Gailly + * Copyright (C) 1995-1998 Jean-loup Gailly * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -29,7 +29,9 @@ * Addison-Wesley, 1983. ISBN 0-201-06672-6. */ -/* $Id$ */ +/* @(#) $Id$ */ + +/* #define GEN_TREES_H */ #include "deflate.h" @@ -56,16 +58,16 @@ #define REPZ_11_138 18 /* repeat a zero length 11-138 times (7 bits of repeat count) */ -local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ +local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; -local int extra_dbits[D_CODES] /* extra bits for each distance code */ +local const int extra_dbits[D_CODES] /* extra bits for each distance code */ = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; -local int extra_blbits[BL_CODES]/* extra bits for each bit length code */ +local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; -local uch bl_order[BL_CODES] +local const uch bl_order[BL_CODES] = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; /* The lengths of the bit length codes are sent in order of decreasing * probability, to avoid transmitting the lengths for unused bit length codes. @@ -80,6 +82,11 @@ local uch bl_order[BL_CODES] * Local data. These are initialized only once. */ +#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ + +#if defined(GEN_TREES_H) || !defined(STDC) +/* non ANSI compilers may not accept trees.h */ + local ct_data static_ltree[L_CODES+2]; /* The static literal tree. Since the bit lengths are imposed, there is no * need for the L_CODES extra codes used during heap construction. However @@ -92,13 +99,13 @@ local ct_data static_dtree[D_CODES]; * 5 bits.) */ -local uch dist_code[512]; -/* distance codes. The first 256 values correspond to the distances +uch _dist_code[DIST_CODE_LEN]; +/* Distance codes. The first 256 values correspond to the distances * 3 .. 258, the last 256 values correspond to the top 8 bits of * the 15 bit distances. */ -local uch length_code[MAX_MATCH-MIN_MATCH+1]; +uch _length_code[MAX_MATCH-MIN_MATCH+1]; /* length code for each normalized match length (0 == MIN_MATCH) */ local int base_length[LENGTH_CODES]; @@ -107,9 +114,13 @@ local int base_length[LENGTH_CODES]; local int base_dist[D_CODES]; /* First normalized distance for each code (0 = distance of 1) */ +#else +# include "trees.h" +#endif /* GEN_TREES_H */ + struct static_tree_desc_s { - ct_data *static_tree; /* static tree or NULL */ - intf *extra_bits; /* extra bits for each code or NULL */ + const ct_data *static_tree; /* static tree or NULL */ + const intf *extra_bits; /* extra bits for each code or NULL */ int extra_base; /* base index for extra_bits */ int elems; /* max number of elements in the tree */ int max_length; /* max bit length for the codes */ @@ -122,7 +133,7 @@ local static_tree_desc static_d_desc = {static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; local static_tree_desc static_bl_desc = -{(ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; +{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; /* =========================================================================== * Local (static) routines in this file. @@ -148,23 +159,20 @@ local void bi_flush OF((deflate_state *s)); local void copy_block OF((deflate_state *s, charf *buf, unsigned len, int header)); +#ifdef GEN_TREES_H +local void gen_trees_header OF((void)); +#endif + #ifndef DEBUG # define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) /* Send a code of the given tree. c and tree must not have side effects */ #else /* DEBUG */ # define send_code(s, c, tree) \ - { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ + { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ send_bits(s, tree[c].Code, tree[c].Len); } #endif -#define d_code(dist) \ - ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)]) -/* Mapping from a distance to a distance code. dist is the distance - 1 and - * must not have side effects. dist_code[256] and dist_code[257] are never - * used. - */ - /* =========================================================================== * Output a short LSB first on the stream. * IN assertion: there is enough room in pendingBuf. @@ -226,12 +234,11 @@ local void send_bits(s, value, length) /* the arguments must not have side effects */ /* =========================================================================== - * Initialize the various 'constant' tables. In a multi-threaded environment, - * this function may be called by two threads concurrently, but this is - * harmless since both invocations do exactly the same thing. + * Initialize the various 'constant' tables. */ local void tr_static_init() { +#if defined(GEN_TREES_H) || !defined(STDC) static int static_init_done = 0; int n; /* iterates over tree elements */ int bits; /* bit counter */ @@ -243,12 +250,19 @@ local void tr_static_init() if (static_init_done) return; + /* For some embedded targets, global variables are not initialized: */ + static_l_desc.static_tree = static_ltree; + static_l_desc.extra_bits = extra_lbits; + static_d_desc.static_tree = static_dtree; + static_d_desc.extra_bits = extra_dbits; + static_bl_desc.extra_bits = extra_blbits; + /* Initialize the mapping length (0..255) -> length code (0..28) */ length = 0; for (code = 0; code < LENGTH_CODES-1; code++) { base_length[code] = length; for (n = 0; n < (1< dist code (0..29) */ dist = 0; for (code = 0 ; code < 16; code++) { base_dist[code] = dist; for (n = 0; n < (1< +# endif + +# define SEPARATOR(i, last, width) \ + ((i) == (last)? "\n};\n\n" : \ + ((i) % (width) == (width)-1 ? ",\n" : ", ")) + +void gen_trees_header() +{ + FILE *header = fopen("trees.h", "w"); + int i; + + Assert (header != NULL, "Can't open trees.h"); + fprintf(header, + "/* header created automatically with -DGEN_TREES_H */\n\n"); + + fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); + for (i = 0; i < L_CODES+2; i++) { + fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, + static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); + } + + fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, + static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); + } + + fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n"); + for (i = 0; i < DIST_CODE_LEN; i++) { + fprintf(header, "%2u%s", _dist_code[i], + SEPARATOR(i, DIST_CODE_LEN-1, 20)); + } + + fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); + for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { + fprintf(header, "%2u%s", _length_code[i], + SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); + } + + fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); + for (i = 0; i < LENGTH_CODES; i++) { + fprintf(header, "%1u%s", base_length[i], + SEPARATOR(i, LENGTH_CODES-1, 20)); + } + + fprintf(header, "local const int base_dist[D_CODES] = {\n"); + for (i = 0; i < D_CODES; i++) { + fprintf(header, "%5u%s", base_dist[i], + SEPARATOR(i, D_CODES-1, 10)); + } + + fclose(header); +} +#endif /* GEN_TREES_H */ + /* =========================================================================== * Initialize the tree data structures for a new zlib stream. */ @@ -305,8 +385,6 @@ void _tr_init(s) { tr_static_init(); - s->compressed_len = 0L; - s->l_desc.dyn_tree = s->dyn_ltree; s->l_desc.stat_desc = &static_l_desc; @@ -320,6 +398,7 @@ void _tr_init(s) s->bi_valid = 0; s->last_eob_len = 8; /* enough lookahead for inflate */ #ifdef DEBUG + s->compressed_len = 0L; s->bits_sent = 0L; #endif @@ -413,12 +492,12 @@ local void gen_bitlen(s, desc) deflate_state *s; tree_desc *desc; /* the tree descriptor */ { - ct_data *tree = desc->dyn_tree; - int max_code = desc->max_code; - ct_data *stree = desc->stat_desc->static_tree; - intf *extra = desc->stat_desc->extra_bits; - int base = desc->stat_desc->extra_base; - int max_length = desc->stat_desc->max_length; + ct_data *tree = desc->dyn_tree; + int max_code = desc->max_code; + const ct_data *stree = desc->stat_desc->static_tree; + const intf *extra = desc->stat_desc->extra_bits; + int base = desc->stat_desc->extra_base; + int max_length = desc->stat_desc->max_length; int h; /* heap index */ int n, m; /* iterate over the tree elements */ int bits; /* bit length */ @@ -542,9 +621,9 @@ local void build_tree(s, desc) deflate_state *s; tree_desc *desc; /* the tree descriptor */ { - ct_data *tree = desc->dyn_tree; - ct_data *stree = desc->stat_desc->static_tree; - int elems = desc->stat_desc->elems; + ct_data *tree = desc->dyn_tree; + const ct_data *stree = desc->stat_desc->static_tree; + int elems = desc->stat_desc->elems; int n, m; /* iterate over heap elements */ int max_code = -1; /* largest code with non zero frequency */ int node; /* new node being created */ @@ -792,9 +871,10 @@ void _tr_stored_block(s, buf, stored_len, eof) int eof; /* true if this is the last block for a file */ { send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ +#ifdef DEBUG s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; s->compressed_len += (stored_len + 4) << 3; - +#endif copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ } @@ -814,7 +894,9 @@ void _tr_align(s) { send_bits(s, STATIC_TREES<<1, 3); send_code(s, END_BLOCK, static_ltree); +#ifdef DEBUG s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ +#endif bi_flush(s); /* Of the 10 bits for the empty block, we have already sent * (10 - bi_valid) bits. The lookahead for the last real code (before @@ -824,7 +906,9 @@ void _tr_align(s) if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { send_bits(s, STATIC_TREES<<1, 3); send_code(s, END_BLOCK, static_ltree); +#ifdef DEBUG s->compressed_len += 10L; +#endif bi_flush(s); } s->last_eob_len = 7; @@ -832,10 +916,9 @@ void _tr_align(s) /* =========================================================================== * Determine the best encoding for the current block: dynamic trees, static - * trees or store, and output the encoded block to the zip file. This function - * returns the total compressed length for the file so far. + * trees or store, and output the encoded block to the zip file. */ -ulg _tr_flush_block(s, buf, stored_len, eof) +void _tr_flush_block(s, buf, stored_len, eof) deflate_state *s; charf *buf; /* input block, or NULL if too old */ ulg stored_len; /* length of input block */ @@ -882,25 +965,6 @@ ulg _tr_flush_block(s, buf, stored_len, eof) opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ } - /* If compression failed and this is the first and last block, - * and if the .zip file can be seeked (to rewrite the local header), - * the whole file is transformed into a stored file: - */ -#ifdef STORED_FILE_OK -# ifdef FORCE_STORED_FILE - if (eof && s->compressed_len == 0L) { /* force stored file */ -# else - if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) { -# endif - /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */ - if (buf == (charf*)0) error ("block vanished"); - - copy_block(buf, (unsigned)stored_len, 0); /* without header */ - s->compressed_len = stored_len << 3; - s->method = STORED; - } else -#endif /* STORED_FILE_OK */ - #ifdef FORCE_STORED if (buf != (char*)0) { /* force stored block */ #else @@ -922,25 +986,32 @@ ulg _tr_flush_block(s, buf, stored_len, eof) #endif send_bits(s, (STATIC_TREES<<1)+eof, 3); compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); +#ifdef DEBUG s->compressed_len += 3 + s->static_len; +#endif } else { send_bits(s, (DYN_TREES<<1)+eof, 3); send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, max_blindex+1); compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); +#ifdef DEBUG s->compressed_len += 3 + s->opt_len; +#endif } Assert (s->compressed_len == s->bits_sent, "bad compressed size"); + /* The above check is made mod 2^32, for files larger than 512 MB + * and uLong implemented on 32 bits. + */ init_block(s); if (eof) { bi_windup(s); +#ifdef DEBUG s->compressed_len += 7; /* align on byte boundary */ +#endif } Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, s->compressed_len-7*eof)); - - return s->compressed_len >> 3; } /* =========================================================================== @@ -965,12 +1036,13 @@ int _tr_tally (s, dist, lc) (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); - s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++; + s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; s->dyn_dtree[d_code(dist)].Freq++; } +#ifdef TRUNCATE_BLOCK /* Try to guess if it is profitable to stop the current block here */ - if (s->level > 2 && (s->last_lit & 0xfff) == 0) { + if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { /* Compute an upper bound for the compressed length */ ulg out_length = (ulg)s->last_lit*8L; ulg in_length = (ulg)((long)s->strstart - s->block_start); @@ -985,6 +1057,7 @@ int _tr_tally (s, dist, lc) 100L - out_length*100L/in_length)); if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; } +#endif return (s->last_lit == s->lit_bufsize-1); /* We avoid equality with lit_bufsize because of wraparound at 64K * on 16 bit machines and because stored blocks are restricted to @@ -1014,7 +1087,7 @@ local void compress_block(s, ltree, dtree) Tracecv(isgraph(lc), (stderr," '%c' ", lc)); } else { /* Here, lc is the match length - MIN_MATCH */ - code = length_code[lc]; + code = _length_code[lc]; send_code(s, code+LITERALS+1, ltree); /* send the length code */ extra = extra_lbits[code]; if (extra != 0) { diff --git a/zlib/uncompr.c b/zlib/uncompr.c index 20fd346c1..d10332137 100644 --- a/zlib/uncompr.c +++ b/zlib/uncompr.c @@ -1,9 +1,9 @@ /* uncompr.c -- decompress a memory buffer - * Copyright (C) 1995-1996 Jean-loup Gailly. + * Copyright (C) 1995-1998 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ -/* $Id$ */ +/* @(#) $Id$ */ #include "zlib.h" @@ -22,7 +22,7 @@ enough memory, Z_BUF_ERROR if there was not enough room in the output buffer, or Z_DATA_ERROR if the input data was corrupted. */ -int uncompress (dest, destLen, source, sourceLen) +int ZEXPORT uncompress (dest, destLen, source, sourceLen) Bytef *dest; uLongf *destLen; const Bytef *source; @@ -49,7 +49,7 @@ int uncompress (dest, destLen, source, sourceLen) err = inflate(&stream, Z_FINISH); if (err != Z_STREAM_END) { inflateEnd(&stream); - return err; + return err == Z_OK ? Z_BUF_ERROR : err; } *destLen = stream.total_out; diff --git a/zlib/zconf.h b/zlib/zconf.h index dd168b8b6..6d450fc79 100644 --- a/zlib/zconf.h +++ b/zlib/zconf.h @@ -1,9 +1,9 @@ /* zconf.h -- configuration of the zlib compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h + * Copyright (C) 1995-1998 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h */ -/* $Id$ */ +/* @(#) $Id$ */ #ifndef _ZCONF_H #define _ZCONF_H @@ -16,34 +16,36 @@ # define deflateInit_ z_deflateInit_ # define deflate z_deflate # define deflateEnd z_deflateEnd -# define inflateInit_ z_inflateInit_ +# define inflateInit_ z_inflateInit_ # define inflate z_inflate # define inflateEnd z_inflateEnd -# define deflateInit2_ z_deflateInit2_ +# define deflateInit2_ z_deflateInit2_ # define deflateSetDictionary z_deflateSetDictionary # define deflateCopy z_deflateCopy # define deflateReset z_deflateReset -# define deflateParams z_deflateParams -# define inflateInit2_ z_inflateInit2_ +# define deflateParams z_deflateParams +# define inflateInit2_ z_inflateInit2_ # define inflateSetDictionary z_inflateSetDictionary # define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint # define inflateReset z_inflateReset # define compress z_compress +# define compress2 z_compress2 # define uncompress z_uncompress # define adler32 z_adler32 -# define crc32 z_crc32 +# define crc32 z_crc32 # define get_crc_table z_get_crc_table # define Byte z_Byte # define uInt z_uInt -# define uLong z_uLong -# define Bytef z_Bytef -# define charf z_charf +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf # define intf z_intf -# define uIntf z_uIntf +# define uIntf z_uIntf # define uLongf z_uLongf # define voidpf z_voidpf -# define voidp z_voidp +# define voidp z_voidp #endif #if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32) @@ -72,8 +74,10 @@ #if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC) # define STDC #endif -#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC) -# define STDC +#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__) +# ifndef STDC +# define STDC +# endif #endif #ifndef STDC @@ -87,6 +91,12 @@ # define NO_DUMMY_DECL #endif +/* Old Borland C incorrectly complains about missing returns: */ +#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500) +# define NEED_DUMMY_RETURN +#endif + + /* Maximum value for memLevel in deflateInit2 */ #ifndef MAX_MEM_LEVEL # ifdef MAXSEG_64K @@ -96,13 +106,17 @@ # endif #endif -/* Maximum value for windowBits in deflateInit2 and inflateInit2 */ +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ #ifndef MAX_WBITS # define MAX_WBITS 15 /* 32K LZ77 window */ #endif /* The memory requirements for deflate are (in bytes): - 1 << (windowBits+2) + 1 << (memLevel+9) + (1 << (windowBits+2)) + (1 << (memLevel+9)) that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) plus a few kilobytes for small objects. For example, if you want to reduce the default memory requirements from 256K to 128K, compile with @@ -114,7 +128,7 @@ for small objects. */ - /* Type declarations */ + /* Type declarations */ #ifndef OF /* function prototypes */ # ifdef STDC @@ -134,7 +148,7 @@ /* MSC small or medium model */ # define SMALL_MEDIUM # ifdef _MSC_VER -# define FAR __far +# define FAR _far # else # define FAR far # endif @@ -142,19 +156,68 @@ #if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__)) # ifndef __32BIT__ # define SMALL_MEDIUM -# define FAR __far +# define FAR _far # endif #endif + +/* Compile with -DZLIB_DLL for Windows DLL support */ +#if defined(ZLIB_DLL) +# if defined(_WINDOWS) || defined(WINDOWS) +# ifdef FAR +# undef FAR +# endif +# include +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR _cdecl _export +# endif +# endif +# if defined (__BORLANDC__) +# if (__BORLANDC__ >= 0x0500) && defined (WIN32) +# include +# define ZEXPORT __declspec(dllexport) WINAPI +# define ZEXPORTRVA __declspec(dllexport) WINAPIV +# else +# if defined (_Windows) && defined (__DLL__) +# define ZEXPORT _export +# define ZEXPORTVA _export +# endif +# endif +# endif +#endif + +#if defined (__BEOS__) +# if defined (ZLIB_DLL) +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +#endif + +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif +#ifndef ZEXTERN +# define ZEXTERN extern +#endif + #ifndef FAR # define FAR #endif +#if !defined(MACOS) && !defined(TARGET_OS_MAC) typedef unsigned char Byte; /* 8 bits */ +#endif typedef unsigned int uInt; /* 16 bits or more */ typedef unsigned long uLong; /* 32 bits or more */ -#if defined(__BORLANDC__) && defined(SMALL_MEDIUM) - /* Borland C/C++ ignores FAR inside typedef */ +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ # define Bytef Byte FAR #else typedef Byte FAR Bytef; @@ -172,13 +235,45 @@ typedef uLong FAR uLongf; typedef Byte *voidp; #endif +#ifdef HAVE_UNISTD_H +# include /* for off_t */ +# include /* for SEEK_* and off_t */ +# define z_off_t off_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif -/* Compile with -DZLIB_DLL for Windows DLL support */ -#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL) -# include -# define EXPORT WINAPI -#else -# define EXPORT +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(inflate_blocks,"INBL") +# pragma map(inflate_blocks_new,"INBLNE") +# pragma map(inflate_blocks_free,"INBLFR") +# pragma map(inflate_blocks_reset,"INBLRE") +# pragma map(inflate_codes_free,"INCOFR") +# pragma map(inflate_codes,"INCO") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_flush,"INFLU") +# pragma map(inflate_mask,"INMA") +# pragma map(inflate_set_dictionary,"INSEDI2") +# pragma map(inflate_copyright,"INCOPY") +# pragma map(inflate_trees_bits,"INTRBI") +# pragma map(inflate_trees_dynamic,"INTRDY") +# pragma map(inflate_trees_fixed,"INTRFI") +# pragma map(inflate_trees_free,"INTRFR") #endif #endif /* _ZCONF_H */ diff --git a/zlib/zlib.h b/zlib/zlib.h index 5ab3cdfb3..49f56b43b 100644 --- a/zlib/zlib.h +++ b/zlib/zlib.h @@ -1,7 +1,7 @@ /* zlib.h -- interface of the 'zlib' general purpose compression library - version 1.0.4, Jul 24th, 1996. + version 1.1.3, July 9th, 1998 - Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler + Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages @@ -19,8 +19,8 @@ misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. - Jean-loup Gailly Mark Adler - gzip@prep.ai.mit.edu madler@alumni.caltech.edu + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu The data format used by the zlib library is described by RFCs (Request for @@ -31,36 +31,33 @@ #ifndef _ZLIB_H #define _ZLIB_H +#include "zconf.h" + #ifdef __cplusplus extern "C" { #endif -#include "zconf.h" +#define ZLIB_VERSION "1.1.3" -#define ZLIB_VERSION "1.0.4" - -/* +/* The 'zlib' compression library provides in-memory compression and decompression functions, including integrity checks of the uncompressed data. This version of the library supports only one compression method - (deflation) but other algorithms may be added later and will have the same + (deflation) but other algorithms will be added later and will have the same stream interface. - For compression the application must provide the output buffer and - may optionally provide the input buffer for optimization. For decompression, - the application must provide the input buffer and may optionally provide - the output buffer for optimization. - Compression can be done in a single step if the buffers are large enough (for example if an input file is mmap'ed), or can be done by repeated calls of the compression function. In the latter case, the application must provide more input and/or consume the output (providing more output space) before each call. - The library does not install any signal handler. It is recommended to - add at least a handler for SIGSEGV when decompressing; the library checks - the consistency of the input data whenever possible but may go nuts - for some forms of corrupted input. + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. */ typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); @@ -69,24 +66,24 @@ typedef void (*free_func) OF((voidpf opaque, voidpf address)); struct internal_state; typedef struct z_stream_s { - Bytef *next_in; /* next input byte */ - uInt avail_in; /* number of bytes available at next_in */ - uLong total_in; /* total nb of input bytes read so far */ + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ Bytef *next_out; /* next output byte should be put there */ uInt avail_out; /* remaining free space at next_out */ uLong total_out; /* total nb of bytes output so far */ - char *msg; /* last error message, NULL if no error */ + char *msg; /* last error message, NULL if no error */ struct internal_state FAR *state; /* not visible by applications */ - alloc_func zalloc; /* used to allocate the internal state */ - free_func zfree; /* used to free the internal state */ - voidpf opaque; /* private data object passed to zalloc and zfree */ + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ - int data_type; /* best guess about the data type: ascii or binary */ - uLong adler; /* adler32 value of the uncompressed data */ - uLong reserved; /* reserved for future use */ + int data_type; /* best guess about the data type: ascii or binary */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ } z_stream; typedef z_stream FAR *z_streamp; @@ -104,6 +101,9 @@ typedef z_stream FAR *z_streamp; opaque value. zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + On 16-bit systems, the functions zalloc and zfree must be able to allocate exactly 65536 bytes, but will not be required to allocate more than this if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, @@ -120,18 +120,18 @@ typedef z_stream FAR *z_streamp; a single step). */ - /* constants */ + /* constants */ -#define Z_NO_FLUSH 0 -#define Z_PARTIAL_FLUSH 1 -#define Z_SYNC_FLUSH 2 -#define Z_FULL_FLUSH 3 -#define Z_FINISH 4 +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 /* Allowed flush values; see deflate() below for details */ -#define Z_OK 0 -#define Z_STREAM_END 1 -#define Z_NEED_DICT 2 +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 #define Z_ERRNO (-1) #define Z_STREAM_ERROR (-2) #define Z_DATA_ERROR (-3) @@ -142,14 +142,14 @@ typedef z_stream FAR *z_streamp; * values are errors, positive values are used for special but normal events. */ -#define Z_NO_COMPRESSION 0 -#define Z_BEST_SPEED 1 -#define Z_BEST_COMPRESSION 9 +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 #define Z_DEFAULT_COMPRESSION (-1) /* compression levels */ -#define Z_FILTERED 1 -#define Z_HUFFMAN_ONLY 2 +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 #define Z_DEFAULT_STRATEGY 0 /* compression strategy; see deflateInit2() below for details */ @@ -161,22 +161,22 @@ typedef z_stream FAR *z_streamp; #define Z_DEFLATED 8 /* The deflate compression method (the only one supported in this version) */ -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ #define zlib_version zlibVersion() /* for compatibility with versions < 1.0.2 */ - /* basic functions */ + /* basic functions */ -extern const char * EXPORT zlibVersion OF((void)); +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); /* The application can compare zlibVersion and ZLIB_VERSION for consistency. If the first character differs, the library code actually used is not compatible with the zlib.h header file used by the application. This check is automatically made by deflateInit and inflateInit. */ -/* -extern int EXPORT deflateInit OF((z_streamp strm, int level)); +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); Initializes the internal stream state for compression. The fields zalloc, zfree and opaque must be initialized before by the caller. @@ -198,9 +198,15 @@ extern int EXPORT deflateInit OF((z_streamp strm, int level)); */ -extern int EXPORT deflate OF((z_streamp strm, int flush)); +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); /* - Performs one or both of the following actions: + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: - Compress more input starting at next_in and update next_in and avail_in accordingly. If not all input can be processed (because there is not @@ -222,24 +228,23 @@ extern int EXPORT deflate OF((z_streamp strm, int flush)); and with zero avail_out, it must be called again after making room in the output buffer because there might be more output pending. - If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression - block is terminated and flushed to the output buffer so that the - decompressor can get all input data available so far. For method 9, a future - variant on method 8, the current block will be flushed but not terminated. - Z_SYNC_FLUSH has the same effect as partial flush except that the compressed - output is byte aligned (the compressor can clear its internal bit buffer) - and the current block is always terminated; this can be useful if the - compressor has to be restarted from scratch after an interruption (in which - case the internal state of the compressor may be lost). - If flush is set to Z_FULL_FLUSH, the compression block is terminated, a - special marker is output and the compression dictionary is discarded; this - is useful to allow the decompressor to synchronize if one compressed block - has been damaged (see inflateSync below). Flushing degrades compression and - so should be used only when necessary. Using Z_FULL_FLUSH too often can - seriously degrade the compression. If deflate returns with avail_out == 0, - this function must be called again with the same value of the flush - parameter and more output space (updated avail_out), until the flush is - complete (deflate returns with non-zero avail_out). + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + the compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). If the parameter flush is set to Z_FINISH, pending input is processed, pending output is flushed and deflate returns with Z_STREAM_END if there @@ -248,12 +253,15 @@ extern int EXPORT deflate OF((z_streamp strm, int flush)); more input data, until it returns with Z_STREAM_END or an error. After deflate has returned Z_STREAM_END, the only possible operations on the stream are deflateReset or deflateEnd. - + Z_FINISH can be used immediately after deflateInit if all the compression is to be done in a single step. In this case, avail_out must be at least 0.1% larger than avail_in plus 12 bytes. If deflate does not return Z_STREAM_END, then it must be called again as described above. + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + deflate() may update data_type if it can make a good guess about the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered binary. This field is only for information purposes and does not affect @@ -263,11 +271,12 @@ extern int EXPORT deflate OF((z_streamp strm, int flush)); processed or more output produced), Z_STREAM_END if all input has been consumed and all output has been produced (only when flush is set to Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example - if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible. + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). */ -extern int EXPORT deflateEnd OF((z_streamp strm)); +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); /* All dynamically allocated data structures for this stream are freed. This function discards any unprocessed input and does not flush any @@ -281,25 +290,36 @@ extern int EXPORT deflateEnd OF((z_streamp strm)); */ -/* -extern int EXPORT inflateInit OF((z_streamp strm)); +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); Initializes the internal stream state for decompression. The fields - zalloc, zfree and opaque must be initialized before by the caller. If - zalloc and zfree are set to Z_NULL, inflateInit updates them to use default - allocation functions. + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. - inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_VERSION_ERROR if the zlib library version is incompatible - with the version assumed by the caller. msg is set to null if there is no - error message. inflateInit does not perform any decompression: this will be - done by inflate(). + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) */ -extern int EXPORT inflate OF((z_streamp strm, int flush)); +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); /* - Performs one or both of the following actions: + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may some + introduce some output latency (reading input without producing any output) + except when forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: - Decompress more input starting at next_in and update next_in and avail_in accordingly. If not all input can be processed (because there is not @@ -320,9 +340,9 @@ extern int EXPORT inflate OF((z_streamp strm, int flush)); must be called again after making room in the output buffer because there might be more output pending. - If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much + If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much output as possible to the output buffer. The flushing behavior of inflate is - not specified for values of the flush parameter other than Z_PARTIAL_FLUSH + not specified for values of the flush parameter other than Z_SYNC_FLUSH and Z_FINISH, but the current implementation actually flushes as much output as possible anyway. @@ -337,22 +357,30 @@ extern int EXPORT inflate OF((z_streamp strm, int flush)); is never required, but can be used to inform inflate that a faster routine may be used for the single inflate() call. - inflate() returns Z_OK if some progress has been made (more input - processed or more output produced), Z_STREAM_END if the end of the - compressed data has been reached and all uncompressed output has been - produced, Z_NEED_DICT if a preset dictionary is needed at this point (see - inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted, - Z_STREAM_ERROR if the stream structure was inconsistent (for example if - next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, - Z_BUF_ERROR if no progress is possible or if there was not enough room in - the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the - application may then call inflateSync to look for a good compression block. - In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the - dictionary chosen by the compressor. + If a preset dictionary is needed at this point (see inflateSetDictionary + below), inflate sets strm-adler to the adler32 checksum of the + dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise + it sets strm->adler to the adler32 checksum of all output produced + so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or + an error code as described below. At the end of the stream, inflate() + checks that its computed adler32 checksum is equal to that saved by the + compressor and returns Z_STREAM_END only if the checksum is correct. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect + adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent + (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if no progress is possible or if there was not + enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR + case, the application may then call inflateSync to look for a good + compression block. */ -extern int EXPORT inflateEnd OF((z_streamp strm)); +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); /* All dynamically allocated data structures for this stream are freed. This function discards any unprocessed input and does not flush any @@ -363,33 +391,32 @@ extern int EXPORT inflateEnd OF((z_streamp strm)); static string (which must not be deallocated). */ - /* Advanced functions */ + /* Advanced functions */ /* The following functions are needed only in some special applications. */ -/* -extern int EXPORT deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, - int memLevel, - int strategy)); +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); This is another version of deflateInit with more compression options. The fields next_in, zalloc, zfree and opaque must be initialized before by the caller. The method parameter is the compression method. It must be Z_DEFLATED in - this version of the library. (Method 9 will allow a 64K history buffer and - partial block flushes.) + this version of the library. The windowBits parameter is the base two logarithm of the window size (the size of the history buffer). It should be in the range 8..15 for this - version of the library (the value 16 will be allowed for method 9). Larger - values of this parameter result in better compression at the expense of - memory usage. The default value is 15 if deflateInit is used instead. + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. The memLevel parameter specifies how much memory should be allocated for the internal compression state. memLevel=1 uses minimum memory but @@ -408,42 +435,35 @@ extern int EXPORT deflateInit2 OF((z_streamp strm, the compression ratio but not the correctness of the compressed output even if it is not set appropriately. - If next_in is not null, the library will use this buffer to hold also - some history information; the buffer must either hold the entire input - data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in - is null, the library will allocate its own history buffer (and leave next_in - null). next_out need not be provided here but must be provided by the - application for the next call of deflate(). - - If the history buffer is provided by the application, next_in must - must never be changed by the application since the compressor maintains - information inside this buffer from call to call; the application - must provide more input only by increasing avail_in. next_in is always - reset by the library in this case. - - deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was - not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as - an invalid method). msg is set to null if there is no error message. - deflateInit2 does not perform any compression: this will be done by - deflate(). + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). */ - -extern int EXPORT deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); /* - Initializes the compression dictionary (history buffer) from the given - byte sequence without producing any compressed output. This function must - be called immediately after deflateInit or deflateInit2, before any call - of deflate. The compressor and decompressor must use exactly the same + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same dictionary (see inflateSetDictionary). + The dictionary should consist of strings (byte sequences) that are likely to be encountered later in the data to be compressed, with the most commonly used strings preferably put towards the end of the dictionary. Using a - dictionary is most useful when the data to be compressed is short and - can be predicted with good accuracy; the data can then be compressed better - than with the default empty dictionary. In this version of the library, - only the last 32K bytes of the dictionary are used. + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. + Upon return of this function, strm->adler is set to the Adler32 value of the dictionary; the decompressor may later use this value to determine which dictionary has been used by the compressor. (The Adler32 value @@ -451,21 +471,16 @@ extern int EXPORT deflateSetDictionary OF((z_streamp strm, actually used by the compressor.) deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a - parameter is invalid (such as NULL dictionary) or the stream state - is inconsistent (for example if deflate has already been called for this - stream). deflateSetDictionary does not perform any compression: this will - be done by deflate(). + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). */ -extern int EXPORT deflateCopy OF((z_streamp dest, - z_streamp source)); +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); /* - Sets the destination stream as a complete copy of the source stream. If - the source stream is using an application-supplied history buffer, a new - buffer is allocated for the destination stream. The compressed output - buffer is always application-supplied. It's the responsibility of the - application to provide the correct values of next_out and avail_out for the - next call of deflate. + Sets the destination stream as a complete copy of the source stream. This function can be useful when several compression strategies will be tried, for example when there are several ways of pre-processing the input @@ -480,7 +495,7 @@ extern int EXPORT deflateCopy OF((z_streamp dest, destination. */ -extern int EXPORT deflateReset OF((z_streamp strm)); +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); /* This function is equivalent to deflateEnd followed by deflateInit, but does not free and reallocate all the internal compression state. @@ -491,14 +506,17 @@ extern int EXPORT deflateReset OF((z_streamp strm)); stream state was inconsistent (such as zalloc or state being NULL). */ -extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy)); +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); /* - Dynamically update the compression level and compression strategy. - This can be used to switch between compression and straight copy of - the input data, or to switch to a different kind of input data requiring - a different strategy. If the compression level is changed, the input - available so far is compressed with the old level (and may be flushed); - the new level will take effect only at the next call of deflate(). + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). Before the call of deflateParams, the stream state must be set as for a call of deflate(), since the currently available input may have to @@ -509,50 +527,38 @@ extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy)); if strm->avail_out was zero. */ -/* -extern int EXPORT inflateInit2 OF((z_streamp strm, - int windowBits)); +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); - This is another version of inflateInit with more compression options. The - fields next_out, zalloc, zfree and opaque must be initialized before by - the caller. + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. The windowBits parameter is the base two logarithm of the maximum window size (the size of the history buffer). It should be in the range 8..15 for - this version of the library (the value 16 will be allowed soon). The - default value is 15 if inflateInit is used instead. If a compressed stream - with a larger window size is given as input, inflate() will return with - the error code Z_DATA_ERROR instead of trying to allocate a larger window. + this version of the library. The default value is 15 if inflateInit is used + instead. If a compressed stream with a larger window size is given as + input, inflate() will return with the error code Z_DATA_ERROR instead of + trying to allocate a larger window. - If next_out is not null, the library will use this buffer for the history - buffer; the buffer must either be large enough to hold the entire output - data, or have at least 1< +/* @(#) $Id$ */ #include "zutil.h" @@ -28,12 +26,18 @@ const char *z_errmsg[10] = { ""}; -const char *zlibVersion() +const char * ZEXPORT zlibVersion() { return ZLIB_VERSION; } #ifdef DEBUG + +# ifndef verbose +# define verbose 0 +# endif +int z_verbose = verbose; + void z_error (m) char *m; { @@ -42,11 +46,21 @@ void z_error (m) } #endif +/* exported to allow conversion of error code to string for compress() and + * uncompress() + */ +const char * ZEXPORT zError(err) + int err; +{ + return ERR_MSG(err); +} + + #ifndef HAVE_MEMCPY void zmemcpy(dest, source, len) Bytef* dest; - Bytef* source; + const Bytef* source; uInt len; { if (len == 0) return; @@ -56,8 +70,8 @@ void zmemcpy(dest, source, len) } int zmemcmp(s1, s2, len) - Bytef* s1; - Bytef* s2; + const Bytef* s1; + const Bytef* s2; uInt len; { uInt j; @@ -164,7 +178,7 @@ void zcfree (voidpf opaque, voidpf ptr) # define MY_ZCALLOC -#if (!defined(_MSC_VER) || (_MSC_VER < 600)) +#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) # define _halloc halloc # define _hfree hfree #endif diff --git a/zlib/zutil.h b/zlib/zutil.h index 8a338a1e7..6f2cb97ca 100644 --- a/zlib/zutil.h +++ b/zlib/zutil.h @@ -1,5 +1,5 @@ /* zutil.h -- internal interface and configuration of the compression library - * Copyright (C) 1995-1996 Jean-loup Gailly. + * Copyright (C) 1995-1998 Jean-loup Gailly. * For conditions of distribution and use, see copyright notice in zlib.h */ @@ -8,23 +8,23 @@ subject to change. Applications should only use zlib.h. */ -/* $Id$ */ +/* @(#) $Id$ */ #ifndef _Z_UTIL_H #define _Z_UTIL_H #include "zlib.h" -#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS) -# include -# include -#else - extern int errno; -#endif #ifdef STDC +# include # include # include #endif +#ifdef NO_ERRNO_H + extern int errno; +#else +# include +#endif #ifndef local # define local static @@ -75,8 +75,14 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ #ifdef MSDOS # define OS_CODE 0x00 -# ifdef __TURBOC__ -# include +# if defined(__TURBOC__) || defined(__BORLANDC__) +# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__)) + /* Allow compilation with ANSI keywords only enabled */ + void _Cdecl farfree( void *block ); + void *_Cdecl farmalloc( unsigned long nbytes ); +# else +# include +# endif # else /* MSC or DJGPP */ # include # endif @@ -92,7 +98,7 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ #if defined(VAXC) || defined(VMS) # define OS_CODE 0x02 -# define FOPEN(name, mode) \ +# define F_OPEN(name, mode) \ fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512") #endif @@ -104,8 +110,15 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ # define OS_CODE 0x05 #endif -#ifdef MACOS +#if defined(MACOS) || defined(TARGET_OS_MAC) # define OS_CODE 0x07 +# if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fdopen */ +# else +# ifndef fdopen +# define fdopen(fd,mode) NULL /* No fdopen() */ +# endif +# endif #endif #ifdef __50SERIES /* Prime/PRIMOS */ @@ -120,14 +133,19 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ # define fdopen(fd,mode) NULL /* No fdopen() */ #endif +#if (defined(_MSC_VER) && (_MSC_VER > 600)) +# define fdopen(fd,type) _fdopen(fd,type) +#endif + + /* Common defaults */ #ifndef OS_CODE # define OS_CODE 0x03 /* assume Unix */ #endif -#ifndef FOPEN -# define FOPEN(name, mode) fopen((name), (mode)) +#ifndef F_OPEN +# define F_OPEN(name, mode) fopen((name), (mode)) #endif /* functions */ @@ -142,9 +160,10 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ #if defined(pyr) # define NO_MEMCPY #endif -#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER) +#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__) /* Use our own functions for small and medium model with MSC <= 5.0. * You may have to use the same strategy for Borland C (untested). + * The __SC__ check is for Symantec. */ # define NO_MEMCPY #endif @@ -162,24 +181,22 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ # define zmemzero(dest, len) memset(dest, 0, len) # endif #else - extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len)); - extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len)); + extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len)); + extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len)); extern void zmemzero OF((Bytef* dest, uInt len)); #endif /* Diagnostic functions */ #ifdef DEBUG # include -# ifndef verbose -# define verbose 0 -# endif + extern int z_verbose; extern void z_error OF((char *m)); # define Assert(cond,msg) {if(!(cond)) z_error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +# define Trace(x) {if (z_verbose>=0) fprintf x ;} +# define Tracev(x) {if (z_verbose>0) fprintf x ;} +# define Tracevv(x) {if (z_verbose>1) fprintf x ;} +# define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;} +# define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;} #else # define Assert(cond,msg) # define Trace(x) @@ -190,8 +207,8 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */ #endif -typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len)); - +typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf, + uInt len)); voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); void zcfree OF((voidpf opaque, voidpf ptr));